Measuring the Evolution of Bulge, Disk and Colour Gradients in HST Observations of Galaxies with 3D Modelling

arXiv:2510.11156 · astro-ph.GA, astro-ph.CO · Submitted 2025-10-13 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Astrophysics Radio. Generated commentary on the latest astrophysics papers.

Vera: We're looking at the paper: "Measuring the Evolution of Bulge, Disk and Colour Gradients in HST Observations of Galaxies with 3D Modelling".

Jocelyn: Here's the gist of the paper. We measure galaxy structural properties and colour gradients using HST images to trace the evolution of galaxy components.

Vera: The single most informative sentence about the paper's subject and finding is: Bulges at z ∼ 1 differ markedly from z ∼ 0, with typical S´ersic index n ∼ 1.0 and bulge-to-disc size ratio Re/hd ∼ 0.15, suggesting most galaxies host pseudo-bulges formed via secular evolution.

Jocelyn: Modeling Methodology The authors jointly fit 3D bulge and disk models to 2505 galaxies in GOODS-South across seven bands (bvizYJH) to IAB = 25.5, accounting for different component ellipticities and inclination-dependent dust extinction.

Vera: They define 3D analytical models for bulge and disk surface brightness using Monte Carlo points drawn from an analytic function that describes the surface brightness distribution for each component.

Title and authors: Vera: So we're looking at this paper by Welikala et al., titled "Measuring the Evolution of Bulge, Disk and Colour Gradients in HST Observations of Galaxies with three dee Modelling" <ref:2510.11156#pg1,Measuring the Evolution of Bulge, Disk and Colour Gradients in HST Observations>. It’s pretty straightforward work—they use those deep Hubble Space Telescope images to study how galaxy structure, specifically bulges and disks, changes over time.

Jocelyn: Yeah. What’s interesting is that they aren't just looking at a snapshot; they are tracing the evolution of these components by fitting three dee models across seven different color bands <ref:2510.11156#pg1>. It sounds like they want to see how galaxies have grown structurally from earlier times to today.

Subrahmanyan: Exactly. The implication here is that we’re moving past simple measurements and trying to build a physical picture of galaxy growth, which is crucial for understanding how structure forms in the universe on large scales.

Vera: Right. So the core idea they are pushing is that they are jointly fitting three dee bulge and disk models to about two thousand five hundred galaxies in GOODS-South, using data from seven different filters, down to an IAB magnitude of twenty-five point five <ref:2510.11156#pg1,3D bulge and disk models to>. They specifically accounted for different component ellipticities and inclination dependent dust extinction.

Jocelyn: That sounds complicated but necessary because we know that the dust and how a galaxy is tilted really mess up the measurements if you don't account for them properly. So they are modeling those effects directly into their fitting process rather than just trying to correct them after the fact.

Subrahmanyan: That’s key. When you ignore those inclination dependent extinction effects, you bias your structural parameters, which means your understanding of the galaxy’s true shape and evolution becomes skewed. The paper suggests that this approach gives a much more accurate constraint on what we are actually measuring.

Vera: They define these three dee analytical models using Monte Carlo points drawn from an analytic function that describes the surface brightness distribution for each component <ref:2510.11156#pg1>. For the disk, they assume it has cylindrical geometry, with its surface brightness profile described by I of r equals I naught e minus r over h d.

Jocelyn: And for the bulge, they model it as a prolate spheroid, assuming an intrinsic shape of a spheroid with zero ellipticity, which is then flattened to make it prolate. It’s like taking a sphere and stretching it along one axis to get that football-like shape.

Subrahmanyan: That setup is important because they are testing different shapes. They also test different values for the Sersic index, n, from zero point five up to four in steps of zero point five when generating the bulge models for each value of n > zero point five <ref:2510.11156#pg3,for each value of n>.

Title and authors: Vera: And they generate these bulge models by randomly drawing the inclination angle theta b for each radial point, just like they did for the disk’s inclination angle theta d. Then they derive the x i and y i coordinates of each point from the spherical coordinates, r, and angle theta.

Jocelyn: That means for every single galaxy in their sample, they are essentially creating many possible 2D projections based on those three dee shapes to see which projection best matches what we actually see in the HST images <ref:2510.11156#pg1>. That’s a lot of computational work.

Subrahmanyan: And they do this across all those n values, which is why the paper mentions generating bulge models for each value of n going from zero point five to four in steps of zero point five. They are testing if different underlying shapes fit the data better.

Vera: Now let’s talk about how they handle the tricky part—the dust. They model extinction effects as functions of inclination angle, wavelength, and dust opacity using synthetic images called P11 models.

Jocelyn: The weight they calculate per Monte Carlo point i is the ratio of the pixel value that particle falls into in the dusty P11 map to the corresponding pixel value in the dust free P11 map. That’s a way to quantify how much light is being suppressed by dust at a specific point.

Subrahmanyan: That weighting scheme is how they determine if a dusty model with an extra degree of freedom tau is favored over a dustless one for Dusty galaxies using an F test. It's like they are statistically deciding if the extra complexity of modeling dust actually helps explain the data or just makes things unnecessarily complicated.

Vera: Structurally, their single Sersic fitting of three dee models suggests a disk like nature for the HST population with n equals one point zero <ref:2510.11156#pg1>. With two component fitting, the sample is largely disk dominated and is best characterized by n equals one point zero for the bulge and a bulge effective radius to disk scale length ratio of zero point one five.

Jocelyn: That ratio of zero point one five, Re over h d, that’s a specific way they are characterizing how big the bulge is compared to how long the disk is <ref:2510.11156#pg1>. It sounds like most galaxies fit this pattern.

Subrahmanyan: That finding about n equals one point zero for the bulge and that size ratio of zero point one five suggests that most galaxies host pseudo bulges formed via secular evolution, which aligns well with what we expect from disc instabilities and gas flows in the universe.

Title and authors: Vera: They find the median h d is zero point two two arcseconds plus or minus zero point zero zero four arcseconds for the full sample when looking at a magnitude limit of IAB less than twenty-five point five <ref:2510.11156#pg1>.

Jocelyn: That median value gives us a concrete number to work with for how long those disks are, which is helpful for our time-domain studies too. But what about the color information they’re getting?

Subrahmanyan: They find that the median colour gradient is consistent with zero for all other redshift bins, but there's a strong correlation with the overall V minus I colour of the galaxy. Redder galaxies show redder cores, and bluer galaxies have close to zero median colour gradients.

Vera: So if you look at the color gradient, redder galaxies have more positive colour gradients, meaning their core is redder than their outskirts. The model captures this bulk variation in the colour gradients well.

Jocelyn: That correlation with the overall V minus I color seems like a strong link between structure and stellar populations. It tells us that the bulge and disk aren't just structural things; they are tied to how old or metal-rich the stars are in those regions.

Subrahmanyan: This connects back to galaxy formation scenarios because these findings suggest that central regions of HST galaxies share similar structural properties to Freeman type one late-type spiral galaxies and local dwarf galaxies.

Vera: And the distribution of n from the two component fitting to the full sample is consistent with pseudo bulges whose profiles resemble exponential or near exponential discs rather than de Vaucouleurs profiles, which are characteristic of classical bulges with n equals four point zero.

Jocelyn: So they are strongly arguing against these classical bulge shapes dominating what we see in this HST population. This points us toward the secular evolution picture where slow internal processes shape the galaxy over time.

Subrahmanyan: That is exactly what the standard picture invokes, through things like bar-driven gas flows, disc instabilities, and stellar migration. The implication is that the building blocks of these galaxies are following a path dictated by internal physics rather than just big mergers at all times.

Vera: Because they did this joint fitting across seven bands to IAB point five, it gives them much stronger constraints on galaxy structural parameters than fitting to just one band alone.

Jocelyn: And they also derived new weak lensing priors from this work, finding that the median h d is zero point two two arcseconds to a depth of IAB equals twenty-five point five <ref:2510.11156#pg1>.

Subrahmanyan: Those measurements are important because they help reconstruct accurate distributions of bulges and discs that are essential for cosmic shear calibration, which is vital for measuring dark energy. They also observed a weak correlation between galaxy ellipticity and redshift, and a strong correlation between galaxy ellipticity and disk scale length.

Title and authors: Vera: And the median colour gradient is consistent with zero for all other redshift bins when looking at those measurements.

Jocelyn: It’s interesting that they found this correlation with galaxy ellipticity—the shape of the galaxy—and the disk scale length. It suggests a physical link between how long a disk is and how elongated it is, which isn't immediately obvious from just looking at structure.

Subrahmanyan: That structural relationship, combined with the color gradient analysis, means that we need to be careful when we use these HST measurements for things like ultra-precise dark energy measurements.

Vera: And they pointed out a specific issue: a colour or environment dependent correction to the colour gradient bias may therefore be needed for ultra-precise dark energy measurements.

Jocelyn: So the paper is laying out the necessary groundwork for future work that needs to account for these subtle systematic effects when we try to use galaxy structure data in cosmology.

Subrahmanyan: Exactly. The effect of those outliers on shear bias may need to be investigated via simulations and emulations, which is a necessary next step in connecting this structural detail to the broader cosmological puzzle.

Vera: So, to wrap up this whole piece, the main thing is that by doing this three dee modeling with extinction accounted for, they are providing a robust characterization of these galaxies that points toward pseudo-bulges and secular evolution <ref:2510.11156#pg1>.

Jocelyn: It’s a lot of detail on how things are modeled—the P11 models, the Monte Carlo sampling—but the result is clear: for this HST sample, we see a disk dominated structure with n equals one point zero and Re over h d equals zero point one five.

Subrahmanyan: And that structural finding, combined with the color gradient analysis and the weak lensing priors derived from this work, tells us that these central regions are structurally very similar to local dwarf galaxies.

Vera: So they are using these deep HST images to look at how structure evolves over cosmic time, and what they found is a disk-like nature for most of the sample with n equals one point zero.

Jocelyn: It’s about using this detailed modeling to give us better priors for weak lensing, which is essential for calibrating dark energy measurements across different redshifts.

Subrahmanyan: We are looking at the paper "Measuring the Evolution of Bulge, Disk and Colour Gradients in HST Observations of Galaxies with three dee Modelling" <ref:2510.11156#pg1,Measuring the Evolution of Bulge, Disk and Colour Gradients in HST Observations>. It’s a solid piece of work that uses complex three dee modeling to provide a robust characterization of galaxy evolution through secular processes <ref:2510.11156#pg1>.

The paper's summary: Vera: So, this paper is taking all that complex three dee modeling and fitting seven different color bands to about two thousand five hundred galaxies in GOODS-South, and what they found is that the HST population looks mostly disk-like structurally.

Jocelyn: Yeah, so they used these Monte Carlo points to build their models for the bulge and the disk separately, and when you combine those fits with accounting for inclination dependent dust extinction, it shows that most galaxies have a bulge structure characterized by an n value of one point zero.

Subrahmanyan: That n equals one point zero is key here because it means they aren't seeing those big de Vaucouleurs profiles that we usually associate with classical bulges, which have an n value of four point zero.

Vera: Right. And when they use the two component fitting method, which is more detailed, the sample ends up being largely disk-dominated and fits best with a bulge effective radius to disk scale length ratio of zero point one five.

Jocelyn: So that zero point one five ratio tells us how big that bulge is compared to how long the disk stretches out. It's a specific structural fingerprint for this population.

Subrahmanyan: And they connect that back to galaxy formation, suggesting these are pseudo bulges, which means they form through secular evolution—slow internal processes like bar-driven gas flows and disc instabilities, not just big mergers.

Vera: They also looked at the color gradients, and they found that the strongest correlation is with the overall V minus I color of the galaxy itself. Redder galaxies have more positive colour gradients, meaning their core is redder than their outskirts.

Jocelyn: That tells us that structural properties like bulge size are tied to how old or metal-rich the stars are in those central regions. It’s not just a shape thing; it's a stellar population thing too.

Subrahmanyan: And this connects to what we see in local dwarf galaxies, suggesting they share similar structures, which supports the secular evolution idea for these early universe systems.

Vera: The paper also points out that while most of the sample can be modeled without dust correction, about eighteen percent of them are edge-on with significant central obscuration. They found a dust opacity value tau equal to four point zero for that obscuration.

Jocelyn: That tau value is what they use to quantify how much light is being blocked in those dusty systems, which is essential for getting the intrinsic structural parameters right.

Subrahmanyan: This whole analysis provides new weak lensing priors, specifically finding a median disk scale length of zero point two two arcseconds when looking at that magnitude limit of IAB less than twenty five point five.

Vera: Those measurements are crucial because they help us reconstruct accurate maps of bulges and disks, which we need for calibrating cosmic shear measurements in future dark energy studies.

Jocelyn: They also found some correlations between galaxy ellipticity—the shape of the galaxy—and its disk scale length, which is a physical link between how long a disk is and how elongated it is.

Subrahmanyan: That structural relationship combined with the color gradient analysis means we need to be careful with any correction we apply when using these HST measurements for ultra-precise dark energy measurements.

Vera: The authors suggest that they might need a correction to the colour gradient bias that depends on whether you are looking at a galaxy's environment or its color itself.

Jocelyn: So, the paper is laying out the necessary groundwork for future work that needs to account for these subtle systematic effects when we try to use galaxy structure data in cosmology.

Subrahmanyan: The effect of those outliers on shear bias might need to be investigated through simulations and emulations, which is a necessary next step in connecting this structural detail to the broader cosmological puzzle.

The paper's improvements: Vera: So, we've seen how they used those three dee models to get those structural parameters like the n value of one point zero and that bulge to disk ratio of zero point one five, and now they're talking about how this work can be improved for future studies.

Jocelyn: Yeah, so the authors are suggesting that incorporating inclination dependent ellipticities into their three dee models would give us more precise galaxy size priors when we use Bayesian shape estimation and calibration simulations.

Subrahmanyan: That makes sense. If you get better priors on the galaxy size, you get a tighter constraint on how we model structure in cosmic shear surveys, which is vital for calibrating dark energy measurements.

Vera: And they also mention using measured colour gradient distributions from those HST data to forward model systematic shear bias in Euclid, which would help us quantify how that bias works.

Jocelyn: That's interesting because it means we can use these HST colour gradients to predict how much error we might get when we try to measure the weak lensing signal in the Euclid survey.

Subrahmanyan: It connects this structural work directly to a major upcoming cosmological experiment, so if they can model that bias, it helps us plan better observations for dark energy density constraints.

Vera: They also suggest improving how dust attenuation effects are modeled by explicitly using synthetic images like P11 models to account for inclination angle and wavelength.

Jocelyn: So instead of just applying a simple correction, they want to model the dust as a function of those physical parameters, which should allow us to retrieve the intrinsic structural parameters without that observational bias.

Subrahmanyan: If you can get those intrinsic parameters clean, it enables more robust component stellar evolution modeling through appropriate dust opacity corrections for future work.

Vera: This whole discussion around improving the data handling methods shows how important these detailed physical models are for getting reliable results from deep sky observations.

Conclusion: Vera: So, to wrap up this paper on "Measuring the Evolution of Bulge, Disk and Colour Gradients in HST Observations of Galaxies with three dee Modelling," we've seen how they used these detailed three dee models to confirm that most galaxies have a disk-like structure with an n value of one point zero.

Jocelyn: Right. And they showed that this structural characterization, combined with color gradients, links the central regions of these galaxies to Freeman type one late-type spirals and local dwarf galaxies.

Subrahmanyan: That means we're seeing a consistent picture across cosmic time for how structures build up from slow, internal processes rather than just sudden mergers.

Vera: The implication is that this detailed modeling gives us much better structural priors for weak lensing, which is essential when we try to calibrate dark energy measurements across different redshifts.

Jocelyn: They also highlighted the need for careful correction of colour gradient bias depending on where you are looking, which means future cosmological observations have to account for those environmental differences.

Subrahmanyan: And the effect of those outliers on shear bias needs investigation through simulations, so this work sets up a clear path for how we can use these structural details in cosmology.

Vera: Overall, the study using three dee modeling and extinction correction gives us a robust characterization of galaxy evolution based on what we observe with HST data.

Jocelyn: It's pretty cool how much detail you can get out of those deep images when you put that kind of physical modeling into it.

Subrahmanyan: This paper really solidifies the idea that secular evolution is a major driver in shaping galaxy morphology over time, which is what we need to test against other cosmological observations.

Institute for Astronomy, University of Edinburgh · Department of Physics, University of Oxford

astro-ph.GA, astro-ph.CO

Submitted: 2025-10-13

Updated: 2026-11-10

Comments: 20 pages, 20 figures, 3 tables. Accepted for publication in MNRAS

Code: https://github.com/mmechtley/astroRMS

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 89/100

The gist: We measure galaxy structural properties and colour gradients using HST images to trace the evolution of galaxy components.

Key concepts

Sérsic Index (n)
This parameter describes the shape or profile of a galaxy's light distribution, specifically how steeply the light falls off from the center. A low value like n=1.0 indicates a disk-like structure where the surface brightness decreases exponentially outwards, rather than a steep de Vaucouleurs profile typical of classical bulges.
Bulge-to-Disk Size Ratio (Re/hd)
This ratio compares the effective radius of the bulge (Re) to the scale length of the disk (hd). The derived value of 0.15 suggests that for these galaxies, the bulge is relatively small compared to its disk, which is a key indicator supporting models where bulges are formed through slow, secular processes like internal instabilities.
Secular Evolution
This refers to slow internal evolutionary processes within a galaxy that gradually change its structure over long timescales. The paper suggests that the observed pseudo-bulges are the result of these processes, such as bar-driven gas flows and disc instabilities, rather than rapid mergers or other violent events.
Dust Extinction Modeling
The authors modeled how dust in galaxies obscures light differently based on the galaxy's viewing angle (inclination), wavelength, and dust density. By using synthetic models like P11, they could correct the observed structural parameters to reveal the intrinsic properties of the galaxy structure.

Terminology

Summary

We measure galaxy structural properties and colour gradients using HST images to trace the evolution of galaxy components. p. 0

Where the paper says it

Taylor1 , G. Congedo1 1 Institute for Astronomy, University of Edinburgh, Royal Observatory, Blackford Hill, Edinburgh, EH9 3HJ, UK 2 Department of Physics, University of Oxford, Denys Wilkinson Building, Keble Road, OX1 3RH, UK 14 October 2025 ABSTRACT We measure galaxy structural properties and colour gradients using HST images to trace the evolution of galaxy components.

The single most informative sentence about the paper's subject and finding is: Bulges at z ∼ 1 differ markedly from z ∼ 0, with typical S´ersic index n ∼ 1.0 and bulge-to-disc size ratio Re/hd ∼ 0. p. 0
Where the paper says it

Bulges at z ∼ 1 differ markedly from z ∼ 0, with typical S´ersic index n ∼ 1. 0 and bulge-to-disc size ratio Re/hd ∼ 0.

15, suggesting most galaxies host pseudo-bulges formed via secular evolution. p. 0
Where the paper says it

0 and bulge-to-disc size ratio Re/hd ∼ 0. 15, suggesting most galaxies host pseudo-bulges formed via secular evolution.

Modeling Methodology

The authors jointly fit 3D bulge and disk models to 2505 galaxies in GOODS-South across seven bands (bvizYJH) to IAB = 25.5, accounting for different component ellipticities and inclination-dependent dust extinction. p. 0

Where the paper says it

We jointly fit 3D bulge and disk models to 2505 galaxies in GOODS-South across seven bands (bvizYJH) to IAB = 25. 5, accounting for different component ellipticities and inclination-dependent dust extinction.

They define 3D analytical models for bulge and disk surface brightness using Monte Carlo points drawn from an analytic function that describes the surface brightness distribution for each component. p. 1
Where the paper says it

27, and ΩΛ = 0. 2 GALAXY MODELS The galaxy models are rendered as a dense collection of Monte Carlo (MC) points that are drawn from an analytic function that describes the surface brightness distribution for each component.

The disk assumes cylindrical geometry, with its surface brightness profile described by I(r) = I(0) e −r/hd. p. 1
Where the paper says it

1 3D Disk The disk assumes cylindrical geometry. The surface brightness profile of the disk at radius r is described in terms of the disk scale length, hd, of the intrinsic 3D shape such that I(r) = I(0) e −r/hd , (1) where I(0) is the surface brightness at r =0.

The bulge is modeled as a prolate spheroid, assuming an intrinsic shape of a spheroid (ellipticity ϵ = 0), flattened to make it prolate. p. 1
Where the paper says it

(2) For the disk, we generate 10,000 points in the z direction, both above and below the plane of the disk, out to a truncation length zmax by randomly sampling from a cumulative function F(z) such that the z value of each sampled point is given by z = z0 tanh−1 (F(z)). 2 Prolate bulge We model the 2D projection of the bulge assuming a 3D intrinsic shape of a spheroid (ellipticity ϵ = 0) which is then flattened to make it prolate.

Extinction and Data Handling

The authors model extinction effects as functions of inclination angle, wavelength, and dust opacity using synthetic images of axisymmetric dusty disk galaxies (P11 models). They calculate a weight wi per MC point i, as the ratio of the pixel value that the particle falls into in the dusty P11 map to the corresponding pixel value in the dust-free P11 map. p. 3

Where the paper says it

In this work, we examine the dependence of the colour gradient (measured by a model) on each of these quantities. gridding the points), we obtain a weight, wi per MC point, i, as the ratio of the pixel value that the particle falls into in the dusty P11 map to the corresponding pixel value in the dust-free P11 map, for every value of λ, τ and θ.

They use an F-test to determine if a dusty model with an extra degree of freedom (τ) is favored over a dustless one for Dusty galaxies. p. 8
Where the paper says it

If the Fstatistic is large and the associated p-value is small, we reject the null hypothesis that the variances of the two populations are the same). For the galaxies in the Dusty sample, the Ftest shows that a dusty model which has an extra degree of freedom (τ ) is favoured over a dustless one (i.

Structural Findings

The single S´ersic fitting of 3D models suggests a disk-like nature for the HST population with ng = 1.0. With two component fitting, the sample is largely disk-dominated and is best characterised by n = 1. p. 6

Where the paper says it

In the two-component fitting, we assume the bulge and disk are co-centered and coaligned (θb = θd = θg and ϕb = ϕd = ϕg), with the ratio of their scale lengths being a parameter in the fit. 1 Bulge For the bulge, we fit a S´ersic model characterised by a n (over the range 0.

0 for the bulge and a bulge effective radius to disk scale length ratio Re/hd = 0. p. 6
Where the paper says it

(9) The component flux densities are computed analytically in each band as described in Appendix A2 and are for the stellar components in the absence of dust. 2 Disk The bulge is linked to the disk through the ratio of bulge effective radius, Re, to disk scale length, hd.

p. 6
Where the paper says it

(9) The component flux densities are computed analytically in each band as described in Appendix A2 and are for the stellar components in the absence of dust. 2 Disk The bulge is linked to the disk through the ratio of bulge effective radius, Re, to disk scale length, hd.

15. The median hd = 0. p. 4
Where the paper says it

1 shows the redshift, absolute magnitude, apparent magnitude and colour distribution of the sample. The median redshift of the sample is 0.

22′′±0.004′′ for the full sample for the magnitude limit IAB < 25. p. 8
Where the paper says it

22′′±0. 004′′ for the full sample for the magnitude limit IAB < 25.

5.

Evolution and Weak Lensing Priors

The authors derive new weak lensing priors with this work, finding that the median hd = 0.22′′to a depth of iab = 25. p. 7

Where the paper says it

1 Single S´ersic fits without extinction We start first with multi-band one-component S´ersic fits (no extinction applied) which are used as starting points for the two-component fitting. These fits also give us the first insights into the sizes and surface brightness profiles of this sample with these newly constructed 3D models to a depth IAB < 25.

5. They observe a weak correlation between galaxy ellipticity and redshift and a strong correlation between galaxy ellipticity and disk scale length. p. 7
Where the paper says it

3 Computing ellipticities from the best-fit models The calibration of the shear measurement in upcoming weak lensing surveys will rely on accurate distributions of galaxy priors. One important relation is the one between galaxy ellipticity and other galaxy parameters such as disk scale length (Kannawadi et al.

The median colour gradient is consistent with zero for all other redshift bins. p. 3
Where the paper says it

These limitations in the P11 models could introduce some noise and bias in the fitted structural parameters, particularly for z > 1 galaxies. Despite this, they provide a robust framework for incorporating extinction effects on surface brightness profiles and galaxy light spectra (and thereby colour gradients which we obtain from fitting the MC models to HST data and stratify in redshift bins).

Colour Gradient Analysis

The strongest correlation is with the overall V − I colour of the galaxy, with redder galaxies showing redder cores. The bluest galaxies have close to zero median colour gradient. p. 5

Where the paper says it

Our iterative testing focused on minimising contamination from source flux while being close enough to capture the local background variations around each galaxy and having sufficient pixels for statistical robustness. We subtract the median background level in the annulus from the flux density of every pixel in the image.

Redder galaxies have more positive colour gradients i. p. 0
Where the paper says it

Redder galaxies show redder cores relative to their outskirts, and brighter galaxies have redder cores. Key words: Surveys – Galaxies: statistics – Galaxies: formation – Galaxies: evolution – Cosmology: weak lensing 1 INTRODUCTION The primary focus of this paper is measuring colour gradients in galaxies, which provide important clues to the distribution of stellar populations and assembly history.

e., the core is redder than the outskirts. p. 0
Where the paper says it

4, but colours converge at higher redshifts and fainter magnitudes. Redder galaxies show redder cores relative to their outskirts, and brighter galaxies have redder cores.

The model captures the bulk variation in the colour gradients. p. 0
Where the paper says it

Extinction strongly affects structural parameters and colour gradients in ∼26% of the sample—primarily edge-on galaxies with central obscuration (B-band face-on optical depth τ ≃ 4) that reveal clear bulge components in the near-infrared. Despite irregular morphologies, the model captures observed colour gradients well.

Implications for Galaxy Formation

The findings suggest that central regions of HST galaxies share similar structural properties to Freeman Type-I late-type spiral galaxies (MacArthur et al. 2003) and local dwarf galaxies. p. 2

Where the paper says it

The bulge light can still be extincted by the dust present in either of the dust disks. Several studies have applied the models to correct for dust attenuation in large samples of local galaxies (Pastrav et al.

The distribution of n from the two-component fitting to the full sample is consistent with pseudo-bulges whose profiles resemble exponential or near-exponential discs rather than de Vaucouleurs profiles (n = 4. p. 7
Where the paper says it

1 Single S´ersic fits without extinction We start first with multi-band one-component S´ersic fits (no extinction applied) which are used as starting points for the two-component fitting. These fits also give us the first insights into the sizes and surface brightness profiles of this sample with these newly constructed 3D models to a depth IAB < 25.

0) characteristic of ‘classical’ bulges. p. 0
Where the paper says it

Despite irregular morphologies, the model captures observed colour gradients well. Bulges at z ∼ 1 differ markedly from z ∼ 0, with typical S´ersic index n ∼ 1.

The standard picture invokes secular evolution through slow internal processes such as bar-driven gas flows, disc instabilities and stellar migration. p. 0
Where the paper says it

15, suggesting most galaxies host pseudo-bulges formed via secular evolution. Galaxy ellipticity correlates strongly with disk scale-length and absolute magnitude, partly driven by dust extinction variations.

Weak Lensing Implications

The measurements on HST deep images are important for reconstructing accurate distributions of bulges and discs that are essential in cosmic shear calibration. A colour or environment-dependent correction to the colour gradient bias may therefore be needed for ultra-precise dark energy measurements. p. 0

Where the paper says it

In weak lensing, colour gradients are a systematic bias source for space-based shear measurements, particularly when using single broad-band filters with diffraction-limited PSFs. The bias arises from wavelength-dependent PSFs and ⋆ E-mail:niraj.

The effect of these outliers on the shear bias may be investigated via simulations and emulations. p. 2
Where the paper says it

4 Modelling the effect of extinction on surface brightness There are a few astrophysical effects that can potentially impact the observed structural parameters and colour gradients in galaxies: (i) Dust extinction which preferentially extincts the light in the central region at bluer wavelengths and for more inclined disks. This can bias both the observed structural parameters, such as hd, and the measured colour gradients.

Summary of Key Results

The catalogue generated by both the one-component and two-component fitting is summarised in Table A1. The stacked likelihood for the Dusty sample yields n = 1. p. 8

Where the paper says it

15 for the full sample when no extinction (dustless) is applied ot the models. The stacked likelihood for the Dusty sample yields n =1.

0, Re/hd = 0.15 and τ = 4.0. When n, τ and Re/hd are fitted for each galaxy, neglecting extinction would cause us to report a higher fraction of low n bulges (by approximately 10% for n = 0. p. 8
Where the paper says it

The bulge component, which is best fit by a τ=4. 0 model, is relatively faint compared to the disk in the optical bands but contributes a higher fraction to the total light in the galaxy in the nearinfrared bands.

5) in the HST sample and a higher fraction of galaxies where the model underpredicts the colour gradients. p. 0
Where the paper says it

Extinction strongly affects structural parameters and colour gradients in ∼26% of the sample—primarily edge-on galaxies with central obscuration (B-band face-on optical depth τ ≃ 4) that reveal clear bulge components in the near-infrared. Despite irregular morphologies, the model captures observed colour gradients well.

The median hd changes by 1% when z0/hd changes by 20%, and the median eg changes by 1% when β0 changes by 25%. p. 9
Where the paper says it

We find negligible sensitivity of the distributions on the assumed values of β0 for the bulge and z0/hd for the disk (see Appendix A5). For example, the median hd changes by 1% when z0/hd changes by 20%, and the median eg changes by 1% when β0 changes by 25%.

Conclusion

We model the surface brightness distribution of the bulge and disk components of galaxies in 3D and perform joint fitting to images of galaxies in multiple passbands. The simultaneous joint fitting approach provides stronger constraints on galaxy structural parameters than fitting to a single band. p. 7

Where the paper says it

It is worth noting that since we fix the bulge flattening parameter β0 in the fitting to HST galaxies, the range of observed bulge ellipticities will be constrained as a result. Distributions of key galaxy structural parameters, S´ersic index ng (left) and half-light radius of galaxy R g e (right), from two methods: single component 3D multi-band S´ersic fits (this work) and single-band S´ersic fits with GALFIT by Griffith et al.

Our findings are summarised as follows: Single S´ersic fitting of 3D models suggest a disk-like nature for the HST population with ng = 1. p. 1
Where the paper says it

Third, extinction effects—which preferentially suppress central light at bluer wavelengths and higher inclinations (Graham & Worley 2008)—are typically ignored, biasing structural parameters. In this paper, we address these limitations by: (1) defining 3D analytical models for bulge and disc surface brightness; (2) modelling extinction effects as functions of inclination angle, wavelength, and dust opacity; (3) jointly fitting models (single S´ersic and two-component, with/without extinction) to HST CANDELS data; (4) computing component structural parameters, ellipticities and colour gradients—and their distributions; (5) measuring empirical relations relevant for weak lensing and colour gradient evolution with redshift and galaxy properties.

0. With two component fitting, the HST sample is largely disk-dominated and is best characterised by n = 1. p. 6
Where the paper says it

In the two-component fitting, we assume the bulge and disk are co-centered and coaligned (θb = θd = θg and ϕb = ϕd = ϕg), with the ratio of their scale lengths being a parameter in the fit. 1 Bulge For the bulge, we fit a S´ersic model characterised by a n (over the range 0.

0 for the bulge and a bulge effective radius to disk scale length ratio Re/hd = 0.15. While the majority of the HST population can be modelled without extinction, roughly 18 percent of the sample are mostly edge-on galaxies with significant central obscuration. p. 0
Where the paper says it

5, accounting for different component ellipticities and inclination-dependent dust extinction. Extinction strongly affects structural parameters and colour gradients in ∼26% of the sample—primarily edge-on galaxies with central obscuration (B-band face-on optical depth τ ≃ 4) that reveal clear bulge components in the near-infrared.

We find a B-band rest-frame opacity corresponding to this obscuration of τ ≈ 4. p. 3
Where the paper says it

gridding the points), we obtain a weight, wi per MC point, i, as the ratio of the pixel value that the particle falls into in the dusty P11 map to the corresponding pixel value in the dust-free P11 map, for every value of λ, τ and θ. (iii) Since the models generated from the MC points will be fitted to the HST galaxies which have a distribution of inclination angles and redshifts (and therefore correspond to different rest-frame wavelengths, see Sec.

0. The sample is largely disk-dominated (i. p. 3
Where the paper says it

As the majority of the HST galaxies are at z ∼ 1, we expect the thin disk to dominate the disk light and therefore neglect the thick disk (and its associated dust disk) in this work. Out to z ∼ 1, galaxies have begun to show evolutionary differences from local samples but still largely maintain disk-dominated morphologies where the axisymmetric assumptions are reasonable (Sargent et al.

e. a lower bulge fraction). p. 4
Where the paper says it

Observations of the morphologies in the postage stamps suggest that a significant fraction of HST galaxies are edgeon. They also show central obscuration in the v and i images but a clear bulge in the near-infrared bands.

Data Sources

The sources of the data used in this paper are listed below. The sources include Multiwavelength Survey by Yale-Chile (MUSYC, Cardamone et al. p. 3

Where the paper says it

5) sample of 2505 galaxies. These are derived from a photometric catalogue for the GOODS-South field from the Multiwavelength Survey by Yale-Chile (MUSYC, Cardamone et al.

2010). ACS images and weight maps are version 2. p. 4
Where the paper says it

5 (observed frame), capturing the diversity of galaxy populations during the peak epoch of cosmic star formation history. The ACS images and weight maps are version 2.

0 of the reduced, calibrated, stacked mosaics (https://archive. p. 4
Where the paper says it

The ACS images and weight maps are version 2. 0 of the reduced, calibrated, stacked mosaics 2 in the F475W (b), F606W (v), F775W (i) and F850LP (z) bands (Giavalisco et al.

stsci.edu/pub/hlsp/goods/v2/h goods v2. p. 3
Where the paper says it

1 The photometric redshift catalog has a depth 1 https://archive. edu/pub/hlsp/goods/catalog_r2/

0 rdm.html). WFC3 images from the CANDELS data are obtained from CANDELS data in the GOODS-South field (Grogin et al. p. 4
Where the paper says it

The pixel scale of the images is 0. The Wide Field Camera 3 (WFC33 ) images in F105W (Y ), F125W (J) and F160W (H) bands are obtained from CANDELS data in the GOODS-South field (Grogin et al.

2011). Grism spectroscopic redshifts from 3D-HST (Brammer et al. p. 4
Where the paper says it

3 and is generated from deep medium-band optical imaging from the Subaru telescope and 32-band photometry. Grism spectroscopic redshifts from 3D-HST (Brammer et al.

2012) are available for 637 galaxies in the sample. p. 4
Where the paper says it

Grism spectroscopic redshifts from 3D-HST (Brammer et al. 2012) are available for 637 galaxies in the sample and we use photometric redshifts from Cardamone et al.

Acknowledgements

NW thanks R. Tuffs for providing data from the P11 models which were used in this work, M. p. 2

Where the paper says it

We therefore use synthetic images of axisymmetric dusty disk galaxies, which were used to calculate the integrated attenuated SEDs of disk galaxies by Popescu et al. (2011) (referred to as P11) and Tuffs et al.

Holliman for help with high-performance computing resources, Bryan Gillis for discussions and Shona Matthew for editing the paper. p. 1
Where the paper says it

Third, extinction effects—which preferentially suppress central light at bluer wavelengths and higher inclinations (Graham & Worley 2008)—are typically ignored, biasing structural parameters. In this paper, we address these limitations by: (1) defining 3D analytical models for bulge and disc surface brightness; (2) modelling extinction effects as functions of inclination angle, wavelength, and dust opacity; (3) jointly fitting models (single S´ersic and two-component, with/without extinction) to HST CANDELS data; (4) computing component structural parameters, ellipticities and colour gradients—and their distributions; (5) measuring empirical relations relevant for weak lensing and colour gradient evolution with redshift and galaxy properties.

NW and GC acknowledge support from the UK Space Agency (UKSA). p. 0
Where the paper says it

However, high dust content at the peak of cosmic star formation (z ∼2), coupled with agedust degeneracy, makes interpreting radial colour gradients challenging even with NIR observations (F¨orster Schreiber & Wuyts 2020). In weak lensing, colour gradients are a systematic bias source for space-based shear measurements, particularly when using single broad-band filters with diffraction-limited PSFs.

AT acknowledges support from the Sciences and Technology Facilities Council (STFC) and UKSA.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved structural parameter estimation for weak lensing calibration by incorporating 3D models that account for inclination-dependent ellipticities, as suggested by 3D models that include these effects. This allows for more precise galaxy size priors used in Bayesian shape estimation and calibration simulations.

  2. Enhanced ability to model systematic shear bias in Euclid by using measured colour gradient distributions from HST data to forward model them, quantified as measured colour gradients from HST can be forward-modelled to quantify shear bias.

  3. Improved determination of dust attenuation effects on structural parameters by explicitly modeling extinction as a function of inclination angle, wavelength, and dust opacity using synthetic images like P11 models. This enables the retrieval of intrinsic structural parameters independent of observational biases.

  4. Refined classification and characterization of galaxy morphology by fitting joint bulge and disk components to multi-band HST data, leading to findings that the sample is best described by a discy bulge plus a disc of finite thickness.

  5. More robust interpretation of galaxy formation scenarios by using extinction-corrected SEDs derived from surface brightness modeling, which enables more robust component SEDs through appropriate dust opacity corrections for future work.

Abstract

We measure galaxy structural properties and colour gradients using HST images to trace the evolution of galaxy components. We develop and apply a physically motivated 3D bulge+disk modelling framework, jointly fitting the components in 2505 galaxies in GOODS-South across seven bands (bvizYJH) to I AB=25.5, accounting for different component ellipticities and inclination-dependent dust extinction. Extinction strongly affects structural parameters and colour gradients in about 26% of the sample - primarily edge-on galaxies with central obscuration (B-band face-on optical depth τ 4) that reveal clear bulge components in the near-infrared. Despite irregular morphologies, the model captures observed colour gradients well. Bulges at z about 1 differ markedly from z about 0, with typical Sérsic index n about 1.0 and bulge-to-disc size ratio R e/h d about 0.15, suggesting most galaxies host pseudo-bulges formed via secular evolution. Galaxy ellipticity correlates strongly with disk scale-length. We trace bulge and disk evolution from z about 0 to z about 2.5: bulges are redder than disks (observed-frame) at z < 1.4, but colours converge at higher redshifts and fainter magnitudes. Redder galaxies show redder cores relative to their outskirts, and brighter galaxies have redder cores. These results provide new measurements of bulge and disk structural properties at z about 1 and observational constraints on their evolution, while also providing empirically motivated input distributions for assessing colour gradient systematics in weak lensing surveys.

Sources

Related papers