Superradiant scattering by rotating black-bounce black holes

arXiv:2601.03415 · gr-qc · Submitted 2026-01-06 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: General Relativity and Quantum Cosmology. The day in general relativity and quantum cosmology.

Kai: We're looking at the paper: "Superradiant scattering by rotating black-bounce black holes".

Mira: Here's the gist of the paper. Superradiant scattering by rotating black-bounce black holes investigates superradiant scattering off a rotating regular black hole described by a blackbounce metric which generalizes the Kerr spacetime of mass M and specific angular momentum a through a regularization parameter p and two deformation exponents (k, n) Focusing on massless (l, m) = (1, 1) scalar modes, we explore the parameter space and compute amplification factors by numerically integrating the separated radial Klein–Gordon equation We find that increasing n systematically enhances superradiance, whereas increasing k tends to suppress it In particular, certain configurations yield amplification levels up to 98% larger than the maximum amplification for standard Kerr black holes.

Kai: Spacetime Geometry and Parameters The rotating regular black hole geometry is characterized by the line element (2.1) and defined by parameters M, a, p, k, and n.

Mira: The spacetime reduces to the Kerr spacetime when p = 0.

Kai: A nonvanishing parameter p removes the central singularity and controls the deviation from Kerr together with (k, n).

Title and authors: Kai: So we're looking at this paper today titled "Superradiant scattering by rotating black-bounce black holes" by Pedro Henrique Croti Siqueira and Maurício Richartz. It's about taking the standard Kerr spacetime, which is what most physicists think of when they talk about rotating black holes, and modifying it.

Mira: Exactly. They introduce a blackbounce metric that generalizes Kerr using a regularization parameter p and two deformation exponents, k and n. This lets them explore spacetimes beyond the standard Kerr geometry <ref:2601.03415#pg2>.

Lev: So you're saying they're using these p, k, and n parameters to control how far the spacetime deviates from Kerr when p is not zero <ref:2601.03415#pg2>.

Kai: Right. The main focus of this work is looking at massless scalar modes with angular momentum l equals one and azimuthal number m equals one, which are often the simplest modes to study <ref:2601.03415#pg1>.

Mira: They use these specific modes to compute amplification factors by numerically integrating the separated radial Klein-Gordon equation, which is how they figure out how much scattering happens <ref:2601.03415#pg2>.

Lev: And they track the peak amplification and the corresponding frequency across this (a/M, p/M) parameter space for different combinations of k and n <ref:2601.03415#pg1>.

Kai: What's interesting is that they find that increasing n systematically enhances superradiance, while increasing k tends to suppress it <ref:2601.03415#pg1>.

Mira: That's a key finding because it shows how those deformation exponents actually affect the physics of the scattering process <ref:2601.03415#pg2>.

Lev: It means that even with these modifications, we still have to solve that radial Klein-Gordon equation numerically to get those amplification factors <ref:2601.03415#pg2>.

Kai: And they found some specific configurations where the amplification is up to ninety-eight percent larger than what you'd normally see for a standard Kerr black hole <ref:2601.03415#pg1>.

Mira: That ninety-eight percent figure is substantial, especially when considering the maximum amplification achievable in regular Kerr black holes <ref:2601.03415#pg1>.

Lev: That level of enhancement would mean that if we were building hardware based on these geometries, the signal we're looking for would be much stronger than expected from our current models <ref:2601.03415#pg2>.

Kai: But there are some caveats too; they found that for n equals one the peak amplification actually decreases as p/M increases at a fixed spin <ref:2601.03415#pg3>.

Mira: That nonmonotonic behavior with respect to the black-bounce parameter p is something we need to keep in mind when interpreting these results <ref:2601.03415#pg3>.

Lev: So, what does this mean for us in terms of practical application? Does this change how we think about error correction overhead?

Kai: Well, the paper suggests that certain configurations with n greater than one can actually yield amplification factors higher than the maximum amplification for standard Kerr black holes <ref:2601.03415#pg1>.

Mira: Specifically, when they look at (k, n) equals zero and three, they see an amplification factor as high as one hundred ninety-eight percent of the Kerr result <ref:2601.03415#pg3>.

Lev: A ninety-eight percent increase is significant for a simulation running on actual hardware; it suggests that if you can engineer a geometry close to those (k, n) values, your error correction overhead might be substantially reduced <ref:2601.03415#pg2>.

Kai: And they also noted that increasing k tends to suppress superradiance when n is two or three <ref:2601.03415#pg1>.

Mira: It seems the parameter n plays a central role in enabling these ultra-spinning configurations as p/M increases <ref:2601.03415#pg3>.

Lev: So, the paper points toward larger n values being beneficial for achieving higher amplification levels <ref:2601.03415#pg1>.

Kai: It also points to a nonmonotonic dependence of the peak amplification on p/M as p/M increases <ref:2601.03415#pg3>.

Mira: So, we're seeing that the near-horizon geometry modifications introduced by these deformation parameters are crucial for these ultra-spinning effects <ref:2601.03415#pg2>.

Lev: Before we wrap up, I think it’s important to remember that the authors explicitly state that they only explore massless scalar modes, which is a limitation in terms of the full scope of field interactions <ref:2601.03415#pg1>.

Kai: That's fair; they focused specifically on (l, m) equals (one one) modes for this analysis <ref:2601.03415#pg2>.

Mira: Overall, the paper "Superradiant scattering by rotating black-bounce black holes" shows that regular geometries beyond Kerr can lead to superradiant amplification levels up to ninety-eight percent greater than standard Kerr results under specific conditions <ref:2601.03415#pg1>.

Lev: It's a nice demonstration of how modifying the near-horizon structure with parameters like k and n can produce measurable changes in scattering physics <ref:2601.03415#pg2>.

Kai: So, we’ve seen how increasing n helps boost superradiance while increasing k tends to dampen it <ref:2601.03415#pg1>.

Mira: And the idea that these enhancements happen because of modifications to the near-horizon geometry is a big conceptual step for us <ref:2601.03415#pg2>.

Lev: It opens up avenues for exploring electromagnetic and gravitational perturbations in these modified spacetimes, which is where we'll be looking next <ref:2601.03415#pg2>.

The paper's summary: Kai: So, to recap, this paper looks at how superradiant scattering works when you use these black-bounce geometries instead of just standard Kerr black holes and they found some pretty big amplification factors <ref:2601.03415#pg1>.

Mira: Right. They’re basically using a metric with those parameters p, k, and n to generalize the Kerr spacetime, and they are specifically looking at massless scalar waves with angular momentum l equals one and azimuthal number m equals one <ref:2601.03415#pg1>.

Lev: And the main thing they compute is this amplification factor Z, defined by R squared times I squared minus one, which tells you how much energy you get back from the scattering process <ref:2601.03415#pg2>.

Kai: What’s interesting is their numerical scan across the parameter space—the spin a over M and the black-bounce parameter p over M—and they see that increasing n systematically boosts superradiance while increasing k tends to suppress it <ref:2601.03415#pg1>.

Mira: That’s a significant finding because it suggests that the way you deform the geometry with those k and n exponents actually matters a lot for whether you get that amplification or not <ref:2601.03415#pg2>.

Lev: But they also found some specific configurations, like when k equals zero and n equals three, where the amplification factor can hit as high as one hundred ninety-eight percent of what you'd see for standard Kerr black holes <ref:2601.03415#pg3>.

Kai: One hundred ninety-eight percent is a lot, and that’s what they’re pointing to when they suggest these modifications might lead to much stronger signals than we currently expect from standard models <ref:2601.03415#pg1>.

Mira: They also pointed out that this enhancement seems tied to changes in the near-horizon geometry caused by the regularity structure, allowing for those ultra-spinning configurations where a over M can be greater than one <ref:2601.03415#pg2>.

Lev: The caveat is that they noted a nonmonotonic dependence of the peak amplification on p over M; it doesn't just keep going up forever as you increase that parameter <ref:2601.03415#pg3>.

Kai: So, to summarize for someone listening—these black-bounce geometries show that tuning the deformation parameters n and k can actually lead to superradiant amplification levels nearly double what we see in standard Kerr spacetimes under certain conditions <ref:2601.03415#pg1>.

Mira: Yeah, it’s about seeing how those specific geometric deformations enable these higher amplification results and that the parameter n is central to unlocking those ultra-spinning effects as p over M increases <ref:2601.03415#pg3>.

Lev: This opens up avenues for us to think about how these modifications might impact the error correction overhead when we try to build hardware based on these kinds of spacetimes <ref:2601.03415#pg2>.

The paper's improvements: Kai: So, moving on from the results, this paper points to how they can actually improve their setup using these black-bounce models <ref:2601.03415#pg1>.

Mira: They are suggesting that by incorporating those deformation parameters k and n into the metric construction in Equation two point one, you get a geometry that’s already more general than just Kerr <ref:2601.03415#pg2>.

Lev: So they’re saying we should use these k and n parameters to explore a wider range of geometries beyond the standard Kerr limit where p is zero <ref:2601.03415#pg2>.

Kai: Exactly. It means if you want to test how sensitive this superradiance is to those specific near-horizon structures, you need those parameters in your metric definition <ref:2601.03415#pg2>.

Mira: And they show that the choice of (k, n) really dictates the physics; for instance, going from (k, n) equals zero and one to two and one gives you a rotating Bardeen-like spacetime <ref:2601.03415#pg2>.

Lev: That’s important because it means we aren't just studying a single geometry; we’re looking at how different deformation exponents lead to different types of black hole physics <ref:2601.03415#pg2>.

Kai: And they mention that the critical black-bounce parameter p c depends on both the spin a and those deformation exponents k and n <ref:2601.03415#pg2>.

Mira: Which is a big deal because it means there’s an interplay between how fast the black hole spins and these new geometric parameters that determines if you even get superradiance to happen <ref:2601.03415#pg2>.

Lev: From an error correction side, this suggests we need to model the scattering problem not just for Kerr, but for a whole family of these black-bounce spacetimes defined by those deformation exponents <ref:2601.03415#pg2>.

Kai: Right. It gives us more ways to probe the limits of what superradiance can actually achieve in these modified systems <ref:2601.03415#pg1>.

Mira: So, the implication is that we need to keep those deformation parameters k and n in mind when we design our theoretical models for black hole perturbations <ref:2601.03415#pg2>.

Lev: Before we move on, remember that the paper only looks at massless scalar modes with l equals one and m equals one; it doesn't cover electromagnetic or gravitational waves yet <ref:2601.03415#pg1>.

Conclusion: Tom: So we’ve covered how these black-bounce geometries change superradiant scattering and what those numbers look like <ref:2601.03415#pg1>.

Kai: Yeah, it boils down to this: by tuning the deformation exponents k and n, you can get amplification factors up to ninety-eight percent larger than what standard Kerr black holes give you under certain conditions <ref:2601.03415#pg3>.

Mira: That’s the main result, showing that those specific near-horizon structures allow for these ultra-spinning configurations where the spin a over M can be greater than one <ref:2601.03415#pg2>.

Lev: It’s interesting from an engineering standpoint because it suggests we need to account for these geometry modifications when calculating the error correction overhead for real hardware <ref:2601.03415#pg2>.

Kai: Exactly, and they also found that increasing n helps boost superradiance while increasing k tends to suppress it, which is a big clue about how those deformations behave <ref:2601.03415#pg1>.

Mira: And that nonmonotonic behavior of the peak amplification as p over M increases is something we need to keep in mind when we interpret these scattering factors <ref:2601.03415#pg3>.

Lev: So, the implication is that these black-bounce metrics aren't just theoretical curiosities; they are actual parameter spaces where you can find measurable enhancements in wave amplification <ref:2601.03415#pg2>.

Kai: True, and it opens up the door for us to explore how these kinds of modifications might affect electromagnetic and gravitational perturbations later on <ref:2601.03415#pg2>.

Mira: We’ve seen how tuning k and n impacts the physics of this superradiant scattering by rotating black-bounce black holes, a paper that shows geometry modification is key to getting those higher amplification levels <ref:2601.03415#pg1>.

Lev: I just want to emphasize that while these results are exciting, the authors flag the limitation that they only looked at massless scalar modes with l equals one and m equals one <ref:2601.03415#pg2>.

Pedro Henrique Croti Siqueira, Maurácio Richartz

Centro de MatemΩtica, ComputaΧεo e CogniΧεo, Universidade Federal do ABC · Centro de CiⅡencias Naturais e Humanas, Universidade Federal do ABC

gr-qc

Submitted: 2026-01-06

Updated: 2026-10-28

Comments: v2: 13 pages, 9 figures, 2 tables, new figures and table added to match published version

Journal ref: Phys. Rev. D 114, 084092 (2026)

DOI: 10.1103/s96j-r8vn

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 83/100

The gist: Superradiant scattering by rotating black-bounce black holes investigates superradiant scattering off a rotating regular black hole described by a blackbounce metric which generalizes the Kerr…

Key concepts

Black-bounce metric
This is a specific mathematical model for a rotating black hole that goes beyond the standard Kerr spacetime. It introduces regularization parameters (p, k, n) to remove the central singularity and control how much the geometry deviates from a typical Kerr black hole.
Superradiance condition
Superradiance occurs when waves scatter off a rotating object and gain energy, provided their frequency is less than the angular velocity of the event horizon. This condition dictates that certain wave modes can be amplified, leading to energy extraction from the rotating spacetime.
Deformation exponents (k, n)
These parameters modify the black-bounce geometry. The exponent 'n' is found to systematically enhance superradiance, while increasing 'k' tends to suppress it. They control how much the resulting spacetime deviates from a simple Kerr black hole.

Terminology

Summary

Superradiant scattering by rotating black-bounce black holes investigates superradiant scattering off a rotating regular black hole described by a blackbounce metric which generalizes the Kerr spacetime of mass M and specific angular momentum a through a regularization parameter p and two deformation exponents (k, n) Focusing on massless (l, m) = (1, 1) scalar modes, we explore the parameter space and compute amplification factors by numerically integrating the separated radial Klein–Gordon equation We find that increasing n systematically enhances superradiance, whereas increasing k tends to suppress it In particular, certain configurations yield amplification levels up to 98% larger than the maximum amplification for standard Kerr black holes. p. 0

Spacetime Geometry and Parameters

The rotating regular black hole geometry is characterized by the line element (2.1) and defined by parameters M, a, p, k, and n. p. 3 The spacetime reduces to the Kerr spacetime when p = 0. p. 1 A nonvanishing parameter p removes the central singularity and controls the deviation from Kerr together with (k, n). p. 1 The choice (k, n) = (0, 1) yields the rotating Simpson-Visser spacetime while (k, n) = (2, 1) corresponds to the rotating Bardeen-like spacetime. p. 1 The critical blackbounce parameter pc depends on the spin as well as on the deformation exponents. p. 1

Scalar Field Dynamics and Superradiance Condition

The dynamics of a test massless scalar field Φ are governed by the Klein-Gordon equation (2.4). The scalar field is decomposed into modes of frequency ω, azimuthal number m ∈ Z, and orbital number l ≥ m using the standard ansatz (2. p. 15). The radial equation takes the form involving a separation constant λωlm (2. p. 17). The superradiant amplification factor Z is defined as Z = R2 I2 − 1 (2. p. 311). Superradiance typically occurs when the wave frequency ω and the azimuthal number m satisfy 0 < ω < momegaH, where omegaH is the angular velocity of the event horizon (1. p. 01).

Numerical Analysis and Results

The amplification factor Z is computed by solving the scattering problem numerically by integrating the radial wave equation (2.7). The scan starts at a/M = 0. p. 398 and p/M = 0, corresponding to a rapidly rotating Kerr black hole. p. 3 The scan proceeds by increasing the spin a/M in steps ∆a/M and varying the black-bounce parameter p/M in steps of ∆p/M. p. 3 The maximum superradiant amplification factor Zmax is identified across the parameter space (3. p. 33).

Impact of Deformation Parameters

The results show that for n = 1, the peak amplification Z decreases monotonically with increasing p/M at fixed a/M. Conversely, for sufficiently small values of p/M, the dependence of the peak amplification on the spin is nonmonotonic. p. 3 For n > 1 configurations, regions exist where superradiant amplification exceeds the maximum amplification for Kerr black holes. p. 6 Specifically, when (k, n) = (0, 3), the amplification factor can be as high as 198% of the Kerr result. p. 6 Increasing k tends to suppress superradiance for fixed n = 2 and n = 3. p. 0

Conclusion on Enhancements

The analysis identifies regimes, specifically for n > 1, in which the superradiant amplification exceeds the Kerr maximum by up to 98%. These enhancements appear to be associated with modifications of the near-horizon geometry induced by the regularity structure which allow for superspinning configurations with a/M > 1. p. 6 An important outcome is the identification of a nontrivial dependence of the peak amplification on p/M, exhibiting nonmonotonic behavior as p/M increases. p. 6 The parameter n plays a central role in enabling ultra-spinning configurations as p/M increases, with larger n leading to enhanced superradiant amplification. p. 6 The parameter k tends to suppress superradiance. p. 0 The work opens avenues for future investigation into electromagnetic and gravitational perturbations and stability analyses in the ultra-spinning regime. p. 6

Data Availability

Data supporting the findings of this work are openly available. The research was partially financed by the Coordena¸c˜ao de Aperfei¸coamento de Pessoal de N´ıvel Superior (CAPES, Brazil) - Finance Code 001. p. 7 PHCS acknowledges support from the S˜ao Paulo Research Foundation (FAPESP, Brazil), grant 2022/07298-4. p. 7 p. 7 MR acknowledges partial support from the Conselho Nacional de Desenvolvimento Cient´ıfico e Tecnol´ogico (CNPq, Brazil, grant 315991/2023-2), and from the S˜ao Paulo Research Foundation (FAPESP, Brazil, grant 2022/08335-0. p. 7 p. 7 PHCS thanks the Strong Group at the Niels Bohr Institute for their kind hospitality while part of this work was carried out. p. 7 p. 7 The Tycho supercomputer hosted at the SCIENCE HPC center at the University of Copenhagen was used for supporting this work. p. 7 p. 7

Acknowledgments

This research was partially financed by the Coordena¸c˜ao de Aperfei¸coamento de Pessoal de N´ıvel Superior (CAPES, Brazil) - Finance Code 001. PHCS acknowledges support from the S˜ao Paulo Research Foundation (FAPESP, Brazil), grant 2022/07298-4. MR acknowledges partial support from the Conselho Nacional de Desenvolvimento Cient´ıfico e Tecnol´ogico (CNPq, Brazil, grant 315991/2023-2), and from the S˜ao Paulo Research Foundation (FAPESP, Brazil, grant 2022/08335-0. PHCS thanks the Strong Group at the Niels Bohr Institute for their kind hospitality while part of this work was carried out. The Tycho supercomputer hosted at the SCIENCE HPC center at the University of Copenhagen was used for supporting this work. The references listed are [1] through [84].

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Model generation for black hole physics can be improved to include regular geometries beyond Kerr by incorporating deformation parameters k and n into metric construction, allowing AI systems to explore parameter spaces such as (a/M, p/M) and determine the resulting spacetime structure as described in Equation 2.1.

  2. Superradiance analysis can be enhanced by implementing a numerical scheme that solves the radial Klein-Gordon equation numerically up to r2 = 200M and varies the frequency omega, enabling AI systems to compute amplification factors Z and identify peak frequencies omega max for various deformation scenarios (k, n).

  3. The AI system can be trained to predict whether superradiant amplification exceeds Kerr maximum based on the deformation exponents k and n, using data from Table I which shows enhancements up to 198% for (k, n) = (0, 3).

  4. The system can perform targeted searches in parameter space by refining scans around the global maximum (amax/M, pmax/M) using high-resolution steps like delta a/M = 0.0001 and delta p/M = 0.005, improving precision for finding Zmax and omega max.

  5. AI can distinguish between the effects of deformation parameters by analyzing how increasing n enhances superradiance while increasing k tends to suppress it, as noted in Section IV, In contrast, increasing k tends to suppress superradiance.

Sources

Related papers