Curvature Potential Formulation for Thin Elastic Sheets
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Curvature Potential Formulation for Thin Elastic Sheets".
Mira: Here's the gist of the paper. Thin elastic sheets appear in systems ranging from graphene to biological membranes, where phenomena such as wrinkling, folding, and thermal fluctuations originate from geometric nonlinearities The curvature potential formulation provides a unified geometric framework that bridges the gap between weakly nonlinear plate theories and the fully nonlinear geometry of thin sheets.
Kai: The paper introduces a methodological progress via a geometric reformulation of thin-sheet elasticity based on a stress potential and a curvature potential.
Mira: This formulation preserves the structure of the classical equations while extending their validity to nonlinear, multivalued configurations, and geometrically frustrated states.
Kai: The framework provides a unified description of thin-sheet mechanics in regimes inaccessible to existing theories and opens new possibilities for the study of elastic membranes and two-dimensional materials.
Paper summary: Kai: So we're looking at this paper, "Curvature Potential Formulation for Thin Elastic Sheets". It talks about how thin elastic sheets, like graphene or biological membranes, deal with things like wrinkling and folding because of geometric nonlinearities.
Mira: That’s the big picture. They introduce a way to describe these problems using a stress potential and a curvature potential. The thesis is that this framework can handle not just weakly nonlinear plate theories but also fully nonlinear geometry and geometrically frustrated states, which are things current theories struggle with because they require small slopes or fail when deflections get large even if the strains stay small <ref:2512.03270#pg1>.
Lev: I'm thinking about what that means for us on hardware. If we try to run these models on real hardware, we have to think about how this formulation handles the full configuration description, that three dimensional field phi with its X Y and Z components <ref:2512.03270#pg3>.
Kai: Right. So they start with a kinematic description of the shape in three dimensions, defining phi as X Y and Z functions for each point u and v <ref:2512.03270#pg2>. They then penalize deviations from reference values, which gives you the standard energy functional with stretching and bending terms.
Mira: The real difficulty they point out is that the differential operator diva a bar itself depends on the unknown metric a and on a bar, making the whole system nonlinear and implicit <ref:2512.03270#pg3>. But they claim this formulation preserves the structure of classical equations while extending their validity to those nonlinear, multivalued configurations and frustrated states <ref:2512.03270#pg1>.
Lev: That’s interesting because typically when you build error correction for hardware, you need a very clear error landscape. This sounds like a much more complex energy surface to navigate <ref:2512.03270#pg3>.
Kai: Exactly. So they apply this approach to configurations with large slopes or multi-valued height functions, and the central idea is solving compatibility equations without picking an embedding phi or a height function first <ref:2512.03270#pg3>. They say when stretching and bending energies are small, any curvature tensor b that satisfies the MPC compatibility condition with Euclidean a can be expressed as the gradient of some psi function <ref:2512.03270#pg3>.
Mira: And this representation is valid as an approximation to first order in epsilon st b alpha beta equals the gradient of a bar alpha beta psi <ref:2512.03270#pg3>. This tells us it’s essentially a first-order approximation based on small deviations from the classical setup.
Lev: If we're talking about real hardware, that means we can't rely on that first-order approximation if the deflections are actually large <ref:2512.03270#pg1>. We need something robust for those large deformations.
Paper summary: Kai: But the validation seems pretty strong. They compare it with full finite element simulations of the elastic energy, and they show excellent agreement for the curvature potential approach <ref:2512.03270#pg2>. It stays accurate even under very large strains, where classical theories like FvK type theories fail <ref:2512.03270#pg1>.
Mira: They show this across three prototypical systems: a clamped compressed ribbon, a twisted ribbon, and a sliced annulus <ref:2512.03270#pg3>. They also mention that any problem previously solved in the FvK framework can be reinterpreted here without losing physical meaning for intrinsic geometric observables <ref:2512.03270#pg1>.
Lev: So, if someone is working on modeling defects or topological designs in materials, this formulation might offer a way to look at it differently, even when the geometry gets messy and non-Euclidean <ref:2512.03270#pg3>.
Kai: They also extend it immediately to sheets with non-Euclidean reference metrics a bar or finite reference curvature b bar, which includes systems shaped by growth or residual stress <ref:2512.03270#pg4>. That means it’s not just for flat, simple sheets anymore.
Mira: And they flag a limitation: solving the elastic problem on a periodic annular domain requires enforcing not only local Gauss–MCP compatibility conditions but also global, topological compatibility relations <ref:2512.03270#pg4>. That means you can't just solve piece by piece anymore; you need to consider the whole thing <ref:2512.03270#pg4>.
Lev: From an engineering point of view, that global constraint adds a massive overhead to any simulation or error correction scheme, which is something we always have to account for when designing systems like this <ref:2512.03270#pg4>.
Kai: So the paper suggests it could be useful in architected materials, growth driven morphogenesis, kirigami and origami mechanics, and even thermalized two dimensional materials <ref:2512.03270#pg4>. That’s a pretty broad range of applications.
Mira: And they mention that the analysis confirms that stretching and bending contributions are comparable in certain scalings when looking at the scaling of b <ref:2512.03270#pg4>. This suggests a delicate balance between these two types of energy terms in their model.
Lev: If those contributions are comparable, it means neither term can be ignored even when one looks small, which makes finding the minimum energy configuration much harder <ref:2512.03270#pg4>.
Kai: So, to wrap up this summary of "Curvature Potential Formulation for Thin Elastic Sheets", this paper provides a unified geometric framework that bridges weakly nonlinear plate theories and fully nonlinear geometry <ref:2512.03270#pg1>. It extends the reach of classical FvK type theories to multivalued, large slope, and non-Euclidean configurations <ref:2512.03270#pg1>.
Mira: The paper's title itself hints at this unification by proposing a specific mathematical tool—the curvature potential—to describe these complex sheet mechanics <ref:2512.03270#pg1>. It shows that you can use this potential to describe physical things like normal gradient correlations, even when the underlying geometry is complicated <ref:2512.03270#pg1>.
Paper summary: Lev: What does this mean for the hardware side? It means we have a new language to describe these complex shapes without getting immediately stuck in the limitations of just using FvK theory <ref:2512.03270#pg4>. It’s about moving beyond simple approximations when dealing with real physical phenomena <ref:2512.03270#pg4>.
Kai: So, looking at the authors—Yael Cohen, Animesh Pandey, Yafei Zhang, Cy Maor, and Michael Moshe—they are bringing together different viewpoints on this geometric elasticity stuff <ref:2512.03270#pg1>. It’s a collaborative effort to find a better way to understand these sheets <ref:2512.03270#pg1>.
Mira: And the implication is that we might be able to revisit the mechanics and statistical physics of fluctuating membranes in regimes where large geometric deflections happen alongside small strains <ref:2512.03270#pg4>. That opens up new avenues for studying these materials <ref:2512.03270#pg4>.
Lev: I just hope that when we eventually build something based on this, the computational cost isn't prohibitive, because dealing with those non-Euclidean metrics and the global compatibility conditions sounds computationally heavy <ref:2512.03270#pg4>.
Kai: Right. So we’ve seen what the paper proposes—a geometric reformulation—and why it matters for describing complex sheet mechanics <ref:2512.03270#pg1>. The next thing we need to look at is how they actually solved those hard problems, which brings us to the conclusion of this discussion.
Mira: In closing, the "Curvature Potential Formulation for Thin Elastic Sheets" provides a unified geometric framework bridging weakly nonlinear plate theories and fully nonlinear geometry <ref:2512.03270#pg1>. It extends the reach of classical FvK type theories to multivalued, large slope, and non-Euclidean configurations <ref:2512.03270#pg1>.
Lev: And the paper's name itself hints at this unification by proposing a specific mathematical tool—the curvature potential—to describe these complex sheet mechanics <ref:2512.03270#pg1>. It shows that you can use this potential to describe physical things like normal gradient correlations, even when the underlying geometry is complicated <ref:2512.03270#pg1>.
Kai: So, what's the bigger picture for us right now? It opens up new avenues for studying these materials <ref:2512.03270#pg4>. We need to see how this theoretical framework translates into actual measurable properties in a lab setting <ref:2512.03270#pg4>.
Mira: And the authors themselves flag that solving the elastic problem on a periodic annular domain requires enforcing not only local Gauss–MCP compatibility conditions but also global, topological compatibility relations <ref:2512.03270#pg4>. That means you can't just solve piece by piece anymore <ref:2512.03270#pg4>.
Lev: That global constraint adds a massive overhead to any simulation or error correction scheme, which is something we always have to account for when designing systems like this <ref:2512.03270#pg4>.
Kai: So, we’ve seen what the paper proposes—a geometric reformulation—and why it matters for describing complex sheet mechanics <ref:2512.03270#pg1>. The next thing we need to look at is how they actually solved those hard problems, which brings us to the conclusion of this discussion.
Conclusion: Kai: So we've been looking at how this paper, "Curvature Potential Formulation for Thin Elastic Sheets," tries to handle those tricky nonlinear shapes in materials like graphene or membranes.
Mira: The core idea is using this curvature potential to unify two different ways of thinking about thin sheet elasticity—the standard weak theories and the fully nonlinear geometry stuff.
Kai: It basically says you can use this single potential to describe everything from simple bending to really complex, frustrating shapes that current math struggles with.
Mira: They show that even when the stretching and bending energies are small, this approach lets you describe things like normal gradient correlations in a way that keeps their classical structure intact.
Kai: And the authors test it out on some specific examples—like a twisted ribbon or a sliced annulus—and they say it works well compared to full computer simulations.
Mira: They also point out that any problem you could solve with the old framework can be looked at again here without losing the real physical meaning of what you're measuring.
Kai: This suggests we might get a new way to look at how these membranes behave when they're stretched a lot, even if the strain itself is small.
Mira: It opens up possibilities for studying those fluctuating 2D materials in conditions where big geometric bends happen alongside small strains <ref:2512.03270#pg1>.
Kai: But there are some caveats too, like needing global topological constraints when you're dealing with periodic surfaces.
Mira: That means the math isn't just local anymore; it has to account for the entire shape at once when you look at things like an annulus.
Kai: So, this formulation is a tool that bridges old theories and new geometry, showing its power in handling those hard configurations.
Mira: It’s definitely a framework worth looking into for how we describe the mechanics of architected materials or even growing biological tissues.
Racah Institute of Physics, The Hebrew University of Jerusalem · Engineering Mechanics Unit, Jawaharlal Nehru Center for Advanced Scientific Research, Bengaluru, India · Einstein Institute of Mathematics, The Hebrew University of Jerusalem
cond-mat.soft, cond-mat.mtrl-sci, math-ph, math.MP
Submitted: 2025-12-02
Updated: 2026-11-04
Journal ref: Physical Review Letters, 137:188201, 2026
DOI: 10.1103/kmfj-zd9v
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 75/100
The gist: Thin elastic sheets appear in systems ranging from graphene to biological membranes, where phenomena such as wrinkling, folding…
Key concepts
- Curvature Potential Formulation
- This is a unified geometric method that uses a stress potential and a curvature potential to describe thin elastic sheets. It bridges the gap between simple nonlinear plate theories and complex, fully nonlinear geometries, providing a single mathematical structure for analyzing sheet mechanics.
- Geometric Nonlinearities
- These are the physical phenomena—such as wrinkling, folding, and thermal fluctuations—that arise because the geometry of thin elastic sheets is inherently nonlinear. The formulation treats these geometric effects directly by penalizing deviations from reference configurations through potentials.
- FvK Type Theories
- These are classical theories used to describe thin-sheet mechanics, often relying on a height function. The new curvature potential approach shows that problems previously solved with FvK can be reinterpreted within this new framework without losing physical meaning for intrinsic geometric observables.
Terminology
Summary
Thin elastic sheets appear in systems ranging from graphene to biological membranes, where phenomena such as wrinkling, folding, and thermal fluctuations originate from geometric nonlinearities The curvature potential formulation provides a unified geometric framework that bridges the gap between weakly nonlinear plate theories and the fully nonlinear geometry of thin sheets. p. 0
Introduction to the Formulation
The paper introduces a methodological progress via a geometric reformulation of thin-sheet elasticity based on a stress potential and a curvature potential. This formulation preserves the structure of the classical equations while extending their validity to nonlinear, multivalued configurations, and geometrically frustrated states. p. 0 The framework provides a unified description of thin-sheet mechanics in regimes inaccessible to existing theories and opens new possibilities for the study of elastic membranes and two-dimensional materials. p. 0
Theoretical Framework
The theoretical framework starts with the kinematic description of the configuration in 3D, defined by ϕ(u, v) = X(u, v), Y (u, v), Z(u, v). The elastic energy penalizes deviations of these fields from their reference values (¯a, ¯b), leading to the standard functional with stretching and bending terms. p. 1 The equilibrium equations can be obtained either by minimizing the functional (1) with respect to the embedding ϕ(u, v), or by assuming a simplyconnected elastic body and constraining minimization with respect to the fields a and b subject to (2). p. 1 A key difficulty is that the differential operator diva,a ¯ itself depends on the unknown metric a and on ¯a, making the system nonlinear and implicit. p. 1
Application to Configurations
The approach applies seamlessly to configurations with large slopes or multi-valued height functions, as presented in Fig. 1(a-c). The central idea underlying the approach is to solve the compatibility equations without specifying an embedding ϕ or a height function. p. 1 When stretching and bending energies remain small, any curvature tensor b that satisfies the MPC compatibility condition in Eq. p. 1 (2) with Euclidean a can be expressed as bαβ = ∇αβψ. p. 1 This representation is valid as an approximation to first order in ϵstbαβ = ∇¯a αβψ. p. 1
Results and Validation
Comparison with full finite-element simulations of the elastic energy (1) shows excellent agreement for the curvature potential approach. The framework remains accurate even under very large strains, in regimes where classical FvK type theories fail. p. 3 The paper illustrates this through three prototypical systems: a clamped compressed ribbon, a twisted ribbon, and a sliced annulus. p. 2
Conceptual Implications
A key conceptual implication is that any problem previously solved within the FvK framework can be reinterpreted within the potential formulation without loss of physical meaning for intrinsic geometric observables. Quantities that depend on the curvature tensor, such as normal gradient correlations, retain their classical structure regardless of whether b is expressed in terms of a shallow height function or a curvature potential. p. 3 This opens the possibility for revisiting the mechanics and statistical physics of fluctuating membranes in regimes where large geometric deflections coexist with small strains. p. 3
Future Directions
The formulation extends immediately to sheets with non-Euclidean reference metrics ¯a or finite reference curvature ¯b, including systems shaped by growth, plastic deformation, residual stress, or programmed geometry. The paper notes that solving the elastic problem on a periodic annular domain requires enforcing not only local Gauss–MCP compatibility conditions but also global, topological compatibility relations. p. 3 This will allow for addressing the problem of a dislocated annulus and offering new insight into the finite energy hypothesis for dislocations. p. 3 The framework is expected to find broad application in architected materials, growth driven morphogenesis, kirigami and origami mechanics, and thermalized two dimensional materials. p. 4
Appendix Details
Appendix A details the numerical methods used to determine energy minimizing configurations of elastic sheets prescribed by a reference metric ¯a and reference curvature ¯b. Appendix D discusses the isometric limit where h → 0, leading to an equation for B∆¯ ∆¯ ψ derived from variation of the curvature potential. p. 9 Appendix E derives solutions for the twisted ribbon under specific assumptions about the geometry and boundary conditions. p. 9 Appendix G examines a bent sliced annulus by considering bending potentials that allow curvature only on the azimuthal direction. p. 0 The analysis confirms that stretching and bending contributions are comparable in certain scalings, as indicated by the scaling of b. p. 8 p. 8
Summary of Key Findings
The curvature potential formulation proves to be a unified geometric framework bridging weakly nonlinear plate theories and fully nonlinear geometry. It extends the reach of classical FvK type theories to multivalued, large slope, and non-Euclidean configurations. p. 4 The approach preserves the structure of previous frameworks while extending their reach to complex geometries and geometric frustration. p. 0 The formulation is derived directly from the geometric elastic energy, allowing it to be applied immediately to sheets with non-Euclidean reference metrics or finite reference curvature. p. 3 Comparison with full finite element simulations validates that this approach remains accurate even under very large strains, where classical theories break down. p. 3 The framework offers a unified description of thin-sheet mechanics in regimes inaccessible to existing theories. p. 0 The formulation is expected to find broad application in architected materials, growth driven morphogenesis, kirigami and origami mechanics, and thermalized two dimensional materials. p. 4
References
[1] W. Van Saarloos, V. p. 4 p. 4 Vitelli, and Z. p. 4 p. 4 Zeravcic, Soft Matter: Concepts, Phenomena, and Applications (Princeton University Press, 2024)
[2] D. R. Nelson, Defects and geometry in condensed matter physics (Cambridge University Press, 2002)
[3] P. M. Chaikin, T. p. 4 p. 4 C. Lubensky, and T. p. 4 p. 4 A. Witten, Principles of condensed matter physics, Vol. p. 4 p. 4 10 (Cambridge university press Cambridge, 1995)
[4] N. Levy, S. Burke, K. Meaker, M. Panlasigui, A. p. 4 p. 4 Zettl, F. Guinea, A. C. Neto, and M. p. 4 p. 4 F. Crommie, Straininduced pseudo–magnetic fields greater than 300 tesla in graphene nanobubbles (2010)
[5] S. Zhu, J. A. Stroscio, and T. p. 4 Li, Programmable extreme pseudomagnetic fields in graphene by a uniaxial stretch (2015)
[6] E. Sharon, M. Marder, and H. p. 4 L. Swinney, Leaves, flowers and garbage bags: Making waves (2004)
[7] Y. Zhang, O. Y. Cohen, M. Moshe, and E. p. 4 Sharon, Geometrically frustrated rose petals (2025)
[8] S. Armon, E. Efrati, R. Kupferman, and E. p. 4 Sharon, Geometry and mechanics in the opening of chiral seed pods (2011)
[9] N. Murisic, V. p. 4 Hakim, I. G. Kevrekidis, S. p. 4 Y. Shvartsman, and B. p. 4 Audoly, From discrete to continuum models of three-dimensional deformations in epithelial sheets (2015)
[10] J. Dervaux and M. p. 4 Ben Amar, Morphogenesis of growing soft tissues (2008)
[11] L. D. Landau, L. Pitaevskii, A. p. 4 M. Kosevich, and E. p. 4 M. Lifshitz, Theory of elasticity: volume 7 (Elsevier, 2012)
[12] E. Efrati, E. Sharon, and R. p. 4 p. 4 Kupferman, Elastic theory of unconstrained non-euclidean plates (2009)
[13] M. Lewicka, L. p. 4 Mahadevan, and M. p. 4 R. Pakzad, The f¨oppl-von k´arm´an equations for plates with (2010)
[14] P. Ciarletta, G. p. 4 Pozzi, and D. p. 4 Riccobelli, The f¨oppl–von k´arm´an equations of elastic plates with initial stress (2022)
[15] D. Nelson, T. Piran, and S. p. 4 Weinberg, The statistical mechanics of membranes and interfaces (1989)
[16] A. Pacheco-Sanju´an and R. p. 4 Batra, Accuracy of f¨oppl–von k´arm´an membrane theory for determining elastic constants of monolayer graphene (2019)
[17] A. Koˇsmrlj and D. p. 4 p. 4 p. 4 R. Nelson, Response of thermalized ribbons to pulling and bending (2016)
[18] P. Le Doussal and L. p. 4 Radzihovsky, Anomalous elasticity, fluctuations and disorder in elastic membranes (2018)
[19] D. R. Nelson, Defects in flexible membranes with crystalline order (1988)
[20] T. Zhang, X. Li, and H. Gao, Defects controlled wrinkling and topological design in graphene (2014)
[21] K. Guo, M. Su˜n´e, M. L. Kwok, K. J. Hsia, M. Liu, and D. p. 4 Vella, Localized tension–induced giant folding in unstructured elastic sheets (2025)
[22] M. Leembruggen, J. p. 4 Andrejevic, A. p. 4 Kudrolli, and C. p. 4 H. Rycroft, Computational model of twisted elastic ribbons (2023)
[23] J. Chopin, V. D´emery, and B. p. 4 Davidovitch, Roadmap to the morphological instabilities of a stretched twisted ribbon (2015)
[24] E. Cerda and L. p. 4 p. 4 Mahadevan, Conical surfaces and crescent singularities in crumpled sheets (1998)
[25] E. Cerda and L. Mahadevan, Geometry and physics of wrinkling (2003)
[26] H. Liang and L. p. 4 Mahadevan, The shape of a long leaf (2009)
[27] S. Sadik and M. p. 4 A. Dias, On local kirigami mechanics i: Isometric conical solutions (2021)
[28] M. Moshe, E. Sharon, and R. Kupferman, The plane stress state of residually stressed bodies: A stress function approach (2014)
[29] M. P. do Carmo, Differential Geometry of Curves and Surfaces (Prentice-Hall, Englewood Cliffs, NJ, 1976)
[30] B. Audoly and Y. p. 4 Pomeau, Finite amplitude buckling of a strip (Oxford University Press, Oxford, 2010) Chap. p. 4 8 (2010)
[31] A. Koˇsmrlj and D. R. Nelson, Response of thermalized ribbons to pulling and bending (2016)
[32] P. Z. Hanakata, S. p. 4 S. Bhabesh, M. p. 4 J. Bowick, D. R. Nelson, and D. p. 4 Yllanes, Thermal buckling and symmetry breaking in thin ribbons under compression (2021)
[33] M. M¨uller, M. p. 4 B. Amar, and J. p. 4 Guven, Conical defects in growing sheets (2008)
[34] E. Efrati, L. Pocivavsek, R. p. 4 Meza, K. Y. C. Lee, and T. p. 4 A. Witten, Confined disclinations: Exterior versus material constraints in developable thin elastic sheets (2015)
[35] M. Moshe, E. Esposito, S. p. 4 Shankar, B. p. 4 Bircan, I. Cohen, D. R. Nelson, and M. p. 4 J. Bowick, Nonlinear mechanics of thin frames (2019)
[36] K. A. Seffen, Fundamental conical defects: The d-cone, its e-cone, and its p-cone (2016)
[37] R. Kupferman, Bending energy of buckled edge disloca- (2017)
[38] R. Kupferman, C. p. 4 Maor, and D. p. 0 Padilla-Garza, The willmore energy and curvature concentration (2025)
[39] A. Koˇsmrlj and D. R. Nelson, Mechanical properties of warped membranes (2013)
Appendix A details the numerical methods used to determine energy minimizing configurations of elastic sheets prescribed by a reference metric ¯a and reference curvature ¯b. Appendix B provides the complete form of the equilibrium equations as in [12], defining stress, bending moment, and total stress Σ. p. 7 Appendix C discusses boundary conditions, showing how the transition from classical FvK height function f to the curvature potential ψ causes difficulties regarding boundary conditions. p. 8 Appendix D explores the isometric limit where h → 0, deriving a bulk equation for ψ via variation of the curvature potential. p. 9 Appendix E derives solutions for the twisted ribbon under specific assumptions about geometry and boundary conditions. p. 9 Appendix F provides general solutions for a compressed ribbon in both FvK and isometric limits. p. 9 Appendix G considers a bent sliced annulus by examining bending potentials that allow curvature only on the azimuthal direction. p. 0 The analysis confirms that stretching and bending contributions are comparable in certain scalings, as indicated by the scaling of b. The paper's summary concludes that this formulation provides a unified geometric framework bridging weakly nonlinear plate theories and fully nonlinear geometry. It is expected to find broad application in architected materials, growth driven morphogenesis, kirigami and origami mechanics, and thermalized two dimensional materials. p. 4 This formulation is expected to serve as a foundation for further developments in geometric elasticity. p. 4
[1] W. Van Saarloos, V. Vitelli, and Z. Zeravcic, Soft Matter: Concepts, Phenomena, and Applications (Princeton University Press, 2024)
[2] D. R. Nelson, Defects and geometry in condensed matter physics (Cambridge University Press, 2002)
[3] P. M. Chaikin, T. C. Lubensky, and T. A. Witten, Principles of condensed matter physics, Vol. 10 (Cambridge university press Cambridge, 1995)
[4] N. Levy, S. Burke, K. Meaker, M. Panlasigui, A. Zettl, F. Guinea, A. C. Neto, and M. F. Crommie (2010)
[5] S Zhu, J A Stroscio and T Li (2015)
[6] E Sharon, M Marder and H L Swinney (2004)
[7] Y Zhang, O Y Cohen, M Moshe and E Sharon (2025)
[8] S Armon, E Efrati R Kupferman and E Sharon (2011)
[9] N Murisic, V Hakim I Kevrekidis S Shvartsman and B Audoly (2015)
[10] J Dervaux and M Ben Amar (2008)
[11] L D Landau, L Pitaevskii A M Kosevich and E M Lifshitz (Elsevier, 2012)
[12] E Efrati, E Sharon and R Kupferman (2009)
[13] M Lewicka L Mahadevan and M R Pakzad (2010)
[14] P Ciarletta G Pozzi and D Riccobelli (2022)
[15] D Nelson, T Piran and S Weinberg (1989)
[16] A Pacheco-Sanju´an and R Batra (2019)
[17] A Koˇsmrlj and D R Nelson (2016)
[18] P Le Doussal and L Radzihovsky (2018)
[19] D R Nelson (1988)
[20] T Zhang, X Li and H Gao (2014)
[21] K Guo, M Su˜n´e M L Kwok K J Hsia M Liu and D Vella (2025)
[22] M Leembruggen J Andrejevic A Kudrolli and C H Rycroft (2023)
[23] J Chopin V D´emery and B Davidovitch (Journal of Elasticity 119, 137)
[24] E Cerda and L Mahadevan (1998)
[25] E Cerda and L Mahadevan (2003)
[26] H Liang and L Mahadevan (2009)
[30] B Audoly and Y Pomeau (Oxford University Press, Oxford, 2010) Chap.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved AI systems can analyze thin sheet mechanics in regimes inaccessible to existing theories by using a geometric reformulation based on a stress potential and a curvature potential. This allows for
a unified description of thin-sheet mechanics in regimes inaccessible to existing theories
and extending validity beyond small slopes or height functions. -
The improved system can accurately model configurations with large slopes or multi-valued height functions by solving equilibrium equations in terms of these potentials, as shown by the text:
the curvature potential formulation remains accurate even beyond 70% strain.
-
The AI system can perform statistical physics of elastic membranes with large deformations and open problems in mechanics by utilizing the framework to reinterpret previously solved problems within the potential formulation, such that
quantities that depend on the curvature tensor, such as normal gradient correlations, retain their classical structure.
-
The system can handle non-Euclidean reference metrics and finite reference curvature by extending the formulation immediately to
sheets with non Euclidean reference metrics ¯a or finite reference curvature ¯b,
including systems shaped bygrowth, plastic deformation, residual stress, or programmed geometry.
-
The AI can solve complex boundary value problems for thin sheets using an explicit example of how to do so, such as finding the shape of a compressed ribbon by solving the ODE derived from the Weingarten equations.
Sources
- The plane stress state of residually stressed bodies: a stress function approach
- The Willmore energy and curvature concentration
Related papers
- Coarse-graining dense, deformable active particles
- Three-body corrections to the Brownian viscosity of hard spheres without hydrodynamic interactions
- Thin active nematohydrodynamic layers: asymptotic theories and instabilities
- Origins of suppressed self-diffusion of nanoscale constituents of a complex liquid
- Soft material mechanical property degradation at high strain rates
- Avalanche criticality emerges by thermal fluctuation in a quiescent glass