Topological spin textures in an antiferromagnetic monolayer
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Topological spin textures in an antiferromagnetic monolayer".
Mira: Here's the gist of the paper. Topological spin structures such as magnetic skyrmions are of fundamental interest and promising for various types of applications in spintronics Here, we demonstrate the stabilization of topological spin structures in an antiferromagnetic monolayer.
Kai: Experimental Observation and Spin Texture The researchers observed an antiferromagnetic spin spiral in the Mn monolayer and a collinear antiferromagnetic state in the Mn double-layer on Ta(110) using spin-polarized scanning tunneling microscopy.
Mira: Near the boundary to the double-layer half-skyrmions form in the monolayer as revealed in combination with first-principles calculations and micromagnetic simulations.
Kai: The Mn DL hosts a collinear AFM state with an easy out-of-plane magnetization axis.
Title and authors: Kai: This paper is about showing that topological spin textures in an antiferromagnetic monolayer can be stabilized using experimental techniques and theoretical modeling.
Mira: It’s interesting because skyrmions have been predicted to appear in antiferromagnetic materials, but experimentally revealing them has been really hard.
Lev: So, the core idea here is proving it's possible to stabilize these structures intrinsically in an antiferromagnet, not just by putting things together.
Kai: Exactly. They show how this stabilization happens on a specific material system: a manganese monolayer on tantalum.
The paper's summary: Mira: The summary points out that near the boundary to the double layer, they see half-skyrmions forming in the monolayer when they combine first-principles calculations with micromagnetic simulations.
Kai: That’s where things get really interesting because it links what you see in an STM image directly to the underlying magnetic structure predicted by theory.
Lev: So, the simulation part is crucial, right? Because we can't just look at a picture and know the physics without that kind of modeling to back it up.
Mira: The theoretical framework involves Density Functional Theory calculations where they first find an energy minimum for the spin spiral dispersion neglecting spin-orbit coupling.
Kai: But when they include the spin-orbit coupling, which is important in these systems, they see that the energy minima shift towards a specific spin spiral with periods of ten nanometers <ref:2512.24186#pg1>.
The paper's improvements: Lev: I see them talking about how engineering the lateral boundaries can control what forms—either trivial domain walls or a chain of skyrmions.
Mira: If the two double layer antiferromagnets are out of phase, they form one serpentine in-plane domain wall that keeps a spiral structure in the middle of the monolayer.
Kai: But if they are in phase, then pairs of half-loops connect to form elongated AFM skyrmions instead. That’s a direct engineering tool for generating something that’s hard to stabilize otherwise.
Lev: So, this suggests that controlling the boundary conditions between these layers is a key way to create these topological states, which is something we need for device design.
Conclusion: Mira: To wrap up the findings of "Topological spin textures in an antiferromagnetic monolayer," they show that by engineering the relative configuration of the two boundaries, you can generate AFM skyrmions that are otherwise difficult to stabilize.
Kai: This work really points towards how we can design these materials for spintronics because it shows a pathway to stabilizing these textures in antiferromagnets.
Lev: From an engineering standpoint, this means we can start thinking about how the edges of our films dictate the topological state, which is something that could help us prevent skyrmion annihilation when we’re trying to build devices.
Kai: Yeah, so the observation of the AFM spin spiral and the half-loop formation at those boundaries is what makes this paper significant for understanding these materials.
Mira: It gives us a much clearer picture of how Dzyaloshinskii-Moriya interaction effects influence the magnetic ground state by showing that they drive energy minima towards these ten nanometer period spin spirals <ref:2512.24186#pg1>.
Lev: For future work, I’m wondering if they can build on this by testing how those engineered boundaries actually hold up when we try to make real devices.
Kai: That seems like the natural next step, moving from the simulation and observation to actual measurable performance in a device context.
Felix Zahner, *Tim Drevelow, †Roberto Lo Conte, Roland Wiesendanger, Stefan Heinze, Kirsten von Bergmann
Institute of Nanostructure and Solid State Physics, University of Hamburg · Institute of Theoretical Physics and Astrophysics, University of Kiel · Zernike Institute for Advanced Materials, University of Groningen · Kiel Nano, Surface, and Interface Science (KiNSIS), University of Kiel
cond-mat.mtrl-sci
Submitted: 2025-12-30
Updated: 2026-10-30
Comments: 19 pages, 7 figures
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 78/100
The gist: Topological spin structures such as magnetic skyrmions are of fundamental interest and promising for various types of applications in spintronics Here…
Key concepts
- Antiferromagnetic Spin Spiral
- This is a specific magnetic texture observed in a monolayer of Manganese where spins rotate cycloidally. It is characterized by a spiral pattern that occurs within the single layer itself, distinct from simple collinear alignment. This texture is crucial for hosting topological features.
- Dzyaloshinskii-Moriya Interaction (DMI)
- The DMI is an interaction arising in magnetic systems that favors non-collinear spin arrangements. In this study, including the DMI in calculations showed that the system's lowest energy state shifted from a simple antiferromagnetic state toward a spin spiral with characteristic periods of 10 nm.
- Topological Charge (Q)
- Topological charge is a mathematical quantity used to characterize non-trivial magnetic structures like skyrmions. The study calculated this charge at boundaries, finding that specific boundary configurations lead to half-loops, which are equivalent to individual AFM skyrmions.
Terminology
Summary
Topological spin structures such as magnetic skyrmions are of fundamental interest and promising for various types of applications in spintronics Here, we demonstrate the stabilization of topological spin structures in an antiferromagnetic monolayer. p. 0 Topological spin textures in an antiferromagnetic monolayer
Felix Zahner,1, ∗ Tim Drevelow,2, † Roberto Lo Conte,3
Roland Wiesendanger,1 Stefan Heinze,2, 4 and Kirsten von Bergmann1
1
Institute of Nanostructure and Solid State Physics,
University of Hamburg, Jungiusstraße 11, 20355 Hamburg, Germany
2
Institute of Theoretical Physics and Astrophysics,
University of Kiel, Leibnizstrasse 15, 24098 Kiel, Germany
3Zernike Institute for Advanced Materials, University of Groningen, 9747 AG Groningen, The Netherlands. 4Kiel Nano, Surface, and Interface Science (KiNSIS), University of Kiel, Germany
(Dated: January 1, 2026)
Topological spin structures such as magnetic skyrmions are of fundamental interest and promising
for various types of applications in spintronics.Where the paper says it
Experimental Observation and Spin Texture
The researchers observed an antiferromagnetic spin spiral in the Mn monolayer and a collinear antiferromagnetic state in the Mn double-layer on Ta(110) using spin-polarized scanning tunneling microscopy. Near the boundary to the double-layer half-skyrmions form in the monolayer as revealed in combination with first-principles calculations and micromagnetic simulations. p. 0 Using spin-polarized scanning tunneling microscopy, we observe an antiferromagnetic
spin spiral in the Mn monolayer and a collinear antiferromagnetic state in the Mn double-layer on
Ta(110). Near the boundary to the double-layer half-skyrmions form in the monolayer as revealed
in combination with first-principles calculations and micromagnetic simulations. Using spin-polarized
scanning tunneling microscopy (SP-STM) in combination
with density functional theory (DFT) calculations and
micromagnetic simulations, we reveal the spin texture of
the Mn monolayer (ML) and Mn double-layer (DL) on
the Ta(110) surface. The Mn DL hosts a collinear AFM
state with an easy out-of-plane magnetization axis. From fielddependent measurements with soft-magnetic Fe/W-tips
we can confirm that both out-of-plane (OOP) and inplane (IP) regions are present in the Mn ML, see Supplementary Fig. Due to the high spin-orbit coupling
of Ta a significant contribution from interface-DMI can
be expected, and consequently we conclude that the spin
rotation is of cycloidal nature as depicted in Fig. Due to the high spin-orbit coupling
of Ta a significant contribution from interface-DMI can
be expected, and consequently we conclude that the spin
rotation is of cycloidal nature as depicted in Fig. 1b, similar to previous interface-DMI induced AFM spin spirals
in a Cr and Mn ML on W(110) [20–22].Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Theoretical Framework and Ground State Determination
First-principles calculations via DFT were performed to understand the magnetic ground state of the Mn ML on Ta(110). The energy minimum of the spin spiral dispersion neglecting SOC is obtained for the AFM state occurring at the N-point. p. 3 The energy minimum of the spin spiral dispersion
neglecting SOC (Fig. 5a) is obtained for the AFM state
occurring at the N-point, while the FM state (Γ point)
is energetically highest. the N point, is the energy minimum. Upon including SOC in the DFT calculations the DMI arises (see
methods) and the energy minima shift from the AFM
state towards spin spiral energy minima with periods of In the AFM state
the two layers couple antiferromagnetically. We find that
the magnetic moment in the bottom Mn layer is quite
small with about 1. We find that
the magnetic moment in the bottom Mn layer is quite
small with about 1. 01 µB, whereas it is 2. 01 µB, whereas it is 2. 73 µB in the top
Mn layer.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Micromagnetic Modeling and Topological Charge
Micromagnetic simulations were used to investigate the magnetic frustration at boundaries between the cycloidal spin spiral and the collinear AFM state. The topological charge density is computed, which can be seen in Fig. p. 7 4a), we find a winding in-plane region that separates oppositely magnetized OOP regions
(Fig. To determine the topological properties of the
system, its topological charge density
ρ(r) = 1
4π
m(r) ·
∂m(r)
∂x ×
∂m(r)
∂y
(1)
is computed, which can be seen in Fig. To determine the topological properties of the
system, its topological charge density
ρ(r) = 1
4π
m(r) ·
∂m(r)
∂x ×
∂m(r)
∂y
(1)
is computed, which can be seen in Fig. The topological charge is concentrated at the half-loops near the
boundaries to the DL, with topological charge of QΩ = R
Ω
ρ(r)dr = −
1
2
on the left boundary, and +1
2
on the
right side (Fig. 7c), as expected for half-skyrmions. However, for this configuration this results in a vanishing total charge Q =
R
ρ(r)dr = 0. However, for this configuration this results in a vanishing total charge Q =
R
ρ(r)dr = 0. In contrast, for the case of
parallel aligned FM DL regions, Fig. 7d (corresponding
to in-phase AFM DL regions, see Fig. 4b), the half-loops
on both sides hold the same topological charge of −
1
2
(see
Fig. 4b), the half-loops
on both sides hold the same topological charge of −
1
2
(see
Fig. This adds up to a total topological charge of
Q = −1, demonstrating that each closed loop is equivalent to one skyrmion in the micromagnetic simulations,
corresponding to an AFM skyrmion in the experiments.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Engineering Topological States
The relative configuration of the two boundaries allows for the formation of either topologically trivial serpentine-like domain walls or a chain of AFM skyrmions. If the two DL AFMs are out-of-phase, then the half-loops connect to form one serpentine in-plane domain wall, which retains the spiral-like structure in the middle of the ML. p. 7 When another DL is attached at the other side of the
ML film, the half-loops connect in two different ways depending on the phase relation between the two DL AFMs. If the two DL AFMs are out-of-phase, then the half-loops
connect to form one serpentine in-plane domain wall,
which retains the spiral-like structure in the middle of
the ML. In this case, the half-loops on either side possess
opposite topological charges which cancel. If the two DL
AFMs are in-phase, then pairs of half-loops connect to
from elongated AFM skyrmions. objects is arbitrary. Such an engineering of the lateral
boundaries of an AFM spin spiral material is a means to
generate AFM skyrmions, which are otherwise difficult
to stabilize.Where the paper says it
Where the paper says it
Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved AI system for topological material design can predict stable magnetic skyrmion formation in antiferromagnetic monolayer systems by analyzing lateral heterostructure configurations, as demonstrated by how
the topological state in antiferromagnetic material systems can be controlled by the configuration within a lateral heterostructure, resulting in trivial non-coplanar states or antiferromagnetic skyrmions.
-
Improved AI system for spintronics device engineering can optimize boundary conditions to prevent skyrmion annihilation, using knowledge from the paper's observation that
Engineering of film edges can also be exploited to stabilize skyrmions in zero magnetic field.
-
Improved AI system for magnetic material characterization can distinguish between different topological states by identifying specific spin textures, such as the
antiferromagnetic spin spiral
in a Mn monolayer and thecollinear antiferromagnetic state
in a Mn double-layer. -
Improved AI system for understanding Dzyaloshinskii-Moriya interaction effects can predict the emergence of cycloidal spin spirals by incorporating first-principles calculations that show that
the DMI arises (see methods) and the energy minima shift from the AFM state towards spin spiral energy minima with periods of 10 nm.
-
Improved AI system for simulating complex magnetic domain structures can generate realistic topological maps, such as those showing
half-loop formation at the DL/ML boundary,
by coupling micromagnetic simulations with atomistic magnetic moments to produce simulated SP-STM images that match experimental results. -
Improved AI system for material property prediction can determine the stability of AFM states by calculating magnetocrystalline anisotropy values via DFT, specifically noting that
the out-of-plane direction is the easy magnetization axis
for Mn ML on Ta(110).
Abstract
Topological spin structures such as magnetic skyrmions are of fundamental interest and promising for various types of applications in spintronics. Skyrmions have been predicted to emerge also in antiferromagnetic materials where they exhibit superior transport properties. They were experimentally revealed in synthetic antiferromagnets, however, still remain elusive in intrinsic atomic antiferromagnets. Here, we demonstrate how topological spin structures can be stabilized in an antiferromagnetic monolayer. Using spin-polarized scanning tunneling microscopy, we observe an antiferromagnetic spin spiral in the Mn monolayer and a collinear antiferromagnetic state in the Mn double-layer on Ta(110). Near the boundary to the double-layer spin structures equivalent to half of an antiferromagnetic skyrmion form in the monolayer as revealed in combination with first-principles calculations and micromagnetic simulations. Our simulations show how the topological state in antiferromagnetic material systems can be controlled by the configuration within a lateral heterostructure, resulting in trivial non-coplanar states or antiferromagnetic skyrmions.
Sources
Related papers
- Structural contribution to light-induced gap suppression in Ta 2 NiSe 5
- Anatomy of fast current-induced skyrmion motion in synthetic antiferromagnets
- Magnetic control of an exciton-polariton condensate in a van der Waals magnet
- High-pressure elastic properties of GeO2 polymorphs up to 120 GPa
- Decoupling Strain-Rate Sensitivity and Deformation Length Scale Effects in Neutron-Irradiated Tungsten: A Coupled Nano-Indentation, HR-EBSD and Crystal Plasticity Study
- Magnetism modulation in Co3Sn2S2 by current-assisted domain wall motion