Two-dimensional antiferromagnets with non-relativistic spin splitting switchable by electric polarization
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Two-dimensional antiferromagnets with non-relativistic spin splitting switchable by electric polarization".
Mira: Here's the gist of the paper. Spin-split antiferromagnets have significance for antiferromagnetic (AFM) spintronics due to their momentum dependent spin polarization which can be exploited for the control and detection of the AFM order parameter.
Kai: Antiferromagnetic (AFM) spintronics has recently emerged as a subfield of spintronics, where an AFM order parameter serves as a state variable.
Mira: Due to being robust against magnetic perturbations, producing no stray fields, and exhibiting ultrafast spin dynamics, antiferromagnets can serve as functional materials for spintronic applications.
Kai: In contrast to conventional collinear antiferromagnets with spin-degenerate bands enforced by PPPP or UUUU symmetries (where PP is space inversion, is time reversal, UU is spin flip, and is lattice translation), NRSS antiferromagnets break these symmetries producing momentumdependent spin polarization, even in the absence of SOC.
Paper summary: Kai: So to recap, this paper is about finding a way to get nonrelativistic spin splitting in two dimensional antiferromagnets just by stacking them in a polar bilayer.
Mira: The authors are exploring how the electric polarization of these stacked layers drives the emergence of this reversible electric polarization and the NRSS effect in their band structure.
Lev: So they look at different 2D AFM materials and identify several representative ones that show different types of nonrelativistic spin splitting when they're stacked into a polar bilayer <ref:2503.09877#pg2>.
Kai: And what really matters is that they demonstrate this nonrelativistic spin splitting can have both altermagnetic and nonaltermagnetic origins depending on the stacking setup.
Mira: They also lay out the symmetry requirements needed for this NRSS to be switchable by electric polarization, which is a crucial piece of information for designing something functional.
Lev: The main claim they make, as summarized in the paper, is that you can have this switching happen in type-II and type-III stackings.
Kai: And they argue that the electric polarization switching of this nonrelativistic spin splitting might be more practical for device applications than the traditional Néel vector switching.
Mira: It suggests a way to control these properties without having to reverse the main antiferromagnetic ordering, which is pretty neat for low power electronics.
Lev: They also mention that recent experiments on ferroelectric switching of certain vdW 3R-MoS2 and BN bilayers have shown ultrafast fatigue free switching over over one hundred billion cycles, suggesting this is experimentally feasible <ref:2503.09877#pg2>.
Kai: It sounds like they've connected the theoretical possibility with some real experimental demonstrations to show this isn't just abstract math.
Conclusion: Mira: Looking at the full title, "Two-dimensional antiferromagnets with non-relativistic spin splitting switchable by electric polarization," it really captures the essence of what they've done here.
Kai: Yeah, it's about taking this effect that is usually associated with ferromagnets and showing how stacking layers can make it switchable purely by an external voltage.
Lev: What this means for real hardware is that controlling this spin splitting without reversing the main magnetic order doesn't require big external torques like spin-transfer or spin-orbit torques.
Mira: It implies a path to potentially more energy efficient control methods for antiferromagnetic spintronics, which is where we need it most in devices.
Kai: And they found that this electric polarization switching of the nonrelativistic spin splitting can be robust with respect to spin-orbit coupling, which is a good thing because it makes the effect more reliable across different materials.
Lev: So for anyone building an AFM device, the implication is that you can design a system where you tune this momentum dependent spin polarization using voltage instead of relying on complex magnetic field manipulation.
Himanshu Mavani, Kai Huang, Kartik Samanta, Evgeny Y. Tsymbal
Department of Physics and Astronomy and Nebraska Center for Materials and Nanoscience, University of Nebraska
cond-mat.mtrl-sci, cond-mat.other
Submitted: 2025-03-12
Updated: 2025-03-12
Comments: 8 pages, 4 figures
Journal ref: Phys. Rev. B 112, L060401 (2025)
DOI: 10.1103/c4dm-12ng
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 87/100
The gist: Spin-split antiferromagnets have significance for antiferromagnetic (AFM) spintronics due to their momentum dependent spin polarization which can be exploited for the control and detection of the AFM…
Key concepts
- Nonrelativistic Spin Splitting (NRSS)
- In some antiferromagnets, the spin state splits based on momentum, even without spin-orbit coupling. This splitting can be controlled by external factors like electric polarization. It allows for phenomena usually seen in ferromagnets, such as spin currents.
- Altermagnetism
- This describes a specific type of non-relativistic spin splitting found in certain antiferromagnets where the two magnetic sublattices are connected by crystal rotational symmetries rather than simple translations. This symmetry allows for the alternating character of NRSS in momentum space.
- Polar Stacking Types
- The paper categorizes how layers stack based on their magnetic order. Type-I and Type-II involve AFM orders, while Type-III involves ferromagnetic monolayers coupled antiferromagnetically. These stacking arrangements determine whether the system exhibits altermagnetism or non-altermagnetism.
- Electric Polarization Switching
- This is the proposed mechanism where applying a voltage controls the NRSS state in the bilayer. This is contrasted with current-induced switching, which reverses the main AFM order. Electric switching is suggested as a more practical and energy-efficient method for device applications.
Terminology
Summary
Spin-split antiferromagnets have significance for antiferromagnetic (AFM) spintronics due to their momentum dependent spin polarization which can be exploited for the control and detection of the AFM order parameter. p. 0 Tsymbal*
Department of Physics and Astronomy & Nebraska Center for Materials and Nanoscience,
University of Nebraska, Lincoln, Nebraska 68588-0299, USA
ABSTRACT. Spin-split antiferromagnets have significance for antiferromagnetic (AFM) spintronics due to their momentum
dependent spin polarization which can be exploited for the control and detection of the AFM order parameter.Where the paper says it
Introduction to Nonrelativistic Spin Splitting
Antiferromagnetic (AFM) spintronics has recently emerged as a subfield of spintronics, where an AFM order parameter serves as a state variable. Due to being robust against magnetic perturbations, producing no stray fields, and exhibiting ultrafast spin dynamics, antiferromagnets can serve as functional materials for spintronic applications. p. 0 INTRODUCTION
Antiferromagnetic (AFM) spintronics has recently emerged as a
subfield of spintronics, where an AFM order parameter serves as
a state variable [ 1 ]. Due to being robust against magnetic
perturbations, producing no stray fields, and exhibiting ultrafast
spin dynamics, antiferromagnets can serve as functional
materials for spintronic applications [2]. Especially attractive are
AFM materials exhibiting nonrelativistic spin splitting (NRSS)
of their electronic band structure. In contrast to conventional
collinear antiferromagnets with spin-degenerate bands enforced
by 𝑃𝑃𝑃𝑃 or 𝑈𝑈𝑈𝑈 symmetries (where 𝑃𝑃 is space inversion, is time
reversal, 𝑈𝑈 is spin flip, and is lattice translation), NRSS
antiferromagnets break these symmetries producing momentumdependent spin polarization, even in the absence of spin-orbit
coupling (SOC) [3-5]. In contrast to conventional
collinear antiferromagnets with spin-degenerate bands enforced
by 𝑃𝑃𝑃𝑃 or 𝑈𝑈𝑈𝑈 symmetries (where 𝑃𝑃 is space inversion, is time
reversal, 𝑈𝑈 is spin flip, and is lattice translation), NRSS
antiferromagnets break these symmetries producing momentumdependent spin polarization, even in the absence of spin-orbit
coupling (SOC) [3-5]. Among collinear NRSS antiferromagnets
are those in which two opposite magnetic sublattices are
connected by proper or improper spatial rotations, now known
as altermagnets [ 6, 7], and those in which the two opposite
magnetic sublattices are not connected by any symmetry [8]. Among collinear NRSS antiferromagnets
are those in which two opposite magnetic sublattices are
connected by proper or improper spatial rotations, now known
as altermagnets [ 6, 7], and those in which the two opposite
magnetic sublattices are not connected by any symmetry [8]. Due to their momentum-dependent spin polarization, NRSS
antiferromagnets allow phenomena traditionally associated with
ferromagnets, such as spin-polarized currents [9,10], exchange
torques [11], anomalous Hall effects [12-14], spin filtering [15],
and magnetoresistive effects [ 16 - 19 ], which make them
appealing for spintronics.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Methodology for Calculations
First-principles calculations are performed using the Vienna ab initio Simulation Package (VASP). The projector augmented wave (PAW) method is employed to describe interactions between ions and valence electrons, and the Perdew–Burke–Ernzerhof (PBE) functional is used to treat the exchange-correlation energy. p. 1 METHODS
First-principles calculations are performed using the Vienna ab
initio Simulation Package (VASP) [ 48 ]. The projector
augmented wave (PAW) method is employed to describe
interactions between ions and valence electrons, and the
Perdew–Burke–Ernzerhof (PBE) functional is used to treat the
exchange-correlation energy [ 49 , 50 ]. The projector
augmented wave (PAW) method is employed to describe
interactions between ions and valence electrons, and the
Perdew–Burke–Ernzerhof (PBE) functional is used to treat the
exchange-correlation energy [ 49 , 50 ]. A plane-wave cutoff
energy of 500 eV and a 16×16×1 k-point mesh in the irreducible
Brillouin zone are used in the calculations. A plane-wave cutoff
energy of 500 eV and a 16×16×1 k-point mesh in the irreducible
Brillouin zone are used in the calculations. Atomic positions are
relaxed until the force on each atom is less than 2×10-3 eV/Å, and
self-consistency of electronic structure calculations is achieved
with tolerance of 10-7 eV. In the calculations of 2D systems,
periodically repeated slabs are separated by a vacuum layer of
more than 20 Å to avoid interactions between periodic images. Van der Waals interactions are included in the calculations using
the semiempirical DFT-D3 method [ 53 ]. Van der Waals interactions are included in the calculations using
the semiempirical DFT-D3 method [ 53 ]. The out-of-plane
electric polarization of polar-stacked bilayers is calculated using
the dipole correction method [54].Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Symmetry Analysis and Altermagnetism
To explore NRSS in bilayer antiferromagnets, the spin-space group approach where the spin and space degrees of freedom are decoupled is employed. In 2D collinear magnets, the spin degeneracy is also protected by CC2Mz or CC2CC2z symmetries (e. p. 1 Any
collinear magnet holds spin-only symmetry [𝐶𝐶̅
2|| ] (where 𝐶𝐶̅
2 is
twofold spin rotation perpendicular to the collinear spin axis, 𝐶𝐶2,
followed by spin inversion), which makes electronic bands at
momentum 𝒌𝒌 and −𝒌𝒌 to have the same energy 𝜀𝜀, as it transforms
𝜀𝜀(𝑠𝑠, 𝒌𝒌) to 𝜀𝜀(𝑠𝑠, −𝒌𝒌). In 3D conventional collinear magnets, the
spin degeneracy of electronic bands is protected by [𝐶𝐶2||𝐸𝐸�]
and/or [𝐶𝐶2|| ] symmetries (where 𝐸𝐸� is inversion). The spin-space group symmetry
operation is represented by [𝑅𝑅𝑠𝑠||𝑅𝑅𝑙𝑙], where the transformation
on left (right) of the double bar acts only on the spin (space). Any
collinear magnet holds spin-only symmetry [𝐶𝐶̅
2|| ] (where 𝐶𝐶̅
2 is
twofold spin rotation perpendicular to the collinear spin axis, 𝐶𝐶2,
followed by spin inversion), which makes electronic bands at
momentum 𝒌𝒌 and −𝒌𝒌 to have the same energy 𝜀𝜀, as it transforms
𝜀𝜀(𝑠𝑠, 𝒌𝒌) to 𝜀𝜀(𝑠𝑠, −𝒌𝒌). , [𝐶𝐶2||𝐶𝐶2𝑧𝑧][𝐶𝐶̅
2|| ]) transforms 𝜀𝜀(𝑠𝑠, 𝑘𝑘𝑥𝑥, 𝑘𝑘𝑦𝑦) to
𝜀𝜀(−𝑠𝑠, 𝑘𝑘𝑥𝑥, 𝑘𝑘𝑦𝑦)). Thus, to generate NRSS in a 2D antiferromagnet,
two magnetic sublattices cannot be connected by translation ,
inversion 𝐸𝐸�, mirror reflection 𝑀𝑀𝑧𝑧, or twofold rotation 𝐶𝐶2𝑧𝑧. Thus, to generate NRSS in a 2D antiferromagnet,
two magnetic sublattices cannot be connected by translation ,
inversion 𝐸𝐸�, mirror reflection 𝑀𝑀𝑧𝑧, or twofold rotation 𝐶𝐶2𝑧𝑧. In a
2D altermagnet, however, they can be swapped by other crystal
rotational symmetries (proper or improper), reflecting the
alternating character of NRSS in the reciprocal space.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Types of Polar Stacking and Polarization Switching
Polar stacking is categorized into three types based on the AFM order, which dictate whether NRSS is altermagnetic or non-altermagnetic.
-
Type-I polar stackings involve individual layers hosting an AFM order, where the top and bottom layers have the same magnetic order. p. 2
Where the paper says it
In type-I and type-II polar stackings, the individual layers of a bilayer host an AFM order. In the type-I stacking, the AFM order of the top layer is the same as that of the bottom layer (Figs.
-
Type-II polar stackings involve a magnetically reversed AFM order of the top layer. p. 2
Where the paper says it
In contrast, in the type-II stacking, the AFM order of the top layer is magnetically reversed (Figs. Type-III polar stacking consists of FM-ordered monolayers with AFM interlayer coupling, commonly known as an A-AFM order (Figs.
-
Type-III polar stacking consists of FM-ordered monolayers with AFM interlayer coupling, commonly known as an A-AFM order. p. 2
Where the paper says it
In contrast, in the type-II stacking, the AFM order of the top layer is magnetically reversed (Figs. Type-III polar stacking consists of FM-ordered monolayers with AFM interlayer coupling, commonly known as an A-AFM order (Figs.
For type-II and type-III stackings, the states with opposite electric polarization are related by [CC2Mz] symmetry which transforms E(s, kx, ky) to E(-s, kx, ky), resulting in a reversal of NRSS and flipping the uncompensated net magnetization. p. 2 For
the type-II and type-III stackings, due to the reversed AFM order
of the two layers, transformation of 𝐴𝐴𝐵𝐵� to 𝐵𝐵�𝐴𝐴 must include spinflip operation. As a result, the states with opposite electric
polarization are related by [𝐶𝐶2||𝑀𝑀𝑧𝑧] symmetry which transforms
𝜀𝜀(𝑠𝑠, 𝑘𝑘𝑥𝑥, 𝑘𝑘𝑦𝑦) to 𝜀𝜀(−𝑠𝑠, 𝑘𝑘𝑥𝑥, 𝑘𝑘𝑦𝑦), and hence reverses NRSS and flips
the uncompensated net magnetization.Where the paper says it
Experimental Relevance and Conclusion
The electric polarization switching of NRSS in polar AFM bilayers may be more practical for device applications than the current-induced Néel vector switching. The proposed approach is expected to be more energy-efficient than that based on switching the Néel vector by spin-transfer or spin-orbit torques. p. 4 It allows the control of NRSS without reversal
of the AFM Néel vector providing non-volatile performance
assured by the stability of the two electrically polarized states. The proposed approach is expected to be more energy-efficient
than that based on switching the Néel vector by spin-transfer or
spin-orbit torques [30]. We emphasize that these conclusions are
not limited to the vdW compounds considered in this work but
are applicable to other AFM-ordered vdW materials exhibiting
type-II or type-III stackings. Recent experiments on ferroelectric
switching of polar-stacked vdW 3R-MoS2 and BN bilayers have
demonstrated ultrafast fatigue-free ferroelectric switching over
1011 cycles [76-78]. Recent experiments on ferroelectric
switching of polar-stacked vdW 3R-MoS2 and BN bilayers have
demonstrated ultrafast fatigue-free ferroelectric switching over
1011 cycles [76-78]. Thus, electric polarization switching of the
proposed polar-stacked NRSS AFM bilayers is feasible
experimentally providing a promising platform for low-power
spintronics.Where the paper says it
Where the paper says it
Where the paper says it
Key Findings on NRSS Characteristics
The study demonstrates that polar-stacked AFM bilayers exhibit NRSS which can have either altermagnetic (types I and II) or non-altermagnetic (type III) origins. Both support a reversible NRSS (types II and III) driven by electric polarization switching of the bilayer. p. 4 CONCLUSIONS
Overall, our results demonstrate that polar-stacked AFM bilayers
exhibit NRSS which can have either altermagnetic (types I and
II) or non-altermagnetic (type III) origins. Both support a
reversable NRSS (types II and III) driven by electric polarization
switching of the bilayer. Both support a
reversable NRSS (types II and III) driven by electric polarization
switching of the bilayer. These results are robust with respect to
SOC (Sec. 24 meV, and is pointing in opposite directions
for states 𝐴𝐴𝐵𝐵� and 𝐵𝐵�𝐴𝐴. The spin-space group of the polar ground
states includes symmetry [𝐸𝐸||𝐶𝐶3𝑧𝑧], which, when combined with
[𝐶𝐶̅
2|| ] , results in [𝐸𝐸||𝐶𝐶6𝑧𝑧] , indicating sixfold rotational
symmetry of the spin-polarized band structure.Where the paper says it
Where the paper says it
Where the paper says it
Device Application Potential
Switching of the NRSS by voltage, rather than by electric current, is beneficial for AFM spintronics. This allows the control of NRSS without reversal of the AFM Néel vector providing non-volatile performance assured by the stability of the two electrically polarized states. p. 4 Switching of the
NRSS by voltage, rather than by electric current, is beneficial for
AFM spintronics. It allows the control of NRSS without reversal
of the AFM Néel vector providing non-volatile performance
assured by the stability of the two electrically polarized states. It allows the control of NRSS without reversal
of the AFM Néel vector providing non-volatile performance
assured by the stability of the two electrically polarized states. The proposed approach is expected to be more energy-efficient
than that based on switching the Néel vector by spin-transfer or
spin-orbit torques [30].Where the paper says it
Where the paper says it
Material Specific Results
For type-I polar stackings of MnPSe3, the ground states AAB and BBA are related by mirror symmetry Mz and produce electric polarization of 0.031 pC/m along +zz and -zz direction. The spin-space group of the polar ground states holds symmetries [E||E] and [CC2||Myy], making the states AAB and BBA altermagnetic. This leads to d-wave altermagnetism in the polar-stacked MnPSe3 bilayer. p. 3 Type-II polar-stacked AFM bilayer
The spin-space group of the type-II polar stacking involves the
same symmetry operations, [𝐸𝐸||𝐸𝐸] and [𝐶𝐶2||𝑀𝑀𝑦𝑦], as the type-I
stacking. Thus, any type-II polar-stacked MPX3 bilayer with
intralayer Néel AFM order exhibits d-wave altermagnetism.Where the paper says it
Comparison of Stacking Types
Type-II polar stacking of strained MnPS3 bilayer forms states AAB and BBA, which are related by [CC2Mz] symmetry transforming E(s, kx, ky) to E(-s, kx, ky). As a result, these states have an opposite NRSS (Figs 3e, f), meaning reversing electric polarization flips the NRSS sign while preserving the Néel vector. p. 4 As a result, these
states have an opposite NRSS (Figs, 3(e,f)). Thus, reversing
electric polarization of the MnPS3 bilayer flips the NRSS sign,
while preserving the Néel vector. 5
Figures 3(c, d) show the calculated band structures of the
𝐴𝐴𝐵𝐵� - and 𝐵𝐵�𝐴𝐴-stacked MnPS3 bilayers exposed to 5% biaxial
tensile strain. We find that the dipole moment of the strained
MnPS3 bilayer is about 0. We find that the dipole moment of the strained
MnPS3 bilayer is about 0. 27 pC/m, which is much larger than
that of MnPSe3 [55].Where the paper says it
Where the paper says it
Where the paper says it
Conclusion on Switching Mechanism
The electric polarization switching of NRSS in polar AFM bilayers may be more practical for device applications than the current-induced Néel vector switching. This approach is interesting because it allows the control of NRSS without the reversal of the AFM Néel vector and hence is expected to be less power-demanding. p. 0 Recently, the electric-field-induced NRSS has been proposed,
where NRSS emerges due to applied electric field breaking
inversion symmetry [ 32 , 33 ]. This approach is interesting
because it allows the control of NRSS without the reversal of the
AFM Néel vector and hence it is expected to be less power
demanding. The proposed approach is expected to be more energy-efficient
than that based on switching the Néel vector by spin-transfer or
spin-orbit torques [30]. We emphasize that these conclusions are
not limited to the vdW compounds considered in this work but
are applicable to other AFM-ordered vdW materials exhibiting
type-II or type-III stackings.Where the paper says it
Where the paper says it
Acknowledgments
This work was primarily supported by the grant number DESC0023140 funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences (H. p. 4 ACKNOWLEDGMENTS
This work was primarily supported by the grant number DESC0023140 funded by the U. Department of Energy, Office of
Science, Basic Energy Sciences (H. Department of Energy, Office of
Science, Basic Energy Sciences (H. Partial
support from the National Science Foundation through the
EPSCoR RII Track-1 program (NSF Award OIA-2044049) and
from the UNL Grand Challenges catalyst award “Quantum
Approaches Addressing Global Threats” (K. Partial
support from the National Science Foundation through the
EPSCoR RII Track-1 program (NSF Award OIA-2044049) and
from the UNL Grand Challenges catalyst award “Quantum
Approaches Addressing Global Threats” (K. )
is acknowledged. )
is acknowledged. Computations were performed at the
University of Nebraska Holland Computing Center.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved AI system can predict which type of NRSS, altermagnetic (types I and II) or non-altermagnetic (type III), will emerge based on a given polar stacking configuration of 2D van der Waals materials. This allows for the selection of materials with desired spin splitting properties without extensive experimental synthesis.
-
Improved AI system can determine the necessary symmetry requirements for NRSS to be switchable by electric polarization, such as
elucidate symmetry requirements for NRSS to be switchable by electric polarization.
This helps in designing novel material structures that enable voltage-driven control of spin states. -
Improved AI system can evaluate the practicality of switching mechanisms, arguing that
the electric polarization switching of NRSS in polar AFM bilayers may be more practical for device applications than the current-induced Néel vector switching.
This provides a predictive framework for choosing energy-efficient methods for controlling AFM order parameters in spintronic devices. -
Improved AI system can identify representative 2D AFM materials exhibiting different types of NRSS based on their spin-space group approach analysis. This capability streamlines the search for new materials with specific momentum-dependent spin polarization characteristics.
Abstract
Spin-split antiferromagnets have significance for antiferromagnetic (AFM) spintronics due to their momentum dependent spin polarization which can be exploited for the control and detection of the AFM order parameter. Here, we explore the polar-layer stacking of AFM-ordered bilayers driving the emergence of reversable electric polarization and non-relativistic spin splitting (NRSS) of their band structure. Based on the spin-space group approach, we identify several representative two-dimensional AFM materials which exhibit different types of NRSS when stacked into a polar bilayer. We demonstrate that NRSS can have both altermagnetic and non-altermagnetic origins and elucidate symmetry requirements for NRSS to be switchable by electric polarization. We argue that the electric polarization switching of NRSS in polar AFM bilayers may be more practical for device applications than the current-induced Néel vector switching.
Sources
- All-Electrical Layer-Spintronics in Altermagnetic Bilayer
- Induced Monolayer Altermagnetism in MnP(S,Se)$_3$ and FeSe
Related papers
- Structural contribution to light-induced gap suppression in Ta 2 NiSe 5
- Anatomy of fast current-induced skyrmion motion in synthetic antiferromagnets
- Magnetic control of an exciton-polariton condensate in a van der Waals magnet
- High-pressure elastic properties of GeO2 polymorphs up to 120 GPa
- Decoupling Strain-Rate Sensitivity and Deformation Length Scale Effects in Neutron-Irradiated Tungsten: A Coupled Nano-Indentation, HR-EBSD and Crystal Plasticity Study
- Magnetism modulation in Co3Sn2S2 by current-assisted domain wall motion