Model-independent ZH production cross section at FCC-ee

arXiv:2512.21290 · hep-ex · Submitted 2025-12-24 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Experiment. The day in high-energy experiment: detectors, searches and limits.

Kai: We're looking at the paper: "Model-independent ZH production cross section at FCC-ee".

Paper summary: Kai: So to recap on this paper, they are presenting prospects for measuring the model independent ZH production cross section at the FCC-ee using that recoil mass method at center of mass energies of two hundred forty GeV and three hundred sixty-five GeV > <ref:2512.21290#pg1,prospects for measuring the model independent ZH production cross section at the>

Mira: The thesis is really about doing this measurement using the muon, electron, and hadronic decay modes of the associated Z boson, where they rely mainly on the kinematics of those reconstructed Z decay products to ensure maximal independence from specific Higgs boson decay modes >

Lev: It sounds like they’re trying to isolate the production cross section itself by focusing on those kinematic constraints rather than relying heavily on knowing exactly what kind of Higgs decay you're seeing >

Kai: Yeah, and they use multivariate techniques to further enhance sensitivity in the selection process, which is how they manage to get those results out of the data later >

Mira: They also use different fitting strategies for the leptonic and hadronic final states—a maximum likelihood fit for leptons, and a two dimensional maximum likelihood fit involving both recoil mass and jet pair mass distributions for hadrons >

Lev: It's interesting how they ensure consistency across those three final states by selecting or vetoing leptons in the event selection, which makes combining them possible >

Kai: That seems like a solid workflow for a future collider experiment, setting up these different analyses to be orthogonal enough to combine later >

Mira: The overall goal is to provide the most precise expected measurement of this ZH production cross section at future lepton colliders, and they claim that the degree of model independence is shown within their achieved precision >

Lev: So for someone building the hardware, it means you need detectors that can accurately reconstruct those Z decay products because that’s what drives all this kinematic selection >

Conclusion: Kai: Looking at the title, "Model-independent ZH production cross section at FCC-ee," it’s clear they are focused on getting a fundamental quantity, the cross section of producing a Z and a Higgs boson together >

Mira: And the authors, Li et al., are tackling this by combining different final states—leptonic and hadronic—at two different energy levels for the FCC-ee to get those precise numbers >

Lev: What this means for us on the ground is that if you can achieve these uncertainties of zero point three one percent at two hundred forty GeV and zero point five two percent at three hundred sixty-five GeV, it sets a very high bar for what we need in terms of detector performance > <ref:2512.21290#pg1>

Kai: It's about proving that this measurement method works consistently across different ways the Higgs could be decaying, which validates the technique itself >

Mira: And as they tested with bias tests, they showed that for the muon final state, the selection efficiency was nearly identical across all Higgs decay modes at each step of selection >

Lev: But they noted that for the hadronic final state, those efficiencies varied significantly across different Higgs decay modes, which is a limitation they have to deal with when interpreting the results >

Kai: So in short, it’s a detailed plan for measuring one of the most important couplings involving the Higgs boson directly at an electron positron machine >

Physics Department, Brookhaven National Laboratory · Université Paris Cité, CNRS, Astroparticule et Cosmologie · Particle Physics Collaboration, Massachusetts Institute of Technology · European Organization for Nuclear Research (CERN)

hep-ex

Submitted: 2025-12-24

Updated: 2026-11-17

Comments: 25 pages, 10 figures

License: http://creativecommons.org/licenses/by/4.0/

The gist: This paper presents prospects for measuring the model-independent ZH production cross section at the FCC-ee using the recoil-mass method at center-of-mass energies of 240 GeV and 365 GeV The full…

Key concepts

Recoil-mass method
This technique involves identifying particles from the associated Z boson decay and using their kinematics to reconstruct the mass of the recoiling Higgs boson. It helps isolate the ZH signal from background processes by focusing on specific kinematic relationships between the observed particles.
Model independence
This refers to a measurement whose result is not overly dependent on specific theoretical assumptions about how the Higgs boson decays. The study validates this by showing that selection efficiencies remain consistent across different Standard Model Higgs decay modes, confirming the robustness of the cross-section value.
Leptonic final state analysis
This analysis focuses on events where one or both Z bosons decay into leptons (like electrons or muons). The signal is extracted by performing a maximum-likelihood fit on the distribution of the recoil mass derived from these identified leptons, offering a clean way to measure ZH production.
Hadronic final state analysis
This method involves analyzing events where one or both Z bosons decay into jets (hadrons). The signal is extracted using a two-dimensional maximum-likelihood fit that considers both the recoil mass and the mass of jet pairs, providing complementary information to the leptonic approach.

Terminology

Summary

This paper presents prospects for measuring the model-independent ZH production cross section at the FCC-ee using the recoil-mass method at center-of-mass energies of 240 GeV and 365 GeV The full statistical combination leads to uncertainties of 0. p. 0

Where the paper says it

ch, paus@mit. edu Abstract: This paper presents prospects for measuring the model-independent ZH production cross section at the FCC-ee using the recoil-mass method at center-of-mass energies of 240 GeV and 365 GeV.

31% at 240 GeV and 0. p. 0
Where the paper says it

ch, paus@mit. edu Abstract: This paper presents prospects for measuring the model-independent ZH production cross section at the FCC-ee using the recoil-mass method at center-of-mass energies of 240 GeV and 365 GeV.

52% at 365 GeV This study presents the first consistent and combined analysis of the leptonic and hadronic final states for a model-independent ZH cross-section measurement at a future lepton collider, using a unified workflow and covering both √s = 240 and 365 GeV It provides the most precise expected measurement of the ZH production cross section at future lepton colliders, with the degree of model independence demonstrated within the achieved precision. p. 0
Where the paper says it

This study presents the first consistent and combined analysis of the leptonic and hadronic final states for a model-independent ZH cross-section measurement at a future lepton collider, using a unified workflow and covering both √ s = 240 and 365 GeV. It provides the most precise expected measurement of the ZH production cross section at future lepton colliders, with the degree of model independence demonstrated within the achieved precision.

Analysis Strategy

The analyses follow a common strategy based on the recoil-mass method The leptons or jets from the associated Z decay are first identified, and events are then selected to suppress backgrounds (WW, ZZ, and Z/γ∗ processes) using only their kinematic properties. After the baseline selection, multivariate techniques (MVA) are employed to further enhance sensitivity. p. 4

Where the paper says it

In the leptonic final states, tight kinematic selections are possible thanks to the excellent momentum resolution, while in the hadronic final state a looser selection is adopted to minimize model dependence. After the baseline selection, multivariate techniques (MVA) are employed to further enhance sensitivity.

The leptonic final states use a maximum-likelihood fit to the recoil mass distribution, while the hadronic final state uses a two-dimensional maximum-likelihood fit to the recoil and jet-pair mass distributions. p. 4
Where the paper says it

In the leptonic final states, the signal yield and its uncertainty are extracted from a maximum-likelihood fit to the recoil mass distribution, performed in two regions of the MVA discriminator. In the hadronic final state, the larger event yields and looser selection enable a two-dimensional maximum-likelihood fit to the recoil and jet-pair mass distributions, also separated into two regions of the MVA output.

Orthogonality among the three final states is ensured by selecting or vetoing leptons in the event selection, which makes a consistent combination of the three final states possible. p. 4
Where the paper says it

In the hadronic final state, the larger event yields and looser selection enable a two-dimensional maximum-likelihood fit to the recoil and jet-pair mass distributions, also separated into two regions of the MVA output. Orthogonality among the final states is ensured by selecting or vetoing leptons in the event selection, which makes a consistent combination of the three final states possible.

Event Generation and Detector Response

The Monte Carlo samples used in this analysis were generated at √s = 240 and 365 GeV They are normalized to integrated luminosities of 10.8 and 3.12 ab−1, respectively, corresponding to the four-interaction-point layout of FCC-ee. p. 5

Where the paper says it

They are normalized to integrated luminosities of 10. 12 ab−1 , respectively, corresponding to the four-interaction-point layout of FCC-ee.

Event generation is performed with WHIZARD3 [10] interfaced to PYTHIA6 [11] for the ZH signal and for the Z/γ∗ fermion-pair, two-photon, eγ, and vector-boson-fusion backgrounds. p. 5
Where the paper says it

The interaction vertex is smeared according to realistic conditions described in the FCC Feasibility Study Report [2]. Event generation is performed with WHIZARD3 [10] interfaced to PYTHIA6 [11] for the ZH signal and for the Z/γ∗ fermion-pair, two-photon, eγ, and vector-boson-fusion backgrounds, while the diboson (WW and ZZ) samples and the t¯t samples at √ s = 365 GeV are generated with PYTHIA8 [12] standalone.

Detector simulation and response are performed with DELPHES [13], a fast simulation package that applies parameterized resolutions and efficiencies to generator-level particles to emulate a realistic detector performance. p. 6
Where the paper says it

The total dataset spans event counts from a few million for signal and rare processes to several hundred million for diboson and fermion-pair processes, with cross sections ranging from O(10−2 ) to O(10) pb. 2 Detector response Detector simulation and response are performed with DELPHES [13], a fast simulation package that applies parameterized resolutions and efficiencies to generator-level particles to emulate a realistic detector performance.

The output consists of particle-flow candidates that are directly used in the analysis. p. 6
Where the paper says it

2 Detector response Detector simulation and response are performed with DELPHES [13], a fast simulation package that applies parameterized resolutions and efficiencies to generator-level particles to emulate a realistic detector performance. The output consists of particle-flow candidates that are directly used in the analysis.

Signal Extraction

The signal extraction is further improved using multivariate techniques and a shape-based fit to signal-sensitive observables. In the leptonic analysis, nine input variables are used based on the information of the two selected leptons. p. 4

Where the paper says it

The analyses follow a common strategy based on the recoil-mass method. The leptons or jets from the associated Z decay are first identified, and events are then selected to suppress backgrounds (WW, ZZ, and Z/γ ∗ processes) using only their kinematic properties.

The resulting BDT output distributions for signal and background are shown in Fig. p. 8
Where the paper says it

The distributions are not used as direct inputs to the analysis, but are shown to verify that the clustering strategy identifies the appropriate jet multiplicity over the wide range of topologies of the hadronic final state. The bottom row shows the jet multiplicity for the inclusive signal and background processes, obtained with the inclusive kt algorithm, which ranges from two jets for the H → γγ/µµ/inv.

6 (bottom left) for the muon final state at √s = 240 GeV, demonstrating clear separation, with an area under the ROC curve (AUC) of about 0. p. 8
Where the paper says it

The distributions are not used as direct inputs to the analysis, but are shown to verify that the clustering strategy identifies the appropriate jet multiplicity over the wide range of topologies of the hadronic final state. The bottom row shows the jet multiplicity for the inclusive signal and background processes, obtained with the inclusive kt algorithm, which ranges from two jets for the H → γγ/µµ/inv.

95. For the hadronic analysis, fifteen variables are included in the BDT, among which the two W-mass variables and the thrust are the most discriminating. p. 4
Where the paper says it

In the hadronic final state, the larger event yields and looser selection enable a two-dimensional maximum-likelihood fit to the recoil and jet-pair mass distributions, also separated into two regions of the MVA output. Orthogonality among the final states is ensured by selecting or vetoing leptons in the event selection, which makes a consistent combination of the three final states possible.

Assessment of Model Independence

The degree of model independence is assessed through dedicated bias tests The selection efficiencies for various Standard Model Higgs decay modes are shown in Fig. 5 for the muon and hadronic final states at √s = 240 GeV, grouped by channels with similar event topologies. p. 3

Where the paper says it

Leptonic final states provide a clean reconstruction thanks to the excellent momentum resolution for leptons, but suffer from small branching ratios. By contrast, the hadronic final state benefits from a branching ratio roughly twenty times larger than each of the electron and muon channels, at the cost of poorer kinematic resolution, larger backgrounds, and increased ambiguity due to overlaps with Higgs boson decay products.

In the muon final state, the selection efficiency is nearly identical across all Higgs decay modes at each step of the selection, leading to a final efficiency of 74. p. 8
Where the paper says it

Unlike the leptonic case, mjj and mrecoil are here both dominated by the jet energy resolution, so no relative weighting is applied to both terms. The ratio A/B was nevertheless scanned as for the leptonic final states, and the selection efficiency and its variation across Higgs boson decay modes were found to be insensitive to it.

66% with a spread of +0. p. 5
Where the paper says it

12 ab−1 , respectively, corresponding to the four-interaction-point layout of FCC-ee. A beam energy spread of 0.

24−0.14% as shown in Fig. p. 1
Where the paper says it

8 ab−1 when summing over the four interaction points. At this energy, the Higgs boson is produced mainly through the Higgsstrahlung process (e+e − → ZH) and, to a lesser extent, via the WW fusion process (e+e − → νeν¯eH), as illustrated in Fig.

10. In contrast, the hadronic final state does not satisfy this criterion, as the observed variations in selection efficiency across Higgs decay modes significantly exceed the corresponding expected uncertainty. p. 8
Where the paper says it

Unlike the leptonic case, mjj and mrecoil are here both dominated by the jet energy resolution, so no relative weighting is applied to both terms. The ratio A/B was nevertheless scanned as for the leptonic final states, and the selection efficiency and its variation across Higgs boson decay modes were found to be insensitive to it.

Conclusion

The combined uncertainty is 0. p. 4

Where the paper says it

that enhance or suppress specific signal and background processes. Separate investigations of the leptonic [6] and hadronic [7] channels were subsequently rescaled to the latest LCF running scenario, yielding a total uncertainty of 0.

31% at √s = 240 GeV and 0. p. 0
Where the paper says it

ch, paus@mit. edu Abstract: This paper presents prospects for measuring the model-independent ZH production cross section at the FCC-ee using the recoil-mass method at center-of-mass energies of 240 GeV and 365 GeV.

52% at √s = 365 GeV The model independence of these results has been validated through conservative bias tests, applied consistently across all final states, confirming robustness at the level of the obtained precision. p. 0
Where the paper says it

Dedicated statistical tests demonstrate model independence at the level of the obtained precision. This study presents the first consistent and combined analysis of the leptonic and hadronic final states for a model-independent ZH cross-section measurement at a future lepton collider, using a unified workflow and covering both √ s = 240 and 365 GeV.

p. 0
Where the paper says it

Dedicated statistical tests demonstrate model independence at the level of the obtained precision. This study presents the first consistent and combined analysis of the leptonic and hadronic final states for a model-independent ZH cross-section measurement at a future lepton collider, using a unified workflow and covering both √ s = 240 and 365 GeV.

p. 0
Where the paper says it

Dedicated statistical tests demonstrate model independence at the level of the obtained precision. This study presents the first consistent and combined analysis of the leptonic and hadronic final states for a model-independent ZH cross-section measurement at a future lepton collider, using a unified workflow and covering both √ s = 240 and 365 GeV.

The combined uncertainty is 0.31% (0.56%) at √s = 240 GeV (365 GeV). p. 0
Where the paper says it

ch, paus@mit. edu Abstract: This paper presents prospects for measuring the model-independent ZH production cross section at the FCC-ee using the recoil-mass method at center-of-mass energies of 240 GeV and 365 GeV.

The model independence of these results has been validated through conservative bias tests, applied consistently across all final states, confirming robustness at the level of the obtained precision. The total ZH production cross section at √s = 365 GeV is 0. p. 2
Where the paper says it

Tree-level diagrams of the Higgs production processes at √ s = 240 and 365 GeV: the ZH Higgsstrahlung process (left) and the νeν¯eH fusion process (right). One of the flagship measurements of the FCC-ee Higgs physics program is the determination of the total ZH production cross section, σZH, in a model-independent manner, providing direct access to the absolute coupling gHZZ.

52%. The model independence of these results has been validated through conservative bias tests, applied consistently across all final states, confirming robustness at the level of the obtained precision.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Enhanced Model Independence Validation: The improved system can perform rigorous statistical bias tests by perturbing Standard Model Higgs boson decay mode branching ratios by a fixed amount, comparing resulting cross section shifts against quoted uncertainties to confirm robustness The resulting bias in the extracted cross section is then compared to the quoted uncertainty, and the test is considered successful if the bias remains within the quoted uncertainty.

  2. Improved Hadronic Analysis Precision: The system can utilize a two-dimensional fit in both jet pair mass and recoil mass planes, combined with BDT output regions, to achieve higher precision for hadronic final states The hadronic analysis is divided into two regions of the BDT output, with a boundary at 0.75 (0.95) at √s = 240 (365 GeV), chosen to maximize the significance.

  3. Robust Background Constraint: The system can use low-BDT-score regions as control regions in the likelihood fit to directly constrain background normalizations The low-BDT output region and the wide recoil mass range act as control regions that constrain these normalizations directly in the fit, so that their post-fit uncertainties are well below the assumed prior.

  4. Multi-Channel Consistency Check: The improved system can perform a consistent combination of three final states by ensuring orthogonality through lepton vetoes Orthogonality among the final states is ensured by selecting or vetoing leptons in the event selection, which makes a consistent combination of the three final states possible.

  5. Precision Scaling Based on Energy: The system can dynamically adjust analysis cuts and fit parameters based on center-of-mass energy to account for kinematic changes "At √s = 365 GeV, this requirement is adjusted to 50 < pll < 150 GeV to account for the larger boost of the Z boson."

Abstract

This paper presents prospects for measuring the model-independent ZH production cross section at the FCC-ee using the recoil-mass method at center-of-mass energies of 240 GeV and 365 GeV. Analyses are carried out in the muon, electron, and hadronic decay modes of the associated Z boson. The event selections rely primarily on the kinematics of the reconstructed Z decay products, ensuring maximal independence from specific Higgs boson decay modes, while multivariate techniques are employed to further enhance sensitivity. The statistical interpretation of the leptonic and hadronic final states at 240 GeV, with an integrated luminosity of 10.8 ab-1, yields relative precisions of 0.52% for the combined leptonic channels and 0.38% for the hadronic channel. Their full statistical combination leads to uncertainties of 0.31% at 240 GeV and 0.52% at 365 GeV, the latter assuming an integrated luminosity of 3.12 ab-1. Dedicated statistical tests demonstrate model independence at the level of the obtained precision. This study presents the first consistent and combined analysis of the leptonic and hadronic final states for a model-independent ZH cross-section measurement at a future lepton collider, using a unified workflow and covering both sqrt s = 240 and 365 GeV. It provides the most precise expected measurement of the ZH production cross section at future lepton colliders, with the degree of model independence demonstrated within the achieved precision.

Sources

Related papers