Ultralow Lattice Thermal Conductivity in Orthorhombic Rb2Se3 with rigid covalent trimers and a soft ionic framework
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: We're looking at the paper: "Ultralow Lattice Thermal Conductivity in Orthorhombic Rb2Se3 with rigid covalent trimers and a soft ionic framework".
Mira: Here's the gist of the paper. Ultralow lattice thermal conductivity in Rb2Se3 is achieved through a unique quasi-chain configuration involving strongly covalent Se-Se-Se trimers and a soft ionic framework that induces pronounced anisotropy and strong anharmonicity.
Kai: This study investigates the intrinsic origins of the ultralow lattice thermal conductivity in Rb2Se3, which exhibits a simple orthorhombic structure.
Mira: Structural Characterization and Bonding Analysis The crystal structure of Rb2Se3 adopts the orthorhombic space group Cmc21, with calculated lattice constants in reasonable agreement with experimental data.
Kai: The bonding configurations reveal a hierarchy of bond strengths, where Se1-Se2 bonds are stronger compared to the weaker bonding between Rb and Se atoms.
Paper summary: Kai: To wrap up this discussion on "Ultralow Lattice Thermal Conductivity in Orthorhombic Rb2Se3 with rigid covalent trimers and a soft ionic framework," the authors are essentially pointing to the specific structural motifs as the direct cause of the ultralow thermal conductivity in this compound <ref:2507.21634#pg1>.
Mira: They are emphasizing that it's not just one feature, but this combination—the Se-Se-Se trimers and that soft ionic framework—that generates both strong anharmonicity and anisotropy <ref:2507.21634#pg2>.
Lev: From an engineering standpoint, the implication is that if we want to engineer materials for low thermal conductivity, we need to look for these specific types of covalent arrangements rather than just looking at simple atomic masses or bond strengths <ref:2507.21634#pg3>.
Kai: So, the paper suggests that understanding this rigid covalent trimers structure and how it dictates the soft ionic framework is fundamental to predicting thermal transport in alkali metal compounds <ref:2507.21634#pg2>.
Mira: And they are encouraging future work to focus on figuring out exactly how those rattling atoms form in these materials <ref:2507.21634#pg3>.
Lev: That makes sense, because knowing the formation mechanism helps us figure out what kinds of structural defects we might expect when trying to fabricate a device using this material <ref:2507.21634#pg3>.
Conclusion: Kai: So we've seen how these Se trimers and that soft framework lead to really low thermal conductivity in this Rb two selenium three material, and now we need to talk about what that actually means for us.
Mira: Yeah, the title itself points right at the core of it: rigid covalent trimers and a soft ionic framework. It’s about showing how those specific structures create the rattling motion that kills heat flow.
Lev: From an error correction standpoint, if we could build hardware based on that structure, we'd have to figure out how to control those vibrational modes because they seem really sensitive.
Kai: Exactly, and the authors are basically saying that by focusing on this specific arrangement—the Se-Se-Se trimer—they found the direct link to the ultralow values we saw in their calculations.
Mira: And what's interesting is how it connects to the physics of anharmonicity; they show how those soft energy curves cause massive vibrational coupling, which is what drives that low thermal conductivity.
Lev: So, for us building real systems, it means we can’t just ignore these local chemical environments; the way atoms are bonded locally dictates whether you get a good or bad heat conductor.
Kai: It really shows that understanding the fundamental building blocks of the crystal structure is key to predicting how materials will behave at a transport level.
Mira: And this study gives us a blueprint for looking at alkali metal compounds, suggesting we should look for those specific covalent motifs when trying to design low-conductivity materials.
Lev: That's interesting because it shifts the focus from just bulk properties to understanding why those specific local configurations matter so much for phonon transport.
Kai: So, while the paper confirms these results, it leaves us wondering what kind of dynamic behavior we see in these structures during actual experimental measurements at room temperature.
Tiantian Jia, Yongsen Tang, Yongsheng Zhang
School of Science, Nanjing University of Posts and Telecommunications · Advanced Research Institute of Multidisciplinary Sciences, Qufu Normal University
cond-mat.mtrl-sci
Submitted: 2025-07-29
Updated: 2026-11-13
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 92/100
The gist: Ultralow lattice thermal conductivity in Rb2Se3 is achieved through a unique quasi-chain configuration involving strongly covalent Se-Se-Se trimers and a soft ionic framework that induces pronounced…
Key concepts
- Quasi-Chain Configuration
- This refers to a structural arrangement where Se atoms link together strongly in chains, acting almost like single units. The paper found that three Se atoms form a stable 'Se-Se-Se trimer' which acts as a pseudoatom within the crystal structure, creating these chain-like features.
- Anharmonicity
- Anharmonicity describes how the vibrational energy levels of atoms change when they are displaced from their ideal positions. In Rb2Se3, this is strong because the quasi-chain structure and soft framework cause the atomic forces to be very sensitive to movement, leading to highly anharmonic vibrations.
- Grüneisen Parameter ($\gamma$)
- The Grüneisen parameter measures how much a specific vibrational mode changes in frequency when the material is compressed or stretched. The paper found that most low-frequency modes have very high Grüneisen parameters (up to 20), indicating that these soft vibrational modes are highly sensitive to external pressure or strain.
Terminology
Summary
Ultralow lattice thermal conductivity in Rb2Se3 is achieved through a unique quasi-chain configuration involving strongly covalent Se-Se-Se trimers and a soft ionic framework that induces pronounced anisotropy and strong anharmonicity. p. 0 This study investigates the intrinsic origins of the ultralow lattice thermal conductivity in Rb2Se3, which exhibits a simple orthorhombic structure. p. 0
Structural Characterization and Bonding Analysis
The crystal structure of Rb2Se3 adopts the orthorhombic space group Cmc21, with calculated lattice constants in reasonable agreement with experimental data. The bonding configurations reveal a hierarchy of bond strengths, where Se1-Se2 bonds are stronger compared to the weaker bonding between Rb and Se atoms. p. 4 The weak bonding between Rb and Se atoms is attributed to the chemical inertness of Rb+ ions after losing their outermost electron. p. 4
Phonon Localization and Quasi-Chain Formation
The phonon density of states analysis shows that Rb2Se3 exhibits distinct localized high-frequency optical phonons, primarily contributed by non-metallic Se atoms. The projected two-dimensional electron localization function (ELF) in the (010) plane reveals large ELF values around the three Se atoms, indicating significant covalent bonding between them. p. 6 By treating the Se-Se-Se trimer as a pseudoatom, a quasi-chain arrangement is revealed within the (100) plane. p. 7
Anharmonicity and Vibrational Behavior
The quasi-chain configuration contributes to significant anisotropy, with Rb atoms displaying the most pronounced flatness in their potential energy curves along the [100] direction. The presence of flatter energy curves is indicative of weaker forces and softer phonon characteristics, aligning with low-frequency contributions in the phonon density of states. p. 8 Mode-dependent Grüneisen parameters indicate that the majority of low-frequency phonon modes exhibit substantial Grüneisen parameters (γ > 2). p. 0 The highest Grüneisen parameter approaches 20, significantly exceeding those in other compounds like SnSe and PbTe. p. 1
Lattice Thermal Conductivity Results
The calculated lattice thermal conductivities along the three crystallographic directions at 300 K are 0.12, 0.14, and 0.15 W/mK along ([100], [010], and [001]) directions respectively. p. 8 These values are even lower than the amorphous limit of SnTe (0. p. 54 W/m·K). The analysis confirms that the presence of the quasi-chain structure and stable Se-Se-Se trimer results in soft phonon characteristics and significant anharmonicity. p. 8
Conclusion
The strong non-metallic Se-Se-Se trimer and the quasi-chain arrangement facilitate rattling vibrational behavior of all atoms in Rb2Se3. This behavior contributes to the soft phonon characteristics and strong anharmonicity in the compound, ultimately resulting in ultralow lattice thermal conductivities in various directions. p. 2 p. 2 The findings elucidate the fundamental origins of low lattice thermal conductivity in Rb2Se3. p. 6
Acknowledgments
This work is supported by National Natural Science Foundation of China, Grant Nos. 12104035 and by Natural Science Research Start-up Foundation of Recruiting Talents of Nanjing University of Posts and Telecommunications, Grant No. p. 0 NY223205.
References
[1] A. E. De Barr, Introduction to Solid State Physics, Vol. p. 1 8 (John Wiley & Sons, Hoboken, 1957)
[2] X. Shi, J. Yang, J. R. Salvador, M. Chi, J. Y. Cho, H. Wang, S. Bai, J. Yang, W Zhang and L Chen in J Am Chem Soc 133 7837 (2011)
[3] W Li and N Mingo in Phys Rev B 91 144304 (2015)
[4] T Tadano and S Tsuneyuki in Phys Rev Lett 120 105901 (2018)
[5] T Takabatake, K Suekuni, T Nakayama and E Kaneshita in Rev Mod Phys 86 669 (2014)
[6] W Lai, Y Wang, D T Morelli and X Lu in Adv Funct Mater 25 3648 (2015)
[7] L-D Zhao, S-H Lo, Y Zhang, H Sun, G Tan, C Uher, C Wolverton V Dravid and M G Kanatzidis in Nature 508 373 (2014)
[8] Y Zhang, S Hao, L D Zhao, C Wolverton and Z Zeng in J Mater Chem A 4 12073 (2016)
[9] J Qi, B Dong, Z Zhang, Z Zhang, Y Chen, Q Zhang, S Danilkin X Chen, J He L Fu X Jiang G Chai S Hiroi K Ohara Z Zhang W Ren T Yang J Zhou S Osami J He D Yu B Li and Z Zhang in Nat Commun 11 5197 (2020)
[10] M K Jana, K Pal, U V Waghmare and K Biswas in Angew Chemie Int Ed 55 7792 (2016)
[11] M K Jana, K Pal, A Warankar P Mandal U V Waghmare and K Biswas in J Am Chem Soc 139 4350 (2017)
[12] M D Nielsen, V Ozolins and J P Heremans in Energy Environ Sci 6 570 (2013)
[13] S Lee, K Esfarjani, T Luo, J Zhou Z Tian and G Chen in Nat Commun 5 3525 (2014)
[14] G Qin, X Zhang, S-Y Yue Z Qin H Wang Y Han and M Hu in Phys Rev B 94 165445 (2016)
[15] H Liu, X Shi, F Xu, L Zhang W Zhang L Chen Q Li C Uher T Day and G Snyder Jeffrey in Nat Mater 11 422 (2012)
[16] K Yang, H Yang, Y Sun, Z Wei J Zhang P-H Tan J-W Luo S-S Li S-H Wei and H-X Deng in Sci China Physics Mech Astron 66 277311 (2023)
[17] H Xie, E S Bozin Z Li M Abeykoon S Banerjee J P Male G J Snyder C Wolverton S J Billinge and M G Kanatzidis in Adv Mater 34 2202255 (2022)
[18] H-P Liang, S Geng, T Jia C-N Li X Xu X Zhang and S-H Wei in Phys Rev B 109 035205 (2024)
[19] T Jia, Z Feng, S Guo X Zhang and Y Zhang in ACS Appl Mater Interfaces 12 11852 (2020)
[20] J Li, W Hu and J Yang in J Am Chem Soc 144 4448 (2022)
[21] P Böttcher in Zeitschrift Für Anorg Und Allg Chemie 461 13 (1980)
[22] G Petretto, S Dwaraknath H P C Miranda D Winston M Giantomassi M J van Setten X Gonze K A Persson G Hautier and G-M Rignanese in Sci Data 5 180065 (2018)
[23] J Yuan, Y Chen and B Liao in J Am Chem Soc 145 18506 (2023)
[24] J Yue, J Zheng, J Li X Shen W Ren Y Liu and T Cui in Mater Today Phys 46 101517 (2024)
[25] C Wei, Z Feng Y Yan G Zhao Y Fu and D J Singh in Phys Rev B 108 235203 (2023)
[26] M Jian, Z Feng Y Fu and G Qin in J Phys Chem C 128 16721 (2024)
[27] J Yue, J Zheng, J Li S Guo W Ren H Liu Y Liu and T Cui in ACS Appl Mater Interfaces 16 20597 (2024)
[28] X Zeng, J Jiang G Niu L Sui Y Zhang X Wang X Liu A Chen M Jin and K Yuan in J Phys Chem Lett 13 9736 (2022)
[29] R Cheng, Z Zeng C Wang N Ouyang and Y Chen in Phys Rev B 109 054305 (2024)
[30] G Kresse and D Joubert in Phys Rev B 59 1758 (1999)
[31] G Kresse and J Furthmüller in Phys Rev B 54 11169 (1996)
[32] J P Perdew A Ruzsinszky G I Csonka O A Vydrov G E Scuseria L A Constantin X Zhou and K Burke in Phys Rev Lett 100 136406 (2008)
[33] L He, F Liu G Hautier M J T Oliveira M A L Marques F D Vila J J Rehr G-M Rignanese and A Zhou in Phys Rev B 89 064305 (2014)
[34] H J Monkhorst and J D Pack in Phys Rev B 13 5188 (1976)
[35] A Togo, F Oba and I Tanaka in Phys Rev B - Condens Matter Mater Phys 78 134106 (2008)
[36] W Li, J Carrete N A Katcho and N Mingo in Comput Phys Commun 185 1747 (2014)
[37] J Carrete B Vermeersch A Katre A van Roekeghem T Wang G K H Madsen and N Mingo in Comput Phys Commun 220 351 (2017)
[38] W M Haynes, T J Bruno and D R Lide in CRC Handbook of Chemistry and Physics 96th Edition (Internet Version 2016) CRC Press/Taylor and Francis Boca Raton FL 2016
[39] Y Pei, L Zheng W Li S Lin Z Chen Y Wang X Xu H Yu Y Chen B Ge in Adv Electron Mater 2 1600019 (2016)
[40] D G Cahill, S K Watson and R O Pohl in Phys Rev B 46 6131 (1992)
[41] T Jia, J Carrete Z Feng S Guo Y Zhang and G K H Madsen in Phys Rev B 102 125204 (2020)
[42] T Jia, J Carrete G K H Madsen Y Zhang and S Wei in Phys Rev B 105 245203 (2023)
[43] A Savin, R Nesper S Wengert and T F Fässler in Angew Chemie Int Ed English 36 1808 (1997)
[44] T Jia, X Liu Y Zhang and S Wei in Phys Rev B 107 115204 (2023)
[45] F Xiao, Q-Y Xie X Ming H Li J Zhang and B-T Wang in Phys Rev B 109 245202 (2024)
[46] C Zhang, J Sun J Cheng and Q Wang in Phys Rev B 110 174309 (2024)
[47] K Yuan, Z Feng X Zhang and D Tang in J Mater Chem C 13 2414 (2025)
[48] Y Zhang, S Hao L D Zhao C Wolverton and Z Zeng in J Mater Chem A 4 12073 (2016)
[49] Z Tian, J Garg K Esfarjani T Shiga J Shiomi and G Chen in Phys Rev B 85 184303 (2012)
[50] A E De Barr Introduction to Solid State Physics Vol 8 John Wiley & Sons Hoboken 1957
The study elucidates the fundamental origins of low lattice thermal conductivity in the alkali metalbased ionic compound Rb2Se3 and may serve as a reference for future investigations into the thermal transport properties of analogous alkali metal-based compounds. This behavior contributes to the soft phonon characteristics and strong anharmonicity in the compound, ultimately resulting in ultralow lattice thermal conductivities in various directions.
[1] A E De Barr Introduction to Solid State Physics Vol 8 John Wiley & Sons Hoboken 1957
[2] X Shi J Yang J R Salvador M Chi J Y Cho H Wang S Bai J Yang W Zhang and L Chen in J Am Chem Soc 133 7837 (2011)
[3] W Li and N Mingo in Phys Rev B 91 144304 (2015)
[4] T Tadano and S Tsuneyuki in Phys Rev Lett 120 105901 (2018)
[5] T Takabatake, K Suekuni, T Nakayama and E Kaneshita in Rev Mod Phys 86 669 (2014)
[6] W Lai, Y Wang, D T Morelli and X Lu in Adv Funct Mater 25 3648 (2015)
[7] L-D Zhao, S-H Lo, Y Zhang, H Sun, G Tan C Uher C Wolverton V Dravid and M G Kanatzidis in Nature 508 373 (2014)
[8] Y Zhang, S Hao L D Zhao C Wolverton and Z Zeng in J Mater Chem A 4 12073 (2016)
[9] J Qi B Dong Z Zhang Z Zhang Y Chen Q Zhang S Danilkin X Chen J He L Fu X Jiang G Chai S Hiroi K Ohara Z Zhang W Ren T Yang J Zhou S Osami J He D Yu B Li and Z Zhang in Nat Commun 11 5197 (2020)
[10] M K Jana K Pal U V Waghmare and K Biswas in Angew Chemie Int Ed 55 7792 (2016)
[11] M K Jana, K Pal, A Warankar P Mandal U V Waghmare and K Biswas in J Am Chem Soc 139 4350 (2017)
[12] M D Nielsen V Ozolins and J P Heremans in Energy Environ Sci 6 570 (2013)
[13] S Lee K Esfarjani T Luo J Zhou Z Tian and G Chen in Nat Commun 5 3525 (2014) <ref:2573.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved AI systems can predict ultralow lattice thermal conductivity in alkali metal-based ionic compounds by analyzing structural features like
a unique quasi-chain configuration
andstrongly covalent Se-Se-Se trimers.
-
The improved system can identify rattling vibrational behavior by correlating
the strong non-metallic Se-Se-Se trimer and the quasi-chain arrangement
withsoft phonon characteristics and strong anharmonicity.
-
The system can predict specific thermal transport properties by calculating mode dependent Grüneisen parameters, noting that
the highest Grüneisen parameter is attributed to one of the transverse acoustic phonon branches (TA') located along the high-symmetry GY line.
Related papers
- Structural contribution to light-induced gap suppression in Ta 2 NiSe 5
- Anatomy of fast current-induced skyrmion motion in synthetic antiferromagnets
- Magnetic control of an exciton-polariton condensate in a van der Waals magnet
- High-pressure elastic properties of GeO2 polymorphs up to 120 GPa
- Decoupling Strain-Rate Sensitivity and Deformation Length Scale Effects in Neutron-Irradiated Tungsten: A Coupled Nano-Indentation, HR-EBSD and Crystal Plasticity Study
- Magnetism modulation in Co3Sn2S2 by current-assisted domain wall motion