DABI: Evaluation of Data Augmentation Methods Using Downsampling in Bilateral Control-Based Imitation Learning with Images
summary
The gist
Autonomous robot manipulation is a complex and continuously evolving robotics field <ref:2410.04370#pg2> This paper proposes the Data Augmentation Method for Bilateral Control-Based Imitation…
In short
The DABI method was proposed to significantly increase data for bilateral control imitation learning by combining high-frequency robot sensor data (1000 Hz) with lower-frequency image data (100 Hz). By assuming synchronization, DABI creates a rich dataset, leading to superior performance in the Put-in-Drawer task with a consistent 100% success rate across various objects. This proves DABI's effectiveness for building more adaptable robot systems.
Key concepts
- DABI (Data Augmentation Method for Bilateral Control Imitation Learning with Images)
- DABI is a technique that boosts the amount of training data by pairing robot joint data (angles, velocities, torques) collected at 1000 Hz with images from cameras captured at 100 Hz. It works by creating robot data pairs symmetrically around image acquisition cycles to expand the dataset tenfold while maintaining synchronization between the two different frequencies.
- Bilateral Control-Based Imitation Learning
- This is a learning approach where an autonomous robot learns to perform tasks by receiving guidance from both position/force control signals and visual inputs. The system uses bilateral control, meaning it learns from both physical interaction data (like joint torques) and visual information simultaneously to improve its manipulation skills.
- Data Augmentation
- Data augmentation is a process used to artificially increase the size and diversity of a training dataset without collecting new real-world data. In this context, DABI uses the synchronized robot and image data to create synthetic, yet realistic, variations of the existing data, making the learning model more robust.
- Put-in-Drawer Task
- This is a specific manipulation task used in experiments where a robot must successfully place an object into a drawer. This task was used to test DABI's performance. Achieving a 100% success rate across different objects and stages shows the robot's improved ability to handle diverse items.
Terminology used across episodes
This episode discusses
- DABI: Evaluation of Data Augmentation Methods Using Downsampling in Bilateral Control-Based Imitation Learning with Images · Paper Radio
- Learning Fine-Grained Bimanual Manipulation with Low-Cost Hardware
- Mobile ALOHA: Learning Bimanual Mobile Manipulation with Low-Cost Whole-Body Teleoperation
- GELLO: A General, Low-Cost, and Intuitive Teleoperation Framework for Robot Manipulators
- Utilizing Multiple Testing for Grouping in Singular Spectrum Analysis
- Scaling Robot Learning with Semantically Imagined Experience
The paper
DABI: Evaluation of Data Augmentation Methods Using Downsampling in Bilateral Control-Based Imitation Learning with Images · Read on arXiv
Masato Kobayashi, Thanpimon Buamanee, Yuki Uranishi
Cybermedia Center, Osaka University · Graduate School of Information Science and Technology, Osaka University
DOI: 10.1109/ICRA55743.2025.11128686
Transcript
Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.
Rosa: I'm Rosa.
Dev: And I'm Dev, here with Taro.
Rosa: We're looking at the paper: "DABI: Evaluation of Data Augmentation Methods Using Downsampling in Bilateral Control-Based Imitation Learning with Images".
Title and authors: Rosa: We just talked about the setup of DABI and the core idea behind it, which is using data collected at different rates to create a richer dataset for bilateral control-based imitation learning. Now let’s look at what the paper actually summarizes as its main findings.
Dev: The summary explains that they focused on collecting five demonstration datasets using bilateral control and training a Bi-ACT model with three variations involving these different data augmentation methods > Page two <ref:2410.04370#pg1>.
Rosa: And the key finding they highlight is that differences in these specific augmentation methods, following the downsampling, lead to variations in task success rates when using bilateral control > Page two <ref:2410.04370#pg1>.
Dev: They also conducted real-world experiments on putting items in a drawer and found that DABI achieved the highest success rate across all objects and stages > Page two <ref:2410.04370#pg1>.
Taro: It sounds like the summary is emphasizing that it’s not just about collecting more data; it’s about figuring out the best way to process that data so the learning actually works better for a coordinated system > Page two <ref:2410.04370#pg1>.
Rosa: Exactly. They are showing that by changing how you augment based on those downsampling cycles, you directly change how well the robot executes complex movements in bilateral control > Page two <ref:2410.04370#pg1>.
Dev: So, DABI is presented as the proposed data augmentation method for bilateral control-based imitation learning with images, which shows this specific approach in Figure one > Page one <ref:2410.04370#pg2,data augmentation method for bilateral control-based imitation learning with images>.
Taro: It’s telling us that for this kind of system, the way you handle data mismatch is a critical variable that impacts performance, not just a technical detail > Page two <ref:2410.04370#pg1>.
Rosa: That’s the implication: synchronizing those robot and image data streams properly through augmentation is central to getting good imitation learning results here > Page one <ref:2410.04370#pg2>.
The paper's summary: Dev: Now let’s talk about what the authors themselves suggest as improvements to this work, because research isn't just about what they found, but also where they think we should go next.
Rosa: They suggest that instead of just relying on timestamps for their augmentation, they should use a method based on equidistant robot data before and after the image as a starting point for data augmentation > Page three.
Dev: That sounds like moving away from matching exact time markers and towards using the physical relationship between what the robot is doing and what the camera sees to generate the augmented data > Page three.
Taro: If they do that, it could mean that their learning system becomes more robust because it’s based on a structural alignment rather than just temporal alignment > Page three.
Rosa: That’s exactly it. This approach should ensure the augmented data is used for learning in Bi-ACT, which incorporates both position and force control > Page three.
Dev: So, the improvement they propose is to use this structural alignment as a foundation for augmentation, instead of just relying on timestamps to align the different data acquisition cycles > Page three.
Taro: It seems like they are addressing a fundamental way the data is being paired up, which could lead to much more stable performance in dynamic environments > Page three.
Rosa: That's what they’re aiming for: a method that ensures the augmented data is used for learning in Bi-ACT, which incorporates both position and force control > Page three.
The paper's improvements: Dev: So wrapping up, we’ve seen how DABI addresses the data mismatch by collecting high-frequency robot data and using image data to create a larger dataset for bilateral control imitation learning > Page one <ref:2410.04370#pg2>.
Rosa: And the key result is that this approach achieved a consistent one hundred percent success rate across all objects and stages in their real-world tests on the Put-in-Drawer task > Page two <ref:2410.04370#pg1>.
Taro: That’s a strong result, especially since they tested it on both trained and untrained objects, showing improved adaptability and robust handling capabilities > Page two <ref:2410.04370#pg1>.
Dev: The paper confirms a significant improvement in success rates compared to the other methodologies they tested like downsampling alone or downsampling with augmentation > Page two <ref:2410.04370#pg1>.
Rosa: So the overall implication is that this approach is effective for building richer learning datasets when dealing with synchronization issues in these kinds of setups > Page one <ref:2410.04370#pg2>.
Dev: The effectiveness was confirmed through real-world experiments, proving it works beyond just theoretical simulations > Page two <ref:2410.04370#pg1>.
Taro: Even though they only tested the Put-in-Drawer task, it shows a clear path for using this method to test on a wider range of tasks in the future > Page two <ref:2410.04370#pg1>.
Rosa: So, DABI is a data augmentation method for bilateral control-based imitation learning with images that significantly improves success rates in practice > Page one <ref:2410.04370#pg2,data augmentation method for bilateral control-based imitation learning with images>.
Dev: It’s a solid contribution to showing how data augmentation can be used strategically to solve the synchronization hurdles in complex robotics tasks > Page one <ref:2410.04370#pg2>.
Conclusion: Rosa: So, to wrap up, this paper introduces DABI: Evaluation of Data Augmentation Methods Using Downsampling in Bilateral Control-Based Imitation Learning with Images. It shows that by collecting robot joint angles and velocities at one thousand Hertz and pairing them with images from a gripper or environment camera at one hundred Hertz, you can get a ten times increase in data for training.
Dev: And the core idea is that they assume the robot movements and the image captures are happening together because they are recorded at fixed intervals. So they define robot data collected between image cycles, which they call N, and then pair that robot data symmetrically around each image, expanding it by N plus one times ceiling and floor functions to adjust the size properly.
Taro: It’s interesting how they handle the mismatch in frequencies. Usually you downsample everything to match the lowest frequency for imitation learning, but this method tries to keep them synchronized by building pairs around the image acquisition cycle.
Rosa: That synchronization is what makes it useful for bilateral control systems like Bi-ACT, which handles both position and force control simultaneously. The main result they highlighted is that DABI showed superior performance in their Put-in-Drawer task with a consistent one hundred percent success rate across all objects and stages.
Dev: I noticed the results were good because it worked for both trained and untrained objects, meaning the robot gained more adaptability when facing new things than other methods they tested. That suggests the data augmentation actually helped generalize the learning process.
Taro: That one hundred percent success rate across different objects is pretty impressive in a real-world setting, especially when you think about how hard it is to get that kind of precision in manipulation. But I wonder about the limitations, since they only tested this on the Put-in-Drawer task.
Rosa: Yeah, that's true. They mentioned they plan to run experiments on a wider range of tasks in the future, but for now it’s just showing how effective this data augmentation technique is for improving success rates in imitation learning.
Dev: Exactly. The real world tests are important, but the core finding here is about creating a richer learning dataset while maintaining that synchronization between the robot data and image data streams across different acquisition cycles.
Taro: It’s a strong way to think about it—it’s not just collecting more raw data; it’s structuring that data in a way that helps the learning system understand the relationship between what it does and what it sees.
Rosa: So, DABI is presented as a very practical method for handling those synchronization issues when you need to train robots using both motion and vision inputs. It really confirms that the way you pair up your data has a big impact on how well the robot learns to interact with the world.
Dev: It’s a solid contribution to showing how strategic data augmentation can solve synchronization hurdles in complex robotics tasks, especially when you're dealing with different sampling rates for motion and vision sensors.
Taro: We’ve seen how important it is to structure that data before feeding it into the learning model. Next up, we’ll look at a paper on continuity-aware priors and temporal structure in expert demonstrations.
More episodes
- 2608.13438-ContactGuard: Pre-Contact Execution Monitoring with Action-Conditioned Latent World Models
- 2610.34593-Future Prediction as Training-Only Video Supervision for Pretrained VLA Policies
- 2610.35385-EmbodiedLab: Beyond Manipulation, Benchmarking Embodied Agents That Act to Know
- 2610.36378-Data-Driven Hamiltonian for Neural Optimal Control
- 2610.37275-A Heuristic for Scheduling Autonomous Vehicles at Intersections
- 2610.37288-Dynamic Coordination of Autonomous Vehicles at Intersections
- 2610.37632-Real-Time Coordination of Autonomous Vehicles at Intersections
- 2611.13779-Softness is something you also need! Why compliance helps control: information metrics of a passive walker with compliant ankle
- 2611.13411-Residual-Corrected Physics-Informed Neural Network KKL Observers with Input-to-State Stability Guarantees
- 2611.14488-Is Your Robot's Memory Just a Clock? Temporal Shortcuts in Memory-Augmented VLA Policies