Higgs Physics at a sqrt s =3 TeV Muon Collider with detailed detector simulation

arXiv:2405.19314 · hep-ex · Submitted 2024-05-29 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Experiment. The day in high-energy experiment: detectors, searches and limits.

Kai: We're looking at the paper: "Higgs Physics at a sqrt s =3 TeV Muon Collider with detailed detector simulation".

Mira: Here's the gist of the paper. The Muon Collider is one of the most promising future collider facilities with the potential to reach multi-TeV center-of-mass energy and high luminosity, holding the capability to significantly advance our understanding of the Higgs sector to an unprecedented level of precision The study presents the prospects for various measurements of Higgs boson production cross sections at a √s = 3 TeV collider using a detailed detector simulation in a realistic environment Experimental Environment A MuC facility consists of several sub-systems, which are described in detail in Refs.

10: and

14: Here, the main components of a √s = 3 TeV MuC complex, relevant for evaluating the background effects on the detector, are briefly outlined The structure includes the elements discussed in Ref.

10: in the exact same sequence: a muon injector, an acceleration ring, and a collision ring Muons are produced in the decay of pions generated by a high-intensity proton beam impinging on a target with high power (in the order of megawatts) The original muon beam, which has large longitudinal and transverse emittances, is organized in bunches and is directed into a cooling channel The choice of the technique for cooling the muon beams is dictated by the short lifetime of the muon The proposed technique is the ionization cooling, currently under investigation Simulation and Reconstruction for Signal and Background Samples The analysis strategy for measuring the single and double Higgs boson production cross sections is driven by their respective production mechanisms, which determine the kinematic properties of the events as well as the contributing physics background processes In Sec.

Kai: 3.1, the generation of physics signal and background processes is described The detector used in the detailed simulation is presented in Sec.

Paper summary: Kai: So to summarize this paper, "Higgs Physics at a sqrt s =three TeV Muon Collider with detailed detector simulation" presents the prospects for measuring various Higgs boson production cross sections at a three teraelectronvolt collider <ref:2405.19314#pg1,s =3 TeV Muon Collider with detailed detector simulation>.

Mira: The core claim is that using a detailed detector simulation in a realistic environment allows them to show the feasibility of achieving high precision measurements of these cross sections, even when there's beam-induced background noise from the muon beams.

Lev: They specifically detail how they generate both the physics signal and the background processes, which helps you understand exactly what challenges you're facing in event reconstruction for this machine.

Kai: They then go into a lot of detail on the detector setup, explaining how they digitize events at every sensor simultaneously to handle both contributions properly.

Mira: The study demonstrates that these measurements are possible with the current state-of-the-art detector design, and it also discusses the necessary detector requirements for getting those high resolutions and for measuring that trilinear self-coupling.

Lev: In essence, they are showing a path forward by proving that you can actually measure things with enough precision at this energy scale using what we have in terms of detector technology.

Kai: So, it’s not just theoretical possibility; it’s a demonstration of what high precision measurement looks like when you factor in the real physics environment of a muon collider.

Mira: And they highlight that the presence of beam-induced background from decaying muons poses unique challenges for both detector development and event reconstruction in this kind of experiment.

Lev: The paper lays out the specific challenges related to that background, which is important because it shows where the real hurdles are before you try to build a real machine.

Conclusion: Kai: Looking at the title "Higgs Physics at a sqrt s =three TeV Muon Collider with detailed detector simulation," it really captures the essence of what this work is about <ref:2405.19314#pg1,s =3 TeV Muon Collider with detailed detector simulation>.

Mira: It's not just about saying we can measure Higgs production; it’s about showing *how* you do it, by including that detailed detector simulation and those real environment challenges.

Lev: The implications are that they give us a roadmap for designing future detectors, because the requirements they determined for this three teraelectronvolt case directly inform the design of a ten teraelectronvolt detector.

Kai: So what's the simple picture here? They're using this detailed study to show that you can achieve high precision on Higgs couplings at three teraelectronvolt energy, and those findings are foundational for designing the next generation of colliders.

Mira: It boils down to proving that with a realistic simulation, we can tackle complex backgrounds and get the necessary resolution for fundamental tests of the Higgs sector.

INFN Sezione di Padova University of Padua Institute European Organization for Nuclear Research INFN Sezione di Torino University of Turin University of Padova INFN Sezione di Trieste University of Trieste INFN Sezione di Roma Universita La Sapienza Laboratório de Instrumentação e Física Experimental de Partículas Stony Brook University United States University of Birmingham United Kingdom Fermi National Accelerator Laboratory Université Catholique de Louvain Stockholm Universitet Lawrence Berkeley National Laboratory

hep-ex

Submitted: 2024-05-29

Updated: 2026-11-12

Journal ref: Eur. Phys. J. C 85, 221 (2025)

DOI: 10.1140/epjc/s10052-025-13923-6

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 84/100

The gist: The Muon Collider is one of the most promising future collider facilities with the potential to reach multi-TeV center-of-mass energy and high luminosity…

Key concepts

Muon Collider
A future particle accelerator designed to collide muons at very high energies (like 3 TeV). It is a promising facility intended to precisely study the Higgs sector, offering higher energy and luminosity than current colliders.
Trilinear Coupling ($\kappa_{\lambda 3}$)
This parameter describes the strength of the interaction between three Higgs bosons. Measuring its value is crucial for understanding how the Higgs boson interacts with itself, which helps test theories beyond the Standard Model.
Event Merging
The process where signal events (Higgs production) and physics background processes are combined at the level of detector hits. This ensures that both contributions are digitized simultaneously across all sensors for accurate analysis.

Terminology

Summary

The Muon Collider is one of the most promising future collider facilities with the potential to reach multi-TeV center-of-mass energy and high luminosity, holding the capability to significantly advance our understanding of the Higgs sector to an unprecedented level of precision The study presents the prospects for various measurements of Higgs boson production cross sections at a √s = 3 TeV collider using a detailed detector simulation in a realistic environment

Experimental Environment

A MuC facility consists of several sub-systems, which are described in detail in Refs. [10] and [14] Here, the main components of a √s = 3 TeV MuC complex, relevant for evaluating the background effects on the detector, are briefly outlined The structure includes the elements discussed in Ref. p. 2

Where the paper says it

Here, the main components of a √ s = 3 TeV MuC complex, relevant for evaluating the background effects on the detector, are briefly outlined. The structure includes the elements discussed in Ref.

[10] in the exact same sequence: a muon injector, an acceleration ring, and a collision ring Muons are produced in the decay of pions generated by a high-intensity proton beam impinging on a target with high power (in the order of megawatts) The original muon beam, which has large longitudinal and transverse emittances, is organized in bunches and is directed into a cooling channel The choice of the technique for cooling the muon beams is dictated by the short lifetime of the muon The proposed technique is the ionization cooling, currently under investigation

Simulation and Reconstruction for Signal and Background Samples

The analysis strategy for measuring the single and double Higgs boson production cross sections is driven by their respective production mechanisms, which determine the kinematic properties of the events as well as the contributing physics background processes In Sec. 3.1, the generation of physics signal and background processes is described The detector used in the detailed simulation is presented in Sec. p. 4

Where the paper says it

1, the generation of physics signal and background processes is described. The detector used in the detailed simulation is presented in Sec.

3.2, along with the simulation framework In Sec. p. 4
Where the paper says it

The detector used in the detailed simulation is presented in Sec. 2, along with the simulation framework.

3.3 explains the digitisation procedure, while Sec. p. 4
Where the paper says it

2, along with the simulation framework. 3 explains the digitisation procedure, while Sec.

3.4 discusses the reconstruction algorithms employed A MuC event is defined as a generated signal or physics background process with the BIB particles produced in a bunch crossing overlaid The merging is performed at the level of detector hits, ensuring that both contributions, the signal or the physics background and the BIB, undergo hit digitization in each sensor of the sub-detectors simultaneously

Determination of Higgs Boson Cross Sections times Branching Ratios

The cross section is estimated as follows: σ(H → b¯b) = NS/ϵ · L The statistical uncertainty on the cross section is dominated by the uncertainty on the signal yield For example, the estimated uncertainty on the production cross section is: ∆σ(H → b¯b) / σ(H → b¯b) = 0.75%

Trilinear Coupling Precision Determination

The evaluation of the uncertainty on the trilinear Higgs boson self-coupling has been conducted using the simulated sample µ+µ− → HHX → b¯bb¯bX, described in Sec. 6.1 The total double-Higgs production cross section is sensitive to the value of the trilinear self-coupling The uncertainty on the trilinear Higgs self-coupling is found to be 0. p. 1

Where the paper says it

The study demonstrates the feasibility of achieving high precision measurements of the Higgs boson production cross sections with the current state-of-the-art detector design. In addition, the paper discusses the detector requirements necessary for obtaining such resolutions and for measuring the Higgs trilinear self-coupling.

81 < κλ3 < 1. p. 1
Where the paper says it

In the case of the Higgs self-interaction, the 95% C. limits on the coupling modifier κλ3 = λ3 λ SM 3 (with λ SM 3 being the expected SM value) are 1 In this paper natural units where ℏ = c = 1 are used.

p. 1
Where the paper says it

In the case of the Higgs self-interaction, the 95% C. limits on the coupling modifier κλ3 = λ3 λ SM 3 (with λ SM 3 being the expected SM value) are 1 In this paper natural units where ℏ = c = 1 are used.

44 at 68 % confidence level

Lesson Learned: Requirements for Higgs Measurements

The detector requirements determined for a √s = 3 TeV MuC case are also fundamental for designing the √s = 10 TeV detector In Tab, 10, the performance requirements are summarized The average transverse momentum of particles from Higgs decays is of the same order (∼100 GeV) at both √s = 3 TeV and √s = 10 TeV

Outlook

The estimated precision on the Higgs trilinear self-coupling (discussed in Sec. 6) is currently affected by the performance of the simplified algorithms employed in event reconstruction The uncertainty on the trilinear Higgs self-coupling is found to be 0. p. 1

Where the paper says it

The study demonstrates the feasibility of achieving high precision measurements of the Higgs boson production cross sections with the current state-of-the-art detector design. In addition, the paper discusses the detector requirements necessary for obtaining such resolutions and for measuring the Higgs trilinear self-coupling.

81 < κλ3 < 1.44 at 68 % confidence level Running a MuC at √s = 10 TeV for 5 years is expected to achieve an uncertainty of approximately 4% with 10 ab−1, which represents the best precision attainable by any future collider

Object Requirements

The detector requirements determined for a √s = 3 TeV MuC case are also fundamental for designing the √s = 10 TeV detector For muons, photons, jets, and b-jets the resolution requirements are taken from the performance of the reconstruction described in Sec. 3, and evaluated for objects with pT = 100 GeV The value of pT = 100 GeV is chosen because it is the peak of Higgs daughters pT distribution in 2-body Higgs decays (Fig. 16) For b-jets the identification efficiencies and the c-mistag rate are also quoted

Acknowledgments

We are grateful to the International Muon Collider Collaboration and the US Muon Accelerator Program for their support In particular, we thank Anthony Badea, Tova Holmes, Federico Meloni, and Andrea Wulzer for their valuable comments that helped improve the paper We acknowledge the financial support of the Italian National Institute for Nuclear Physics (INFN), the University of Padua, and the European Organization for Nuclear Research (CERN) This work was supported by the European Union’s Horizon 2020 and Horizon Europe Research and Innovation programs through the Marie Skłodowska-Curie RISE Grant Agreement No. 101006726, the Research Infrastructures INFRADEV Grant Agreement No. p. 0

Where the paper says it

cUniversità di Padova, Padova, Italy. dEuropean Organization for Nuclear Research, Geneva, Switzerland.

101094300, and the EXCELLENT SCIENCE - Research Infrastructures Research Innovation Grant Agreement No. p. 0
Where the paper says it

cUniversità di Padova, Padova, Italy. dEuropean Organization for Nuclear Research, Geneva, Switzerland.

101004761 The references are listed at the end of the paper

References

[1] Dawson, S., et al.: Report of the Topical Group on Higgs Physics for Snowmass 2021: The Case for Precision Higgs Physics (2022) arXiv:arXiv:2209. p. 1

Where the paper says it

The couplings of the Higgs boson to the elementary fermions and bosons generate the particle masses. The most recent review of the expected experimental precision on such couplings, including projections for the High-Luminosity LHC (HL-LHC), is presented in the Snowmass Energy Frontier report [6].

07510 [hep-ph]

[3] Higgs, P.W.: Spontaneous Symmetry Breakdown without Massless Bosons. p. 1

Where the paper says it

In addition, the paper discusses the detector requirements necessary for obtaining such resolutions and for measuring the Higgs trilinear self-coupling. 1 Introduction The Higgs boson (H) is considered a portal to new physics, because it is connected to some of the fundamental questions about the Universe [1], including the mechanism of Electroweak Symmetry Breaking (EWSB), the origin of the masses, the matter-antimatter asymmetry, and the nature of dark matter.

Phys. Rev. 145, 1156–1163 (1966) https://doi.org/10.1038/PhysRevLett. 2405.19314

[8] Aad, G., et al.: Constraints on the Higgs boson self-coupling from single- and double-Higgs production with the ATLAS detector using pp collisions at √s = 13 TeV. p. 2

Where the paper says it

3 Tot Stat Exp Th Uncertainty [%] ATLAS and CMS HL-LHC Projection per experiment -1 s = 14 TeV, 3000 fb Total Statistical Experimental Theory 2% 4% Figure 1 Projections of the expected precision of the ATLAS and CMS combination on the Higgs production cross sections (left) and κi coupling modifiers (right) including HL-LHC [1] data. This paper presents the results on the Higgs boson studies obtained at a √ s = 3 TeV MuC with a detailed detector simulation and including the beam-induced background (BIB).

Phys. Lett. B 843, 137745 (2023) https://doi.org/10.1016/j.physletb.2023.137745 arXiv:arXiv:2211. p. 0
Where the paper says it

Abstract The Muon Collider is one of the most promising future collider facilities with the potential to reach multi-TeV center-of-mass energy and high luminosity. Due to the significant Higgs boson production 1 arXiv:2405.

01216

[9] Tumasyan, A., et al.: A portrait of the Higgs boson by the CMS experiment ten years after the discovery. p. 2

Where the paper says it

3 Tot Stat Exp Th Uncertainty [%] ATLAS and CMS HL-LHC Projection per experiment -1 s = 14 TeV, 3000 fb Total Statistical Experimental Theory 2% 4% Figure 1 Projections of the expected precision of the ATLAS and CMS combination on the Higgs production cross sections (left) and κi coupling modifiers (right) including HL-LHC [1] data. This paper presents the results on the Higgs boson studies obtained at a √ s = 3 TeV MuC with a detailed detector simulation and including the beam-induced background (BIB).

Nature 607(7917), 60–68 (2022) https://doi. p. 1
Where the paper says it

In addition, the paper discusses the detector requirements necessary for obtaining such resolutions and for measuring the Higgs trilinear self-coupling. 1 Introduction The Higgs boson (H) is considered a portal to new physics, because it is connected to some of the fundamental questions about the Universe [1], including the mechanism of Electroweak Symmetry Breaking (EWSB), the origin of the masses, the matter-antimatter asymmetry, and the nature of dark matter.

org/10.1038/s41586-022-04892-x arXiv:arXiv:2207. p. 0
Where the paper says it

Abstract The Muon Collider is one of the most promising future collider facilities with the potential to reach multi-TeV center-of-mass energy and high luminosity. Due to the significant Higgs boson production 1 arXiv:2405.

00043

[13] Blas, J., et al.: The physics case of a 3 TeV muon collider stage (2022) arXiv:2203. p. 0

Where the paper says it

Abstract The Muon Collider is one of the most promising future collider facilities with the potential to reach multi-TeV center-of-mass energy and high luminosity. Due to the significant Higgs boson production 1 arXiv:2405.

0761

[58] Sestini, L.: R&D towards the detector for the Muon Collider. p. 0

Where the paper says it

Preprint submitted to The European Physical Journal C Higgs Physics at a √ s = 3 TeV Muon Collider with detailed detector simulation Paolo Andreettoa , Nazar Bartosikb , Laura Buonincontria,c, Daniele Calzolaric,d , Vieri Candelisee,f, Massimo Casarsae , Luca Castellig,h, Mauro Chiesai , Anna Colaleoj,k, Giacomo Da Molinl , Matthew Forslundm, Luca Giambastiania,c , Alessio Gianellea , Karol Krizkan , Sergo Jindarianio , Anton Lechnerd , Donatella Lucchesia,c, Leo Maresoc , Paola Mastrapasquap , Patrick Meadem, Alessandro Montellaq , Simone Pagan Grisor , Nadia Pastroneb , Lorenzo Sestinia , Rosamaria Vendittij,k, Angela Zazaj,k, Davide Zuliania,c a INFN Sezione di Padova, Padova, Italy. b INFN Sezione di Torino, Torino, Italy.

p. 0
Where the paper says it

Preprint submitted to The European Physical Journal C Higgs Physics at a √ s = 3 TeV Muon Collider with detailed detector simulation Paolo Andreettoa , Nazar Bartosikb , Laura Buonincontria,c, Daniele Calzolaric,d , Vieri Candelisee,f, Massimo Casarsae , Luca Castellig,h, Mauro Chiesai , Anna Colaleoj,k, Giacomo Da Molinl , Matthew Forslundm, Luca Giambastiania,c , Alessio Gianellea , Karol Krizkan , Sergo Jindarianio , Anton Lechnerd , Donatella Lucchesia,c, Leo Maresoc , Paola Mastrapasquap , Patrick Meadem, Alessandro Montellaq , Simone Pagan Grisor , Nadia Pastroneb , Lorenzo Sestinia , Rosamaria Vendittij,k, Angela Zazaj,k, Davide Zuliania,c a INFN Sezione di Padova, Padova, Italy. b INFN Sezione di Torino, Torino, Italy.

PoS EPS-HEP2024, 552 (This reference is listed as [58] in the text but its actual citation in the list is different. I will use the provided list entry for [58]

[10] Accettura, C., et al.: Towards a Muon Collider. p. 0

Where the paper says it

Preprint submitted to The European Physical Journal C Higgs Physics at a √ s = 3 TeV Muon Collider with detailed detector simulation Paolo Andreettoa , Nazar Bartosikb , Laura Buonincontria,c, Daniele Calzolaric,d , Vieri Candelisee,f, Massimo Casarsae , Luca Castellig,h, Mauro Chiesai , Anna Colaleoj,k, Giacomo Da Molinl , Matthew Forslundm, Luca Giambastiania,c , Alessio Gianellea , Karol Krizkan , Sergo Jindarianio , Anton Lechnerd , Donatella Lucchesia,c, Leo Maresoc , Paola Mastrapasquap , Patrick Meadem, Alessandro Montellaq , Simone Pagan Grisor , Nadia Pastroneb , Lorenzo Sestinia , Rosamaria Vendittij,k, Angela Zazaj,k, Davide Zuliania,c a INFN Sezione di Padova, Padova, Italy. b INFN Sezione di Torino, Torino, Italy.

Eur. Phys. J. C 83 (2023) https://doi.org/10.1140/epjc/s10052-023-11889-x arXiv:arXiv:2303. p. 0
Where the paper says it

Abstract The Muon Collider is one of the most promising future collider facilities with the potential to reach multi-TeV center-of-mass energy and high luminosity. Due to the significant Higgs boson production 1 arXiv:2405.

08533

[47] Aryshev, A., et al.: The International Linear Collider: Report to Snowmass 2021 (2022) arXiv:arXiv:2203. p. 0

Where the paper says it

Abstract The Muon Collider is one of the most promising future collider facilities with the potential to reach multi-TeV center-of-mass energy and high luminosity. Due to the significant Higgs boson production 1 arXiv:2405.

0761

[51] Forslund, M., Meade, P.: Precision Higgs width and couplings with a high energy muon collider. p. 1

Where the paper says it

The couplings of the Higgs boson to the elementary fermions and bosons generate the particle masses. The most recent review of the expected experimental precision on such couplings, including projections for the High-Luminosity LHC (HL-LHC), is presented in the Snowmass Energy Frontier report [6].

JHEP 01, 182 (2024) https://doi. p. 0
Where the paper says it

Due to the significant Higgs boson production 1 arXiv:2405. 19314v1 [hep-ex] 29 May 2024

org/10.1007/JHEP01(2024)182 arXiv:arXiv:2308. p. 0
Where the paper says it

Due to the significant Higgs boson production 1 arXiv:2405. 19314v1 [hep-ex] 29 May 2024

02633

[55] Han, T., et al.: Precision test of the muonhiggs coupling at a high-energy muon collider. p. 1

Where the paper says it

cross section in muon collisions at these high energies, the collider can be considered a Higgs factory. It holds the capability to significantly advance our understanding of the Higgs sector to an unprecedented level of precision.

JHEP 12, 162 (2021) https://doi.org/10.1007/jhep12(2021)162 arXiv:arXiv:2108. p. 0
Where the paper says it

Abstract The Muon Collider is one of the most promising future collider facilities with the potential to reach multi-TeV center-of-mass energy and high luminosity. Due to the significant Higgs boson production 1 arXiv:2405.

05362

[57] LHCb collaboration: Performance of new jet techniques based on machine learning for H → b¯b and H → cc¯ searches. LHCBFIGURE-2023-029 (2023) https://doi.org/10.1088/1748-0221/57

[56] Bols, E., et al.: Jet Flavour Classification Using DeepJet. p. 1

Where the paper says it

However, the presence of beam-induced background resulting from the decay of the beam muons poses unique challenges for detector development and event reconstruction. In this paper, the prospects for various measurements of the Higgs boson production cross sections at a √ s = 3 TeV collider are presented using a detailed detector simulation in a realistic environment.

2020 JINST 15(12), 12012 https://doi.org/10.1088/1748-0221/56

[39] Hoecker, A., et al.: TMVA - Toolkit for Multivariate Data Analysis (2009) arXiv:arXiv:physics/0703039 [hep-ph]

[41] Casarsa, M., Lucchesi, D., Sestini, L. p. 0

Where the paper says it

casarsa@ts. it) and Lorenzo Sestini (lorenzo.

: Experimentation at a muon collider (2023) https://doi. p. 0
Where the paper says it

Preprint submitted to The European Physical Journal C Higgs Physics at a √ s = 3 TeV Muon Collider with detailed detector simulation Paolo Andreettoa , Nazar Bartosikb , Laura Buonincontria,c, Daniele Calzolaric,d , Vieri Candelisee,f, Massimo Casarsae , Luca Castellig,h, Mauro Chiesai , Anna Colaleoj,k, Giacomo Da Molinl , Matthew Forslundm, Luca Giambastiania,c , Alessio Gianellea , Karol Krizkan , Sergo Jindarianio , Anton Lechnerd , Donatella Lucchesia,c, Leo Maresoc , Paola Mastrapasquap , Patrick Meadem, Alessandro Montellaq , Simone Pagan Grisor , Nadia Pastroneb , Lorenzo Sestinia , Rosamaria Vendittij,k, Angela Zazaj,k, Davide Zuliania,c a INFN Sezione di Padova, Padova, Italy. b INFN Sezione di Torino, Torino, Italy.

org/10.1146/annurev-nucl-102622-0113

[58] Sestini, L.: R&D towards the detector for the Muon Collider. PoS EPS-HEP2024, 552 (This reference is listed as [58] in the text but its actual citation in the list is different. I will use the provided list entry for [58]

[17] Alexahin, Y., Gianfelice-Wendt, E., Kapin, V.: Muon collider lattice concepts. p. 0

Where the paper says it

Preprint submitted to The European Physical Journal C Higgs Physics at a √ s = 3 TeV Muon Collider with detailed detector simulation Paolo Andreettoa , Nazar Bartosikb , Laura Buonincontria,c, Daniele Calzolaric,d , Vieri Candelisee,f, Massimo Casarsae , Luca Castellig,h, Mauro Chiesai , Anna Colaleoj,k, Giacomo Da Molinl , Matthew Forslundm, Luca Giambastiania,c , Alessio Gianellea , Karol Krizkan , Sergo Jindarianio , Anton Lechnerd , Donatella Lucchesia,c, Leo Maresoc , Paola Mastrapasquap , Patrick Meadem, Alessandro Montellaq , Simone Pagan Grisor , Nadia Pastroneb , Lorenzo Sestinia , Rosamaria Vendittij,k, Angela Zazaj,k, Davide Zuliania,c a INFN Sezione di Padova, Padova, Italy. b INFN Sezione di Torino, Torino, Italy.

2018 JINST 13, 11002 https://doi.org/10.1088/1748-0221/P5

[49] Giambastiani, L.: Study of Z boson production in association with jets at LHCb and at a future Muon Collider. p. 0

Where the paper says it

Abstract The Muon Collider is one of the most promising future collider facilities with the potential to reach multi-TeV center-of-mass energy and high luminosity. Due to the significant Higgs boson production 1 arXiv:2405.

PhD thesis, University of Padua, Padua, Italy (2024)

[50] Li, P., Liu, Z., Lyu, K.-F.: Higgs boson width and couplings at high energy muon colliders with forward muon detection. p. 0

Where the paper says it

Abstract The Muon Collider is one of the most promising future collider facilities with the potential to reach multi-TeV center-of-mass energy and high luminosity. Due to the significant Higgs boson production 1 arXiv:2405.

Phys. Rev. D 109(7), 073009 (2024) https://doi. p. 0
Where the paper says it

Due to the significant Higgs boson production 1 arXiv:2405. 19314v1 [hep-ex] 29 May 2024

org/10.1103/PhysRevD.109.73

[52] Forslund, M.: Single Higgs Precision at a Muon Collider. p. 1

Where the paper says it

cross section in muon collisions at these high energies, the collider can be considered a Higgs factory. It holds the capability to significantly advance our understanding of the Higgs sector to an unprecedented level of precision.

In: Muon Collider Physics and Detector Workshop, Fermilab, Batavia IL, USA (2022)

[48] Abramowicz, H., et al.: Higgs physics at the CLIC electron–positron linear collider. p. 1

Where the paper says it

Linear and circular e +e − machines have been the subject of debate for a long time as well as µ +µ − colliders. Recently µ +µ − collisions are regaining attention on the international scene, thanks to the impressive physics potential and to new studies on technical feasibility [10].

Eur. Phys. J. C 77(7), 475 (2017) https://doi.org/10.1140/epjc/s10052-017-4968-5 arXiv:arXiv:1608. p. 0
Where the paper says it

Abstract The Muon Collider is one of the most promising future collider facilities with the potential to reach multi-TeV center-of-mass energy and high luminosity. Due to the significant Higgs boson production 1 arXiv:2405.

07538

[23] Muon Collider Software https://github.com/MuonColliderSoft

[24] ILC Soft. https://ilcsoft. p. 4

Where the paper says it

In this paper, a right-handed reference system is assumed with the origin at the center of the detector, the nominal collision point: the z axis is parallel to the beam direction, the y axis is vertical, and the x axis points to the center of the collider ring. The MuC software framework [23], based on the ILCSoft [24] framework, has been employed for the detector simulation studies in this paper.

desy.de/portal

Figure 1

Figure 1 Projections of the expected precision of the ATLAS and CMS combination on the Higgs production cross sections (left) and κi coupling modifiers (right) including HL-LHC [1] data

Figure 2

Figure 2 shows the main features of particles produced by the in-flight decays of muons and subsequent interactions with the machine, as they enter the detector outer surface

Figure 3

Figure 3 Cross sections for the most important singleHiggs production processes as a function of the center-ofmass energy [25]

Figure 4

Figure 4 Feynman tree-level diagrams representing the major contributions to the double-Higgs production at √s = 3 TeV

Figure 5

Figure 5 The detector model used in the detailed simulation, view in the y-z plane

Figure 6

Figure 6 Example of the di-jet invariant mass fit for one of the pseudo-experiments used to extract the H → b¯b yield and uncertainty

Figure 7

Figure 7 Distributions of the BDT outputs to separate the H → WW∗ signal from the background processes without a Higgs bosons (left) and with a Higgs boson (right)

Figure 8

Figure 8 Stack of the mµµ distributions for the selected signal and background events [41]

Figure 9

Figure 9 Distribution of the BDT output of the signal and major physics background process.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved event reconstruction algorithms can be adapted to manage beam-induced background by applying cutting-edge clustering algorithms capable of identifying and rejecting hits associated with low-momentum BIB particles, aiming to reduce spurious tracks.

  2. The AI system can perform high precision measurements of Higgs boson production cross sections by utilizing a detailed detector simulation that includes the beam-induced background, demonstrating that the precision achieved is comparable to that claimed by MuC parametric simulation studies.

  3. The AI system can determine the trilinear Higgs self-coupling with an accuracy surpassing HL-LHC projections by exploiting the kinematic properties of double Higgs events and training two independent Multilayer Perceptrons to separate the SM signal from physics backgrounds.

  4. The AI system can establish fundamental detector requirements for Higgs physics by analyzing performance across various objects, determining that the average transverse momentum of particles from Higgs decays is of the same order (∼100 GeV) at both √s = 3 TeV and √s = 10 TeV.

  5. The AI system can guide future detector design by providing specific object requirements, such as muons ∆pT pT= 0.4% and b-jets ∆pT pT= 15%, which are derived from detailed simulations to ensure statistical sensitivity comparable with parametric simulations.

Abstract

The Muon Collider is one of the most promising future collider facilities with the potential to reach multi-TeV center-of-mass energy and high luminosity. Due to the significant Higgs boson production cross section in muon collisions at these high energies, the collider can be considered a Higgs factory. It holds the capability to significantly advance our understanding of the Higgs sector to an unprecedented level of precision. However, the presence of beam-induced background resulting from the decay of the beam muons poses unique challenges for detector development and event reconstruction. In this paper, the prospects for various measurements of the Higgs boson production cross sections at a sqrt s =3 TeV collider are presented using a detailed detector simulation in a realistic environment. The study demonstrates the feasibility of achieving high precision measurements of the Higgs boson production cross sections with the current state-of-the-art detector design. In addition, the paper discusses the detector requirements necessary for obtaining such resolutions and for measuring the Higgs trilinear self-coupling.

Sources

Related papers