Spherical Balls Settling Through a Quiescent Cement Paste Measured by X-ray Tomography: Influence of the Paste Thixotropy
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: We're looking at the paper: "Spherical Balls Settling Through a Quiescent Cement Paste Measured by X-ray Tomography".
Mira: Here's the gist of the paper. The settling of spherical balls in quiescent cement pastes of increasing age is studied using X-ray tomography to investigate how paste thixotropy influences ball movement and stoppage.
Kai: The average velocity of the balls decreases logarithmically with paste age until ball stoppage occurs for all three ball sizes.
Mira: In parallel, the rheological properties of the cement paste are measured using a rheometer to evaluate the evolution of the paste static yield stress over time, which proves to be a reliable predictor for ball stoppage.
Kai: Finally, thixotropic models of increasing complexity are evaluated to capture the ball settling velocity as a function of paste age, emphasizing the importance of considering paste breakdown in relation to shearing when the ball passes through it.
Title and authors: Kai: We're diving into the title and authors of this paper now, "Spherical Balls Settling Through a Quiescent Cement Paste Measured by X-ray Tomography: Influence of the Paste Thixotropy."
Mira: The core idea is connecting how structure builds up in cement—the thixotropy—to the actual physical movement of particles inside it.
Lev: The authors are from TU Wien and TU Graz, which suggests a solid focus on material science and structural physics, which is exactly where this kind of complex fluid behavior lives.
Kai: So what does this mean for us? It means we’re not just looking at static properties; we’re seeing how the internal breakdown of that paste changes the dynamics when things are moving through it.
Mira: Exactly. It moves beyond just saying "it gets thicker over time" to showing how that thickening directly dictates when a particle stops falling and why.
Lev: For real hardware, this is interesting because it gives us a physical reason for yield stress evolution in these systems, which is something we wrestle with constantly when designing flow control mechanisms.
Kai: So the paper sets up this connection between aging, structure, and settling velocity as the central focus of their investigation.
The paper's summary: Mira: The summary explains that they measure the paste's rheological properties using small amplitude oscillatory shear to track how its elastic modulus and static yield stress change with paste age.
Lev: And they found that this evolution of the static yield stress is a reliable predictor for when we expect those balls to stop moving, which is a key insight for predictive modeling.
Kai: They also looked at thixotropic models of increasing complexity to see how well they can actually capture this settling velocity as the paste ages.
Mira: And here’s the specific finding: models II and IV fit the experimental data better than the others, which strongly suggests that considering paste destructuration—the breakdown—is crucial for an accurate description of what's happening when a ball passes through it.
Lev: That makes sense from a simulation standpoint; if you ignore that breakdown, you’re just modeling the wrong fluid behavior entirely.
Kai: So the paper shows that even with increasing complexity in their models, they still need to explicitly account for how the paste breaks down when a ball shears through it.
The paper's improvements: Mira: The authors suggest several improvements to their existing framework, and one key improvement is developing a predictive model for ball stopping using static yield stress instead of relying only on dynamic yield stress.
Lev: That's significant because the paper itself implies that the dynamic yield stress doesn't seem quantitatively related to ball stopping because the falling ball shears the paste from an at rest state to a fluidized state, which is what we need to model for real applications.
Kai: Right, so they want us to use what we measure directly—the static yield stress measured by small amplitude oscillatory shear—as our primary predictor for when the balls will stop.
Mira: And they also push for better velocity prediction by incorporating the structural growth and breakdown parameters into a system that accounts for four different cases for the structure parameter lambda.
Lev: That means they’re moving towards a more comprehensive model that explicitly handles both how much structure is forming and how fast it breaks down as the ball moves through.
Kai: So, instead of just fitting an equation to the velocity curve, they want us to build a system that understands the underlying physical mechanism of structural change during the settling process.
Conclusion: Mira: To wrap up, this paper on "Spherical Balls Settling Through a Quiescent Cement Paste Measured by X-ray Tomography: Influence of the Paste Thixotropy" shows that aging causes a logarithmic decrease in settling velocity until stoppage across all ball sizes.
Kai: And the main thing is that while models II and IV fit the data best, the critical factor for prediction seems to be using static yield stress measured by small amplitude oscillatory shear instead of dynamic yield stress.
Lev: From an engineering standpoint, this confirms that modeling paste destructuration when a ball shears through it is absolutely crucial for capturing cement paste behavior accurately.
Mira: So we are seeing that the structural growth and breakdown parameters together give us the best picture of this settling behavior in cement pastes.
Kai: It’s a solid demonstration of how to use rheology and imaging together to understand complex materials under rest.
Lev: For us, it’s a reminder that when you're building something that relies on internal structure, like a concrete mix or a fluid system, you have to model the destruction of that structure during motion if you want accurate results.
Subhransu Dhar, Eduardo Machado-Charry, Robert Schennach, Teresa Liberto, Agathe Robisson
Institute of Material Technology, Building Physics, and Building Ecology at TU Wien · Institute of Solid State Physics at TU Graz
cond-mat.soft, cond-mat.mtrl-sci
Submitted: 2026-01-22
Updated: 2026-11-09
Journal ref: Journal of Non-Newtonian Fluid Mechanics 351, 105678 (2026)
DOI: 10.1016/j.jnnfm.2026.105678
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 77/100
The gist: The settling of spherical balls in quiescent cement pastes of increasing age is studied using X-ray tomography to investigate how paste thixotropy influences ball movement and stoppage.
Key concepts
- Thixotropy
- This describes a material's ability to change its viscosity when subjected to shear stress. In cement paste, aging causes it to become more structured (stiffer) over time. When a ball passes through, this structure breaks down, affecting how fast the ball moves.
- Static Yield Stress
- This is the minimum force required to start flowing or deforming a material at rest. The study found that measuring this static yield stress during the experiment provides a more accurate prediction for when a ball will stop moving compared to measuring dynamic yield stress.
- Paste Destructuration
- This refers to the breakdown of the cement paste structure caused by external forces, like a falling ball. Modeling this breakdown is crucial because it dictates the transition from a structured state to a fluidized state, which governs the ball's final stopping behavior.
Terminology
Summary
The settling of spherical balls in quiescent cement pastes of increasing age is studied using X-ray tomography to investigate how paste thixotropy influences ball movement and stoppage. p. 2
The average velocity of the balls decreases logarithmically with paste age until ball stoppage occurs for all three ball sizes. p. 0 In parallel, the rheological properties of the cement paste are measured using a rheometer to evaluate the evolution of the paste static yield stress over time, which proves to be a reliable predictor for ball stoppage. p. 0 Finally, thixotropic models of increasing complexity are evaluated to capture the ball settling velocity as a function of paste age, emphasizing the importance of considering paste breakdown in relation to shearing when the ball passes through it. p. 0
Experimental Setup and Methodology
The study utilized metallic spheres with radii of 2, 2.5 and 3 mm dropped into cement pastes to track their position using X-ray tomography. p. 0 The experiment focused on the influence of cement paste age at rest. p. 2 Rheological characterization involved small amplitude oscillatory shear to quantify the evolution of the paste elastic modulus and static yield stress with paste age. p. 2
Rheological Characterization Findings
The viscosity of the cement paste is shown to plateau between 400 and 800 s−1 to reach a viscosity of 1 ± 0.1 Pa.s at early ages, confirming that fluidized behavior is independent of age when high shear is conducted. p. 4 The Herschel-Bulkley model fit identified the paste dynamic yield stress to be 33 Pa. p. 5 Furthermore, the growth of storage modulus G′ with time is captured by a simple equation where the complex viscosity follows η∗ = η∗o + K · t m. p. 5
Modeling and Theoretical Framework
The terminal velocity of a sphere falling through a thixotropic fluid is given by equation (6), which incorporates the structure parameter λ as λ(λ) = λg + λb. Four cases for the expression of the structure parameter λ are proposed, leading to four expressions for settling ball velocity v. p. 0
Velocity Prediction and Stoppage Criteria
The results from fitting experimental data to models I through IV showed that models II and IV fit the experimental data better than the others, highlighting the importance of considering paste destructuration. Ball stoppage could be predicted when static yield stress, as measured by small-amplitude oscillatory shear, was considered. p. 2 Theoretical estimates for ball stoppage yielded stresses were calculated and compared with experimentally measured static yield stresses. p. 0
Conclusion on Thixotropy
The study demonstrates that paste aging causes a logarithmic decrease in settling velocity until stoppage, and the breakdown structure parameter is important for accurate modeling. The static yield stress is identified as a better predictor for ball stoppage than the dynamic yield stress because falling balls shear the paste from an at rest state to a fluidized state. p. 0 The work emphasizes that considering paste breakdown is crucial for capturing the behavior of cement pastes. p. 0
Acknowledgments
The work received support from Osterreichische BautechnikVereinigung (¨ OBV) and ¨Osterreichische Forschungsf¨orderungsgesellschaft (FFG) through Project number 870962. The authors thanked C. p. 0 Barentin and R. Biswas for fruitful discussions, and J. Kirnbauer and M. Ramizi for their help during the experimental campaign. p. 2 The authors also acknowledged TU Wien Bibliothek for financial support through its Open Access Funding Program. p. 0
References
[1] M.F. Ashby, Materials and sustainable development (Butterworth-Heinemann, 2022)
[3] J.W. Bullard, H.M. Jennings, R.A. Livingston, A. Nonat, G.W. Scherer, J.S. Schweitzer, K.L Scrivener, JJ Thomas, Mechanisms of cement hydration (Cement and concrete research 41(12), 1208–1223 (2011))
[7] N. Roussel, A thixotropy model for fresh fluid concretes: Theory, validation and applications. p. 1 Cement and concrete research 36(10), 1797–1806 (2006)
[18] A Beris, J Tsamopoulos, R Armstrong, R Brown, Creeping motion of a sphere through a bingham plastic. Journal of Fluid Mechanics 158, 219–244 (1985)
[20] R Biswas, D Saha, R Bandyopadhyay, Quantifying the destructuring of a thixotropic colloidal suspension using falling ball viscometry. Physics of Fluids 33(1) (2021)
[47] N Roussel, A thixotropy model for fresh fluid concretes: Theory, validation and applications. Cement and concrete research 36(10), 1797–1806 (2006)
[25] S van den Wildenberg, X Jia, J L´eopoldes, A Tourin, Ultrasonic tracking of a sinking ball in a vibrated dense granular suspension. Scientific Reports 9(1), 5460 (2019)
[31] B Strybny, J Link, M Coenen, V Vidal, M Zuber, T Schack, M Haist, Mechanisms of air bubble rise in cement suspensions studied by x-ray analysis. Construction and Building Materials 457, 139330 (2024)
[48] YM Joshi, Perspective: Analysis of thixotropic timescalea. Journal of Rheology 68(4), 641–653 (2024)
Supplementary Information
Fig S1 shows the schematic of the experimental setup used in this work. Fig S2 shows the three dimensional fits of the steady state velocity for Cases I - IV. p. 7 p. 7 Fig S3 shows cement paste shear stress τ as a function of shear rate γ˙, with Herschel Bulkley (cyan) and Bingham (orange) fits to identify dynamic shear stress τo. p. 4 p. 4 Fig S4 shows instantaneous ball velocity vi as a function of position for paste age of t = 420 s, using a 2. p. 8 p. 75 mm ball.
Table Data
Table 1 identifies parameter values for Cases I to IV, showing R-square values. Table 2 shows theoretically estimated yield stress of cement paste for ball stoppage and experimentally measured static yield stress at time of stoppage. p. 0
Results Summary
The models of cases II and IV fit the experimental data better than the other models, showing the importance of considering cement paste destructuration that occurs at the passage of the ball. The characteristic times T identified using linear structuration growth model seem aligned with studies on cement (e. p. 5g., [47]). Ball stoppage could be predicted when the static yield stress, as measured by small-amplitude oscillatory shear, was considered. p. 2 The dynamic yield stress does not seem to be quantitatively related to ball stoppage because the falling ball shears the paste from an at rest state to a fluidized state. p. 4
Conclusion
The results show that paste aging causes a logarithmic decrease in settling velocity until stoppage, and this behavior has been observed in other thixotropic materials. A model incorporating both structural growth and breakdown parameters was developed to capture this behavior adequately. p. 0 The importance of taking paste destructuration into account is demonstrated by the better fit obtained by models II and IV. p. 0 Ball stoppage can be predicted using the static yield stress measured via small-amplitude oscillatory shear. p. 2 The study confirms that considering paste breakdown is crucial for accurately modeling cement pastes. p. 0
[1] M.F. Ashby, Materials and sustainable development (Butterworth-Heinemann, 2022)
[2] European Committee for Standardization (CEN). Cement – Part 1: Composition, specifications and conformity criteria for common cements (2023). Defines 27 common cement types and constituents
[6] P.F.G. Banfill, Rheology of Fresh Cement and Concrete: Proceedings of an International Conference, Liverpool, 1990 (CRC Press, 1990)
[7] N Roussel, A thixotropy model for fresh fluid concretes: Theory, validation and applications. Cement and concrete research 36(10), 1797–1806 (2006)
[8] P Coussot, Yield stress fluid flows: A review of experimental data. Journal of Non-Newtonian Fluid Mechanics 211, 31–49 (2014)
[9] D Liu, Z Zhang, X Zhang, Z Chen, 3d printing concrete structures: State of the art, challenges, and opportunities. Construction and Building Materials 405, 133364 (2023)
[11] H.A Barnes, Thixotropy—a review. p. 0 p. 0 Journal of Non-Newtonian fluid mechanics 70(1-2), 1–33 (1997)
[42] P A Durbin, G Medic, Creeping Flow (Cambridge University Press, 2007), p. 108–131
[43] P Coussot, QD Nguyen, H Huynh, D Bonn, Avalanche behavior in yield stress fluids. Physical review letters 88(17), 175501 (2002)
[47] N Roussel, A thixotropy model for fresh fluid concretes: Theory, validation and applications. Cement and concrete research 36(10), 1797–1806 (2006)
[48] YM Joshi, Perspective: Analysis of thixotropic timescalea. Journal of Rheology 68(4), 641–653 (2024)
S1 shows the schematic of the experimental setup used in this work. S2 shows the three dimensional fits of the steady state velocity for Cases I - IV. S3 shows cement paste shear stress τ as a function of shear rate γ˙, with Herschel Bulkley (cyan) and Bingham (orange) fits to identify dynamic shear stress τo. S4 shows instantaneous ball velocity vi as a function of position for paste age of t = 420 s, using a 2.5 mm ball.
[1] M.F. Ashby, Materials and sustainable development (Butterworth-Heinemann, 2022)
[3] J.W Bullard, H.M Jennings, R.A Livingston, A Nonat, G W Scherer, J S Schweitzer K L Scrivener J J Thomas Mechanisms of cement hydration (Cement and concrete research 41(12), 1208–1223 (2011))
[6] P.F.G Banfill, Rheology of Fresh Cement and Concrete: Proceedings of an International Conference, Liverpool, 1990 (CRC Press, 1990)
[7] N Roussel, A thixotropy model for fresh fluid concretes: Theory, validation and applications. Cement and concrete research 36(10), 1797–1806 (2006)
[8] P Coussot, Yield stress fluid flows: A review of experimental data. Journal of Non-Newtonian Fluid Mechanics 211, 31–49 (2014)
[9] D Liu, Z Zhang, X Zhang, Z Chen, 3d printing concrete structures: State of the art, challenges, and opportunities. Construction and Building Materials 405, 133364 (2023)
[11] H.A Barnes, Thixotropy—a review. Journal of Non-Newtonian fluid mechanics 70(1-2), 1–33 (1997)
[42] P A Durbin, G Medic, Creeping Flow (Cambridge University Press, 2007), p. 108–131
[43] P Coussot, QD Nguyen, H Huynh, D Bonn, Avalanche behavior in yield stress fluids. Physical review letters 88(17), 175501 (2002)
[47] N Roussel, A thixotropy model for fresh fluid concretes: Theory, validation and applications. Cement and concrete research 36(10), 1797–1806 (2006)
[48] YM Joshi, Perspective: Analysis of thixotropic timescalea.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Develop a predictive model for ball stopping using static yield stress instead of dynamic yield stress, as
the cement paste static yield stress is a better predictor of ball stoppage than the dynamic yield stress.
This allows for more reliable prediction based on rheological measurements like small amplitude oscillatory shear. -
Implement a velocity prediction system that accounts for structural growth and breakdown parameters, specifically evaluating
four cases for the expression of the structure parameter lambda,
which includes consideringpaste destructuration (or fluidization) that occurs at the passage of the ball.
-
Enhance material property estimation by using measured complex viscosity evolution to define a growth parameter, such as
Expression 2 for the structure growth parameter lambda g2 is assumed to change as the complex viscosity eta measured under oscillatory shear.
Related papers
- Coarse-graining dense, deformable active particles
- Three-body corrections to the Brownian viscosity of hard spheres without hydrodynamic interactions
- Thin active nematohydrodynamic layers: asymptotic theories and instabilities
- Origins of suppressed self-diffusion of nanoscale constituents of a complex liquid
- Soft material mechanical property degradation at high strain rates
- Avalanche criticality emerges by thermal fluctuation in a quiescent glass