Clay metaBrick-based motif to enhance thermal and acoustic insulation
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: We're looking at the paper: "Clay metaBrick-based motif to enhance thermal and acoustic insulation".
Mira: Here's the gist of the paper. Clay metaBrick-based Motif to Enhance Thermal and Acoustic Insulation explores using Helmholtz resonators in clay hollow bricks to create metaBricks that significantly improve sound transmission loss and thermal resistance while maintaining acceptable compressive strength Acoustic metamaterials have gained popularity as promising materials for enhancing noise reduction.
Kai: This study explores the use of Helmholtz resonators (HRs) in standard clay hollow bricks to transform them into metaBricks, which are designed based on metamaterial principles.
Mira: The goal is to evaluate the acoustic and thermal performance of walls constructed with clay metaBricks, focusing on sound transmission loss and heat resistance.
Kai: Design and Characterization The metaBrick design consists of an array of brick-shaped units with hollow cores, featuring slits at the top and bottom to create Helmholtz resonators which can attenuate sound and reduce heat transfer.
Title and authors: Kai: So, let's talk about the title and who put this paper out there. It’s "Clay metaBrick-based motif to enhance thermal and acoustic insulation." The authors are Lemkalli, Bensallam, Kadic, Guenneau, Jakjoud, Mirzavieh, and Achaoui.
Mira: These authors seem to be coming from a mix of materials science and physics research. They are the ones who put this concept of using Helmholtz resonators in standard clay hollow bricks into practice for both sound and heat control.
Lev: From my side, I'm wondering about the material choice itself, clay. Clay is a very common building material, so if this thing works well acoustically and thermally with it, that would be a big deal for practical application.
Kai: Yeah, the paper focuses heavily on how those specific geometric features—the slits—actually translate into measurable sound loss and heat resistance in the final wall structure.
Mira: They are essentially testing if you can engineer these structures to manipulate waves in both the air and through the solid material itself, which is what metamaterial theory promises.
Lev: It’s about moving from just studying individual components to designing a whole system that performs better than its standard counterpart under real-world conditions.
The paper's summary: Kai: So, to summarize what they did, they took the standard clay hollow brick and modified it into a metaBrick by adding those specific slits at the top and bottom of each unit.
Mira: Those slits create Helmholtz resonators that are designed to attenuate sound waves and also reduce heat transfer between the inside and outside of the wall.
Lev: The paper sets up a multiphysics model to solve how those acoustic waves propagate in both air and solid material simultaneously, which is necessary for this kind of analysis.
Kai: They focused on a specific set of dimensions: the metaBrick unit is ten centimeters wide, twenty-five centimeters long, and twenty centimeters high.
Mira: Based on simulations they found that using slits with a width of zero point five centimeter and a length of twenty-five centimeters gave them the best results for sound transmission loss.
Lev: So you have the geometry determined by simulation before you even get to the physical testing phase, which is smart because it cuts down on trial and error time later.
Kai: They found that this specific design reduces sound transmission by twenty decibels across a broad frequency range from five hundred hertz up to three thousand five hundred hertz.
The paper's improvements: Mira: Moving beyond just the basic design, the paper shows how these metaBricks perform thermally too. They used a transient heat equation to see how the temperature changes inside when exposed to a specific outer temperature.
Lev: And they found that this arrangement kept the inner temperature much lower than what you’d expect from a standard brick under similar heating conditions.
Kai: Experimentally, they saw the inner temperature in their metaBrick wall actually reach up to forty eight point five degrees Celsius, which is a forty six percent reduction compared to fifty five degrees Celsius for the standard brick.
Mira: That's a solid thermal gain because it means better insulation performance in terms of reducing heat flow into the building.
Lev: But there’s always a trade-off when you introduce new geometry; they admitted that this structural change reduces the compressive strength by thirty three percent, though they noted it stays above standard requirements.
Kai: So, the improvement is clear: better sound blocking up to twenty decibels and significantly better thermal insulation performance while keeping the material within acceptable structural limits.
Conclusion: Mira: So, wrapping this up for "Clay metaBrick-based motif to enhance thermal and acoustic insulation," the main point is that incorporating Helmholtz resonators into hollow bricks creates a barrier that effectively cuts down on sound transmission and heat diffusion.
Kai: They found sound transmission loss can go up to twenty decibels in the frequency range from two hundred hertz up to three point five kilohertz.
Lev: For real-world application, this means potentially more comfortable buildings with lower noise and less energy used for heating and cooling, which is what we’re aiming for.
Mira: It really shows how using metamaterials can lead to innovative building materials that have better acoustic and thermal insulation properties than traditional methods.
Kai: I think the implication here is that we can start thinking about how these engineered structures could be used to reduce noise pollution and improve energy efficiency in construction projects.
Lev: From a hardware perspective, it’s promising, but the next step is really figuring out how to scale this up reliably for manufacturing large-scale components.
Mira: Definitely. Next up, we'll look at how the authors suggested they could take these findings and use them to design even more complex systems.
Brahim Lemkalli, Saad Bensallam, Muamer Kadic, Sébastien Guenneau, Hicham Jakjoud, Abdellah Mir, Younes Achaoui
Université Marie et Louis Pasteur Institut FEMTO-ST CNRS Laboratory of Optics Information Processing Mechanics Energetics and Electronics Department of Physics Moulay Ismail University Hassania School of Public Works The Blackett Laboratory Imperial College London UMI 2004 Abraham de Moivre CNRS
cond-mat.mtrl-sci, physics.app-ph
Submitted: 2023-10-08
Updated: 2025-07-07
Comments: 14 pages, 10 figures
Journal ref: J. Acoust. Soc. Am. 158, 28-37 (2025)
DOI: 10.1121/10.0037086
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 76/100
The gist: Clay metaBrick-based Motif to Enhance Thermal and Acoustic Insulation explores using Helmholtz resonators in clay hollow bricks to create metaBricks that significantly improve sound transmission loss…
Key concepts
- Helmholtz Resonators (HRs)
- These are specialized cavities with a narrow opening at one end. When sound waves hit them, they resonate and absorb the energy, effectively muffling the sound. In the metaBrick design, these resonators are created using slits in the brick structure to control how sound waves interact with the material.
- Acoustic Metamaterials
- These are artificial structures designed to control sound waves in ways that natural materials cannot. By arranging simple shapes like bricks with specific internal features (like slits), engineers can create materials that selectively block or redirect sound, leading to superior noise reduction properties.
- Thermal Insulation Performance
- This refers to a material's ability to resist the flow of heat. The study found that the metaBrick structure was better at insulating against temperature changes than standard bricks. This means less heat escapes in cold weather and less heat enters in hot weather, leading to lower indoor temperatures.
- Compressive Strength
- This is a measure of how much force a material can withstand before it breaks or deforms permanently. The study noted that adding the slits for sound control reduced the brick's compressive strength by 33%. This indicates a trade-off: better insulation often means slightly weaker structural integrity.
Terminology
Summary
Clay metaBrick-based Motif to Enhance Thermal and Acoustic Insulation explores using Helmholtz resonators in clay hollow bricks to create metaBricks that significantly improve sound transmission loss and thermal resistance while maintaining acceptable compressive strength
Introduction and Motivation
Acoustic metamaterials have gained popularity as promising materials for enhancing noise reduction. This study explores the use of Helmholtz resonators (HRs) in standard clay hollow bricks to transform them into metaBricks, which are designed based on metamaterial principles. p. 0 Here, we
explore the use of metamaterials, based on Helmholtz resonators (HRs), to enhance the performance of standard clay
hollow brick. By incorporating HRs in the upper and lower hollows, we transform the standard brick into metaBrick,
which is essentially designed based on metamaterial principles. By incorporating HRs in the upper and lower hollows, we transform the standard brick into metaBrick,
which is essentially designed based on metamaterial principles. We evaluate the acoustic and thermal performance of
walls constructed with clay metaBricks, focusing on sound transmission loss and heat resistance. By incorporating HRs in the upper and lower hollows, we transform the standard brick into metaBrick,
which is essentially designed based on metamaterial principles. We evaluate the acoustic and thermal performance of
walls constructed with clay metaBricks, focusing on sound transmission loss and heat resistance.Where the paper says it
Where the paper says it
Where the paper says it
Design and Characterization
The metaBrick design consists of an array of brick-shaped units with hollow cores, featuring slits at the top and bottom to create Helmholtz resonators which can attenuate sound and reduce heat transfer. The dimensions used in this study are 10 cm in width, 25 cm in length, and 20 cm in height. p. 2 These features create Helmholtz resonators within the metaBrick, which can
attenuate sound and reduce heat transfer. The dimensions of the metaBrick used in this study
are 10 cm in width, 25 cm in length, and 20 cm in height. The dimensions of the metaBrick used in this study
are 10 cm in width, 25 cm in length, and 20 cm in height. For the slits on the top and bottom
of the metabrick, we conduct a series of simulations (see Figure 9) to study the effect of slit
size on the sound transmission loss. The dimensions of the metaBrick used in this study
are 10 cm in width, 25 cm in length, and 20 cm in height. For the slits on the top and bottom
of the metabrick, we conduct a series of simulations (see Figure 9) to study the effect of slit
size on the sound transmission loss. The metaBrick-based wall is illustrated in Figure 1(a). The material
parameters used in this study are depicted in Table 1.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Acoustic Performance Analysis
The acoustic response is analyzed using a multiphysics model to solve the acoustic wave propagation equations in both air and solids. The transmission is calculated using equation (5) for the frequency range of 20 Hz to 5 kHz. p. 3 For the
meshing, we take into account a maximum element size of λmin/10 and tetrahedral elements. We then calculate the transmission in the frequency range (20 Hz to 5 kHz) for each brick,
using equation (5). For the
meshing, we take into account a maximum element size of λmin/10 and tetrahedral elements. We then calculate the transmission in the frequency range (20 Hz to 5 kHz) for each brick,
using equation (5). It is evident that
the standard brick has a higher sound transmission compared to the metaBrick, which is due
to the tiny guide between the two successive bricks creating a Fabry-Perot resonator that
has a resonance at nλ/2 (where λ is the wavelength). The presence of slits, i. The presence of slits, i. , Helmholtz
resonators, reduces the sound transmission by 20 dB across a broad frequency range from 500
Hz to 3500 Hz, beyond which the limit of diffraction becomes apparent. The presence of slits, i. , Helmholtz
resonators, reduces the sound transmission by 20 dB across a broad frequency range from 500
Hz to 3500 Hz, beyond which the limit of diffraction becomes apparent. Figure 4(b) reports a comparative analysis of the thermal properties of two types of bricks,
namely the standard brick (curve in red) and the metaBrick (curve in blue). The results
demonstrate that the metaBrick exhibits superior thermal insulation properties compared to
the standard brick. Figure 4(b) reports a comparative analysis of the thermal properties of two types of bricks,
namely the standard brick (curve in red) and the metaBrick (curve in blue). The results
demonstrate that the metaBrick exhibits superior thermal insulation properties compared to
the standard brick.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Thermal Performance and Structural Integrity
The thermal analysis utilizes the transient heat equation (6) to calculate the temperature distribution within unit cells. The metaBrick exhibits superior thermal insulation properties, maintaining a lower inner temperature compared to the standard brick after exposure to a sinusoidal outer temperature. p. 5 The results
demonstrate that the metaBrick exhibits superior thermal insulation properties compared to
the standard brick. After 6 hours of exposure to the sinusoidal outer temperature, the interior
temperature of the metaBrick reaches a maximum of 27 °C, while the standard brick reaches
29 °C, resulting in a 2 °C difference in the peak temperature and a 2 °C difference in the lowest
temperature. It is clearly seen that the numerical
and the experimental results are in good agreement. The inner temperature variation showed that the metaBrick wall was highly effective in
thermal insulation, as evidenced by the lower variation of the inner temperature compared
to the standard brick. The inner temperature variation showed that the metaBrick wall was highly effective in
thermal insulation, as evidenced by the lower variation of the inner temperature compared
to the standard brick. After 600 min of exposure to the outer temperature, as one can see,
the standard brick wall exhibited a temperature variation of up to 55 °C (38% of reduction),
while the metaBrick wall exhibited an inner temperature of up to 48. However,
compressive strength is reduced by 33%, though it remains above the standard requirements for building materials. These findings indicate that metaBrick is a promising building material, offering improved sound and thermal insulation.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Conclusion and Implications
The presence of Helmholtz resonators in the metaBrick design creates a barrier that effectively reduces sound transmission and heat diffusion. The acoustic insulation becomes higher with a sound transmission of up to 20 dB in the frequency range of 200 Hz to 3. p. 9 This is in contrast to a standard brick, which does not have the ability
to attenuate sound or heat in this way. The acoustic insulation becomes higher with a sound
transmission of up to 20 dB in the frequency range of 200 Hz to 3. This is in contrast to a standard brick, which does not have the ability
to attenuate sound or heat in this way. The acoustic insulation becomes higher with a sound
transmission of up to 20 dB in the frequency range of 200 Hz to 3. The reason for the strength loss is due to the existence of
slits in metaBrick, which causes the compressive strength to decrease by approximately 7 MPa,
which is equivalent to 33% when compared with standard brick. This metaBrick results in more comfortable and environmentally friendly buildings, reducing
energy consumption and noise transmission in the construction industry, and is easy to manufacture by just adding some steel beams to the existing molds in the industries. These findings can be useful for researchers, designers, and engineers
who seek to develop more sustainable and environmentally friendly building materials that offer
better acoustic and thermal insulation properties. The concept of metamaterials is a relatively new path in material design, and our study
shows that it has immense potential for revolutionizing the construction industry.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Pruning redundant reasoning tokens
The paper investigates the use of Helmholtz resonators in clay hollow bricks to create metaBricks that significantly improve sound transmission loss and thermal resistance while maintaining acceptable compressive strength. The goal is to evaluate the acoustic and thermal performance of walls constructed with clay metaBricks, focusing on sound transmission loss and heat resistance.
How the training signal is built
The numerical model used in the acoustic study is based on solving the acoustic wave propagation equations in both air and solids. The transmission is calculated using equation (5) for the frequency range of 20 Hz to 5 kHz. A multiphysics model is used to solve the acoustic wave propagation equations in both air and solids for the sound transmission analysis. p. 2 Besides, ω is the angular frequency of the acoustic wave, E is the
Young’s modulus, and ν is the Poisson’s ratio. A multiphysics model is used to solve the acoustic wave propagation equations in both air
and solids for the sound transmission analysis.Where the paper says it
Where the gains come from
The presence of slits, i.e., Helmholtz resonators, reduces the sound transmission by 20 dB across a broad frequency range from 500 Hz to 3500 Hz. The metaBrick exhibits superior acoustic insulation properties as evidenced by its transmission curve compared to the standard brick. The presence of the Helmholtz resonators in the metaBrick design allows for a significant reduction in sound transmission and thermal conductivity. p. 9 This metaBrick results in more comfortable and environmentally friendly buildings, reducing
energy consumption and noise transmission in the construction industry, and is easy to manufacture by just adding some steel beams to the existing molds in the industries. The presence
of the Helmholtz resonators in the metaBrick design allows for a significant reduction in sound
transmission and thermal conductivity, making it a promising candidate for use in building
materials applications. The acoustic insulation becomes higher with a sound
transmission of up to 20 dB in the frequency range of 200 Hz to 3. The same occurs
for the thermal insulation, which became more efficient with a rate of 8% compared with the
standard brick.Where the paper says it
Where the paper says it
The presence of slits in alveoli in the metaBrick structure creates Helmholtz resonators, which can effectively attenuate both sound and heat. The findings of this study indicate that metaBrick has a strong potential for improving insulation performance in building materials with a compressive strength that is high enough for the construction sector. p. 9 5
4 13
5 12
The standard brick has an average compressive strength of around 19 MPa, whereas the
metaBrick has an average compressive strength of about 12 MPa. Although metaBrick has lost
strength, it still possesses a relatively high compressive strength that is more than enough for
the building sector (7.Where the paper says it
The experimental setups used in this study have been mounted to investigate the acoustic and thermal behaviors of the novel metaBrick and compared to a standard brick. The sound pressure level in the box is measured with a calibrated measurement microphone. p. 7 2 Results 3 CHARACTERISTICS OF A METABRICK WALL
is used to generate the sound, which is at a sufficiently high amplitude in order to get a sound
pressure level in the receiving room without the influence of background noise, and the frequency
response covers the relevant measurement range, which is at least from 50 Hz to 5000 Hz. The sound pressure level in the box is measured with a calibrated measurement microphone.Where the paper says it
The experimental results were compared with the numerical simulations to validate the accuracy of our modeling approach. The metaBrick wall was highly effective in thermal insulation, as evidenced by the lower variation of the inner temperature compared to the standard brick. p. 8 It is clearly seen that the numerical
and the experimental results are in good agreement. The inner temperature variation showed that the metaBrick wall was highly effective in
thermal insulation, as evidenced by the lower variation of the inner temperature compared
to the standard brick. It is clearly seen that the numerical
and the experimental results are in good agreement. The inner temperature variation showed that the metaBrick wall was highly effective in
thermal insulation, as evidenced by the lower variation of the inner temperature compared
to the standard brick. 5 °C, which is equivalent to 8% as a rate of thermal reduction. Furthermore, the outer temperature variation was also significantly lower than that of the
standard brick, indicating its effectiveness in thermal insulation. 5 °C, which is equivalent to 8% as a rate of thermal reduction. Furthermore, the outer temperature variation was also significantly lower than that of the
standard brick, indicating its effectiveness in thermal insulation.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
The results obtained from the acoustic analysis provided valuable insights into the effectiveness of the metaBrick design in attenuating sound, as shown in Figure 7. The analysis of the four signals obtained, namely the excitation chirp signal (in violet), the measured excitation signal without walls (in blue), steel box sound transmission (in pink), standard brick sound transmission (in black), and metaBrick signal transmission (in red) enabled a comparison of their respective acoustic behaviors. p. 7 2 Results
The results obtained from the acoustic analysis provided valuable insights into the effectiveness of the metaBrick design in attenuating sound, as shown in Figure 7. The analysis of the
four signals obtained, namely the excitation chirp signal (in violet), the measured excitation
signal without walls (in blue), steel box sound transmission (in pink), standard brick sound
transmission (in black), and metaBrick signal transmission (in red), enabled a comparison of
their respective acoustic behaviors. 2 Results
The results obtained from the acoustic analysis provided valuable insights into the effectiveness of the metaBrick design in attenuating sound, as shown in Figure 7. The analysis of the
four signals obtained, namely the excitation chirp signal (in violet), the measured excitation
signal without walls (in blue), steel box sound transmission (in pink), standard brick sound
transmission (in black), and metaBrick signal transmission (in red), enabled a comparison of
their respective acoustic behaviors. The analysis of the
four signals obtained, namely the excitation chirp signal (in violet), the measured excitation
signal without walls (in blue), steel box sound transmission (in pink), standard brick sound
transmission (in black), and metaBrick signal transmission (in red), enabled a comparison of
their respective acoustic behaviors. The numerical and experimental results are presented in
Figure 7(a) and (b), respectively.Where the paper says it
Where the paper says it
Where the paper says it
The thermal study involved measuring the temperature variation inside and outside the iron box over a period of 600 minutes while exposed to a temperature of 90 °C. The results of this study are presented in Figure 8. p. 8 Inner and outer temperature evolution is measured for both numerical and experimental
studies. The results of this study are presented in Figure 8.Where the paper says it
The inner temperature variation showed that the metaBrick wall was highly effective in thermal insulation, as evidenced by the lower variation of the inner temperature compared to the standard brick. After 600 min of exposure to the outer temperature, as one can see, the standard brick wall exhibited a temperature variation of up to 55 °C (38% of reduction), while the metaBrick wall exhibited an inner temperature of up to 48. p. 8 The inner temperature variation showed that the metaBrick wall was highly effective in
thermal insulation, as evidenced by the lower variation of the inner temperature compared
to the standard brick. After 600 min of exposure to the outer temperature, as one can see,
the standard brick wall exhibited a temperature variation of up to 55 °C (38% of reduction),
while the metaBrick wall exhibited an inner temperature of up to 48. 11201, Zitoune, Meknes, Morocco
3Hassania School of Public Works, Casablanca, Morocco
4The Blackett Laboratory, Physics Department, Imperial College London, SW7 2AZ, London,
UK
5UMI 2004 Abraham de Moivre-CNRS, Imperial College London, SW7 2AZ, London, UK
6Laboratory of Energy Engineering, Materials and Systems, National Schools of Applied Sciences, Ibn Zohr University, Agadir, Morocco
∗
lemkallibrahim@gmail. com
Acoustic metamaterials have gained popularity as promising materials for enhancing noise reduction.Where the paper says it
Where the paper says it
The results obtained from the acoustic analysis provided valuable insights into the effectiveness of the metaBrick design in attenuating sound, as shown in Figure 7. The analysis of the four signals obtained, namely the excitation chirp signal (in violet), the measured excitation signal without walls (in blue), steel box sound transmission (in pink), standard brick sound transmission (in black), and metaBrick signal transmission (in red) enabled a comparison of their respective acoustic behaviors.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Incorporate metaBrick design parameters into a multi-objective optimization algorithm for building material selection to simultaneously maximize sound transmission loss and thermal resistance while constraining compressive strength within acceptable limits.
-
Develop a predictive model that uses finite element method simulations, as described in the paper, to rapidly estimate the acoustic and thermal performance of novel brick geometries before extensive experimental testing is required.
-
Create an AI system capable of analyzing experimental acoustic data (Figure 7b) and numerical transmission curves to automatically determine the optimal slit width for a given target frequency range based on the observed sound transmission loss.
-
Design a machine learning model that correlates material properties (like Young's modulus, density, thermal conductivity from Table 1) with the resulting thermal insulation performance, allowing for virtual material screening.
-
Implement an automated design tool that generates optimized geometries for hollow bricks by iteratively adjusting slit dimensions to meet specified acoustic attenuation targets while monitoring the impact on compressive strength.
Abstract
Acoustic metamaterials have gained popularity as promising materials for enhancing noise reduction. Here, we explore the use of metamaterials, based on Helmholtz resonators (HRs), to enhance the performance of standard clay hollow brick. By incorporating HRs in the upper and lower hollows, we transform the standard brick into metaBrick, which is essentially designed based on metamaterial principles. We evaluate the acoustic and thermal performance of walls constructed with clay metaBricks, focusing on sound transmission loss and heat resistance. Both the finite element method and experimental analysis were employed to highlight the performance of metaBricks compared to standard clay bricks. Results show that metaBricks significantly enhance acoustic and thermal insulation, achieving an attenuation of 20 across a broad frequency range from 500 to 2500 and an 8 % increase in thermal resistance. However, compressive strength is reduced by 33 %, though it remains above the standard requirements for building materials. These findings indicate that metaBrick is a promising building material, offering improved sound and thermal insulation.
Sources
- Controlling the Propagation of Flexural Elastic Waves With Ceramic Metatiles
- Bi-functional metamaterial based on Helmholtz resonators for sound and heat insulation
Related papers
- Structural contribution to light-induced gap suppression in Ta 2 NiSe 5
- Anatomy of fast current-induced skyrmion motion in synthetic antiferromagnets
- Magnetic control of an exciton-polariton condensate in a van der Waals magnet
- High-pressure elastic properties of GeO2 polymorphs up to 120 GPa
- Decoupling Strain-Rate Sensitivity and Deformation Length Scale Effects in Neutron-Irradiated Tungsten: A Coupled Nano-Indentation, HR-EBSD and Crystal Plasticity Study
- Magnetism modulation in Co3Sn2S2 by current-assisted domain wall motion