Impact of hydrogen incorporation on electronic and magnetic structure of X2CrNi18-9 stainless steel
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: We're looking at the paper: "Impact of hydrogen incorporation on electronic and magnetic structure of X2CrNi18-9 stainless steel".
Mira: Here's the gist of the paper. Hydrogen absorption significantly alters the electronic and magneto-structural properties of X2CrNi18-9 stainless steel in different microstructural states The study investigates the influence of hydrogen incorporation on the electronic and magneto-structural properties of X2CrNi18-9 stainless steel in different microstructural states.
Kai: Microstructural State Characterization The researchers selected a metastable austenitic steel within the compositional range of DIN EN X2CrNi18-9 (AISI 304L) to investigate the role of chemical homogeneity on the effects of hydrogen absorption.
Mira: They created a matrix of three prepared material states: 1.
Kai: conventional processing by casting and forging followed by a final solution annealing step (CON-SA).
Title and authors: Kai: So we're looking at this paper now, "Impact of hydrogen incorporation on electronic and magnetic structure of X2CrNi18-nine stainless steel <ref:2601.21672#pg1,Impact of hydrogen incorporation on electronic and magnetic structure of X2CrNi18-9>." It looks like they're taking this specific type of steel, the X2CrNi18-nine and seeing how soaking it in hydrogen actually messes with its internal electronic and magnetic layout <ref:2601.21672#pg1>.
Mira: Right. The title itself suggests a deep dive into how that hydrogen affects two different things: the electronics and the magnetism. It's interesting because these properties are so sensitive to tiny structural changes inside the material, which is what you get when you introduce something like hydrogen atoms.
Lev: From an error correction standpoint, this kind of study is useful because it shows us how defects can act as trapping sites for hydrogen, which directly relates to how much diffusible hydrogen we actually have in the steel at a given time twenty <ref:2601.21672#pg2,act as trapping sites for hydrogen>.
Kai: So what they did was look at three different ways of making this steel: conventional casting and forging followed by solution annealing, laser powder bed fusion with solution annealing, and laser powder bed fusion in the as-built condition without any extra heat treatment. They wanted to see how the starting structure of the material influences everything.
Mira: And they were focused on chemical homogeneity because they found that this was a big deal for how hydrogen behaves in these steel structures sixteen <ref:2601.21672#pg2>. They used phase stability maps to check if the chemistry was consistent across all those different processing routes.
Lev: That makes sense, because if the chemistry is patchy, you get localized areas where things can segregate and trap hydrogen differently than in a uniform structure. I wonder how that translates when we think about running this on actual hardware, since local variations complicate error correction schemes nineteen <ref:2601.21672#pg2>.
Kai: They found that the conventional processing condition had much larger chemical variations compared to the laser powder bed fusion routes. Specifically, they saw a standard deviation of one hundred forty-one Joules per mole for the conventional state, which was quite high <ref:2601.21672#pg1>.
Title and authors: Mira: Whereas for those laser powder bed fusion conditions, PBF solution annealed and PBF as-built, the distributions were much tighter with a standard deviation of eighty-seven Joules per mole. That suggests that the additive manufacturing process might naturally lead to more chemically uniform steel structures sixteen <ref:2601.21672#pg2>.
Lev: Tighter distributions mean less uncertainty in the material's properties, which is good for any system you try to model or build, but I still have to ask if this homogeneity holds up when we introduce hydrogen <ref:2601.21672#pg3>.
Kai: Moving onto the electronic side of things, they looked at Seebeck coefficients. These coefficients are sensitive indicators of the electronic density of states right at the Fermi edge, which is where you measure these kinds of properties one <ref:2601.21672#pg1>. They found that all samples had negative Seebeck coefficients, but there were clear differences between them based on how they were processed.
Mira: The paper points out that hydrogen-treated samples showed smaller absolute values for the Seebeck coefficient compared to the argon-treated reference samples. This suggests a measurable electronic mechanism is at work when hydrogen gets incorporated one <ref:2601.21672#pg1>.
Lev: Smaller absolute values, right? If we're trying to use this as a sensing principle later, like Kai mentioned, that reduction in value could be a very sensitive signal for hydrogen presence in the material <ref:2601.21672#pg3>.
Kai: Then there's the magnetic structure. They used neutron scattering and magnetic small-angle neutron scattering to probe this. The results showed an extra signature of nanoscale inhomogeneities in the laser powder bed fusion as-built sample, whether it had hydrogen or not one <ref:2601.21672#pg1>.
Mira: They calculated a Guinier radius for these inhomogeneities in that PBF as-built condition to be seventeen point nine nanometers without hydrogen and then that radius grew to twenty point three nanometers when hydrogen was added <ref:2601.21672#pg3>.
Lev: Growing the Guinier radius by over two nanometers just because of the hydrogen incorporation is significant. That strongly implies that the hydrogen isn't just sitting randomly; it seems to be accumulating right near these specific nanoscale structural features, like grain boundaries <ref:2601.21672#pg3>.
Title and authors: Kai: So they conclude that hydrogen incorporation causes measurable changes in the electronic structure, specifically that reduction in those Seebeck coefficients we talked about earlier. They also found evidence of short-range order nanoscale inhomogeneities and that the hydrogen prefers to accumulate near those boundaries one <ref:2601.21672#pg1>.
Mira: The main implication here is that these nanoscale cell boundaries are crucial for how hydrogen gets incorporated into this austenitic steel one <ref:2601.21672#pg1>. It links the chemical structure, which we saw was more consistent in some PBF routes, to the physical trapping of hydrogen.
Lev: If we can control those cell boundaries through processing parameters—like tuning the laser powder bed fusion parameters—that could be a way to rationally optimize how much hydrogen gets incorporated and where it goes one <ref:2601.21672#pg1>. That’s a tangible engineering goal.
Kai: So, to wrap up this paper on "Impact of hydrogen incorporation on electronic and magnetic structure of X2CrNi18-nine stainless steel," the main thing is that we can see how the way we make the steel matters for its fundamental properties when it absorbs hydrogen <ref:2601.21672#pg1,Impact of hydrogen incorporation on electronic and magnetic structure of X2CrNi18-9>.
Mira: It shows that chemical homogeneity in additive manufacturing helps control those structural inhomogeneities, and those inhomogeneities are where the hydrogen likes to settle, which then changes both the electronic response and the magnetic signature of the material one <ref:2601.21672#pg1>.
Lev: For us in error correction, this gives us a way to predict where defects will localize hydrogen, which is something we need for building more robust hardware <ref:2601.21672#pg3>.
Kai: It opens up a path where those measured Seebeck coefficients could become a sensitive non-destructive probe for checking if hydrogen has been incorporated into these steels one <ref:2601.21672#pg1>.
Mira: Indeed, this work connects the big picture of phase stability and chemical structure to the actual physical trapping of hydrogen in a way that is highly controllable through processing choices.
Lev: So we've seen how structural features dictate material behavior under stress, which is exactly what we need when designing materials that need to operate reliably <ref:2601.21672#pg3>.
The paper's summary: Kai: So, we're talking about how putting hydrogen into this specific stainless steel changes its electronic stuff and its magnetic behavior across different structures.
Mira: Right, essentially they looked at three different ways to make the steel—casting and forging, laser powder bed fusion with annealing, and just the as-built PBF version.
Kai: They used these structural differences to test how much hydrogen actually affects the material's electrical response and magnetic signature.
Mira: The key finding is that even though all samples started with the same basic recipe, how you built it matters a lot for where that hydrogen ends up and what kind of changes you see in the electronic density of states.
Kai: They found that when hydrogen is added, the absolute values of those Seebeck coefficients—those electrical sensitivity numbers—get smaller across all samples compared to when they were just treated with argon.
Mira: That suggests there's a real electronic mechanism at play here, something sensitive enough that you can actually measure it using those Seebeck measurements later on.
Kai: And then they looked at the magnetism too, using neutron scattering, and they found nanoscale structural features appearing in the laser powder bed fusion as-built material whether hydrogen was there or not.
Mira: Crucially, when they added the hydrogen to that same as-built sample, those nanoscale features got bigger—the Guinier radius increased—and it looked like the hydrogen was specifically accumulating right around those grain boundaries.
Kai: So what this means is that we aren't just looking at some random defect; we're seeing a specific structural effect where the hydrogen prefers to cluster near these tiny cell boundaries in the steel.
Mira: It links the chemical structure, which they found was more consistent in certain laser powder bed fusion routes, directly to where the hydrogen traps physically.
Kai: This opens up a path for us because if we can tune those laser powder bed fusion parameters—the processing settings—we might be able to control those cell boundaries and therefore control how much hydrogen gets incorporated and where it settles.
Mira: And that control could lead us to use these measured Seebeck coefficients as a kind of sensitive, non-destructive probe for checking if hydrogen is actually in the material.
The paper's improvements: Kai: So the paper isn't just describing what happened, it's actually suggesting ways to make our understanding better for future work on this stuff.
Mira: Right, they found that the researchers think we need to get much better at predicting how hydrogen uptake efficiency works in these austenitic steels.
Kai: They suggest tuning the laser powder bed fusion processing parameters—the settings you use when building it—to rationally optimize how much hydrogen gets incorporated and where it goes in the material.
Mira: That means we can start thinking about how to control the composition and length scales of those nanoscale cell boundaries just by tweaking the manufacturing process itself.
Kai: It's like finding a knob on a machine that lets you dial in exactly how many hydrogen atoms stick where you want them to stick, which is pretty powerful for material science.
Mira: And they also propose using this improved AI system as a really sensitive tool for non-destructive investigation of hydrogen incorporation within materials.
Kai: They think those changes we saw in the measured Seebeck coefficients—those electrical sensitivity numbers—could actually serve as a really sensitive probe to check if hydrogen has been incorporated into the steel without destroying it.
Mira: That connects back to the magnetic data they gathered too; you can use that AI system to differentiate between just chemical inhomogeneity and hydrogen incorporation by analyzing the magnetic scattering data.
Kai: Specifically, they found that this analysis shows hydrogen preferentially accumulates right near those nanoscale segregation structures, and that this accumulation leads to a reduction in spin disorder because of the hydrogen.
Mira: So what this means for us is that we have a roadmap to use these measurements not just to describe what's there now, but to actively control the process and verify the structure in future materials.
Kai: It moves us from just observing how hydrogen interacts with steel to actually designing processes that deliberately engineer those nanoscale features for better hydrogen management.
Conclusion: Kai: So to wrap up, the study on "Impact of hydrogen incorporation on electronic and magnetic structure of X2CrNi18-nine stainless steel" shows that how you build it matters for its fundamental response when it soaks up hydrogen.
Mira: The main point is that these nanoscale features in the laser powder bed fusion as-built material are where the hydrogen preferentially gets trapped, which then changes both its magnetic signature and its electronic response.
Kai: We saw those Seebeck coefficients drop because of this structural effect, and we can potentially use those measurements to non-destructively check for hydrogen in these steels later on.
Mira: It really ties together the chemical stability maps with the actual physical trapping of hydrogen at the grain boundaries, which is a big deal for understanding how defects form in these alloys.
Lev: From an error correction standpoint, knowing that hydrogen localizes near these specific nanoscale structures gives us something concrete to model when we think about running this kind of hardware reliably.
Kai: Exactly. It moves the study from just observation to suggesting how we can engineer those cell boundaries using processing parameters for better hydrogen control.
Mira: It shows that controlling the manufacturing process is a way to gain control over the material's internal structure and its resulting physical properties under hydrogen exposure.
Lev: Yeah, so if we can reliably predict where that trapping happens based on the PBF settings, it lowers the overhead in building actual hardware with these materials.
Torben Tappea, Louis Beckerc, Gaurav Kanud, Thomas F. Headene, Dirk Honeckere, Gabi Schierninga, Santiago Benitoc, Sebastian Weberc, Ülara Lünsera, × Sabrina Dischd
Applied Quantum Materials, Institute for Energy und Materials Processes (EMPI), University of Duisburg-Essen · Research Center Future Energy Materials and Systems (RC FEMS), University Alliance Ruhr · Chair of Materials Technology, Ruhr University Bochum · Faculty of Chemistry, University of Duisburg-Essen · ISIS Neutron and Muon Source, Science and Technology Facilities Council, Rutherford Appleton Laboratory · Center for Nanointegration Duisburg-Essen (CENIDE), University of Duisburg-Essen
cond-mat.mtrl-sci
Submitted: 2026-01-29
Updated: 2026-01-29
Comments: 18 pages, 8 figures
DOI: 10.1002/adem.71333
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 97/100
The gist: Hydrogen absorption significantly alters the electronic and magneto-structural properties of X2CrNi18-9 stainless steel in different microstructural states The study investigates the influence of…
Key concepts
- Microstructural States
- The researchers compared three different ways the steel was made: conventional processing (casting/forging), laser powder bed fusion with solution annealing, and as-built PBF. They analyzed grain size, dislocation density, and chemical mixing to see how these starting structures affect hydrogen absorption.
- Chemical Homogeneity
- This refers to how evenly the elements are distributed throughout the steel. The study used thermodynamic maps (ΔG) to check this; conventional processing showed significant local variations, while PBF conditions appeared chemically uniform at a small scale, suggesting processing affects mixing.
- Seebeck Coefficient
- This is an electronic property measured in the study that is sensitive to changes in the material's electronic density of states. The authors found that hydrogen treatment alters these values, suggesting an underlying electronic mechanism that could be used for sensing purposes.
Terminology
Summary
Hydrogen absorption significantly alters the electronic and magneto-structural properties of X2CrNi18-9 stainless steel in different microstructural states The study investigates the influence of hydrogen incorporation on the electronic and magneto-structural properties of X2CrNi18-9 stainless steel in different microstructural states. p. 0 However, absorbed
hydrogen also influences its electronic and magneto-structural properties, helping to interpret how
hydrogen is incorporated. This study therefore investigates the influence of hydrogen incorporation
on the electronic and magneto-structural properties of X2CrNi18-9 stainless steel in different
microstructural states.Where the paper says it
Microstructural State Characterization
The researchers selected a metastable austenitic steel within the compositional range of DIN EN X2CrNi18-9 (AISI 304L) to investigate the role of chemical homogeneity on the effects of hydrogen absorption. They created a matrix of three prepared material states:
-
conventional processing by casting and forging followed by a final solution annealing step (CON-SA). p. 1
Where the paper says it
For each state, we subjected one sample to a hydrogen atmosphere and one reference sample to a pure argon atmosphere. The three prepared material states were (1) conventional processing by casting and forging followed by a final solution annealing step (CON-SA),
-
laser powder bed fusion also in combination with solution annealing (PBF-SA). p. 2
Where the paper says it
3 (2) laser powder bed fusion also in combination with solution annealing (PBF-SA), (3) laser powder bed fusion in the as-built condition without further thermal treatment (PBF-AB). Table 1: Mean alloy compositions of DIN EN X2CrNi18-9 in three different processing conditions measured by optical emission spectrometry; values given in mass-%.
-
laser powder bed fusion in the as-built condition without further thermal treatment (PBF-AB). p. 2
Where the paper says it
3 (2) laser powder bed fusion also in combination with solution annealing (PBF-SA), (3) laser powder bed fusion in the as-built condition without further thermal treatment (PBF-AB). Table 1: Mean alloy compositions of DIN EN X2CrNi18-9 in three different processing conditions measured by optical emission spectrometry; values given in mass-%.
Microstructural characterization included analytic electron microscopy mapping, X-ray diffraction and thermodynamic stability maps to evaluate grain size, dislocation density and chemical homogeneity. p. 0 This study therefore investigates the influence of hydrogen incorporation
on the electronic and magneto-structural properties of X2CrNi18-9 stainless steel in different
microstructural states. Microstructural characterization included analytic electron microscopy
mapping, X-ray diffraction and thermodynamic stability maps to evaluate grain size, dislocation density
and chemical homogeneity. Compared with the CON-SA (Fig. 1a) state, the PBF-AB condition is distinguished not only by
its columnar grain morphology but also by a markedly smaller mean grain size of 9. In contrast,
CON-SA exhibits substantially larger average grain size of 27. 7 µm and displays the typical
microstructure of conventionally produced austenitic steels, i. In contrast,
CON-SA exhibits substantially larger average grain size of 27. 7 µm and displays the typical
microstructure of conventionally produced austenitic steels, i.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Chemical Homogeneity Assessment
The study used phase stability maps (ΔG maps) computed with Thermo-Calc/Python coupled with the TCFe10 database to evaluate thermodynamic stability. The CON-SA condition exhibited pronounced local variations in ΔG, with a standard deviation of 141 J/mol, compared to narrower distributions for PBF conditions (std: 87 J/mol). p. 3 This heterogeneity is quantitatively
confirmed by the histogram in Fig. 2 a2), which displays a significantly broader distribution (standard
deviation: 141 J/mol) compared to the narrower distributions of the additively manufactured PBF-AB
(std: 87 J/mol) and PBF-SA (std: 88 J/mol) conditions.Where the paper says it
First-order variograms were used to quantify the spatial structure of chemical gradients. p. 4 Despite these compositional shifts, the relative difference
in mean stability is small (< 3%), allowing the materials to be regarded as thermodynamically
comparable for this analysis. To quantify the spatial structure of the chemical gradients, first-order variograms were calculated (Fig. 2 a3), the variogram reveals the spatial
dependency of the segregation. The curve rises to a stable plateau (the sill) of approximately 155 J/mol. This value corresponds to the characteristic width of the band-shaped variations
visible in the ΔG map (Fig. In contrast, no discernible local differences are observed for the powder-metallurgically produced
conditions PBF-SA and PBF-AB.Where the paper says it
Where the paper says it
Where the paper says it
Electronic Property Changes
The electronic properties were examined using Seebeck coefficients, which are sensitive to small changes in the electronic density of states at the Fermi edge. All samples showed negative Seebeck coefficients, and differences between the three samples with identical global chemical composition but different processing routes were evident in their absolute values. p. 6 The differences between the three samples with identical global chemical composition but different
processing are evident. The conventionally processed sample CON-SA and the samples processed by
PBF, PBF-SA and PBF-AB, differ in the absolute value of the Seebeck coefficients, even in the reference
condition where no hydrogen was incorporated.Where the paper says it
The hydrogen-treated samples showed measurable differences compared to the reference samples, with absolute values of the Seebeck coefficient being smaller than those of the argon-treated samples. p. 6 Notably, the trends in the absolute Seebeck
coefficients of the samples do not correlate with differences in dislocation density. In all cases, the hydrogen-treated samples show measurable differences compared to the reference
samples: the absolute values of the Seebeck coefficient are smaller than the values of the argontreated samples. Therefore,
measurable changes in a transport coefficient in the percentage range cannot be explained simply by
the additional number of charge carriers. We conclude that there should be an electronic mechanism
at work, which warrants further study and potentially also could be used sensing principle based on
Seebeck measurements as proposed in Ref.Where the paper says it
Where the paper says it
Magneto-structural Inhomogeneities
Magneto-structural properties were probed by a combination of diffuse neutron scattering and magnetic small-angle neutron scattering (SANS). Magnetic SANS revealed an additional signature of nanoscale inhomogeneities in the PBF-AB processed sample with and without hydrogen incorporation. p. 9 In this sample, the effect of hydrogen incorporation on the scattering
response is negligible. For the samples PBF-SA and PBF-AB (2) and (3), SANS reveals an additional signature of nanoscale
inhomogeneities that is observed in the Q ranges of 0.Where the paper says it
For the PBF-AB condition, a Guinier radius of RG = 17. p. 9 A Guinier radius of RG = 17. 9(2) nm is derived for the inhomogeneities in the PBF-AB
as-built condition (sample 3). A Guinier radius of RG = 17. 9(2) nm is derived for the inhomogeneities in the PBF-AB
as-built condition (sample 3). 1
Impact of hydrogen incorporation on electronic and magnetic structure of
X2CrNi18-9 stainless steel
Torben Tappea,b, Louis Beckerc
, Gaurav Kanud
, Thomas F. Headene
, Dirk Honeckere
, Gabi Schierninga,b,f
,
Santiago Benitoc
, Sebastian Weberc
, Klara Lünsera,b
, Sabrina Dischd,f,*
a) Applied Quantum Materials, Institute for Energy und Materials Processes (EMPI), Faculty of Engineering, University of Duisburg-Essen,
47057 Duisburg, Germany
b) Research Center Future Energy Materials and Systems (RC FEMS), University Alliance Ruhr, 44780 Bochum, Germany
c) Chair of Materials Technology, Ruhr University Bochum, Universitaetsstr. 2(1) nm in the annealed state (PBF-SA). We attribute this observation to a clear
structural effect of hydrogen incorporation, such as an enrichment of hydrogen near the grain
boundaries.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Conclusion and Future Directions
The study concludes that hydrogen incorporation causes measurable changes in the electronic structure of all samples, reflected in a reduction in the absolute values of the Seebeck coefficients. Evidence of the formation of short range order nanoscale inhomogeneities was found, and hydrogen preferentially accumulates in their vicinity. p. 0 Magnetic SANS in conjunction with diffuse neutron scattering indicates the
existence of nanoscale inhomogeneities with the same fcc structure as the bulk, but with correlation
lengths of a few nanometres. The size of these inhomogeneities increased with hydrogen
incorporation, suggesting that hydrogen preferentially accumulates in their vicinity. 1
Impact of hydrogen incorporation on electronic and magnetic structure of
X2CrNi18-9 stainless steel
Torben Tappea,b, Louis Beckerc
, Gaurav Kanud
, Thomas F. Headene
, Dirk Honeckere
, Gabi Schierninga,b,f
,
Santiago Benitoc
, Sebastian Weberc
, Klara Lünsera,b
, Sabrina Dischd,f,*
a) Applied Quantum Materials, Institute for Energy und Materials Processes (EMPI), Faculty of Engineering, University of Duisburg-Essen,
47057 Duisburg, Germany
b) Research Center Future Energy Materials and Systems (RC FEMS), University Alliance Ruhr, 44780 Bochum, Germany
c) Chair of Materials Technology, Ruhr University Bochum, Universitaetsstr. However, it has
recently been shown that steel samples loaded with different amounts of hydrogen differed
significantly in their Seebeck coefficients [23]. Here, the Seebeck coefficient represents a sensitive
probe for changes in the steepness of the electronic density of states near the Fermi edge [24].Where the paper says it
Where the paper says it
Where the paper says it
Experimental Details
The material was produced using three different manufacturing routes, as detailed in Ref. [16]. The wrought material was manufactured by melting a 3 kg ingot in a vacuum induction furnace under an argon atmosphere at 500 mbar. p. 1 To investigate the role of chemical homogeneity on the effects of
hydrogen absorption, we created a matrix of three prepared material states. For each state, we
subjected one sample to a hydrogen atmosphere and one reference sample to a pure argon
atmosphere. Since ferrite has an inherently higher solubility for Cr and a lower solubility for Ni, Ni partitions into the
remaining liquid, promoting austenitic solidification of the residual melt. The reason why no local variations in ΔG or elemental distributions are observed for the PBF-SA and
PBF-AB conditions is the small melt volumes present during powder atomization and powder bed
fusion-laser beam melting (PBF-LB/M) fabrication.Where the paper says it
Where the paper says it
Hydrogen charging involved loading the autoclave with 100% H2 to an initial pressure of 10 bar at room temperature. p. 5 2 Electronic and magneto-structural properties
To understand how the processing routes and consequent microstructures influence electronic and
magneto-structural properties with and without hydrogen incorporation, we measured the Seebeck
coefficient, diffuse neutron scattering and small-angle neutron scattering (SANS). Taking into account
the different sample geometries, the samples were loaded in an autoclave at 300 °C and a pressure of
10 bar in 100% hydrogen gas for as long as necessary to ensure complete and homogeneous
incorporation of hydrogen in each case. , the higher its concentration of conduction electrons
[32]. Differences between the heating and cooling curves in the temperature range between 300 K and
345 K are minor. 7
Figure 4: Temperature-dependent Seebeck coefficient S in the range 300–345 K CON-SA, PBF-SA, and PBF-AB. Measurements are shown for the hydrogen-free and hydrogen-incorporated conditions.Where the paper says it
Where the paper says it
Where the paper says it
Seebeck measurement was performed using a ULVAC Riko ZEM-3 system in the steady-state directmethod configuration. p. 5 The thermoelectric voltage was measured in a direct measurement
protocol from 300 K to 345 K. The heating and cooling curves were measured for each material state
in order to monitor differences, for example due to hydrogen effusion. , the higher its concentration of conduction electrons
[32]. Differences between the heating and cooling curves in the temperature range between 300 K and
345 K are minor.Where the paper says it
Where the paper says it
Neutron total scattering (neutron PDF) was measured on the Near and Intermediate Range Order Diffractometer (NIMROD) at the ISIS pulsed source. p. 7 Theoretical reflection positions for the austenite phase (FCC) are marked. To investigate this question further, we first examined the PBF-AB sample with regard to its
microscopic structural properties, both with and without hydrogen incorporation using diffuse neutron
scattering at the NIMROD instrument (RAL-ISIS) [33]. 9
long-range (light grey) and short-range (dark grey) ordered phases, and the difference between data
and fit (green). The differential pair correlation function D(r) obtained by Fourier transform of the data, shown in
Figure 6, is in excellent agreement with the austenite phase.Where the paper says it
Where the paper says it
Magnetic SANS data was measured at the ZOOM instrument (ISIS, UK) both in an applied magnetic field of 1 T and in a near-remanence state (0 T). p. 9 The magnetic SANS by the three samples under study in hydrogen-treated and Ar-treated conditions
is presented in Figure 8. Data was acquired at the ZOOM instrument (RAL-ISIS) both in an applied
magnetic field of 1 T and in a near-remanence state (0 T). For the samples PBF-SA and PBF-AB (2) and (3), SANS reveals an additional signature of nanoscale
inhomogeneities that is observed in the Q ranges of 0. 02 Å
-1 and modelled using a Guinier law
contribution [38].Where the paper says it
Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Better predictive modeling for hydrogen uptake efficiency in austenitic steels can be achieved by tuning PBF processing parameters to rationally optimize hydrogen uptake efficiency by understanding how
the composition and length scales of the cell boundaries might be tuned by PBF processing parameters.
-
The improved AI system can serve as a sensitive non-destructive probe for hydrogen incorporation within materials because
the observed changes in the measured Seebeck coefficients could potentially serve as sensitive probes for non-destructive investigation of hydrogen incorporation within these materials.
-
The AI system can differentiate between the effects of chemical inhomogeneity and hydrogen incorporation by analyzing magnetic SANS data, specifically identifying that
hydrogen preferentially accumulates in the vicinity of these nanoscale segregation structure
and leads to areduction in spin disorder due to the incorporation of hydrogen.
Abstract
Hydrogen absorption significantly alters the mechanical properties of steel. However, absorbed hydrogen also influences its electronic and magneto-structural properties, helping to interpret how hydrogen is incorporated. This study therefore investigates the influence of hydrogen incorporation on the electronic and magneto-structural properties of X2CrNi18-9 stainless steel in different microstructural states. Microstructural characterization included analytic electron microscopy mapping, X-ray diffraction and thermodynamic stability maps to evaluate grain size, dislocation density and chemical homogeneity. The electronic properties were characterized using the Seebeck coefficient, while the magneto-structural properties were investigated using diffuse neutron scattering and small-angle neutron scattering (SANS). Hydrogen incorporation showed clear changes in the Seebeck coefficients. Magnetic SANS in conjunction with diffuse neutron scattering indicates the existence of nanoscale inhomogeneities with the same fcc structure as the bulk, but with correlation lengths of a few nanometres. The size of these inhomogeneities increased with hydrogen incorporation, suggesting that hydrogen preferentially accumulates in their vicinity. However, no direct correlation between the electronic and magneto-structural properties and the dislocation density could be demonstrated. We suggest that studies such as these will lead in the medium term to the development of guidelines for material design to make steels more resistant to hydrogen.
Related papers
- Structural contribution to light-induced gap suppression in Ta 2 NiSe 5
- Anatomy of fast current-induced skyrmion motion in synthetic antiferromagnets
- Magnetic control of an exciton-polariton condensate in a van der Waals magnet
- High-pressure elastic properties of GeO2 polymorphs up to 120 GPa
- Decoupling Strain-Rate Sensitivity and Deformation Length Scale Effects in Neutron-Irradiated Tungsten: A Coupled Nano-Indentation, HR-EBSD and Crystal Plasticity Study
- Magnetism modulation in Co3Sn2S2 by current-assisted domain wall motion