Selective switch for band-edge alignments in pentagonal CdSeTe monolayer: Atom-valley locking

arXiv:2409.09625 · cond-mat.mtrl-sci, cond-mat.mes-hall · Submitted 2024-09-15 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: We're looking at the paper: "Selective switch for band-edge alignments in pentagonal CdSeTe monolayer".

Paper summary: Kai: So we’re looking at this paper called "Selective switch for band-edge alignments in pentagonal CdSeTe monolayer: Atom-valley locking." The main idea here is that they designed a specific three-atom layer of Cadmium Selenide Telluride, or CdSeTe. They claim that by doing this, they can create a situation where you get multiple band-edge positions instead of just one.

Mira: That sounds like it could be really useful for things like water splitting because the abstract mentions photocatalytic water splitting one <ref:2409.09625#pg1>. What's the core mechanism they propose for this, Kai?

Kai: Well, they call it atom-valley locking. They found that because of how the atoms are arranged in this pentagonal shape, the valleys—which are these intrinsic degrees of freedom for electrons—get locked onto specific sites on the material. This localization leads to two different band-edge alignments.

Lev: So you're saying the valley distribution isn't random across the material, it’s tied to which atom is where? That sounds like a structural constraint that’s really important for any real device.

Mira: Exactly. And they found that this locking causes a spontaneous polarization of one hundred eighty-seven meV between these two valleys, and they say this happens without needing to break the time-reversal symmetry, which is usually something you have to do externally one <ref:2409.09625#pg1,a spontaneous polarization of 187 meV between>.

Kai: That’s the part that really caught my attention. It suggests that just by having the right atomic structure, you can get a built-in electric field effect without putting in extra energy or using an external field.

Lev: From an engineering side, that's huge because it means we don't need bulky external electric fields to control things like hydrogen evolution reactions. It shifts the control mechanism from applying power to engineering the material itself.

Mira: And they connect this directly to their application, saying that they can use strain engineering to selectively switch between these two alignments two <ref:2409.09625#pg1>. This switching capability is what allows for precise control over where the hydrogen evolution reaction happens on the surface.

Kai: So, if you apply a certain amount of tension or compression—strain—you can switch which band-edge alignment dominates, and that directly controls where your water splitting process occurs. That's a lot of control in one material.

Lev: It makes sense from an error correction standpoint because controlling the operational site is much more efficient than trying to manage complex charge distributions across a whole surface. What kind of strain are they talking about?

Mira: They tested tensile strain ranging from minus two percent to eight percent along the one-one-zero direction, and compressive strain between zero and eight percent along the one-bar-one-zero direction four. This range of applied force is what allows them to toggle between the two alignments.

Kai: It seems they’ve mapped out a specific region in strain space where you have this selective switching happening. That gives us a concrete target for synthesis and testing on our experimental platforms.

Paper summary: Lev: If we were to try to build this, we’d need materials that are structurally stable under those strain conditions, which the paper mentions they checked using elastic constants five <ref:2409.09625#pg2>. The fact that they found no imaginary frequencies in the phonon dispersion curve means it’s dynamically stable.

Mira: Right. And looking at their electronic structure analysis at the HSE zero six level six, they show two valleys in both of these monolayers, but one is Se-driven and the other is Te-driven, with that one hundred eighty-seven meV polarization between them four. That’s a really clean separation.

Kai: It’s interesting because in the CdSe two-layer material, both valleys are contributed only by Selenium atoms and they are energetically degenerate, meaning they have the same energy. But in the CdSeTe layer, that degeneracy is broken by that one hundred eighty-seven meV polarization <ref:2409.09625#pg1>.

Lev: So when you move to real hardware, if we were trying to measure this valley polarization with superconducting qubits or whatever we use for calibration, this difference of one hundred eighty-seven meV needs to be significantly larger than our thermal noise floor for it to be practically observable <ref:2409.09625#pg1>.

Mira: That’s a fair point about the experimental feasibility. The paper’s main contribution is showing that this spontaneous polarization doesn't require breaking time-reversal symmetry, which simplifies the theoretical framework we have for these materials four.

Kai: So, it opens up a whole new avenue for exploring valley polarization in 2D materials without having to rely on external electric fields to induce them <ref:2409.09625#pg1>. That’s a big deal for understanding intrinsic material properties.

Lev: For actual device fabrication, the challenge remains translating that strain-dependent switching into something robust that can handle real operating conditions without degrading the valley locking mechanism itself.

Mira: And their conclusion points toward finding those critical points where the energy difference between alignments becomes zero, specifically at eight percent tensile strain along the one-one-zero direction or minus six percent compressive strain along the one-bar-one-zero direction five <ref:2409.09625#pg2>. That gives us a precise point to aim for in tuning our system.

Kai: So, to wrap up this paper on "Selective switch for band-edge alignments in pentagonal CdSeTe monolayer: Atom-valley locking," they show that by designing the atomic structure, you lock valleys into place, creating two distinct energy levels separated by one hundred eighty-seven meV <ref:2409.09625#pg1,pentagonal CdSeTe monolayer: Atom-valley locking>. You can then use strain to switch between these two energy levels to control a reaction site.

Lev: It suggests a path toward self-controlled photocatalytic water splitting where the efficiency is tuned by mechanical stress applied to the layer, which is much more integrated than external electrical tuning.

Mira: And it gives us concrete strain ranges and polarization values to work with, which helps guide future material design efforts in this area.

Kai: This paper really expands our understanding of how intrinsic electric fields emerge in these 2D materials and how we can manipulate them using simple mechanical means <ref:2409.09625#pg1>.

Conclusion: Kai: So we're looking at the final bits of this paper, "Selective switch for band-edge alignments in pentagonal CdSeTe monolayer: Atom-valley locking," and what it means for us.

Mira: Basically, they showed how designing a specific shape of three atoms in a layer of Cadmium Selenide Telluride can lock the electron valleys into place.

Lev: And that locking creates two different energy levels separated by one hundred eighty seven milli-electron volts between them.

Kai: So the whole point is you can use strain to switch which alignment you have active, meaning you control where a reaction happens on the surface.

Mira: That means for water splitting, for instance, if you apply this specific strain along certain directions, you can choose whether the hydrogen evolution reaction occurs on the top or bottom of the material.

Lev: And they found that by changing that mechanical stress—the strain—you can find exact points where those two energy levels are actually equal out.

Kai: That’s interesting because it means we have a way to tune this process using just physical force, not necessarily an external electric field, which is a huge advantage for device integration.

Mira: It really expands what we thought was possible with valley polarization in two dimensional materials by showing how you can get that intrinsic effect without needing to break time-reversal symmetry.

Lev: But the caveat here is that we need to figure out how robust this strain-induced switching mechanism is when you try to run it on real hardware, because that’s where the complexity really hits.

Kai: Exactly, so if we're building something, our next question is how much mechanical stress can the material handle before it messes up the locking mechanism itself.

Zhi-Qiang Wen, Qiu Yang, Shu-Hao Cao, Zhao-Yi Zeng, *Hua-Yun Geng, Xiang-Rong Chen

College of Physics, Institute of Atomic and Molecular Physics, Sichuan University · College of Physics and Electronic Engineering, Chongqing Normal University · National Key Laboratory for Shock Wave and Detonation Physics Research, Institute of Fluid Physics, CAEP

cond-mat.mtrl-sci, cond-mat.mes-hall

Submitted: 2024-09-15

Updated: 2026-11-18

Comments: 9 pages, 5 figures

Journal ref: Phys. Rev. B 114, L291108(2026)

DOI: 10.1103/qhjb-m4z9

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

The gist: In this Letter, we designed the ternary pentagonal CdSeTe monolayer, and proposed a novel concept called atom-valley locking…

Key concepts

Atom-Valley Locking
This novel concept describes how valleys in the CdSeTe monolayer are confined within sublayers made of a single atom type. This makes the valley distribution dependent on which specific atom is at that location, unlike other layer-valley coupling where valleys are distributed more broadly across layers.
Spontaneous Valley Polarization
The material naturally develops a valley polarization of 187 meV without needing to break time-reversal symmetry externally. This intrinsic effect is caused by the localization of valley electrons and the breaking of four-fold rotational reflection symmetry within the structure.
Strain Engineering
Applying mechanical strain to the material allows for selective switching between different band-edge alignments. By applying specific tensile or compressive strains along certain directions, researchers can precisely control which alignment dominates, enabling control over chemical reactions like the hydrogen evolution reaction.

Terminology

Summary

In this Letter, we designed the ternary pentagonal CdSeTe monolayer, and proposed a novel concept called atom-valley locking, which could provide multiple band-edge positions<ref:2409. p. 009625#pg2> This phenomenon can be attributed to the localization of valley electrons and the breaking of four-fold rotational reflection symmetry<ref:2409. p. 009625#pg4> Due to the atom-dependent valley distribution, two types of band-edge alignments can be identified<ref:2409. p. 009625#pg4> Moreover, selective switching between them can be achieved by strain engineering, thereby enabling precise control over the site of the hydrogen evolution reaction<ref:2409. p. 109625#pg5> Our findings open up new opportunities for exploring valley polarization and provide unique insights into the photocatalytic applications of 2D materials with intrinsic electric fields<ref:2409. p. 109625#pg2>.

Introduction to Valley Physics

Valley, as an intrinsic degree of freedom for electrons, have become a hot topic in condensed matter physics in recent years [1-5]<ref:2409.09625#pg3> It has been proven that the valley degree of freedom can couple with other electronic degrees of freedom, leading to various physical phenomena such as spin-valley coupling [5-12], valley-layer coupling [9,13-16], and valley-orbit coupling [17-19]<ref:2409. p. 109625#pg3>. These studies indicate that manipulating valleys through external means enables more efficient control of spin, offering extensive possibilities for the design of nextgeneration spintronic devices [32-41]<ref:2409. p. 109625#pg4>. Could the manipulation of valleys enable the applications in other fields, such as the solar-driven hydrogen production from water splitting [42]? p. 1 The answer is affirmative<ref:2409. p. 209625#pg4>.

Material Design and Structural Stability

We design a ternary pentagonal CdSeTe monolayer and propose a novel concept called atom-valley locking, which has two outstanding features: 1) unlike the layer-valley coupling [9,13-16,55,56], the valleys in the CdSeTe monolayer are confined within sublayers composed of only a single type of atom, making the valley distribution atom-dependent<ref:2409.09625#pg4> 2) a spontaneous valley polarization of 187 meV is achieved without the typical requirement of breaking time-reversal symmetry [14], which is attributed to the localization of valley electrons and the breaking of four-fold rotational reflection symmetry<ref:2409. p. 209625#pg4>. The optimized crystal structures of (a) CdSeTe and (b) CdSe2 monolayers are illustrated in Fig. p. 4 1(a) and 1(b)<ref:2409.09625#pg5> The absence of imaginary frequencies in the phonon dispersion curve indicates its dynamic stability<ref:2409. p. 309625#pg5> The independent elastic constants meet the Born criteria (C11 > 0, C66 > 0, and C11 > C12) [61], suggesting its mechanically stability<ref:2409. p. 409625#pg5>.

Electronic Structure Analysis

The projected band structures of both monolayers at the HSE06 level are shown in Figs. 2(a) and 2(b)<ref:2409.09625#pg6> We find that each monolayer exhibits two valleys in the conduction band, located along the high symmetry paths Γ–M and Γ–Μ', respectively<ref:2409.09625#pg6>. In the CdSe2 monolayer, the two valleys are solely contributed by Se atoms and exhibit energetic degeneracy<ref:2409. p. 609625#pg6> In contrast, the two valleys in the CdSeTe monolayer are contributed by Se and Te atoms, respectively, with a polarization of 187 meV between them<ref:2409. p. 609625#pg4>. Both the valley and layer polarization arise spontaneously within the material, with no need for external assistance<ref:2409. p. 609625#pg4>.

Selective Switching Mechanism

The absolute band-edge positions of each valley can be obtained from [49,67]: EVB abs = EVB DFT − VVAC, ECB abs = ECB DFT − VVAC<ref:2409.09625#pg2> The bandedge alignment can be categorized into four types based on the spatial distribution of valley carriers<ref:2409. p. 909625#pg4>. When Alignment 1 is active, the HER occurs on the lower surface; when Alignment 2 is active, the HER occurs on the upper surface<ref:2409. p. 209625#pg2>. Strain alters the polarization between conduction-band valleys in the CdSeTe monolayer, which in turn affects the dominance relationship between its band-edge alignments<ref:2409. p. 309625#pg4>. When tensile strain ranging from-2% to 8% along the [110] direction is applied, or compressive strain ranging from 0% to 8% along the [1̅10] direction is applied, both alignments are active<ref:2409. p. 309625#pg4>.

Conclusion and Outlook

Strain alters the polarization between conduction-band valleys in the CdSeTe monolayer, which in turn affects the dominance relationship between its band-edge alignments<ref:2409.09625#pg4>. When the absolute value of ΔEc is large, it can be approximated that only one type of alignment is active, similar to the behavior observed in many 2D materials with intrinsic electric fields [45-48,68]<ref:2409. p. 209625#pg4>. Conversely, when the absolute value of ΔEc is small, both alignments are active, but they exhibit different levels of dominance<ref:2409. p. 909625#pg4>. By varying the applied strains, we identified two critical conditions where ΔEc becomes zero, namely 8% tensile strain along the [110] direction and-6% compressive strain along the [1̅10] direction<ref:2409. p. 309625#pg5>. This capability provides a method to control whether the products are mixed or separated, holding potential for future applications<ref:2409.09625#pg4>. The possibilities for achieving valley polarization are significantly expanded by eliminating the requirement to break the time-reversal symmetry<ref:2409. p. 209625#pg4>.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI system can perform precise control over hydrogen evolution reaction location by modulating valley polarization through strain engineering, as described by selective switching between them can be achieved by strain engineering, thereby enabling precise control over the site of the hydrogen evolution reaction.

  2. Improved AI system can predict which surface of a ternary pentagonal CdSeTe monolayer supports the HER based on applied in-plane strains, specifically determining that When a-2% compressive strain along the [1̅10] direction is applied, only Alignment 1 is active, and the HER can occur solely on the lower surface of the CdSeTe monolayer.

  3. Improved AI system can differentiate between two types of band-edge alignments in a material with intrinsic electric fields by analyzing strain effects on valley polarization, as indicated by when the value of Delta Ec is positive, Alignment 1 is dominant; when the value of Delta Ec is zero, both alignments are equally significant; and when the value of Delta Ec is negative, Alignment 2 becomes dominant.

  4. Improved AI system can model and predict the resulting bandgap values and polarization differences between conduction-band valleys under various strain conditions using Delta Ec = ECB(Se) DFT - ECB(Te) DFT, allowing for accurate assessment of alignment dominance.

Related papers