Self-induced marginality in plastically deformed crystals

arXiv:2511.08187 · cond-mat.mtrl-sci, cond-mat.mes-hall, nlin.PS · Submitted 2025-11-11 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: We're looking at the paper: "Self-induced marginality in plastically deformed crystals".

Mira: Here's the gist of the paper. Quasi-brittle plastic yielding is a salient feature of well-annealed glassy materials Here we show that the same behavior is characteristic of perfect crystals after they experience mechanically driven elastic instability leading to massive nucleation of dislocations We argue that such ’preparation’ effectively converts an atomic configuration from crystalline to quasi-amorphous To understand the nature of the subsequent intermittent mechanical response we study a model 2D crystal subjected to AQS driving and show that both pre- and post-yield dislocation avalanches exhibit power law statistics with similar exponents indicative of self-induced marginal stability.

Kai: Preparation and Conceptual Link The paper investigates the complexity of plastic response in strain-driven crystalline solids by studying a 2D square crystal subjected to athermal quasistatic (AQS) proportional loading by shear strain along one of the slip directions.

Mira: They argue that preparing a ’generic’ crystal involves shearing it to the point of mechanical instability, which is resolved through massive dislocation nucleation, effectively converting the atomic configuration from crystalline to quasi-amorphous.

Kai: This term refers to a solid that is structurally crystalline but mechanically amorphous in the sense that its mechanical response is dominated by non-affine relaxations.

Title and authors: Mira: Let’s talk about the paper Self-induced marginality in plastically deformed crystals by O.U. Salman, A. Ahadi, and L. Truskinovsky, since the title itself points toward a concept called self-induced marginality which they connect to this plastic yielding behavior of perfect crystals.

Kai: Yeah, and what this means in plain terms is that they are showing that when you mechanically stress a perfect crystal hard enough to cause massive dislocation nucleation, you create a state that behaves like an amorphous solid.

Lev: So the core idea seems to be that the initial mechanical instability leads to this self-generated disorder, which then dictates the subsequent intermittent mechanical response, and we see power law statistics in both pre-yield and post-yield dislocation avalanches with matching exponents.

Kai: Right. They are essentially arguing that this preparation process is what sets up the system for this unique statistical behavior, linking it to self induced marginal stability.

Mira: And they use a novel mesoscopic tensorial model, which is their main tool, to capture the interplay between continuum and atomic descriptions without needing any specific phenomenological assumptions about how dislocations move.

The paper's summary: Kai: So they summarize this by focusing on how the complexity of plastic response in strain driven crystalline solids is revealed through intermittent stress fluctuations accompanied by scale free spatiotemporal patterns.

Mira: They detail a process where you start with a crystal, you shear it to mechanical instability, which resolves itself via massive dislocation nucleation, effectively transforming it into a quasi-amorphous configuration.

Lev: Then they look at the subsequent flow: this quasi-amorphous crystal has a hardening stage with small localized rearrangements that ends abruptly in a quasi brittle yield leading to multi grain pattern dominated by global shear bands.

Kai: And what they find is that after this yield, the post yield plastic flow is characterized by a stress plateau with fluctuations representing broadly distributed dislocation avalanches.

Mira: The key result they highlight is that for these generic quasi-amorphous crystals, the statistics of avalanches follow the same pattern as for their amorphous counterparts, meaning the scaling behavior remains basically unchanged across that quasi brittle yielding transition.

The paper's improvements: Lev: What do I see as an improvement here is their mesoscopic tensorial model which allows them to capture topological restructuring during dislocation nucleation without relying on specialized phenomenological assumptions, which is hard to get in continuum mechanics.

Kai: And it helps them resolve the connectivity aspect of the dislocation nucleation and annihilation, which is what you need when you're trying to understand how that initial instability actually happens at an atomic level.

Mira: They also suggest that by modeling this as a system with infinitely many equivalent energy wells, characterized by a Landau type model, they can capture the geometric nature of the nonlinearity stemming from the exact description of finite elastic deformations.

Lev: That infinite well landscape is interesting because it suggests that the marginal stability isn't just a local issue but stems from a more fundamental geometrical property of the system's energy landscape itself.

Conclusion: Kai: So to wrap up, O.U. Salman, A. Ahadi, and L. Truskinovsky show that mechanically driven perfect crystals can exhibit quasi brittle plastic yielding remarkably similar to well-annealed glassy materials because they acquire self generated disorder from massive dislocation nucleation during the breakdown of an affine elastic configuration.

Mira: And the parallel features are these pre and post yield avalanches have power law statistics with matching exponents that point towards the marginal stability of the associated mechanical system.

Lev: For real hardware, this suggests that once you reach this instability, you get collective behavior in the post yield regime, which is a big deal for how we design robust systems.

Kai: Yeah, and they show the transition from localized rearrangements before yield to highly correlated system spanning structures after yield reflected by fractal dimensions going from approximately zero point three six in pre-yield to approximately zero point nine eight in post-yield <ref:2511.08187#pg1>.

Mira: It’s a nice way to summarize how the study of Self induced marginality in plastically deformed crystals connects the hierarchical organization of energy wells to intermittent scale free responses.

O.U. Salman, A. Ahadi, L. Truskinovsky

LSPM, CNRS UPR3407, Universite Sorbonne Paris Nord · Lund University Department of Mechanical Engineering Sciences · PMMH, CNRS UMR 7636 ESPCI PSL

cond-mat.mtrl-sci, cond-mat.mes-hall, nlin.PS

Submitted: 2025-11-11

Updated: 2026-03-19

DOI: 10.1103/3rwf-d3yx

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 86/100

The gist: Quasi-brittle plastic yielding is a salient feature of well-annealed glassy materials Here we show that the same behavior is characteristic of perfect crystals after they experience mechanically…

Key concepts

Quasi-amorphous Crystal
This describes a crystal that is structurally ordered but mechanically behaves like an amorphous solid. This state is achieved when the crystal undergoes mechanical instability, leading to the massive nucleation of dislocations. The resulting material's response is dominated by non-affine relaxations rather than perfect crystalline structure.
Mesoscopic Tensorial Model (MTM)
This novel model bridges the gap between continuum and atomic descriptions of crystal plasticity. It captures how dislocations nucleate and annihilate by associating energy landscapes with material points, allowing for the resolution of topological changes without needing specific phenomenological assumptions about dislocation behavior.
Self-induced Marginality
This refers to a system's proximity to mechanical instability where the disorder it generates itself (via dislocation nucleation) dictates its mechanical response. The power-law statistics and matching exponents observed across different regimes indicate that this marginal stability is a universal feature, linking the behavior of crystals to spin glass theory.

Terminology

Summary

Quasi-brittle plastic yielding is a salient feature of well-annealed glassy materials Here we show that the same behavior is characteristic of perfect crystals after they experience mechanically driven elastic instability leading to massive nucleation of dislocations We argue that such ’preparation’ effectively converts an atomic configuration from crystalline to quasi-amorphous To understand the nature of the subsequent intermittent mechanical response we study a model 2D crystal subjected to AQS driving and show that both pre- and post-yield dislocation avalanches exhibit power law statistics with similar exponents indicative of self-induced marginal stability. p. 0

Preparation and Conceptual Link

The paper investigates the complexity of plastic response in strain-driven crystalline solids by studying a 2D square crystal subjected to athermal quasistatic (AQS) proportional loading by shear strain along one of the slip directions. They argue that preparing a ’generic’ crystal involves shearing it to the point of mechanical instability, which is resolved through massive dislocation nucleation, effectively converting the atomic configuration from crystalline to quasi-amorphous. p. 0 This term refers to a solid that is structurally crystalline but mechanically amorphous in the sense that its mechanical response is dominated by non-affine relaxations. p. 0 Plastic flow of such quasi-amorphous crystals begins with a hardening stage involving small spatially localized dislocation rearrangements, which is terminated abruptly with a quasi-brittle yield leading to the formation of multi-grain pattern dominated by global shear bands. p. 0

Modeling and Theoretical Framework

The main tool employed is a novel mesoscopic tensorial model (MTM) of crystal plasticity that represents a conceptual tradeoff between continuum and atomic descriptions. The MTM allows one to capture the intermittent nature of dislocation avalanches while resolving topological (connectivity) restructuring involved in nucleation and annihilation of dislocations without any specialized phenomenological assumptions. p. 0 The model associates with material points an effective energy landscape whose tensorial periodicity accounts for crystallographically-invariant deformations, resulting in a Landau-type model characterized by infinitely many equivalent energy wells. p. 0 The small scale regularization is achieved by mesoscopic discretization, where the linear scale of an individual finite element becomes a physical parameter. p. 1

Mechanical Response Regimes

The mechanical response is characterized by distinct regimes following the yield event.

This ’microplasticity’ regime is terminated abruptly with a quasi-brittle yield leading to the formation of multi-grain pattern dominated by global shear bands.

The post-yield plastic flow is characterized by a stress plateau with superimposed fluctuations representing broadly distributed dislocation avalanches.

Statistical Signatures and Universality

The study focuses on the statistical structure of plastic fluctuations, where observables include the energy dissipated at a single avalanche ∆W and the corresponding macroscopic stress drop ∆Σ = A∆σxy. The probability distribution of these observables is compatible with the finite-size scaling ansatz P(s;L) = s-x F(s/LDx). p. 2 The results show that for ’generic’ quasi-amorphous crystals, the statistics of avalanches follow the same pattern as for their amorphous counterparts. p. 3 Specifically, similar to well-annealed glasses, the scaling behavior remains basically unchanged across the quasi-brittle yielding transition. p. 3 The power-law exponent ϵ ≈ 1. p. 20 is a signature of an archetypically ’wild’ crystal plasticity and has been shown to be related to the marginal stability of the system. p. 3

Morphological Evolution

The spatial organization of plastic events changes drastically across the yield transition.

In the pre-yield microplasticity regime we see individual avalanches represented by highly localized, spatially scattered, microscopically isolated rearrangements.

Instead, in the post-yield regime such seemingly non connected plastification zones are replaced by highly correlated, system-spanning macroscopic structures...

Conclusion on Universality

The observed general agreement in the values of the computed exponents suggests that the researchers are dealing with the same universality class. The similarity between amorphous and crystalline solids is supported by elasto-plastic models being very similar to the MTM, differing only in how phenomenological yield thresholds are replaced by elastic instabilities originating from the non-convexity of the energy landscape. p. 4 The paper concludes that mechanically driven perfect crystals can exhibit quasi-brittle plastic yielding remarkably similar to well-annealed glassy materials. p. 4

Pruning redundant reasoning tokens

The authors demonstrate that the implied marginality is not affected by the quasi-brittle yield, which apparently does not compromise the global organization of the energy landscape while, of course, affecting the reachability of its different subdomains. The emergence of collective behavior in post-yield suggests that plastic yield implies access to a much broader repertoire of relaxation mechanisms. p. 2 The fractal dimension Dϵ changes from ≈ 0. p. 236 in the pre-yield regime to ≈ 0. p. 198 in the post-yield regime, reflecting a transition from localized rearrangements to system-spanning shear bands. p. 0

How the training signal is built

The scaling exponents are determined using a robust data-collapse optimization procedure that rescales the axes to collapse distributions from all system sizes onto a single master curve. The quality of this collapse is quantified by computing the average variance across a subset of grid points, which provides a highly sensitive measure of how well the distributions coincide. This method allows for the determination of optimal scaling exponents (x∗, D∗x) and their associated geometric 1-σ uncertainties. p. 3

Where the gains come from

The key finding is that pre-yield and post-yield energy distributions share almost the same value of the exponent ϵ = 1.0, suggesting that while spatial organization changes drastically, the statistical distribution of energy drops remains insensitive to these details. p. 3 The difference in exponents τ between regimes suggests that in the post-yield regime, individual avalanches are no longer hindered by local structural constraints. p. 4 This shift implies that the stress drop is only constrained by the corresponding strain increment due to the constraints of (nonlinear) elasticity. p. 4 The pre-yield regime shows a scaling where dissipated energies and stress drops are roughly proportional, suggesting a highly constrained regime of dislocation motion. p. 3

Finite Size Scaling and Data Collapse

The analysis utilizes the finite-size scaling ansatz to confirm the reliability of the extracted exponents through excellent visual overlap in scaled probability distributions across different system sizes. The deep, well-defined global minima in the variance surfaces allow for choosing optimal scaling exponents and determining their associated geometric 1-σ uncertainties. The collapse quality map clearly distinguishes the pre-yield and post-yield regimes based on these optimized parameters. p. 2 This empirical validation confirms that the scaling behavior is universal across the quasi-brittle yielding transition. p. 3

Spatial Patterns

The transition in structural topology involves a change from almost 0D avalanches (isolated clusters) in the pre-yield microplasticity regime to almost 1D avalanches (extended anisotropic bands) in the post-yield regime. The typical avalanches in the post-yield regime involve broadening of shear bands and may include correlated restructuring of grain boundaries whose total length is comparable with linear size of the system. p. 0 This qualitative picture aligns with the extracted fractal dimensions, indicating a transition from localized to collective plastic deformation. p. 3

Final Synthesis

The paper successfully showed that mechanically driven perfect crystals can exhibit quasi-brittle plastic yielding similar to well-annealed glassy materials. The parallel features of the mechanical response emerge after pristine crystals acquire self-generated disorder resulting from massive dislocation nucleation during the breakdown of an affine elastic configuration. p. 4 p. 4 The ensuing quasi-amorphous crystals exhibit pre- and post-yield avalanches with power law statistics whose matching exponents are indicative of the marginality of the associated mechanical system. p. 4 p. 4 Adaptation of the same model to realistic 3D crystals will allow one to distinguish between edge and screw dislocations opening the way to the adequate account of such physically important effects as dislocation climb, cross slip and forest hardening. p. 4 The analysis should be performed with the account of the effects of finite temperature. p. 4

The similarity between amorphous and crystalline solids is supported by elasto-plastic models being very similar to the MTM, differing only in how phenomenological yield thresholds are replaced by elastic instabilities originating from the non-convexity of the energy landscape. The crucial nonlinearity in the MTM is of universal geometrical nature as it originates from the exact description of finite elastic deformations. p. 4 The authors confirm that they are dealing with the same universality class based on the general agreement in computed exponents. p. 4 The marginal stability of the system is interpreted as a signature of spin glass theory, where hierarchical organization of energy wells results in an intermittent, scale-free response. p. 3 The proximity to unstable modes leads to the mixing of statics and dynamics, making the mechanical response inherently intermittent. p. 3 The self-generated disorder brought the system from a solid to an effectively glassy state. p. 3 The implied marginality is not affected by the quasi-brittle yield, which does not compromise the global organization of the energy landscape. p. 3

The numerical method involves solving an elastic finite element problem to follow the displacements of a network of discrete nodes labeled by integer-valued coordinates. The equilibrium problem is solved numerically using the L-BFGS algorithm, which constructs a positive definite approximation to the Hessian for quasi-Newton steps. p. 8 The stability boundary in continuum theory is given by det(Q) = 0, where Q is the Eulerian acoustic tensor. p. 9 This threshold marks the onset of elastic instability in the continuum theory. p. 9

The MTM approach allows for dealing with a statistically meaningful number of dislocations while accounting in a geometrically exact way for finite deformations. The method preserves the basic nature of both long-range and short-range interactions of dislocations at least when they are away from the boundaries. p. 8 The computational domain is simulated using the method of domain replication to simulate an effectively infinite crystal under controlled macroscopic affine deformation. p. 9 This procedure ensures that the macroscopic deformation gradient F¯(α) is consistently applied across all periodic images of the central domain. p. 9 The use of finite elements allows for the calculation of energy based on deformed lengths and angles, capturing complex interactions accurately.

The authors confirm that the power-law exponent ϵ ≈ 1.0 has been recorded in discrete dislocation dynamics studies of disorder-free 2D samples containing a fixed number of preexisting dislocations. p. 3 The value of the power-law exponent is interpreted in crystal plasticity as representing either dislocation jamming or selfinduced glassiness. p. 3 The exponent τ characterizing stress drops is different from ϵ, suggesting that in the post-yield regime, individual avalanches are no longer hindered by local structural constraints. p. 4 The pre-yield values of the cutoff parameters LDx are much smaller than their post-yield values, indicating larger avalanches become more probable. p. 4 The fractal dimension Dϵ is ≈ 0. p. 236 in the pre-yield regime, pointing towards highly localized, spatially scattered rearrangements. p. 4 The post-yield regime yields a fractal dimension Dϵ ≈ 0. p. 498, suggesting the emergence of 1D-like system spanning bands. p. 4 The similarity between the structure of intermittent plastic fluctuations in amorphous and crystalline solids is supported by elasto-plastic models being very similar to the MTM. p. 4 The authors conclude that they are dealing with the same universality class based on computed exponents. p. 4

The study demonstrates that mechanically driven perfect crystals can exhibit quasi-brittle plastic yielding remarkably similar to well-annealed glassy materials. The parallel features of the mechanical response emerge after pristine crystals acquire self-generated disorder resulting from massive dislocation nucleation during the breakdown of an affine elastic configuration. The ensuing quasi-amorphous crystals exhibit pre- and post-yield avalanches with power law statistics whose matching exponents are indicative of the marginality of the associated mechanical system. This work provides a framework to account for dislocation climb, cross slip and forest hardening in 3D crystals. p. 4 The results confirm that self-induced marginality is a universal feature of mechanical systems near instability. p. 3 The transition from isolated dislocation motion to collective behavior implies access to a much broader repertoire of relaxation mechanisms. p. 2 The study validates the finite-size scaling ansatz through excellent overlap in scaled probability distributions across various system sizes. p. 2 The research provides a strong connection between the hierarchical organization of energy wells and intermittent, scale-free responses. p. 3

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved understanding of material response to mechanical instability by modeling crystalline materials as quasi-amorphous systems through massive dislocation nucleation, allowing prediction of both pre-yield and post-yield behavior.

  2. Ability to predict the statistical structure of plastic fluctuations in both crystalline and amorphous solids by identifying power law exponents that match across the yielding transition, indicating a shared universality class.

  3. Capability to distinguish between localized microplasticity and global shear band formation during plastic flow by analyzing changes in fractal dimensions of avalanche structures, specifically noting the transition from almost 0D avalanches to 1D avalanches in post-yield regimes.

  4. Development of a predictive framework for the marginal stability of mechanically driven systems by correlating the power law exponent epsilon approximately equal to 1.0 with concepts from spin glass theory and jamming points.

  5. Enhanced simulation capabilities through a mesoscopic tensorial model that resolves topological restructuring during dislocation nucleation without relying on specialized phenomenological assumptions, enabling statistically meaningful simulations of dislocation numbers.

Sources

Related papers