Formation of martensitic microstructure in epitaxial Ni-Mn-Ga films after fast cooling

arXiv:2409.20226 · cond-mat.mtrl-sci · Submitted 2024-09-30 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: We're looking at the paper: "Formation of martensitic microstructure in epitaxial Ni-Mn-Ga films after fast cooling".

Mira: Here's the gist of the paper. Shape memory alloys can be used in various applications such as high stroke actuation, energy-efficient ferroic cooling, and energy harvesting This article uses an epitaxial Ni-Mn-Ga film as a model system to study the formation of the martensitic microstructure after fast heating and cooling Substantial differences compared to slow cooling occur, which we attribute to the limited time available for the microstructure to form and to the thermal stress between film and substrate during rapid temperature changes.

Kai: Model System and Methodology The study employs an epitaxial Ni-Mn-Ga film as a model system because it exhibits a well-ordered hierarchical martensitic microstructure in its as-deposited state The researchers applied a millisecond flash lamp pulse of varying energy density on the Ni-Mn-Ga film and analyzed the hierarchical martensitic microstructure afterwards.

Mira: They used complementary methods such as reciprocal space mapping (RSM), focused ion beam (FIB) cross-sectioning with scanning electron microscopy (SEM), and scanning transmission electron microscopy ((S)TEM) with spectrum imaging analysis based on energy-dispersive x-ray spectroscopy (EDX) to quantify changes of the martensitic microstructure by FLA for different types of twinning.

Kai: Microstructure Hierarchy and Evolution The martensitic microstructure in the as-deposited state is described as having five levels of twinning, ranging from the nano- to the macroscopic scale This hierarchy includes tetragonal non-modulated martensite (NM) at level 0, modulated martensites (MM) at level 1, laminates forming nuclei at level 3, and macroscopic twin boundaries (TB) at level 5.

Title and authors: Kai: So today we're looking at this paper titled "Formation of martensitic microstructure in epitaxial Ni-Mn-Ga films after fast cooling." It’s about how quickly things form when you heat and cool these shape memory alloys really fast.

Mira: Right, it focuses on using an epitaxial Ni-Mn-Ga film as a model system to study that microstructure formation after a fast heating and cooling cycle. The authors are interested in understanding what happens when we move away from slow cooling methods.

Lev: From an engineering standpoint, that's important because high cycle frequency is essential for applications like energy efficient ferroic cooling or waste energy harvesting, which rely on these reversible martensitic transformations one <ref:2409.20226#pg1,high cycle frequency is essential for>.

Kai: Exactly. And the paper points out that the differences you see when you cool fast are due to two main things: the limited time available for the microstructure to form and the thermal stress between that film and its substrate during those rapid temperature changes.

Mira: That limited time aspect is key because it directly impacts how much of a certain structure we end up with compared to slow cooling. The authors use a five hundred nanometer thick Ni-Mn-Ga film grown on a single crystalline MgO substrate, taking the as deposited microstructure as their reference state sixteen-eighteen <ref:2409.20226#pg3>.

Lev: And they used these complementary methods, like reciprocal space mapping, and focused ion beam cross sectioning with scanning electron microscopy, and also scanning transmission electron microscopy with spectrum imaging analysis based on energy dispersive x ray spectroscopy to quantify changes in the martensitic microstructure by fast lamp annealing for different types of twinning three <ref:2409.20226#pg1>.

Kai: They are looking at a hierarchy of twinning here. The as deposited state has five levels of twinning, ranging from the nano scale up to the macroscopic level sixteen-eighteen <ref:2409.20226#pg3>. These levels include tetragonal non modulated martensite at level zero, modulated martensites at level one, laminates forming nuclei at level three, and macroscopic twin boundaries at level five sixteen-eighteen <ref:2409.20226#pg3>.

Mira: And they found that fast lamp annealing affects most of these five levels. Specifically, the study observed changes in phase intensity fractions and coherence lengths as a function of energy density three <ref:2409.20226#pg1>.

Lev: They also identified three mechanisms controlling the microstructure formation based on the energy density, which are that martensitic transformation occurs only above a certain threshold energy density, less time is available for microstructure formation with increasing energy density, and an increasing compressive stress occurs in the film with increasing energy density three <ref:2409.20226#pg1>.

Kai: The reduced time available during fast lamp annealing really hinders the ordering of nano twin boundaries at levels one and two, which results in smaller nuclei at level three, and reduces the colony size at level five <ref:2409.20226#pg3>.

Mira: And they also found that thermal stress during fast lamp annealing induces a reorientation from type X to type Y at level five, and it causes wrinkling and cracking when the energy density is high three <ref:2409.20226#pg1>.

Title and authors: Lev: That reorientation from type Y to X with increasing energy density is attributed to mechanism three because the Schmid factor is maximum at a relative orientation of forty five degrees, making it more favorable under stress three <ref:2409.20226#pg1>.

Kai: So what this means for us in terms of what we can predict. The AI system could be improved to predict martensitic microstructure changes based on flash lamp annealing energy density by incorporating those three distinct mechanisms: the transformation threshold, the limited time available, and the increasing compressive stress one <ref:2409.20226#pg1>.

Mira: And it could also improve by quantifying how energy density influences hierarchical twinning by predicting that the reduced time during fast lamp annealing hinders the ordering of nano twin boundaries at levels one and two, which results in smaller nuclei at level three, and reduces colony size at level five two <ref:2409.20226#pg1>.

Lev: Furthermore, the AI system could predict phase fraction changes by modeling the stress effect specifically that type X and Y are expected to respond differently to stress leading to a linear increase of type X with increasing energy density because the type X twin boundary is inclined by forty five degrees making it more favorable under stress three <ref:2409.20226#pg1>.

Kai: Then, for macroscale defects, the AI system can simulate thermal stress effects by observing that wrinkling and cracking at maximum energy density suggest the scenario explained by mechanism three three <ref:2409.20226#pg1>.

Mira: And we should also be able to forecast the effect of cooling rate on microstructure dynamics recognizing that a cooling rate of twenty Kelvin per millisecond is obtained for the highest energy density of eighty three joules per centimeter, which is orders of magnitude faster than what's reachable by any conventional heating and cooling setup three <ref:2409.20226#pg1>.

Lev: That speed difference is significant because it shows that this fast MT can be achieved at a cooling rate of twenty Kelvin per millisecond for ED equal to eighty three joules per centimeter three <ref:2409.20226#pg1>.

Kai: So, to wrap up on the results of the paper "Formation of martensitic microstructure in epitaxial Ni-Mn-Ga films after fast cooling," it gives us a fundamental understanding of the dynamics governing that hierarchically twinned microstructure one <ref:2409.20226#pg1,Formation of martensitic microstructure in epitaxial Ni-Mn-Ga films after fast>.

Mira: The main point is that reduced time during fast lamp annealing hinders ordering, while thermal stress induces reorientation and damage at high energy densities three <ref:2409.20226#pg1>. This fundamental understanding is crucial for future devices that need to be faster and smaller to achieve better performance.

Lev: For real hardware running this, the time-temperature study of the dynamics during formation could provide benchmarks for simulations of martensitic transformation across different time and length scales fifteen <ref:2409.20226#pg3>.

Kai: So, we've seen how fast MT happens in these Ni-Mn-Ga films under extreme conditions. Next up, we're going to look at some other papers on magnetic control of exciton polaritons.

Mira: We’ll be diving into the magnetic control of an exciton-polariton condensate in a van der Waals magnet next.

The paper's summary: Kai: So, to recap, this paper is looking at how rapidly the internal structure of an epitaxial Ni manganese gallium film changes when you heat it up and cool it down really fast instead of slowly sixteen.

Mira: Right. They're focusing on that fast transformation process and what happens to the microstructure—the twinning—when you move away from slow cooling methods three.

Lev: Basically, they show that when you apply a flash lamp pulse, which is this super fast heating method, the time available for the structure to organize is severely limited compared to slow cooling fifteen.

Kai: And because of that limited time, they found that nano-twin boundaries at levels one and two don't have enough time to order properly two.

Mira: Which leads directly to smaller nuclei at level three and a reduction in the overall colony size at level five, which is the macroscopic twin boundary level three.

Lev: That’s a pretty concrete thing. On real hardware, if you need that structure to form fast, those small nuclei won't grow big enough for good performance two.

Kai: And they also found that the thermal stress during this fast process causes a reorientation from type X to type Y at level five three.

Mira: Which they link back to mechanism three, where the compressive stress increases with energy density, and that reorientation is favored because of how the grain boundary is oriented—the Schmid factor is at its maximum when it's forty five degrees three.

Lev: So the stress itself drives a structural change even faster than just time does three.

Kai: And they also saw some damage happening, like wrinkling and cracking, especially when you push the energy density really high three.

Mira: That happens because of that stress pushing things past their limit. The simultaneous occurrence of hillocks and valleys at very high energy density suggests that the substrate is deforming plastically, forcing those valleys to form to compensate for the reduced film thickness three.

Lev: From an error correction standpoint, that plastic deformation on the substrate would introduce a lot of noise and complexity into any attempt to model or build this structure twenty-eight.

Kai: It gives us a clear picture of the trade-off: you can get speed with fast transformation, but you pay for it with less ordered structure and more damage at high energy densities three.

Mira: This fundamental understanding is crucial because it tells us exactly what to expect in devices that need to operate under these rapid thermal cycles fifteen.

Lev: If we are building real hardware, this means we can design the system knowing precisely where the structural breakdown will occur based on the energy density you use three.

Kai: So, next time we look at how this fast transformation works in practice, we’re going to talk about how quickly you can actually cool these films down—the cooling rate itself is a huge variable three.

The paper's improvements: Kai: So, looking at where this research goes next, the paper suggests several ways to make that AI system better for predicting martensitic microstructure changes based on flash lamp annealing energy density three.

Mira: Right. It’s about integrating those three mechanisms we talked about—the transformation threshold, the limited time available, and the increasing compressive stress—into a single predictive model one.

Lev: That would mean the AI could predict how much of that nano-twin boundary ordering you'll get by just looking at the energy density input.

Kai: And it also suggests improving how the AI quantifies hierarchical twinning by predicting that reduced time hinders nano-twin boundaries at levels one and two, which means smaller nuclei at level three and a reduction in colony size at level five two.

Mira: That’s a very specific prediction about the spatial scale changes based on the dynamics of time availability.

Lev: If the AI can predict those spatial effects, that would be huge for error correction because you'd know exactly how much noise or structural uncertainty to budget for in your simulations two.

Kai: Then there’s a point about predicting phase fraction changes by modeling the stress effect specifically that type X and type Y respond differently to stress, leading to a linear increase of type X with increasing energy density because the type X twin boundary is inclined by forty five degrees making it more favorable under stress three.

Mira: So the model would learn that the internal grain orientation shifts based on external stress during those fast cycles three.

Lev: That makes sense for building hardware; if you know that type X will dominate at high energy density, you can design your device to exploit that behavior three.

Kai: And then they suggest a way to predict macroscale defects by simulating thermal stress effects, observing that wrinkling and cracking at maximum energy density suggests the scenario explained by mechanism three three.

Mira: So instead of just seeing a crack in the simulation, you’d be able to see *why* it happened based on the stress mechanism three.

Lev: That moves it from simple pattern recognition to physics-informed prediction, which is where real hardware modeling gets powerful three.

Kai: Finally, they suggest forecasting the effect of cooling rate on microstructure dynamics recognizing that a cooling rate of twenty Kelvin per millisecond is obtained for the highest energy density of eighty three joules per centimeter eight three.

Mira: That speed difference, which is orders of magnitude faster than conventional setups, is important because it shows how much control you have over the kinetics fifteen.

Lev: If you can reliably predict that cooling rate effect, you can set a benchmark for any simulation of martensitic transformation across different time and length scales fifteen.

Conclusion: Kai: So to wrap up, this paper on "Formation of martensitic microstructure in epitaxial Ni-Mn-Ga films after fast cooling" really shows us the limits of speed in these shape memory alloys three.

Mira: The main idea is that when you cool fast, the lack of time forces a less ordered structure, and the thermal stress drives specific types of reorientation at high energy density three.

Lev: From an error correction standpoint, this means we need to account for that structural damage and reorientation when designing any system running on these films eight three.

Kai: Basically, the paper provides a framework for understanding those dynamics—the time limitation and the stress effect—that govern how fast things form in these materials.

Mira: It’s about getting a fundamental grasp of the interplay between kinetics and thermodynamics during rapid transformation processes fifteen.

Lev: If we can use this to benchmark simulations, it’s useful for figuring out how to model the actual physical process when building real hardware eight three.

Kai: We need to keep pushing these limits on speed and structure control in these alloys for applications like energy efficient cooling and harvesting.

Mira: It shows us that even with fast methods, you still have those fundamental constraints imposed by time and stress fifteen.

Lev: The next step is figuring out how this applies to the actual manufacturing process, like how fast we can cool it down twenty Kelvin per millisecond eight three.

Yuru Ge, Fabian Ganss, Klara Lünser, Satyakam Kar, René Hübner, ŧhengqiang Zhou, Lars Rebohle, řebastian Fไhler

Helmholtz-Zentrum Dresden-Rossendorf Institute of Ion Beam Physics and Materials Research · TU Dresden Faculty of Mechanical Science and Engineering · Leibniz IFW Dresden Institute for Metallic Materials

cond-mat.mtrl-sci

Submitted: 2024-09-30

Updated: 2024-09-30

DOI: 10.1016/j.mtadv.2025.100567

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 83/100

The gist: Shape memory alloys can be used in various applications such as high stroke actuation, energy-efficient ferroic cooling…

Key concepts

Hierarchical Martensitic Microstructure
This refers to the complex internal structure of the material, which has five levels of twinning ranging from nano-scale features up to macroscopic twin boundaries. The paper shows how this structure changes during rapid heating and cooling processes.
Flash Lamp Annealing (FLA)
FLA is a fast method used to induce martensitic transformation in the Ni-Mn-Ga film using a millisecond pulse of varying energy density. This rapid process creates unique microstructural features due to the speed of the thermal change.
Stress and Transformation Mechanisms
Three mechanisms control microstructure formation: the transformation itself above a certain energy threshold, limited time for ordering as energy increases, and increasing compressive stress. These factors dictate how twinning occurs and how defects like wrinkles form.
Type-X to Type-Y Reorientation
The paper observed that under high energy density (ED), the martensite reorients from type-Y to type-X. This change is linked to thermal stress, as the favorable orientation for type-X twinning increases when the Schmid factor is maximized at a 45° relative orientation.

Terminology

Summary

Shape memory alloys can be used in various applications such as high stroke actuation, energy-efficient ferroic cooling, and energy harvesting This article uses an epitaxial Ni-Mn-Ga film as a model system to study the formation of the martensitic microstructure after fast heating and cooling Substantial differences compared to slow cooling occur, which we attribute to the limited time available for the microstructure to form and to the thermal stress between film and substrate during rapid temperature changes. p. 0 p. 0

Model System and Methodology

The study employs an epitaxial Ni-Mn-Ga film as a model system because it exhibits a well-ordered hierarchical martensitic microstructure in its as-deposited state The researchers applied a millisecond flash lamp pulse of varying energy density on the Ni-Mn-Ga film and analyzed the hierarchical martensitic microstructure afterwards. They used complementary methods such as reciprocal space mapping (RSM), focused ion beam (FIB) cross-sectioning with scanning electron microscopy (SEM), and scanning transmission electron microscopy ((S)TEM) with spectrum imaging analysis based on energy-dispersive x-ray spectroscopy (EDX) to quantify changes of the martensitic microstructure by FLA for different types of twinning. p. 2

Microstructure Hierarchy and Evolution

The martensitic microstructure in the as-deposited state is described as having five levels of twinning, ranging from the nano- to the macroscopic scale This hierarchy includes tetragonal non-modulated martensite (NM) at level 0, modulated martensites (MM) at level 1, laminates forming nuclei at level 3, and macroscopic twin boundaries (TB) at level 5. FLA affects most of these five microstructure levels. p. 4 Specifically, the study observed changes in phase intensity fractions and coherence lengths as a function of energy density (ED). p. 5

Mechanisms Governing Microstructure Formation

Three mechanisms control the microstructure formation in dependence on the energy density ED:

  1. Martensitic transformation (MT) occurs only above a certain threshold ED. p. 9

  2. With increasing ED, less time is available for microstructure formation. p. 9

  3. With increasing ED, an increasing compressive stress occurs in the film. p. 9

Impact of Energy Density on Twinning

The reduced time available during FLA (mechanism 2) hinders the ordering of nano-twin boundaries (level 1 and 2), which results in smaller nuclei (level 3), and reduces the colony size (level 5). The thermal stress during FLA (mechanism 3) induces a reorientation from type-X to-Y at level 5 and causes wrinkling and cracking at high energy densities. p. 5

Conclusion

The analysis provides an understanding of the dynamics of the different processes governing the formation of the hierarchically twinned microstructure. The reduced time available during FLA hinders ordering, while thermal stress induces reorientation and damage at high energy densities. p. 0 This fundamental understanding is crucial for future devices, which are expected to be faster and smaller to achieve better performance. p. 0

Methods

Ni-Mn-Ga films were grown epitaxially on single-crystalline MgO (001) substrates with a 20-nm thick Cr buffer layer. The fast MT was induced by a 3 ms flash pulse applied to pieces of the film with different ED values ranging from 14 to 83 J/cm2. p. 1 p. 1 Characterization involved RSM, SEM, FIB cross-sectioning, and (S)TEM with EDX analysis. p. 2 The temperature evolution was simulated using finite element calculations of the FLA process. p. 8 p. 8

Results Summary

The study showed that at ED = 55 J/cm2, the surface temperature reaches a maximum of 597 K, which is just below the transformation temperature of around 610 – 615 K, suggesting it is just at the threshold to induce an MT. A cooling rate of 20 K/ms was obtained for ED = 83 J/cm2, which is orders of magnitude faster than conventional setups. p. 8 At level 5, a linear decrease in type-Y to the advantage of type-X is observed with increasing ED, confirming mechanism 3. p. 6

Discussion

The observation that the reorientation from type-Y to type-X with increasing ED is attributed to mechanism 3 because the Schmid factor is maximum at a relative orientation of 45°, making it more favorable under stress. Thermal stress during FLA results in wrinkles and cracking at maximum energy density. p. 0 The simultaneous occurrence of hillocks and valleys at very high ED suggests that plastic deformation of the substrate necessitates the formation of valleys to compensate for reduced film thickness. p. 7 p. 7

Outlook

This work marks a significant step toward disentangling the various processes and their dynamics. This quantification can be expanded to FLA experiments at different pulse durations to conduct a time-temperature study of the dynamics during the formation of a martensitic microstructure. p. 2 Such studies will provide benchmarks for simulations of martensitic transformation across different time and length scales. p. 2

References

[1] R. Kainuma, Y. Imano, W. Ito, Y. Sutou, H. Morito, S. Okamoto, O. Kitakami, K. Oikawa, A. Fujita, T. Kanomata, K. Ishida

[2] J.-L., T.-G., K.-P., J.-D., O.-G., Giant magnetocaloric effect driven by structural transitions

[3] M. Gueltig, F. Wendler, H. Ossmer, M. Ohtsuka, H. Miki, T. Takagi, M. Kohl

[4] A Dana, S Vollach, D Shilo

[5] E Faran, D Shilo

[6] A Dana, E Bronstein

[7] R Ash, Z Abhari

[8] S O Mariager, A Caviezel P Beaud C Quitmann G Ingold

[9] S O Mariager, C Dornes J A Johnson A Ferrer S Grübel T Huber

[10] S Vollach, H Shlagman D Shilo Kinetics of the reverse martensitic transformation in shape memory alloys under an abrupt heating pulse

[11] A Dana, H Sekiguchi K Aoyama E Faran K D Liss The evolution of the martensitic transformation at the high-driving-force regime: A microsecondscale time-resolved X-ray diffraction study

[12] P Gaal D Schmidt M Khosla C Richter P Boesecke D Novikov M Schmidbauer J Schwarzkopf Self-stabilization of the equilibrium state in ferroelectric thin films

[13] S Schwabe B Schleicher R Niemann R Hühne P Walter K Nielsch A Waske S Fähler Probing the martensitic microstructure of magnetocaloric Heusler films by synchrotron diffraction

[14] S Schwabe K Lünser D Schmidt K Nielsch P Gaal S Fähler What is the speed limit of martensitic transformations? Sci. Technol. Adv. Mater. 23(1) (2022) 633-641

[15] L Rebohle S Prucnal D Reichel Flash lamp annealing Springer Cham, 2019

[16] S Schwabe R Niemann A Backen D Wolf C Damm T Walter H Seiner O Heczko K Nielsch S Fähler Building hierarchical martensite Adv Funct Mater. 31(7) (2021) 2005715

[17] R Niemann A Backen S Kauffmann-Weiss C Behler U K Rössler H Seiner O Heczko K Nielsch L Schultz S Fähler Nucleation and growth of hierarchical martensite in epitaxial shape memory films Acta Mater. 132 (2017) 327-334

[18] M E Gruner R Niemann P Entel R Pentcheva U K Rößler K Nielsch S Fähler Modulations in martensitic Heusler alloys originate from nanotwin ordering Sci. Rep. 8(1) (2018) 8489

[19] A G Khachaturyan S M Shapiro S Semenovskaya Adaptive phase formation in martensitic transformation Phys. Rev. B: Condens. Matter, 43(13) (1991) 10832-10843

[20] S Kaufmann U K Rößler O Heczko M Wuttig J Buschbeck L Schultz S Fähler Adaptive modulations of martensites Phys. Rev. Lett. 104(14) (2010) 145702

[21] S Kaufmann R Niemann T Thersleff U K Rößler O Heczko J Buschbeck B Holzapfel L Schultz S Fähler Modulated martensite: why it forms and why it deforms easily New J. Phys. 13(5) (2011) 053029

[22] M Takhsha Ghahfarokhi J A Arregi F Casoli M Horký R Cabassi V Uhlíř F Albertini Microfabricated ferromagnetic-shape-memory Heuslers The geometry and size effects Applied Materials Today 23 (2021) 101058

[23] P Ranzieri M Campanini S Fabbrici L Nasi F Casoli R Cabassi E Buffagni V Grillo C Magen F Celegato G Barrera P Tiberto F Albertini Achieving giant magnetically induced reorientation of martensitic variants in magnetic shape-memory Ni-Mn-Ga Films by microstructure engineering Adv. Mater. 27(32) (2015) 4760-6

[24] B Yang ZB Li YD Zhang G W Qin C Esling O Perroud X Zhao L Zuo Microstructural features and orientation correlations of non-modulated martensite in Ni-Mn-Ga epitaxial thin films Acta Mater. 61(18) (2013) 6809-6820

[25] A Diestel V Neu A Backen L Schultz S Fähler Magnetic domain pattern in hierarchically twinned epitaxial Ni-Mn-Ga films J. Condens. Matter Phys. 25(26) (2013) 266002

[26] F Casoli G Varvaro M T Ghahfarokhi S Fabbrici F Albertini Insight into the magnetisation process of martensitic Ni-Mn-Ga films a micromagnetic and vector magnetometry study J Phys-Mater 3(4) (2020) 045003

[27] T Grabec Z Soudná K Repček K Lünser S Stoklasová P Sedlák H Seiner Guided acoustic waves in thin epitaxial films Experiment and inverse problem solution for NiTi Ultrasonics 138 (2024) 107211

[28] M Thomas O Heczko J Buschbeck L Schultz S Fähler Stress induced martensite in epitaxial Ni-Mn-Ga films deposited on MgO(001) Appl. Phys. Lett. 92(19) (2008) 92

[29] A Diestel P Chekhonin R Niemann W Skrotzki K Nielsch S Fähler Reducing thermal hysteresis in epitaxial Ni-Mn-Ga-Co films by transformation cycling Phys Status Solidi B 255(2) (2018) 1700330

[30] S Prucnal Y Berencén M Wang L Rebohle R Kudrawiec M Polak V Zviagin R Schmidt-Grund M Grundmann J Grenzer M Turek A Drozdziel K Pyszniak J Zuk M Helm W Skorupa S Zhou Band gap renormalization in n-type GeSn alloys made by ion implantation and flash lamp annealing J Appl. Phys. 125(20) (2019) 125]

[31] A Dejneka V Zablotskii M Tyunina L Jastrabik J I Pérez-Landazábal V Recarte V Sánchez-Alarcos V A Chernenko Ellipsometry applied to phase transitions and relaxation phenomena in NiMnGa ferromagnetic shape memory alloy Appl. Phys. Lett. 101(14) (2012) 101]

[32] M F Al-Kuhaili Chemical and optical properties of thermally evaporated manganese oxide thin films J Vac Sci Tech. 24(5) (2006) 1746-1750

[33] YV Kudryavtsev YP Lee J Y Rhee Structural and temperature dependence of the optical and magneto-optical properties of the Heusler Ni2MnGa alloy Phys. Rev. B 66(11) (2002) 115114

[34] A M Hofmeister Thermal diffusivity and thermal conductivity of single-crystal MgO and Al2O3 and related compounds as a function of temperature Phys Chem Miner. 41(5) (2014) 361-371

--- Page 1 ---

Shape memory alloys can be used in various applications such as high stroke actuation, energy-efficient ferroic cooling, and energy harvesting This article uses an epitaxial Ni-Mn-Ga film as a model system to study the formation of the martensitic microstructure after fast heating and cooling. Substantial differences compared to slow cooling occur, which we attribute to the limited time available for the microstructure to form and to the thermal stress between film and substrate during rapid temperature changes.

Ni-Mn-Ga films were grown epitaxially on single-crystalline MgO (001) substrates with a 20-nm thick Cr buffer layer. The fast MT was induced by a 3 ms flash pulse applied to pieces of the film with different ED values ranging from 14 to 83 J/cm2. Characterization involved RSM, SEM, FIB cross-sectioning with scanning electron microscopy (SEM), and scanning transmission electron microscopy ((S)TEM) with spectrum imaging analysis based on energy-dispersive x-ray spectroscopy (EDX). p. 2 The temperature evolution was simulated using finite element calculations of the FLA process.

The observation that the reorientation from type-Y to type-X with increasing ED is attributed to mechanism 3 because the Schmid factor is maximum at a relative orientation of 45°, making it more favorable under stress. Thermal stress during FLA results in wrinkles and cracking at high energy densities. p. 7 The simultaneous occurrence of hillocks and valleys at very high ED suggests that plastic deformation of the substrate necessitates the formation of valleys to compensate for reduced film thickness.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI system can predict martensitic microstructure changes based on flash lamp annealing energy density by incorporating three distinct mechanisms: MT occurs only above a certain threshold ED, With increasing ED, less time is available for microstructure formation, and With increasing ED, an increasing compressive stress occurs in the film.

  2. Improved AI system can quantify the influence of energy density on hierarchical twinning by predicting that the reduced time available during FLA hinders the ordering of nano-twin boundaries (level 1 and 2), which results in smaller nuclei (level 3), and reduces the colony size (level 5).

  3. Improved AI system can predict phase fraction changes by modeling the stress effect, specifically that type-X and-Y are expected to respond differently to stress, leading to a linear increase of type-X with increasing ED because the type-X TB is inclined by 45°, making it more favourable under stress.

  4. Improved AI system can predict macroscale defects by simulating thermal stress effects, such as observing that wrinkling and cracking at maximum energy density suggest the following scenario, which is explained by mechanism 3.

  5. Improved AI system can forecast the effect of cooling rate on microstructure dynamics, recognizing that a cooling rate of 20 K/ms is obtained for the highest energy density of ED = 83 J/cm2, which is orders of magnitude faster than that reachable by any conventional heating and cooling setup.

Related papers