A limit on top quark pair production at future electron-proton colliders
summary
The gist
The paper analyzes the limit on top quark pair production at future electron-proton colliders by studying structure functions and cross-sections using collinear factorization to establish bounds on…
In short
The paper analyzes limits on top quark pair production at future electron-proton colliders by studying structure functions using collinear factorization. By examining a specific ratio of structure functions, it establishes bounds on top structure functions and determines reduced cross-section limits for tt production at LHeC and FCC-eh energies.
Key concepts
- Collinear Factorization
- This theoretical framework is used to relate the measured cross-sections of top pair production in electron-proton collisions to the internal structure of the proton. It allows physicists to separate the hard scattering process from the long-distance interactions, enabling calculations based on known parton distributions.
- Structure Functions (F_t k)
- These functions describe how partons (like gluons) inside a proton are distributed and interact when probed at different energy scales. The paper uses them to derive bounds on the properties of the top quark structure function, which is crucial for predicting production rates.
- Saturation Scale (Q2s)
- The saturation scale marks a critical point in the gluon system where non-linear effects become important, transitioning from a dilute to a saturated regime. It is defined by a specific relation involving Q2 and x, indicating when the simple linear description of gluons breaks down.
- Longitudinal Structure Function
- This function describes the distribution of partons with longitudinal momentum fractions. The paper suggests that studying this specific component at high Q2 and low x is a vital area for future experiments like LHeC and FCC-eh.
Terminology used across episodes
This episode discusses
- A limit on top quark pair production at future electron-proton colliders · Paper Radio
- Future Deep Inelastic Scattering with the LHeC
- Novel QCD Phenomenology at the LHeC
- Overview of top quark physics at the ep colliders
- Top pair production at ultra-high energies
- Measurements of top-quark pair and single top total cross sections, and in-situ systematic constraints
- Higgs bosons in ttbar production
- Higgs boson production in association with a top-antitop quark pair in next-to-next-to leading order QCD
- Precise predictions for t t H production at the LHC: inclusive cross section and differential distributions
- Higher-order QCD and electroweak corrections for t t H production
- Effects of gluon kinematics and the Sudakov form factor on the dipole amplitude
- Transverse momentum dependent gluon density in a proton at low x in the Laplace transform method
- Measurement of the top-quark Yukawa coupling from t production in the lepton+jets final state using pp collisions at sqrt s = 13 TeV with the ATLAS detector
- Extractions of the strong coupling from collider data without PDF refitting are biased
The paper
A limit on top quark pair production at future electron-proton colliders · Read on arXiv
Razi University
The ratio of the structure functions for deep inelastic scattering in top pair production at future electron-proton colliders is analyzed at a fixed sqrt s and Q squared relative to the minimum value of x given by Q 2/s using collinear factorization. This compact formula for the ratio F L2(Q 2/s,Q squared,m t) is useful for extracting a bound on the top structure function. The reduced cross-section for top production at this limit is determined, establishing a bound value for t production at the LHeC and FCC-eh center-of-mass energies based on renormalization scales. The modification of the Bjorken scaling is applied to this bound of the reduced top cross-section at the renormalization scale μ 2=Q 2+4m t squared, which improves the scaling quantity at Q 2 < 4m t squared. The dipole cross-section for top pair production is examined across a wide range of dipole sizes, denoted as r. It is expected that there will be limited behavior in observing top saturation in future electron-proton colliders according to the bound behavior. The probability of the Higgs boson in γ*g interactions is compared to the gg process at the order of O(α em/α s).
DOI: 10.1016/j.aop.2026.170807
Transcript
Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.
Kai: We're looking at the paper: "A limit on top quark pair production at future electron-proton colliders".
Mira: Here's the gist of the paper. The paper analyzes the limit on top quark pair production at future electron-proton colliders by studying structure functions and cross-sections using collinear factorization to establish bounds on top structure functions.
Kai: The ratio of the structure functions for deep inelastic scattering in top pair production at future electron-proton colliders is analyzed at a fixed √s and Q2 relative to the minimum value of x given by Q2/s using collinear factorization.
Mira: This compact formula for the ratio FL2(Q2/s, Q2, mt) is useful for extracting a bound on the top structure function.
Kai: The reduced cross-section for top production at this limit is determined, establishing a bound value for tt production at the LHeC and FCC-eh center-of-mass energies based on renormalization scales.
Paper summary: Kai: So, this paper looks at setting a limit on how much top quark pair production we can expect at future electron proton colliders. It does this by looking closely at the structure functions and cross-sections using collinear factorization to put bounds on those top structure functions.
Mira: Exactly. The core idea is they analyze the ratio of these structure functions for deep inelastic scattering in top pair production, specifically at a fixed center of mass energy and momentum transfer squared relative to the minimum value of x, which is Q squared over s using collinear factorization.
Lev: That compact formula for the ratio FL2(Q squared over s, Q2, mt) is what they use to extract a bound on the top structure function. That seems like a very useful tool for constraining what we can expect experimentally.
Kai: And once they have that bound, they determine the reduced cross-section for top production at this limit. This establishes a bound value for top quark pair production at both the LHeC and FCC-eh center of mass energies, based on those renormalization scales.
Mira: They also apply a modification of Bjorken scaling to this bound of the reduced top cross-section at the scale equal to Q squared plus four times mt squared, which improves how that scaling quantity behaves when Q squared is less than four times mt squared.
Lev: That modification is important because it helps improve the scaling quantity in that lower momentum transfer region, which is where things get tricky for the calculations.
Kai: They examine the behavior of this reduced cross-section at x minimum for both LHeC and FCC-eh center of mass energies, applying that Bjorken scaling modification at that scale equal to Q squared plus four times mt squared.
Mira: The paper notes a moderate slope in the ratio FL2 when Q squared is less than one hundred five gigaparsecs squared relative to the scale equal to Q squared plus four times mt squared.
Lev: And they find that the approximation sigma t r over mu two equals s m two t is dominant for momentum transfer squared less than four times mt squared, and that's where they validate the saturation of the dipole cross-section.
Kai: So, when you look at what this means for us, these results suggest there will be limited behavior in observing top saturation in future electron proton colliders based on the bound behavior they found.
Mira: They also explore how the integrated gluon distribution function is obtained from the unintegrated gluon distribution in the proton and nucleus using a correspondence between that color dipole picture and the kt factorisation formalism.
Lev: That unintegrated gluon distribution is what you get when you use those formalisms, but for real hardware, we have to worry about how much overhead that calculation adds to running it.
Kai: The saturation scale is defined as Q over s times x zero minus lambda, and that scale marks the transition between a dilute gluon system and a saturated one, which is valid at moderate momentum transfer squared values.
Paper summary: Mira: And they also discuss how the top quark structure functions are driven at small x by gluons in the collinear generalized double asymptotic scaling approach, which involves a convolution integral represented by an 'alpha' times 'x g' term.
Lev: That convolution integral is what you get when you take that product of the gluon distribution and the coefficient function, but for real hardware, we have to make sure we can calculate that integral accurately.
Kai: The results at the leading order approximation give a bound limit for both LHeC and FCC center of mass energies, which leads to a bound on top structure functions as FL F2 over s over mt is less than zero point two five nine minus zero point two eight eight.
Mira: That specific numerical bound on the top structure function is what they get from the leading order approximation for the LHeC and FCC center of mass energies.
Lev: For us, that number tells us how tight our constraints are on these fundamental QCD parameters when we try to run these experiments on real hardware.
Kai: They also look at experimental predictions, saying that the total cross-section for top anti top quark pairs at photoproduction is expected to be zero point zero five picobarn at the LHeC.
Mira: And they connect this to observations of top anti top quark pairs production in proton proton collisions, specifically looking at Higgs boson mass of one hundred twenty-five point zero nine giga electron volt for a Higgs boson.
Lev: Measuring Higgs boson production in association with a top anti top pair is crucial for understanding the coupling between the top quark and the Higgs boson at those LHeC and FCC-eh center of mass energies compared to beyond the standard model theories.
Kai: They also suggest that future electron proton colliders should certainly consider the longitudinal structure function for top production at momentum transfer squared equal to Q squared plus four times mt squared as an important topic for physics.
Mira: So, to summarize, this paper provides a bound on top quark pair production by analyzing the ratio of structure functions and determining a reduced cross-section limit for future colliders like the LHeC and FCC-eh.
Lev: And it gives us concrete constraints on those structure functions based on the leading order approximation, which we then refine with Bjorken scaling modifications.
Kai: The implication is that we have a way to set limits on top quark production at very high energies using these electron proton colliders, even before they are fully operational.
Mira: It's about testing quantum chromodynamics through the study of Higgs boson production in top pair processes, which is a process that is already crucial at the LHC.
Lev: From an engineering standpoint, it shows us where the precision needs to be pushed when trying to implement these calculations on real machines.
Kai: This work sets a clear boundary for what we can expect from these future colliders concerning top quark pair production rates.
Conclusion: Kai: So, we've been looking at how these structure functions constrain top quark production at future electron proton colliders. Now we get to the end of this paper, so let's talk about what it really means for the title and who wrote it.
Mira: It’s a paper titled "A limit on top quark pair production at future electron-proton colliders." Basically, they took all that math—all those structure functions and cross-sections—and they put a hard ceiling on how much top quark pairs we can expect to see when we run these machines like the LHeC or the FCC-eh.
Lev: So what’s the actual implication? It shows us exactly what our experimental limits should be, based on current theoretical understanding. It's not just a prediction; it's a constraint on the physics itself.
Kai: Right, so it means that before we even build these colliders, we have a bound on top quark production rates. We’re looking at how those structure functions behave when you push the energy up to very high values of s and Q squared.
Mira: The authors use this ratio of structure functions to get that limit. It's a compact formula they developed, and it’s really smart because it helps us see the top structure function in a way that’s easier to handle theoretically.
Lev: From my side, what they do is give us concrete numbers based on those renormalization scales. Those are the scales where we actually have to worry about running the experiment on real hardware, so those bounds are very useful for planning precision.
Kai: So it boils down to this: we know the theoretical limits based on QCD and factorization methods, and now we have a numerical bound for top quark pairs at those future energies. It tells us what kind of signal we should be looking for.
Mira: And they also hint at something else—that the longitudinal structure function is a major piece of physics to consider when we talk about top production at those high momentum transfer squared values, specifically when Q squared is equal to four times mt squared.
Lev: That sounds like a crucial point for our error-correction work because it points us toward where we might need more precise measurements or different theoretical tools. We’ll see how that longitudinal structure function plays out in the next piece of research.
More episodes
- 2610.38463-Gauge-parameter cancellation and finite form factors in one-loop quark scattering in the refined Gribov-Zwanziger framework
- 2610.37198-Searches for new particle physics by methods of classical and neutrino astronomy
- 2511.15779-SURFing to the Fundamental Limit of Jet Tagging
- 2505.01492-Photo- and Hadrodisintegration constraints on massive relics decaying into neutrinos
- 2505.20389-Dispersion relation of the neutrino plasma: Unifying fast, slow, and collisional instabilities
- 2511.10731-Keeping It Renormalizable: Minimal Baryogenesis induced Asymmetric Dark Matter
- 2404.04021-Vacuum correlations of the stress-energy-momentum tensor with constituent quarks
- 2503.02931-Relativistic Navier-Stokes description of the quark-gluon plasma radial flow
- 2606.06105-Bulk viscosity of a binary mixture: the role of the intra-species interaction
- 2607.03343-First look at the evaluation of two-loop Feynman integrals for radiative return processes