A limit on top quark pair production at future electron-proton colliders

arXiv:2602.18809 · hep-ph · Submitted 2026-02-21 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.

Kai: We're looking at the paper: "A limit on top quark pair production at future electron-proton colliders".

Mira: Here's the gist of the paper. The paper analyzes the limit on top quark pair production at future electron-proton colliders by studying structure functions and cross-sections using collinear factorization to establish bounds on top structure functions.

Kai: The ratio of the structure functions for deep inelastic scattering in top pair production at future electron-proton colliders is analyzed at a fixed √s and Q2 relative to the minimum value of x given by Q2/s using collinear factorization.

Mira: This compact formula for the ratio FL2(Q2/s, Q2, mt) is useful for extracting a bound on the top structure function.

Kai: The reduced cross-section for top production at this limit is determined, establishing a bound value for tt production at the LHeC and FCC-eh center-of-mass energies based on renormalization scales.

Paper summary: Kai: So, this paper looks at setting a limit on how much top quark pair production we can expect at future electron proton colliders. It does this by looking closely at the structure functions and cross-sections using collinear factorization to put bounds on those top structure functions.

Mira: Exactly. The core idea is they analyze the ratio of these structure functions for deep inelastic scattering in top pair production, specifically at a fixed center of mass energy and momentum transfer squared relative to the minimum value of x, which is Q squared over s using collinear factorization.

Lev: That compact formula for the ratio FL2(Q squared over s, Q2, mt) is what they use to extract a bound on the top structure function. That seems like a very useful tool for constraining what we can expect experimentally.

Kai: And once they have that bound, they determine the reduced cross-section for top production at this limit. This establishes a bound value for top quark pair production at both the LHeC and FCC-eh center of mass energies, based on those renormalization scales.

Mira: They also apply a modification of Bjorken scaling to this bound of the reduced top cross-section at the scale equal to Q squared plus four times mt squared, which improves how that scaling quantity behaves when Q squared is less than four times mt squared.

Lev: That modification is important because it helps improve the scaling quantity in that lower momentum transfer region, which is where things get tricky for the calculations.

Kai: They examine the behavior of this reduced cross-section at x minimum for both LHeC and FCC-eh center of mass energies, applying that Bjorken scaling modification at that scale equal to Q squared plus four times mt squared.

Mira: The paper notes a moderate slope in the ratio FL2 when Q squared is less than one hundred five gigaparsecs squared relative to the scale equal to Q squared plus four times mt squared.

Lev: And they find that the approximation sigma t r over mu two equals s m two t is dominant for momentum transfer squared less than four times mt squared, and that's where they validate the saturation of the dipole cross-section.

Kai: So, when you look at what this means for us, these results suggest there will be limited behavior in observing top saturation in future electron proton colliders based on the bound behavior they found.

Mira: They also explore how the integrated gluon distribution function is obtained from the unintegrated gluon distribution in the proton and nucleus using a correspondence between that color dipole picture and the kt factorisation formalism.

Lev: That unintegrated gluon distribution is what you get when you use those formalisms, but for real hardware, we have to worry about how much overhead that calculation adds to running it.

Kai: The saturation scale is defined as Q over s times x zero minus lambda, and that scale marks the transition between a dilute gluon system and a saturated one, which is valid at moderate momentum transfer squared values.

Paper summary: Mira: And they also discuss how the top quark structure functions are driven at small x by gluons in the collinear generalized double asymptotic scaling approach, which involves a convolution integral represented by an 'alpha' times 'x g' term.

Lev: That convolution integral is what you get when you take that product of the gluon distribution and the coefficient function, but for real hardware, we have to make sure we can calculate that integral accurately.

Kai: The results at the leading order approximation give a bound limit for both LHeC and FCC center of mass energies, which leads to a bound on top structure functions as FL F2 over s over mt is less than zero point two five nine minus zero point two eight eight.

Mira: That specific numerical bound on the top structure function is what they get from the leading order approximation for the LHeC and FCC center of mass energies.

Lev: For us, that number tells us how tight our constraints are on these fundamental QCD parameters when we try to run these experiments on real hardware.

Kai: They also look at experimental predictions, saying that the total cross-section for top anti top quark pairs at photoproduction is expected to be zero point zero five picobarn at the LHeC.

Mira: And they connect this to observations of top anti top quark pairs production in proton proton collisions, specifically looking at Higgs boson mass of one hundred twenty-five point zero nine giga electron volt for a Higgs boson.

Lev: Measuring Higgs boson production in association with a top anti top pair is crucial for understanding the coupling between the top quark and the Higgs boson at those LHeC and FCC-eh center of mass energies compared to beyond the standard model theories.

Kai: They also suggest that future electron proton colliders should certainly consider the longitudinal structure function for top production at momentum transfer squared equal to Q squared plus four times mt squared as an important topic for physics.

Mira: So, to summarize, this paper provides a bound on top quark pair production by analyzing the ratio of structure functions and determining a reduced cross-section limit for future colliders like the LHeC and FCC-eh.

Lev: And it gives us concrete constraints on those structure functions based on the leading order approximation, which we then refine with Bjorken scaling modifications.

Kai: The implication is that we have a way to set limits on top quark production at very high energies using these electron proton colliders, even before they are fully operational.

Mira: It's about testing quantum chromodynamics through the study of Higgs boson production in top pair processes, which is a process that is already crucial at the LHC.

Lev: From an engineering standpoint, it shows us where the precision needs to be pushed when trying to implement these calculations on real machines.

Kai: This work sets a clear boundary for what we can expect from these future colliders concerning top quark pair production rates.

Conclusion: Kai: So, we've been looking at how these structure functions constrain top quark production at future electron proton colliders. Now we get to the end of this paper, so let's talk about what it really means for the title and who wrote it.

Mira: It’s a paper titled "A limit on top quark pair production at future electron-proton colliders." Basically, they took all that math—all those structure functions and cross-sections—and they put a hard ceiling on how much top quark pairs we can expect to see when we run these machines like the LHeC or the FCC-eh.

Lev: So what’s the actual implication? It shows us exactly what our experimental limits should be, based on current theoretical understanding. It's not just a prediction; it's a constraint on the physics itself.

Kai: Right, so it means that before we even build these colliders, we have a bound on top quark production rates. We’re looking at how those structure functions behave when you push the energy up to very high values of s and Q squared.

Mira: The authors use this ratio of structure functions to get that limit. It's a compact formula they developed, and it’s really smart because it helps us see the top structure function in a way that’s easier to handle theoretically.

Lev: From my side, what they do is give us concrete numbers based on those renormalization scales. Those are the scales where we actually have to worry about running the experiment on real hardware, so those bounds are very useful for planning precision.

Kai: So it boils down to this: we know the theoretical limits based on QCD and factorization methods, and now we have a numerical bound for top quark pairs at those future energies. It tells us what kind of signal we should be looking for.

Mira: And they also hint at something else—that the longitudinal structure function is a major piece of physics to consider when we talk about top production at those high momentum transfer squared values, specifically when Q squared is equal to four times mt squared.

Lev: That sounds like a crucial point for our error-correction work because it points us toward where we might need more precise measurements or different theoretical tools. We’ll see how that longitudinal structure function plays out in the next piece of research.

Razi University

hep-ph

Submitted: 2026-02-21

Updated: 2026-02-21

Journal ref: Annals of Physics 496 (2027) 170807

DOI: 10.1016/j.aop.2026.170807

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 75/100

The gist: The paper analyzes the limit on top quark pair production at future electron-proton colliders by studying structure functions and cross-sections using collinear factorization to establish bounds on…

Key concepts

Collinear Factorization
This theoretical framework is used to relate the measured cross-sections of top pair production in electron-proton collisions to the internal structure of the proton. It allows physicists to separate the hard scattering process from the long-distance interactions, enabling calculations based on known parton distributions.
Structure Functions (F_t k)
These functions describe how partons (like gluons) inside a proton are distributed and interact when probed at different energy scales. The paper uses them to derive bounds on the properties of the top quark structure function, which is crucial for predicting production rates.
Saturation Scale (Q2s)
The saturation scale marks a critical point in the gluon system where non-linear effects become important, transitioning from a dilute to a saturated regime. It is defined by a specific relation involving Q2 and x, indicating when the simple linear description of gluons breaks down.
Longitudinal Structure Function
This function describes the distribution of partons with longitudinal momentum fractions. The paper suggests that studying this specific component at high Q2 and low x is a vital area for future experiments like LHeC and FCC-eh.

Terminology

Summary

The paper analyzes the limit on top quark pair production at future electron-proton colliders by studying structure functions and cross-sections using collinear factorization to establish bounds on top structure functions. p. 0

Where the paper says it

A limit on top quark pair production at future electron-proton colliders G. Boroun∗ Department of physics, Razi University, Kermanshah 67149, Iran (Dated: February 24, 2026) The ratio of the structure functions for deep inelastic scattering in top pair production at future electron-proton colliders is analyzed at a fixed √ s and Q 2 relative to the minimum value of x given by Q 2 /s using collinear factorization.

The ratio of the structure functions for deep inelastic scattering in top pair production at future electron-proton colliders is analyzed at a fixed √s and Q2 relative to the minimum value of x given by Q2/s using collinear factorization. p. 0

Where the paper says it

A limit on top quark pair production at future electron-proton colliders G. Boroun∗ Department of physics, Razi University, Kermanshah 67149, Iran (Dated: February 24, 2026) The ratio of the structure functions for deep inelastic scattering in top pair production at future electron-proton colliders is analyzed at a fixed √ s and Q 2 relative to the minimum value of x given by Q 2 /s using collinear factorization.

This compact formula for the ratio FL2(Q2/s, Q2, mt) is useful for extracting a bound on the top structure function. p. 0
Where the paper says it

Boroun∗ Department of physics, Razi University, Kermanshah 67149, Iran (Dated: February 24, 2026) The ratio of the structure functions for deep inelastic scattering in top pair production at future electron-proton colliders is analyzed at a fixed √ s and Q 2 relative to the minimum value of x given by Q 2 /s using collinear factorization. This compact formula for the ratio FL2(Q 2 /s, Q2 , mt) is useful for extracting a bound on the top structure function.

The reduced cross-section for top production at this limit is determined, establishing a bound value for tt production at the LHeC and FCC-eh center-of-mass energies based on renormalization scales. p. 0
Where the paper says it

This compact formula for the ratio FL2(Q 2 /s, Q2 , mt) is useful for extracting a bound on the top structure function. The reduced cross-section for top production at this limit is determined, establishing a bound value for tt production at the LHeC and FCC-eh center-of-mass energies based on renormalization scales.

Theoretical Framework and Scaling

The theoretical framework involves defining the interaction Lagrangian density due to the electromagnetic coupling in ep→ttX pair production. The total cross-section for large values of √s is provided by the equation. p. 1

Where the paper says it

ee and et represent the electric charge of the electron and top-quark in units of √ 4παem, where αem is the fine structure constant. According to the Weizs¨acker-Williams2 approximation [21–23], the total cross-section for large values of √ s is provided by the equation: σ = Z 1 ymin dyPγ(y) Z 1 zmin dzxg(z, µF )σ.

The corresponding hadron-level cross sections σt k=2,L in accordance with the WW approximation in the fixed-flavor-number scheme (FFNS) are defined by the following form. p. 1
Where the paper says it

b (3) Here, Pγ is the photon-splitting function and σb is the cross section of the tt pair production by a real photon, where zmin = µ 2/(ys). The corresponding hadron-level cross sections, σ t k=2,L in accordance with the WW approximation in the fixed-flavor-number scheme (FFNS), are defined by the following form [19, 20, 24] σ t k = Z 1 zmin dzG(z, µF )σb t k,g( x z , µF , µR), (4) where σb t k,g, (k = 2, L) are the γ ∗ g cross sections of the photon -gluon component of the heavy-quark leptoproduction at the LO approximation, given by: γ ∗ + g→t + t.

The leptoproduction cross sections σt k=2,L(x, Q2) are related to the DIS structure functions F t k(x, Q2). p. 1
Where the paper says it

The default renormalisation and factorization scales are set to be equal µ 2 R = Q2+4m2 t and µ 2 F = Q2 . The leptoproduction cross sections σ t k=2,L(x, Q2 ) are related to the DIS structure functions F t k (x, Q2 ).

Bounds and Saturation Behavior

In the collinear generalized DAS approaches, the top quark structure functions are driven at small x by gluons as F t k(x, Q2) = e2t X n=0 a n+1 s(Q2)/B(n) k,g (x, a)⊗xg(x, Q2), where a = m2t/Q2 and as(Q2) = αs(Q2)/4π. The results at the LO approximation have a bound limit for the LHeC and FCC center-of-mass (COM) energies. p. 2

Where the paper says it

(11), respectively. In this figure we observe that the results at the LO approximation have a bound limit for the LHeC and FCC center-of-mass (COM) energies.

The bound values lead to the bound of top structure functions as FL F2(Q2, s, mt)≤0. p. 3
Where the paper says it

These values are comparable to the bounds in the color dipole model (CDM) [39, 40]. Because, the gluon density has to be non-negative, the bound values lead to the bound of top structure functions as FL F2 (Q 2 , s, mt)≤0.

259 − 0.288.

Kinematic Dependencies and Cross-Sections

The integrated gluon distribution function, xg(x, Q2) is obtained from the unintegrated gluon distribution (UGD) in the proton and nucleus using the correspondence between the color dipole picture and the kt-factorization formalism. The saturation scale marks the transition between the dilute and saturated gluon system, defined as Q2s(x) = Q20(x/x0) −λ and is valid at moderate Q2 values. p. 3

Where the paper says it

The saturation scale marks the transition between the dilute and saturated gluon system. It is defined as Q2 s (x) = Q2 0 (x/x0) −λ and is valid at moderate Q2 values.

The dipole cross section is related to the UGD through a Fourier transform. p. 4
Where the paper says it

αsF(x, kt) = 3σ0 4π 2 (k 2 t /Q2 s ) exp(−k 2 t /Q2 s ). (13) The dipole cross section is related to the UGD through a Fourier transform [49, 50].

Experimental Predictions and Significance

The LHeC and FCC-eh will explore the strange density and momentum fraction carried by top quarks, as the total cross-section of top-antitop quark pairs (tt) at photoproduction is expected to be 0.05 pb at the LHeC. p. 0

Where the paper says it

This compact formula for the ratio FL2(Q 2 /s, Q2 , mt) is useful for extracting a bound on the top structure function. The reduced cross-section for top production at this limit is determined, establishing a bound value for tt production at the LHeC and FCC-eh center-of-mass energies based on renormalization scales.

The observation of ttH production is based on a combined analysis of proton-proton collision data at COM energies of √s = 7, 8, and 13 TeV for a Higgs boson mass of 125. p. 7
Where the paper says it

The CP nature of the top-antitop-Higgs coupling can be analysed at the LHeC in ep→ettH production [1, 68]. The observation of ttH production is based on a combined analysis of proton-proton collision data at COM energies of √ s = 7, 8, and 13 TeV for a Higgs boson mass of 125.

09 GeV. Measuring Higgs boson production in association with a tt pair is crucial for understanding the top-quark couplings to the Higgs boson at the LHeC and FCC-eh COM energies compared to beyond-the-StandardModel(BSM) theories. p. 7
Where the paper says it

These fields naturally have a mass above 2mt as the top quark has a large Yukawa coupling with the Higgs boson [73]. Indeed, measuring Higgs boson production in association with a tt pair is crucial for understanding the top-quark couplings to the Higgs boson at the LHeC and FCC-eh COM energies compared to beyond-the-StandardModel(BSM) theories [74, 75].

The LHeC and FCC-eh should certainly consider the longitudinal structure function for top production at Q2&4m2t as an important item on the list of physics topics. p. 7
Where the paper says it

(12) within the range of 105 < Q2 < 107 GeV2 . This demonstrates the importance of the longitudinal structure function of top-pair production in the LHeC and FCC-eh colliders at high inelasticity.

p. 7
Where the paper says it

(12) within the range of 105 < Q2 < 107 GeV2 . This demonstrates the importance of the longitudinal structure function of top-pair production in the LHeC and FCC-eh colliders at high inelasticity.

Results and Conclusion

The ratio FL2 shows a moderate slope at Q2 < 105 GeV2 in the scale µ2 = Q2 + 4m2t. The behavior of the top reduced cross-section at the scale µ2 = Q2 + 4m2t at both COM energies is modified by applying the modification of the Bjorken scaling behavior. p. 8

Where the paper says it

between the results are large ,as shown in Fig. The behavior of the top reduced cross-section at the scale µ 2 = Q2 + 4m2 t at both COM energies is modified by applying the modification of the Bjorken scaling behavior.

The approximation σt r(µ2/s, m2t)≃F t2(µ2/s, m2t) is dominant for Q2 < 4m2t and the saturation of the dipole cross-section is valid in this domain. p. 2
Where the paper says it

The parametrization of gluon distribution and dipole cross-section at the limit xmin = Q2/s is included. The probability of the production of the Higgs boson from the pair top production in the γ ∗ g domain of the ep new colliders is defined.

The top reduced cross-sections at xmin for the LHeC and FCC-eh COM energies are calculated and the effects of the modification of the Bjorken scaling are applied at µ2 = Q2 + 4m2t. p. 0
Where the paper says it

The reduced cross-section for top production at this limit is determined, establishing a bound value for tt production at the LHeC and FCC-eh center-of-mass energies based on renormalization scales. The modification of the Bjorken scaling is applied to this bound of the reduced top cross-section at the renormalization scale µ 2 = Q 2 + 4m2 t , which improves the scaling quantity at Q 2<4m2 t .

The LHeC and FCC-eh should certainly consider the longitudinal structure function for top production at Q2&4m2t as an important item on the list of physics topics.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved prediction of top quark pair production rates in ep colliders by incorporating modification of Bjorken scaling behavior at renormalization scale Q2 + 4m2t. This allows for a more accurate estimation of the reduced cross section when Q2 is greater than 4m2t.

  2. Enhanced sensitivity to the gluon distribution function at small x by using the unintegrated gluon distribution (UGD) in kt factorization formalism. This enables better modeling of the top structure functions in regions relevant for LHeC and FCC-eh kinematics.

  3. More precise determination of the strong coupling constant alpha s(mz) by reweighting it with a factor of Ntot dat/Ntt dat, leading to an estimated value of 0.1201 +/- 0.0012, as reported in Ref.[76].

  4. Improved understanding of top saturation effects by examining the dipole cross section across a wide range of dipole sizes r and comparing it with the bound behavior derived from the collinear approach. This helps determine if limited behavior in observing top saturation will occur at future electron-proton colliders.

  5. Better assessment of Higgs boson production in gamma star g interactions by comparing its probability to the gg process at order O(alphaem/alpha s). This provides a more robust prediction for ttH production cross sections at LHeC and FCC-eh energies.

Abstract

The ratio of the structure functions for deep inelastic scattering in top pair production at future electron-proton colliders is analyzed at a fixed sqrt s and Q squared relative to the minimum value of x given by Q 2/s using collinear factorization. This compact formula for the ratio F L2(Q 2/s,Q squared,m t) is useful for extracting a bound on the top structure function. The reduced cross-section for top production at this limit is determined, establishing a bound value for t production at the LHeC and FCC-eh center-of-mass energies based on renormalization scales. The modification of the Bjorken scaling is applied to this bound of the reduced top cross-section at the renormalization scale μ 2=Q 2+4m t squared, which improves the scaling quantity at Q 2 < 4m t squared. The dipole cross-section for top pair production is examined across a wide range of dipole sizes, denoted as r. It is expected that there will be limited behavior in observing top saturation in future electron-proton colliders according to the bound behavior. The probability of the Higgs boson in γ*g interactions is compared to the gg process at the order of O(α em/α s).

Sources

Related papers