DABI: Evaluation of Data Augmentation Methods Using Downsampling in Bilateral Control-Based Imitation Learning with Images
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.
Rosa: I'm Rosa.
Dev: And I'm Dev, here with Taro.
Rosa: We're looking at the paper: "DABI: Evaluation of Data Augmentation Methods Using Downsampling in Bilateral Control-Based Imitation Learning with Images".
Title and authors: Rosa: We just talked about the setup of DABI and the core idea behind it, which is using data collected at different rates to create a richer dataset for bilateral control-based imitation learning. Now let’s look at what the paper actually summarizes as its main findings.
Dev: The summary explains that they focused on collecting five demonstration datasets using bilateral control and training a Bi-ACT model with three variations involving these different data augmentation methods > Page two <ref:2410.04370#pg1>.
Rosa: And the key finding they highlight is that differences in these specific augmentation methods, following the downsampling, lead to variations in task success rates when using bilateral control > Page two <ref:2410.04370#pg1>.
Dev: They also conducted real-world experiments on putting items in a drawer and found that DABI achieved the highest success rate across all objects and stages > Page two <ref:2410.04370#pg1>.
Taro: It sounds like the summary is emphasizing that it’s not just about collecting more data; it’s about figuring out the best way to process that data so the learning actually works better for a coordinated system > Page two <ref:2410.04370#pg1>.
Rosa: Exactly. They are showing that by changing how you augment based on those downsampling cycles, you directly change how well the robot executes complex movements in bilateral control > Page two <ref:2410.04370#pg1>.
Dev: So, DABI is presented as the proposed data augmentation method for bilateral control-based imitation learning with images, which shows this specific approach in Figure one > Page one <ref:2410.04370#pg2,data augmentation method for bilateral control-based imitation learning with images>.
Taro: It’s telling us that for this kind of system, the way you handle data mismatch is a critical variable that impacts performance, not just a technical detail > Page two <ref:2410.04370#pg1>.
Rosa: That’s the implication: synchronizing those robot and image data streams properly through augmentation is central to getting good imitation learning results here > Page one <ref:2410.04370#pg2>.
The paper's summary: Dev: Now let’s talk about what the authors themselves suggest as improvements to this work, because research isn't just about what they found, but also where they think we should go next.
Rosa: They suggest that instead of just relying on timestamps for their augmentation, they should use a method based on equidistant robot data before and after the image as a starting point for data augmentation > Page three.
Dev: That sounds like moving away from matching exact time markers and towards using the physical relationship between what the robot is doing and what the camera sees to generate the augmented data > Page three.
Taro: If they do that, it could mean that their learning system becomes more robust because it’s based on a structural alignment rather than just temporal alignment > Page three.
Rosa: That’s exactly it. This approach should ensure the augmented data is used for learning in Bi-ACT, which incorporates both position and force control > Page three.
Dev: So, the improvement they propose is to use this structural alignment as a foundation for augmentation, instead of just relying on timestamps to align the different data acquisition cycles > Page three.
Taro: It seems like they are addressing a fundamental way the data is being paired up, which could lead to much more stable performance in dynamic environments > Page three.
Rosa: That's what they’re aiming for: a method that ensures the augmented data is used for learning in Bi-ACT, which incorporates both position and force control > Page three.
The paper's improvements: Dev: So wrapping up, we’ve seen how DABI addresses the data mismatch by collecting high-frequency robot data and using image data to create a larger dataset for bilateral control imitation learning > Page one <ref:2410.04370#pg2>.
Rosa: And the key result is that this approach achieved a consistent one hundred percent success rate across all objects and stages in their real-world tests on the Put-in-Drawer task > Page two <ref:2410.04370#pg1>.
Taro: That’s a strong result, especially since they tested it on both trained and untrained objects, showing improved adaptability and robust handling capabilities > Page two <ref:2410.04370#pg1>.
Dev: The paper confirms a significant improvement in success rates compared to the other methodologies they tested like downsampling alone or downsampling with augmentation > Page two <ref:2410.04370#pg1>.
Rosa: So the overall implication is that this approach is effective for building richer learning datasets when dealing with synchronization issues in these kinds of setups > Page one <ref:2410.04370#pg2>.
Dev: The effectiveness was confirmed through real-world experiments, proving it works beyond just theoretical simulations > Page two <ref:2410.04370#pg1>.
Taro: Even though they only tested the Put-in-Drawer task, it shows a clear path for using this method to test on a wider range of tasks in the future > Page two <ref:2410.04370#pg1>.
Rosa: So, DABI is a data augmentation method for bilateral control-based imitation learning with images that significantly improves success rates in practice > Page one <ref:2410.04370#pg2,data augmentation method for bilateral control-based imitation learning with images>.
Dev: It’s a solid contribution to showing how data augmentation can be used strategically to solve the synchronization hurdles in complex robotics tasks > Page one <ref:2410.04370#pg2>.
Conclusion: Rosa: So, to wrap up, this paper introduces DABI: Evaluation of Data Augmentation Methods Using Downsampling in Bilateral Control-Based Imitation Learning with Images. It shows that by collecting robot joint angles and velocities at one thousand Hertz and pairing them with images from a gripper or environment camera at one hundred Hertz, you can get a ten times increase in data for training.
Dev: And the core idea is that they assume the robot movements and the image captures are happening together because they are recorded at fixed intervals. So they define robot data collected between image cycles, which they call N, and then pair that robot data symmetrically around each image, expanding it by N plus one times ceiling and floor functions to adjust the size properly.
Taro: It’s interesting how they handle the mismatch in frequencies. Usually you downsample everything to match the lowest frequency for imitation learning, but this method tries to keep them synchronized by building pairs around the image acquisition cycle.
Rosa: That synchronization is what makes it useful for bilateral control systems like Bi-ACT, which handles both position and force control simultaneously. The main result they highlighted is that DABI showed superior performance in their Put-in-Drawer task with a consistent one hundred percent success rate across all objects and stages.
Dev: I noticed the results were good because it worked for both trained and untrained objects, meaning the robot gained more adaptability when facing new things than other methods they tested. That suggests the data augmentation actually helped generalize the learning process.
Taro: That one hundred percent success rate across different objects is pretty impressive in a real-world setting, especially when you think about how hard it is to get that kind of precision in manipulation. But I wonder about the limitations, since they only tested this on the Put-in-Drawer task.
Rosa: Yeah, that's true. They mentioned they plan to run experiments on a wider range of tasks in the future, but for now it’s just showing how effective this data augmentation technique is for improving success rates in imitation learning.
Dev: Exactly. The real world tests are important, but the core finding here is about creating a richer learning dataset while maintaining that synchronization between the robot data and image data streams across different acquisition cycles.
Taro: It’s a strong way to think about it—it’s not just collecting more raw data; it’s structuring that data in a way that helps the learning system understand the relationship between what it does and what it sees.
Rosa: So, DABI is presented as a very practical method for handling those synchronization issues when you need to train robots using both motion and vision inputs. It really confirms that the way you pair up your data has a big impact on how well the robot learns to interact with the world.
Dev: It’s a solid contribution to showing how strategic data augmentation can solve synchronization hurdles in complex robotics tasks, especially when you're dealing with different sampling rates for motion and vision sensors.
Taro: We’ve seen how important it is to structure that data before feeding it into the learning model. Next up, we’ll look at a paper on continuity-aware priors and temporal structure in expert demonstrations.
Masato Kobayashi, Thanpimon Buamanee, Yuki Uranishi
Cybermedia Center, Osaka University · Graduate School of Information Science and Technology, Osaka University
cs.RO
Submitted: 2024-10-06
Updated: 2024-10-06
Journal ref: IEEE International Conference on Robotics and Automation (ICRA), Atlanta, GA, USA, 2025, pp. 16892-16898
DOI: 10.1109/ICRA55743.2025.11128686
Project page: https://mertcookimg.github.io/dabi
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 85/100
The gist: Autonomous robot manipulation is a complex and continuously evolving robotics field <ref:2410.04370#pg2> This paper proposes the Data Augmentation Method for Bilateral Control-Based Imitation…
Key concepts
- DABI (Data Augmentation Method for Bilateral Control Imitation Learning with Images)
- DABI is a technique that boosts the amount of training data by pairing robot joint data (angles, velocities, torques) collected at 1000 Hz with images from cameras captured at 100 Hz. It works by creating robot data pairs symmetrically around image acquisition cycles to expand the dataset tenfold while maintaining synchronization between the two different frequencies.
- Bilateral Control-Based Imitation Learning
- This is a learning approach where an autonomous robot learns to perform tasks by receiving guidance from both position/force control signals and visual inputs. The system uses bilateral control, meaning it learns from both physical interaction data (like joint torques) and visual information simultaneously to improve its manipulation skills.
- Data Augmentation
- Data augmentation is a process used to artificially increase the size and diversity of a training dataset without collecting new real-world data. In this context, DABI uses the synchronized robot and image data to create synthetic, yet realistic, variations of the existing data, making the learning model more robust.
- Put-in-Drawer Task
- This is a specific manipulation task used in experiments where a robot must successfully place an object into a drawer. This task was used to test DABI's performance. Achieving a 100% success rate across different objects and stages shows the robot's improved ability to handle diverse items.
Terminology
Summary
Autonomous robot manipulation is a complex and continuously evolving robotics field <ref:2410. p. 004370#pg2> This paper proposes the Data Augmentation Method for Bilateral Control-Based Imitation Learning with Images, called ”DABI” <ref:2410. p. 004370#pg3> DABI collects robot joint angles, velocities, and torques at 1000 Hz, and uses images from gripper and environmental cameras captured at 100 Hz as the basis for data augmentation <ref:2410. p. 004370#pg6> This enables a tenfold increase in data. p. 0
Methodology Overview
DABI is designed to collect robot joint angles, velocities, and torques at 1000 Hz, and uses images from gripper and environmental cameras captured at 100 Hz as the basis for data augmentation The core idea of DABI is that it assumes that the robot data and image data are synchronized and acquired at a fixed interval It defines a set of robot data collected between the cycles of image acquisition as N Using this N, DABI forms pairs of robot data symmetrically around the image and can expand the data by N + 1 times Ceiling and floor functions are used to properly adjust the amount of data in DABI.
Data Augmentation Process
The augmentation process involves creating richer learning datasets while maintaining synchronization between data acquired at different cycles Robot operation data and image data are usually recorded at different acquisition cycles, so it is common in imitation learning to downsample other data to match the lower frequency In this study, we propose a new data augmentation method called DABI (Data Augmentation for Bilateral Control Imitation Learning) and apply it to an imitation learning system based on bilateral control, named ”Bi-ACT” This method assumes that the robot data and image data are synchronized and acquired at a fixed interval.
Experimental Setup
Experiments were conducted using the OpenMANIPULATOR-X robotic arm by ROBOTIS, featuring 4 Degrees of Freedom (DOF), enabling movement in multiple directions, and an additional DOF for the gripper The control cycle was set to 1000Hz for precise movement. In the environment setup, two robotic units, the leader and the follower, were positioned adjacent to each other as shown in Fig. p. 3 7 We evaluated DABI’s performance on the manipulation task: Put-in-Drawer. p. 3
Experimental Results
The results of our experimental evaluations performed on the Put-in-Drawer task using three different methodologies: downsampling(Method1), downsampling with augmentation(Method2), and DABI(Method3) The DABI method demonstrated superior performance with a consistent 100% success rate across all objects and stages This method proved highly effective not only for trained but also for untrained objects, showcasing the robot’s improved adaptability and robust handling capabilities. The results confirmed a significant improvement in success rates, thereby proving the effectiveness of DABI. p. 0
Conclusion
This paper proposed the data augmentation method for imitation learning called ”DABI: Data Augmentation Method for Bilateral Control-Based Imitation Learning with Images” DABI collected robot joint angles, velocities, and torques at 1000 Hz, and used images from gripper and environmental cameras captured at 100 Hz as the basis for data augmentation The results confirmed a significant improvement in success rates. The effectiveness of this approach was confirmed through real-world experiments. p. 4 Even though the experiments used different objects, they were only tested on the Put-in-Drawer task In the future, we will run experiments on a wider range of tasks For data augmentation, we used floor and ceiling functions However, we plan to compare this method with one that matches the closest timestamps between image and robot data. p. 4
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Data Augmentation for Bilateral Control Based Imitation Learning with Images (DABI) can achieve a tenfold increase in data by collecting robot joint angles, velocities, and torques at 1000 Hz and using images from gripper and environmental cameras at 100 Hz as the basis for augmentation. This method allows for the creation of a richer learning dataset while maintaining synchronization between data acquired at different cycles.
-
The improved system can learn complex manipulation tasks like Put-in-Drawer with a consistent 100 percent success rate across all objects and stages, including both trained and untrained items, demonstrating improved adaptability and robust handling capabilities compared to other methods.
-
The system can handle diverse objects more effectively because the DABI method uses
equidistant robot data before and after the image as a starting point for data augmentation
rather than relying on timestamps. This approach ensures that the augmented data is used for learning in Bi-ACT, which incorporates both position and force control.
Sources
- Learning Fine-Grained Bimanual Manipulation with Low-Cost Hardware
- Mobile ALOHA: Learning Bimanual Mobile Manipulation with Low-Cost Whole-Body Teleoperation
- GELLO: A General, Low-Cost, and Intuitive Teleoperation Framework for Robot Manipulators
- Utilizing Multiple Testing for Grouping in Singular Spectrum Analysis
- Scaling Robot Learning with Semantically Imagined Experience
Related papers
- Rethinking Actions: Continuity-Aware Priors for World-Model Planning
- MOSAIC: Modular Obstacle and Spatial-Aware Framework for Manipulation In Cluttered Scenes
- SAGAS: Semantic-Aware Graph-Assisted Stitching for Offline Temporal Logic Planning
- DexSeed: Expanding Human Hand-Object Interactions into Robot Demonstrations for Dexterous Policy Learning
- LaST0.5: A Generalist World Action Model with Interaction-Centric Latent Reasoning
- CIALLO: Learning Shared Intent Representations for Cross-Embodiment Manipulation