Manipulating anomalous transport via crystal symmetry in two-dimensional altermagnets

arXiv:2601.01564 · cond-mat.mes-hall · Submitted 2026-01-04 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Manipulating anomalous transport via crystal symmetry in two-dimensional altermagnets".

Mira: Here's the gist of the paper. Manipulating anomalous transport via crystal symmetry in two-dimensional altermagnets introduces a strategy to control and reverse anomalous Hall and Nernst effects in 2D altermagnetic systems by breaking crystal symmetry The authors demonstrate that breaking the symmetry connecting the two magnetic sublattices suffices to induce both the AHE and ANE, allowing for tunable sign-reversible anomalous transport Anomalous transports, such as the anomalous Hall effect (AHE) and anomalous Nernst effect (ANE), are typical manifestations of time-reversal-symmetry-breaking responses in materials The two Hall states with opposite Hall conductivities can be regarded as time-reversal pairs coupled to magnetic order, and switching between them relies on reversing the magnetization via an external magnetic field or electric current Altermagnetism (AM) is a new magnetic phase characterized by non-relativistic alternating spin splitting in momentum space and collinear compensated magnetic orders in real space, combining ferromagnetic and antiferromagnetic order Symmetry Analysis for Transport Manipulation To achieve manipulation of anomalous transport in 2D AM system via crystal symmetry, two conditions must be satisfied: (i) The pristine system exhibits no anomalous Hall response; (ii) Upon breaking the crystal symmetry connecting the two spin sublattices, an anomalous Hall signal emerge The general symmetry operations that connect the two spin sublattices in the spin space group can be written as G ⊗ S The set of magnetic group operations in 2D AMs with an out-of-plane N´eel vector will cause the anomalous Hall conductivity to vanish Once the symmetry connecting the magnetic sublattice is broken, the system transitions from an AM to a ferrimagnet, thereby exhibiting an anomalous Hall response akin to that of a ferromagnet with out-of-plane magnetization Lattice Model and Symmetry Breaking Perturbations The feasibility of the proposal is demonstrated by constructing a lattice model based on symmetry analysis The authors introduce two distinct ways for symmetry breaking, which yield anomalous Hall conductances with opposite signs because they are mapped onto each other via C4zT The first symmetry-breaking term, Hbreak−I (k), breaks the energy equivalence between spin-up and spin-down bands The second symmetry-breaking term, Hbreak−II (k), imposes an opposite energy shift on the Weyl points compared to the first one Material Realization and Quantum Effects The feasibility is verified using a 2D altermagnetic material, monolayer Cr2O2, which exhibits no AHE with out-of-plane magnetization due to the presence of C4zT Uniaxial strain that breaks C4z symmetry can produce a finite anomalous Hall response where the anomalous Hall and anomalous Nernst conductances are equal in magnitude but opposite in sign Further increasing the strain drives the system into a quantum anomalous Hall state whose Chern number can likewise be switched by reversing the strain axis The study successfully achieves controllable reversal of the quantum anomalous transport signature by applying tensile strain along the a-axis, which breaks the C4zT symmetry Altering the strain direction to the b-axis reverses both the anomalous Hall conductance and Nernst conductance, enabling effective control over the sign of anomalous transport The proposed scheme for controlling anomalous transport is universal, as external fields can also achieve this by breaking symmetry to connect the magnetic sublattice Material Characterization via Cr2O2 First-principles calculations on monolayer Cr2O2 show that the system hosts a pair of spin-up and a pair of spin-down Weyl points lying at the same energy, which can be topologically nontrivial The inclusion of SOC opens a gap at these Weyl points, leading to quantized anomalous transport properties with Chern numbers C = 0, −1, and +1 This topological classification naturally leads to anomalous Hall conductivity with opposite signs, thereby enabling control of the quantized anomalous transport via crystal symmetry Verification of Sign Reversal in QAHE The sign reversal in the quantum anomalous Hall effect is achieved by applying 10% biaxial strain along the b-axis to Cr2O2, which results in a Chern number of C = +1 This leads to a sign reversal in the anomalous Hall conductivity plateau, accompanied by a corresponding reversal in the anomalous Nernst conductivity The authors successfully achieved a controllable reversal of the quantum anomalous transport signature Verification of AHE and ANE Sign Reversal The results show that for pristine AM with an out-of-plane N´eel vector, the anomalous Hall conductivity is always zero Applying two symmetry-breaking perturbations can induce two opposite anomalous Hall conductivities The breaking of crystal symmetry can similarly realize the sign reversal of the ANE in the model First-Principles Calculations and Results First-principles calculations using VASP with LSDA and Hubbard U correction indicate that Cr2O2 exhibits AM semi-metallic behavior, with both spin-up and spin-down channels featuring two Weyl points at the Fermi level The calculated Chern number of Fig.

Kai: 2(g)-(i) is 0, −1 and +1, respectively The distinct topological numbers of −1 and +1 will naturally lead to anomalous Hall conductivity with opposite signs The distribution shows that for the phase with C = 0, four pronounced peaks emerge, which can be categorized into two sets with opposite values that satisfy C4zT symmetry Anomalous Transport Calculations The energy-resolved anomalous Hall conductivity and Nernst conductivity show that for pristine AM with an out-of-plane N´eel vector, the anomalous Hall conductivity is always zero Applying two symmetrybreaking perturbations can induce two opposite anomalous Hall conductivities The quantized plateau within the bandgap indicates the characteristic of the QAHE Moreover, the anomalous Nernst conductivity also exhibits similar characteristics, and breaking of crystal symmetry can similarly realize the sign reversal of the ANE in our model The results show that for pristine AM with an out-of-plane N´eel vector, the anomalous Hall conductivity is always zero Applying two symmetrybreaking perturbations can induce two opposite anomalous Hall conductivities In summary, a new strategy to achieve the controllable emergence and sign reversal of the AHE and ANE in 2D AM materials is proposed By constructing a lattice model, the authors show that the sign of anomalous transport can be tuned by selecting different perturbation terms The findings open a new avenue for designing next-generation spintronic devices based on anomalous transport in altermagnetic materials The proposed scheme for controlling anomalous transport is universal, as long as external fields can break the symmetry to connect the magnetic sublattice Acknowledgments and References The work was supported by the National Natural Science Foundation of China (Grant No.

Mira: 12304086, No.

Kai: 12564017, No.

Paper summary: Kai: So we've just talked about how this paper proposes using crystal symmetry to control the anomalous Hall effect and Nernst effect in two-dimensional altermagnet systems. The core claim is that breaking the crystal symmetry between the two magnetic sublattices is sufficient to induce both anomalous Hall and Nernst effects, which are usually time-reversal-symmetry-breaking responses.

Mira: Right, and it matters because they show that this modulation strategy allows for tunable sign reversal of anomalous transport. They demonstrate that this can be achieved by breaking the symmetry connecting the two magnetic sublattices.

Lev: It’s important to understand that they start with a system where there is no intrinsic anomalous Hall response when the magnetization is out-of-plane, and then they show how symmetry breaking creates it.

Kai: The paper builds a lattice model to explore this, introducing two distinct ways for symmetry breaking which end up yielding anomalous Hall conductances with opposite signs because they are linked by the C4zT operation.

Mira: That linkage is what allows them to tune the sign, and they show that this is achieved by having one symmetry-breaking term break band equivalence while another term shifts the Weyl points oppositely.

Lev: It’s interesting from a simulation standpoint because it shows that you can design these effects not just by tweaking magnetic order, but by designing the underlying lattice structure itself.

Kai: Then they move to real materials, specifically monolayer Cr2O2, which has no intrinsic AHE with an out-ofplane magnetization due to its C4zT symmetry. Uniaxial strain breaks that symmetry and yields equal magnitude but opposite sign anomalous Hall and Nernst conductances.

Mira: They then show that increasing the strain pushes it into a quantum anomalous Hall state where the Chern number can be switched by reversing the strain axis, which is a topological feature they are controlling directly.

Lev: From an engineering view, controlling that Chern number via strain suggests we can engineer devices where the transport property is intrinsically linked to external mechanical stress applied to the material.

Kai: The paper ends by summarizing that this strategy gives them controllable reversal of the quantum anomalous transport signature by applying tensile strain along the a-axis and then changing it to be along the b-axis, which reverses both effects.

Mira: So essentially, they provide a universal scheme for controlling anomalous transport in two-dimensional altermagnetic materials by breaking crystal symmetry.

Conclusion: Kai: To wrap up, the paper "Manipulating anomalous transport via crystal symmetry in two-dimensional altermagnets" shows that the key to controlling AHE and ANE sign reversal lies in manipulating the crystal structure, specifically by breaking that connection between magnetic sublattices.

Mira: They prove that this is possible by showing a lattice model where two different symmetry-breaking terms can generate opposite signs of anomalous transport because they map onto each other via the C4zT operation.

Lev: The implication for the field is that we can move beyond just using external magnetic fields as a tool; we can use structural engineering to achieve sign control in spintronic devices.

Kai: It opens a new avenue for designing next-generation devices where the anomalous transport properties are engineered from the bottom up based on crystal symmetry.

Mira: It moves the focus toward realizing these effects in materials like monolayer Cr2O2, where strain becomes a direct lever for switching topological states.

Lev: The work lays out a clear pathway for how researchers can go about building hardware that relies on strain control to achieve sign reversal in transport measurements.

Research Center for Quantum Physics and Technologies, Inner Mongolia University, Hohhot 010021, China · Key Laboratory of Semiconductor Photovoltaic Technology and Energy Materials at Universities of Inner Mongolia Autonomous Region, Inner Mongolia University, Hohhot 010021, China · Key Lab of Advanced Optoelectronic Quantum Architecture and Measurement (MOE), Beijing Key Lab of Nanophotonics & Ultrafine Optoelectronic Systems, and School of Physics, Beijing Institute of Technology, Beijing 100081, China · Inner Mongolia Key Laboratory of Microscale Physics and Atom Innovation, Inner Mongolia University, Hohhot 010021, China · School of Physical Science and Technology, Tiangong University, Tianjin 300387

cond-mat.mes-hall

Submitted: 2026-01-04

Updated: 2026-11-11

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 84/100

The gist: Manipulating anomalous transport via crystal symmetry in two-dimensional altermagnets introduces a strategy to control and reverse anomalous Hall and Nernst effects in 2D altermagnetic systems by…

Key concepts

Altermagnetism (AM)
A new magnetic phase combining ferromagnetic and antiferromagnetic order. It is characterized by non-relativistic alternating spin splitting in momentum space and collinear compensated magnetic orders in real space.
Anomalous Hall Effect (AHE) and Nernst Effect (ANE)
These are transport phenomena that occur when time-reversal symmetry is broken in materials with magnetic order. They manifest as opposite Hall conductivities, which can be switched by reversing magnetization or applying external fields.
Crystal Symmetry Breaking
The core strategy involves intentionally breaking the crystal symmetry of the material. This structural change is used to connect different spin sublattices, which is shown to induce anomalous Hall signals where none existed before.

Terminology

Summary

Manipulating anomalous transport via crystal symmetry in two-dimensional altermagnets introduces a strategy to control and reverse anomalous Hall and Nernst effects in 2D altermagnetic systems by breaking crystal symmetry The authors demonstrate that breaking the symmetry connecting the two magnetic sublattices suffices to induce both the AHE and ANE, allowing for tunable sign-reversible anomalous transport

Introduction to Altermagnetism and Anomalous Transport

Anomalous transports, such as the anomalous Hall effect (AHE) and anomalous Nernst effect (ANE), are typical manifestations of time-reversal-symmetry-breaking responses in materials The two Hall states with opposite Hall conductivities can be regarded as time-reversal pairs coupled to magnetic order, and switching between them relies on reversing the magnetization via an external magnetic field or electric current Altermagnetism (AM) is a new magnetic phase characterized by non-relativistic alternating spin splitting in momentum space and collinear compensated magnetic orders in real space, combining ferromagnetic and antiferromagnetic order

Symmetry Analysis for Transport Manipulation

To achieve manipulation of anomalous transport in 2D AM system via crystal symmetry, two conditions must be satisfied: (i) The pristine system exhibits no anomalous Hall response; (ii) Upon breaking the crystal symmetry connecting the two spin sublattices, an anomalous Hall signal emerge The general symmetry operations that connect the two spin sublattices in the spin space group can be written as G ⊗ S The set of magnetic group operations in 2D AMs with an out-of-plane N´eel vector will cause the anomalous Hall conductivity to vanish Once the symmetry connecting the magnetic sublattice is broken, the system transitions from an AM to a ferrimagnet, thereby exhibiting an anomalous Hall response akin to that of a ferromagnet with out-of-plane magnetization

Lattice Model and Symmetry Breaking Perturbations

The feasibility of the proposal is demonstrated by constructing a lattice model based on symmetry analysis The authors introduce two distinct ways for symmetry breaking, which yield anomalous Hall conductances with opposite signs because they are mapped onto each other via C4zT The first symmetry-breaking term, Hbreak−I (k), breaks the energy equivalence between spin-up and spin-down bands The second symmetry-breaking term, Hbreak−II (k), imposes an opposite energy shift on the Weyl points compared to the first one

Material Realization and Quantum Effects

The feasibility is verified using a 2D altermagnetic material, monolayer Cr2O2, which exhibits no AHE with out-of-plane magnetization due to the presence of C4zT Uniaxial strain that breaks C4z symmetry can produce a finite anomalous Hall response where the anomalous Hall and anomalous Nernst conductances are equal in magnitude but opposite in sign Further increasing the strain drives the system into a quantum anomalous Hall state whose Chern number can likewise be switched by reversing the strain axis

Conclusion on Controllable Sign Reversal

The study successfully achieves controllable reversal of the quantum anomalous transport signature by applying tensile strain along the a-axis, which breaks the C4zT symmetry Altering the strain direction to the b-axis reverses both the anomalous Hall conductance and Nernst conductance, enabling effective control over the sign of anomalous transport The proposed scheme for controlling anomalous transport is universal, as external fields can also achieve this by breaking symmetry to connect the magnetic sublattice

Material Characterization via Cr2O2

First-principles calculations on monolayer Cr2O2 show that the system hosts a pair of spin-up and a pair of spin-down Weyl points lying at the same energy, which can be topologically nontrivial The inclusion of SOC opens a gap at these Weyl points, leading to quantized anomalous transport properties with Chern numbers C = 0, −1, and +1 This topological classification naturally leads to anomalous Hall conductivity with opposite signs, thereby enabling control of the quantized anomalous transport via crystal symmetry

Verification of Sign Reversal in QAHE

The sign reversal in the quantum anomalous Hall effect is achieved by applying 10% biaxial strain along the b-axis to Cr2O2, which results in a Chern number of C = +1 This leads to a sign reversal in the anomalous Hall conductivity plateau, accompanied by a corresponding reversal in the anomalous Nernst conductivity The authors successfully achieved a controllable reversal of the quantum anomalous transport signature

Verification of AHE and ANE Sign Reversal

The results show that for pristine AM with an out-of-plane N´eel vector, the anomalous Hall conductivity is always zero Applying two symmetry-breaking perturbations can induce two opposite anomalous Hall conductivities The breaking of crystal symmetry can similarly realize the sign reversal of the ANE in the model

First-Principles Calculations and Results

First-principles calculations using VASP with LSDA and Hubbard U correction indicate that Cr2O2 exhibits AM semi-metallic behavior, with both spin-up and spin-down channels featuring two Weyl points at the Fermi level The calculated Chern number of Fig. 2(g)-(i) is 0, −1 and +1, respectively The distinct topological numbers of −1 and +1 will naturally lead to anomalous Hall conductivity with opposite signs The distribution shows that for the phase with C = 0, four pronounced peaks emerge, which can be categorized into two sets with opposite values that satisfy C4zT symmetry

Anomalous Transport Calculations

The energy-resolved anomalous Hall conductivity and Nernst conductivity show that for pristine AM with an out-of-plane N´eel vector, the anomalous Hall conductivity is always zero Applying two symmetrybreaking perturbations can induce two opposite anomalous Hall conductivities The quantized plateau within the bandgap indicates the characteristic of the QAHE Moreover, the anomalous Nernst conductivity also exhibits similar characteristics, and breaking of crystal symmetry can similarly realize the sign reversal of the ANE in our model The results show that for pristine AM with an out-of-plane N´eel vector, the anomalous Hall conductivity is always zero Applying two symmetrybreaking perturbations can induce two opposite anomalous Hall conductivities

Conclusion and Future Directions

In summary, a new strategy to achieve the controllable emergence and sign reversal of the AHE and ANE in 2D AM materials is proposed By constructing a lattice model, the authors show that the sign of anomalous transport can be tuned by selecting different perturbation terms The findings open a new avenue for designing next-generation spintronic devices based on anomalous transport in altermagnetic materials The proposed scheme for controlling anomalous transport is universal, as long as external fields can break the symmetry to connect the magnetic sublattice

Acknowledgments and References

The work was supported by the National Natural Science Foundation of China (Grant No. 12304086, No. p. 7 12564017, No. p. 7 12304066, Grant No. p. 7 12304165) The paper includes numerous references spanning condensed matter physics and topological insulators

Appendix Details

First-principles calculations were performed using the Vienna ab initio Simulation Package (VASP) with the projector-augmented wave (PAW) method The intrinsic anomalous Hall conductivity was calculated via the Kubo formula The anomalous Nernst conductivity is given by equation (A3) Supplemental figures present the energy-dependent anomalous Hall and Nernst conductivities for both models The band structure of Cr2O2 with SOC shows that all band crossing points have opened a gap The calculated Chern number of Fig.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Enhanced predictive capability for anomalous transport in altermagnetic systems by incorporating crystal symmetry engineering into material design. The improved system can predict which 2D altermagnets will host anomalous Hall transport based on their out-of-plane Néel vector and potential crystal symmetries, as demonstrated by the finding that 2D altermagnets (AM) with out-ofplane Néel vectors will not host any anomalous Hall transport.

  2. Tunable control over the sign of anomalous transport conductivity by engineering symmetry breaking terms in a lattice model. The improved system can determine which specific symmetry breaking perturbations, such as those related to C4z rotation or uniaxial strain, will induce opposite signs of the anomalous Hall and Nernst conductivities, realizing tunable sign-reversible anomalous transport.

  3. Design of next-generation spintronic devices leveraging crystal symmetry manipulation. The improved system can guide the design of devices by identifying specific material structures like monolayer Cr2O2 and predicting how external perturbations, such as uniaxial strain along the a or b axis, will switch the sign of anomalous transport in a predictable manner.

  4. Realization of quantum anomalous Hall effect (QAHE) with controlled sign reversal. The improved system can predict conditions under which QAHE can be achieved and subsequently reversed by changing crystal symmetry, specifically showing how the strain direction is altered to the b-axis, we observe that only the band inversion at Y-point remains in the band, resulting in a pair of spin-down Weyl points leading to a sign reversal.

  5. Verification of theoretical predictions through first principles calculations for novel materials. The improved system can perform first-principles calculations using methods like VASP and WANNIER90 to calculate quantities such as the intrinsic anomalous Hall conductivity sigmaxy and anomalous Nernst conductivity alphaxy for specific material candidates like Cr2O2 under various strain conditions.

Sources

Related papers