Locating the Atoms at the Hard-soft Interface of Gold Nanoparticles
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Locating the Atoms at the Hard-soft Interface of Gold Nanoparticles".
Mira: Here's the gist of the paper. Surface structure affects the growth, shape and properties of nanoparticles Here, we determine the atomic structure of the hard-soft interface in a metallic nanoparticle by developing low-dose imaging conditions in four-dimensional scanning transmission electron microscopy that are preferentially sensitive to surface adatoms.
Kai: By revealing experimentally the copper additives and bromide surfactant counterion at the surface of a gold nanocuboid and quantifying their interatomic distances, our direct, low-dose imaging method provides atomic-level understanding of chemically sophisticated nanomaterial surface structures.
Mira: The Challenge in Characterization Measuring the atomic structure – that is, the type, position and relative arrangement of atoms – at the nanofacetmetal adsorbates-surfactant interface remains extremely challenging.
Kai: Methods with both sufficient resolution and sensitivity to detect a monolayer (or sub-monolayer) of ions simultaneously with the nanoparticle surface and the surfactant have been elusive.
Paper summary: Kai: So, to build on that, this paper "Locating the Atoms at the Hard-soft Interface of Gold Nanoparticles" summarizes how they tackled this measurement problem. They developed an approach using electron scattering calculations to identify imaging conditions that are differentially sensitive to three specific features: the nanocrystal surface facet, the metal adatoms, and the surfactant headgroup >
Mira: And beyond just finding those conditions, they made a choice to select settings that keep the electron dose relatively low because they knew damage is a big issue for delicate surfactants and nanoparticle surfaces >
Lev: That makes sense from an engineering standpoint. When you're dealing with things that are sensitive to the beam, minimizing that dose is crucial for getting any reliable data on real hardware >
Kai: So, they applied these conditions to their gold nanocuboid system grown in the presence of copper and bromide, and what they revealed was some quantitative structural validation >
Mira: They used a refined structural model based on the interior of the gold nanocuboid to simulate four-dimensional STEM data and compare it against their experimental measurements across different angular ranges >
Lev: That simulation step is important because it helps them refine those interatomic distances, like finding a distance of one point eight one angstrom from the last gold layer to the first copper layer >
Kai: And they found some pretty specific numbers there, for example, a distance of one point one three angstrom from the first copper monolayer to the second copper sublayer >
Mira: They also measured a distance of two point five six angstrom from that second copper sublayer to the bromide surfactant head group layer >
Lev: That confirms their model by providing these quantitative measurements, showing how those different layers stack up in space, which is what you need for any real material science application >
Conclusion: Kai: So, wrapping up this paper "Locating the Atoms at the Hard-soft Interface of Gold Nanoparticles", they show that copper additives form a fully occupied monolayer on the gold nanocuboid surface, followed by a half-occupied second layer >
Mira: And then they found that these copper ad layers are followed by the surfactant counterion, bromide, at a distance of two point five six angstrom to the outermost copper layer >
Lev: That really confirms their complex interaction with those additives and explains why you see symmetry breaking and the formation of single-crystal nanocuboid products >
Kai: It means they've got a direct method now for getting an atomic-level understanding of how these surfaces are modified by these chemicals, which is what the paper was aiming for >
Mira: The implication is that we can better understand and quantify surface chemistries and energies, which leads to a much deeper understanding of how these sophisticated nanomaterials behave >
Lev: It moves us closer to designing materials where we can control the surface structure more precisely because now we have this low-dose imaging method for it >
School of Physics and Astronomy, Monash University · Monash Centre for Electron Microscopy, Monash University Centre for Electron Microscopy, Molecular Foundry, Lawrence Berkeley National Laboratory, State Key Laboratory of Surface Physics and Department of Physics, Fudan University · Department of Materials Science and Engineering, Monash University
cond-mat.mtrl-sci, cond-mat.mes-hall
Submitted: 2025-03-13
Updated: 2025-03-13
DOI: 10.1038/s41467-025-68113-5
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 91/100
The gist: Surface structure affects the growth, shape and properties of nanoparticles Here, we determine the atomic structure of the hard-soft interface in a metallic nanoparticle by developing low-dose…
Key concepts
- 4D-STEM
- A sophisticated scanning transmission electron microscopy technique that captures data across four dimensions. This method was specifically developed here to be sensitive to surface adatoms and allows researchers to map the atomic structure of the interface while keeping the electron dose low enough to prevent damage.
- Surface Adatoms
- These are individual atoms or small groups of atoms located on the outermost surface of a material, like a nanoparticle. The study focused on identifying these specific surface features—such as copper and bromide ions—to understand how they modify the nanoparticle's structure.
- Electron Scattering Calculations
- Theoretical simulations used to predict how electrons will scatter when interacting with different parts of the sample. These calculations were crucial for designing the 4D-STEM imaging conditions that would be most sensitive to specific features, like surface facets or metal adatoms.
- Hard-Soft Interface
- The boundary region where a hard material, such as a metallic gold nanoparticle, meets a softer layer composed of adsorbed species like metal additives (copper) and surfactants (bromide). Understanding this interface is key to controlling the nanoparticle's growth and properties.
Terminology
Summary
Surface structure affects the growth, shape and properties of nanoparticles Here, we determine the atomic structure of the hard-soft interface in a metallic nanoparticle by developing low-dose imaging conditions in four-dimensional scanning transmission electron microscopy that are preferentially sensitive to surface adatoms. p. 1 By revealing experimentally the copper additives and bromide surfactant counterion at the surface of a gold nanocuboid and quantifying their interatomic distances, our direct, low-dose imaging method provides atomic-level understanding of chemically sophisticated nanomaterial surface structures. p. 1
The Challenge in Characterization
Measuring the atomic structure – that is, the type, position and relative arrangement of atoms – at the nanofacetmetal adsorbates-surfactant interface remains extremely challenging. Methods with both sufficient resolution and sensitivity to detect a monolayer (or sub-monolayer) of ions simultaneously with the nanoparticle surface and the surfactant have been elusive. p. 1 Conventional transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) are powerful tools for imaging the atomic structure of nanocrystal surfaces, but achieving imaging conditions that are simultaneously sensitive to the metal nanocrystal and the surfactant is extremely difficult. p. 1
Development of a Novel Imaging Approach
In this work, we develop and apply an approach to determine the atomic structure and measure the interatomic distances at a nanoparticle-adsorbate-surfactant interface using STEM imaging conditions tuned specifically for this task by exploiting the specimen information encoded in the angular distribution of dynamically scattered electrons. Specifically, we use electron scattering calculations to identify imaging conditions that are differentially sensitive to the features of interest, namely, the nanocrystal surface facet, the metal-adatoms and the surfactant headgroup. p. 2 We select those conditions that keep the electron dose relatively low to minimize damage. p. 2
Identification of Metal Additive Locations
We first apply conventional methods to determine the approximate location and distribution of the metal additives and surfactants with low spatial resolution. Energy dispersive X-ray spectroscopy (EDX) reveals Cu on all the surfaces of the Au nanocuboid, although the distribution is not always even. p. 2 Trace amounts of bromide near the surface are also detected, but we emphasize this signal is just marginally above the noise in the EDX spectra. p. 2 The qualitative distribution of surfactant is identified using conventional STEM-HAADF. p. 2
Quantitative Structural Validation
To further validate and improve the model, we use the known structure of the interior of the Au nanocuboid as a reference to quantify various experimental parameters. We simulate the 4D-STEM data for this thicknessrefined structural model and quantitatively compare it with the experimental dataset across different angular ranges. p. 5 This leads to refined atomic distances in projection of 1. p. 581 Å from the last Au layer to the first Cu layer, 1. p. 513 Å from the first Cu monolayer to the second Cu sublayer and 2. p. 556 Å from the Cu sublayer to the Br surfactant head group layer. p. 5
Conclusion on Interface Structure
We reveal that Cu additives form a fully-occupied monolayer on the gold nanocuboid surface, followed by a half-occupied second layer. Cu ad-layers are followed by the surfactant counterion (Br-) at a distance of 2. p. 656 Å to the outermost Cu layer, confirming their complex interaction with the additives. p. 6 The complex nature of this surface which leads to symmetry breaking and the formation of the single-crystal nanocuboid products. p. 6
Methods
The authors synthesized gold nanocuboids using aqueous solutions of CTAB, HAuCl4, and CuCl2. TEM experiments were carried out at 300 kV with a 15 mrad probe-forming aperture and 4D-STEM experiments with a 9 mrad probe-forming aperture. p. 6 CBED simulations were calculated using a GPU-enhanced frozen-phonon multi-slice code. p. 7
Data Availability
All relevant data generated in this study are provided in the paper and its Supplementary Information files. Source data has also been deposited in Figshare under the accession link xxx. p. 7
References
-
Sun, Y. & Xia, Y. Shape-controlled synthesis of gold and silver nanoparticles
-
Sau, T. K. & Murphy, C. p. 7 J. Room temperature, high-yield synthesis of multiple shapes of gold nanoparticles in aqueous solution
-
Funston, A. p. 0 M., Novo, C., Davis, T. p. 7 J. & Mulvaney, P Plasmon coupling of gold nanorods at short distances and in different geometries
-
Wang, K. et al Kinetic diffusion–controlled synthesis of twinned intermetallic nanocrystals for COresistant catalysis
-
Boehnke, N. p. 7 et al Massively parallel pooled screening reveals genomic determinants of nanoparticle delivery
-
Mueller, N. p. 7 S. et al Deep strong light–matter coupling in plasmonic nanoparticle crystals
-
Xia, Y., Xiong, Y. p. 7, Lim, B. & Skrabalak, S. p. 7 E Shape-controlled synthesis of metal nanocrystals: Simple chemistry meets complex physics? p. 7 Angew. Chemie - Int. p. 7 Ed
-
Marks, L. D. & Peng, L Nanoparticle shape, thermodynamics and kinetics
-
Li, Y., et al Corner-, edge-, and facet-controlled growth of nanocrystals
-
Li, W., Tong, W., Etheridge, J. p. 0 p. 0 p. 0 & Funston, A. p. 0 p. 0 p. 0 M Copper assisted symmetry and size control of gold nanobars
-
Walsh, M. J., Barrow, S. p. 7 J., Tong, W., Funston, A. p. 0 M. & Etheridge, J Symmetry breaking and silver in gold nanorod growth
-
Li, W., Tong, W., Etheridge, J. & Funston, A. M Copper assisted symmetry and size control of gold nanobars
-
Sun, J. et al Selective Synthesis of Gold Cuboid and Decahedral Nanoparticles Regulated and Controlled by Cu2+ Ions
-
Huang, L. et al Shape regulation of high-index facet nanoparticles by dealloying
-
Rodríguez-Fernández, J. p. 7 p. 7 et al The effect of surface roughness on the plasmonic response of individual sub-micron gold spheres
-
Tong, W., Walsh, M. p. 7 J., Mulvaney, P. p. 7, Etheridge, J. & Funston, A. M Control of Symmetry Breaking Size and Aspect Ratio in Gold Nanorods: Underlying Role of Silver Nitrate
-
Rodríguez-Fernández, J., Pérez-Juste, J. p. 8, García De Abajo, F. p. 8 J. & Liz-Marzán, L. p. 8 M Seeded growth of submicron Au colloids with quadrupole plasmon resonance modes
-
Walsh, M. J. et al A Mechanism for Symmetry Breaking and Shape Control in Single-Crystal Gold Nanorods
-
Burrows, N. p. 8 D. et al Surface Chemistry of Gold Nanorods
-
Ilan, K., Vanderlei, M. p. 8 J., A., R. L. & Hila, A X-ray diffraction and computation yield the structure of alkanethiols on gold(111)
-
D., J. P., Guillermo, C. p. 8, J., A. C., A., B. D. & D., K. R Structure of a Thiol Monolayer–Protected Gold Nanoparticle at 1. p. 81 Å Resolution
-
Payam, A F. & Passian, A Imaging beyond the surface region: Probing hidden materials via atomic force microscopy
-
Choi, M H. et al Characterization of Ligand Adsorption at Individual Gold Nanocubes
-
Zhou, Q. et al Real-space imaging with pattern recognition of a ligand-protected Ag374 nanocluster at sub-molecular resolution
-
Zhang, L. et al Cu2+-assisted synthesis of hexoctahedral Au-Pd alloy nanocrystals with high-index facets
-
Hong, M. et al Underpotential Deposition of Silver on Gold for Surface Catalysis of Plasmon-Enhanced Reduction of 4-Nitrothiophenol
-
Zhang, Q. et al Faceted Gold Nanorods: Nanocuboids, Convex Nanocuboids, and Concave Nanocuboids
-
Ross, M B. et al Tunable Cu Enrichment Enables Designer Syngas Electrosynthesis from CO2
-
Hore, M J A. et al Probing the Structure, Composition, and Spatial Distribution of Ligands on Gold Nanorods
-
Jackson, S R. p. 8, McBride, J R. p. 8, Rosenthal, S J. p. 8 & Wright, D W Where’s the silver? p. 8 imaging trace silver coverage on the surface of gold nanorods
-
Fujita, T. et al Atomic origins of the high catalytic activity of nanoporous gold
-
Qiao, L. et al Atomically precise nanoclusters predominantly seed gold nanoparticle syntheses
-
Azubel, M et al Electron microscopy of gold nanoparticles at atomic resolution
-
González-Rubio, G. p. 8 et al Micelle-directed chiral seeded growth on anisotropic gold nanocrystals
-
Lin, Y., Wu, Z., Wen, J., Poeppelmeier, K R. p. 8 & Marks, L D Imaging the atomic surface structures of CeO2 nanoparticles
-
Katz-Boon, H. p. 8 et al Stability of crystal facets in gold nanorods
-
Ophus, C Four-Dimensional Scanning Transmission Electron Microscopy (4D-STEM): From Scanning Nanodiffraction to Ptychography and Beyond
-
Janicek, B E. p. 8 et al Quantitative Imaging of Organic Ligand Density on Anisotropic Nanocrystals
-
Pedrazo-Tardajosa, A et al Direct visualisation of ligands on gold nanoparticles in a liquid environment
-
Meena, S K. et al The role of halide ions in the anisotropic growth of gold nanoparticles: A microscopic, atomistic perspective
-
Cowley, J M. & Moodie, A F The scattering of electrons by atoms and crystals I A new theoretical approach
-
Allen, L J., D’Alfonso, A J. p. 9 & Findlay, S D Modelling the inelastic scattering of fast electrons
-
C S., T. & J M C Surfaceal Potential Study of Au(111) Surface
-
Cowley, J M Surface energies and surface structure of small crystals studied by use of a stem instrument
-
Tate, M W. et al High Dynamic Range Pixel Array Detector for Scanning Transmission Electron Microscopy
-
Herrero, E. p. 9, Buller, L J. p. 9 & Abruña, H D Underpotential deposition at single crystal surfaces of Au, Pt, Ag and other materials
-
Personick, M L. p. 9, Langille, M R. p. 9, Zhang, J. p. 9
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Develop an AI system capable of analyzing 4D-STEM diffraction patterns to directly reconstruct atomic models of hard-soft interfaces by integrating regions preferentially sensitive to specific elements like copper, as demonstrated in Fig 3C. This allows for the
unambiguous determination of the Au-Cu-Br surface atomic structure.
-
Implement a predictive model within the AI system that uses thickness profiles derived from averaged experimental diffraction patterns to quantitatively measure interatomic distances across reconstructed structural models, such as measuring
Au-Cu0=1.81Å, Cu0-Cu1=1.13Å, Cu1-Br=2.56Å.
-
Design an AI module that can compare simulated 4D-STEM data generated from refined structural models against experimental datasets to validate the quantitative model, ensuring
the contrast at the nanocuboid surface observed in all four sets of images exhibits close agreement between the simulated and experimental data.
Related papers
- Structural contribution to light-induced gap suppression in Ta 2 NiSe 5
- Anatomy of fast current-induced skyrmion motion in synthetic antiferromagnets
- Magnetic control of an exciton-polariton condensate in a van der Waals magnet
- High-pressure elastic properties of GeO2 polymorphs up to 120 GPa
- Decoupling Strain-Rate Sensitivity and Deformation Length Scale Effects in Neutron-Irradiated Tungsten: A Coupled Nano-Indentation, HR-EBSD and Crystal Plasticity Study
- Magnetism modulation in Co3Sn2S2 by current-assisted domain wall motion