Prospect for measurement of CP-violating parameters of B s 0 to phi gamma at the Tera Z factory
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: High Energy Physics: Experiment. The day in high-energy experiment: detectors, searches and limits.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Prospect for measurement of CP-violating parameters of B s 0 to phi gamma at the Tera Z factory".
Paper summary: Kai: Now we shift from just the general idea to what they actually found regarding the precision when operating at the Tera Z factory. They quantify how accurate we can be with B0 s to phi gamma right there.
Mira: The study shows that the relative statistical uncertainty for measuring B0 s to phi gamma could be as low as zero point one six percent, which is improved by about two orders of magnitude compared to existing measurements one <ref:2512.23992#pg1,could be as low as 0>.
Lev: That improvement is substantial, but we have to remember what those statistical uncertainties actually look like in practice. They project the statistical uncertainties are zero point zero two one for A delta phi gamma, zero point zero zero nine two for C phi gamma, and zero point zero nine six for S phi gamma one <ref:2512.23992#pg1>.
Kai: And they also detail the systematic uncertainty components. For example, the statistical uncertainty is zero point eight four one percent for A delta phi gamma plus or minus three five percent systematic one <ref:2512.23992#pg1>.
Mira: The total uncertainties obtained by adding the statistical and systematic components in quadrature are estimated to be zero point zero four one for A delta phi gamma, zero point zero one statistical plus or minus three five percent systematic for C phi gamma, and sixty-four for S phi gamma one <ref:2512.23992#pg1>.
Lev: When you look at the specific B0 s to phi gamma decay, they found that the untagged analysis simplifies the decay time probability density function to a form sensitive only to A delta phi gamma one <ref:2512.23992#pg1>.
Kai: In that untagged analysis, when we average over B0 s and B bar zero s events, C phi gamma and S phi gamma actually cancel out one <ref:2512.23992#pg1>.
Mira: That’s important because it means the untagged analysis mainly probes A delta phi gamma when you’re looking at those mixing-induced parameters one <ref:2512.23992#pg1>.
Lev: The mean fitted value for the untagged B0 s to phi gamma decay is fitted as minus zero point six six six seven, and the statistical uncertainty per fit is estimated as zero point zero two one one <ref:2512.23992#pg1>.
Kai: So it’s clear they’re focusing on isolating A delta phi gamma in that specific way, rather than trying to extract the other parameters simultaneously in a complicated way right away.
Mira: This means their primary focus for this particular measurement is really pinning down that CP-violating parameter related to mixing one <ref:2512.23992#pg1>.
Conclusion: Lev: Moving into how they extract those observables, the time-dependent analysis of the B0 s to phi gamma decay is what allows them to account for B0 s over B bar zero s mixing.
Kai: Because we have that mixing, we can use it to extract both the mixing-induced and CP-violating parameters: A delta phi gamma, C phi gamma, and S phi gamma one <ref:2512.23992#pg1>.
Mira: In untagged samples, where the initial flavor of B0 s over B bar zero s is unknown, C phi gamma and S phi gamma cancel out when you average over those events one <ref:2512.23992#pg1>.
Lev: The untagged analysis simplifies the decay time probability density function to a form that is sensitive only to A delta phi gamma one <ref:2512.23992#pg1>.
Kai: So for that specific untagged analysis, we are fitting the mean value of A delta phi gamma, which they find is negative zero point six six six seven with a statistical uncertainty per fit of zero point zero two one one <ref:2512.23992#pg1>.
Mira: This means their immediate goal in that untagged approach is to get a solid handle on the mixing-induced CP violation term one <ref:2512.23992#pg1>.
Lev: This method seems designed to isolate A delta phi gamma, which is what they have quantified as the most statistically robust measurement in this untagged sample one <ref:2512.23992#pg1>.
Kai: It sounds like they’re using the mixing itself as a tool to clean up the signal for this particular observable right there.
Institute of High Energy Physics, Chinese Academy of Sciences · University of Chinese Academy of Sciences (UCAS) · International Center of Theoretical Physics-Asia Pacific, University of Chinese Academy of Sciences (UCAS)
hep-ex
Submitted: 2025-12-30
Updated: 2026-11-17
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 89/100
The gist: b → sγ transition is a critical flavor-changing neutral current (FCNC) process that could be used to probe CP violation (CPV) and new physics (NP) The Circular ElectronPositron Collider (CEPC)…
Key concepts
- B0s -> phi gamma transition
- This is a critical flavor-changing neutral current (FCNC) process where a B meson decays into a phi meson and a photon. Studying this decay helps physicists understand how matter exhibits CP violation, which is essential for testing the Standard Model of particle physics.
- CP-violating parameters ($A ilde{ ext{Im}} ilde{ ho} ilde{ ext{Im}} ilde{ heta}$)
- These are specific quantities extracted from the time-dependent decay analysis that quantify CP violation. They describe how the decay probability changes over time and are used to search for physics beyond the Standard Model.
- Untagged analysis
- This method is used when the initial flavor of the B0s or its antiparticle is unknown. In this case, $C ilde{ ext{Im}} ilde{ ho} ilde{ ext{Im}} ilde{ heta}$ and $S ilde{ ext{Im}} ilde{ ho} ilde{ ext{Im}} ilde{ heta}$ cancel out when averaging over both B0s and Bbar0s events, simplifying the analysis to focus primarily on $A ilde{ ext{Im}} ilde{ ho} ilde{ ext{Im}} ilde{ heta}$.
Terminology
Summary
b → sγ transition is a critical flavor-changing neutral current (FCNC) process that could be used to probe CP violation (CPV) and new physics (NP) The Circular ElectronPositron Collider (CEPC) offers unique advantages for studying flavor physics, as it provides high statistics, a clean collision environment, and superior detector performance The projected statistical uncertainties for the CP-violating parameters are A∆ϕγ = −0. p. 067 ± 0.021(stat) ± 0. p. 0035(syst), Cϕγ = 0. p. 011 ± 0.0092(stat) ± 0. p. 00027(syst), and Sϕγ = 43 ± 96(stat) ± 64(syst)
Measurement Precision at Tera-Z
The study quantifies the anticipated precision for measuring B0s → ϕγ at the CEPC Z pole operation, showing that the relative statistical uncertainty could be as low as 0.16%, improved by approximately two orders of magnitude compared to existing measurements The projected statistical uncertainties are σA∆ϕγ stat = 0. p. 0021, σC = 0. p. 00092 and σS = 0. p. 00096, and the systematic uncertainties are σA∆ϕγ syst = 0. p. 0035, σC = 0. p. 0018 and σS = 64(syst) The total uncertainties obtained by adding the statistical and systematic components in quadrature are estimated to be A∆ϕγ, Cϕγ, and Sϕγ are σA∆ϕγ = 0. p. 0041, σCϕγ = 0.01(stat) ± 0. p. 0035(syst), and σSϕγ = 64(stat) ± 64(syst)
Extraction of CP-Violating Observables
The time-dependent analysis of the B0s → ϕγ decay accounts for B0s /B¯0s mixing to extract the mixing-induced and CP-violating parameters A∆ϕγ, Cϕγ and Sϕγ In untagged samples, the initial flavor of B0s /B¯0s is unknown, and Cϕγ, Sϕγ cancel out when averaging over B0s and B¯0s events The untagged analysis simplifies the decay time probability density function (PDF) to a form sensitive only to A∆ϕγ The mean fitted value for the untagged B0s → ϕγ decay is fitted A = −0.6667 and statistical uncertainty per fit is estimated as σA∆ϕγ = 0. p. 0021
Signal Selection Strategy
The event selection process utilizes kinematic features and invariant masses of ϕ and B0s candidates to distinguish the signal from backgrounds The detailed selection criteria are outlined in Table 4 To reconstruct the ϕ meson, events containing oppositely charged track pairs identified as kaons (K+K−) are selected to form ϕ candidates A cut of log10(χ2) < 1 is applied to ensure high-quality vertex fits The mass window cut of 1.01 < mK+K− < 1.07 GeV is applied to select the optimal ϕ candidates
Detector Performance Dependence
The presence of charged final-state particles makes the PID performance of the tracker crucial for the overall precision When K/π separation power is below 3σ, the expected relative statistical uncertainty stabilizes at approximately 0.16% For the baseline resolution of 17√E = 1% E⊕ 1%, and with 3σ K/π separation, the precision is 0. p. 4156% Pushing the resolution to a near-ideal state only yields a marginal further improvement to about 0. p. 0129%
Sensitivity to New Physics
The 1σ sensitivity boundaries for NP in this study are found to be A∆ϕγ 0.15, Cϕγ 0. p. 004, and Sϕγ 0. p. 0
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Enhance signal selection using Boosted decision trees (BDT) to model nonlinear correlations between multiple variables like χ2, Vϕ→KK, mK+K−, θϕγ, Eγ, PB0s and mϕγ. This allows for a finer separation between signal and background compared to cut-based methods.
-
Improve the extraction of CP-violating parameters by performing time-dependent analyses accounting for B0s /Bbar0s mixing, enabling the measurement of mixing-induced and CP-violating parameters A∆ϕγ, Cϕγ and Sϕγ. This accounts for the interference between B0s mixing and decay amplitudes.
-
Optimize detector design by establishing a correlation between anticipated precision and intrinsic resolution of the ECAL, as well as the performance of the PID system. This provides guidance for optimizing key CEPC detector subsystems based on how they affect measurement precision.
-
Increase measurement accuracy by improving K/π separation power in the tracker, as it directly influences overall precision. The paper shows that when K/π separation power reaches 3σ, the relative statistical uncertainty stabilizes at approximately 0.16%.
-
Develop a parameter scan capability to investigate New Physics contributions to complex Wilson coefficients C′NP7 and C′NP7. This allows for constraining low energy EFT operators and UV New Physics contributions based on projected sensitivity boundaries for B0s → ϕγ decays at the Tera-Z factory.
Sources
- Exploring new physics in the FCNC $B_c \to D_s \nu \bar{\nu}$ channel
- Probing third-generation New Physics with $K\to \pi \nu\bar\nu$ and $B\to K^{(*)} \nu\bar\nu$
- Test of lepton universality with $B^{0} \rightarrow K^{*0}\ell^{+}\ell^{-}$ decays
- Test of lepton flavour universality using $B^0 \to D^{*-}\tau^+\nu_{\tau}$ decays with hadronic $\tau$ channels
- Constraints on new physics from radiative $B$ decays
- Observation of B_s to phi gamma and Search for B_s to gamma gamma Decays at Belle
- Measurement of the ratio of branching fractions BR(B0 -> K*0 gamma)/BR(Bs0 -> phi gamma)
- Measurement of the ratio of branching fractions BR(B0 -> K*0 gamma)/BR(Bs0 -> phi gamma) and the direct CP asymmetry in B0 -> K*0 gamma
- Measurement of $CP$-violating and mixing-induced observables in $B_s^0 \to \phi\gamma$ decays
- Search for $B_{s}^{0}\rightarrow\gamma\gamma$ and a measurement of the branching fraction for $B_{s}^{0}\rightarrow\phi\gamma$
- CEPC Technical Design Report -- Accelerator (v2)
- The Belle II Physics Book
- Measurement of the $b$-quark production cross-section in 7 and 13 TeV $pp$ collisions
- Measurement of b-hadron fractions in 13 TeV pp collisions
- Measurement of the $B_c^-$ meson production fraction and asymmetry in 7 and 13 TeV $pp$ collisions
- Averages of $b$-hadron, $c$-hadron, and $\tau$-lepton properties as of 2018
- The QCD NLO fragmentation functions for $c$ or $\bar{b}$ quark to $B_c$ or $B_c^*$ meson and their application
- $b\to s\tau^+\tau^-$ Physics at Future $Z$ Factories
- Prospects for $B^0_{(s)}\to\pi^0\pi^0$ and $B^0_{(s)}\to\eta\eta$ modes and corresponding $CP$ asymmetries at Tera-$Z$
- Analysis of $B_s\to\phi\nu\bar{\nu}$ at CEPC
Related papers
- DrSai: an agentic AI system toward autonomous physics analysis workflows at BESIII
- CANTON- mu Proposal: A Next-Generation Muon g-2 Measurement at Sub-0.1 ppm Precision
- Search for dark photon dark matter near 1,meV using a superconducting mixer
- ANUBIS detector and its sensitivity to neutral long-lived particles
- How to scale your HEP ML models: A recipe for robust architecture comparisons at scale
- Search for the 16 O(ppp) to 13 C pi+ pi+ e+ Decay Mode in Super-Kamiokande Using Machine Learning Techniques