A pre-time-zero spatiotemporal microscopy technique for the ultrasensitive determination of the thermal diffusivity of thin films

arXiv:2211.04999 · cond-mat.mes-hall · Submitted 2022-11-09 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.

Kai: We're looking at the paper: "A pre-time-zero spatiotemporal microscopy technique for the ultrasensitive determination of the thermal diffusivity of thin films".

Mira: Here's the gist of the paper. A pre-time-zero spatiotemporal microscopy technique for the ultrasensitive determination of the thermal diffusivity of thin films enables direct measurement of in-plane thermal diffusivity without requiring material input parameters or strong heating, which is crucial for observing novel nanoscale thermal transport phenomena Core Methodology The technique exploits residual spatial temperature profiles obtained through transient reflectivity when probe pulses arrive before pump pulses, corresponding to an effective pump-probe time delay of 13 ns determined by the laser system's repetition rate.

Kai: This pre-time-zero approach allows probing the diffusion of long-lived excitations created by previous pump pulses with nanometer accuracy, which is particularly powerful for following in-plane heat diffusion in thin films.

Mira: The method monitors the spatial broadening of a pump-excited spot as a function of pump-probe time delay, where the probe arrives before the pump.

Kai: Experimental Setup and Detection The experimental setup involves an optical pump pulse exciting a small region, followed by a spatially scanned probe beam that interrogates the system at a small negative pump-probe delay time.

Title and authors: Kai: So we're looking at this paper, "A pre-time-zero spatiotemporal microscopy technique for the ultrasensitive determination of the thermal diffusivity of thin films." It seems like they’re trying to measure how fast heat moves in these thin materials without needing tons of extra material constants.

Mira: Exactly. It's about getting rid of needing those input parameters for things like temperature coefficient or absorption, which is a big hurdle when you try to model thermal transport in nanoscale devices.

Lev: From the hardware side, if we're talking about measuring thermal transport, we gotta be thinking about how much heat we are actually putting into the system and how well our measurement system can resolve those subtle changes.

Kai: Well, this technique uses a pump-probe setup where the probe arrives before the pump pulse. This lets them look at a residual spatial temperature profile that comes from previous pump pulses, which is key for tracking diffusion in thin films over time.

Mira: And they use that residual signal to measure the in-plane thermal diffusivity D directly by comparing it to a simple model based on Fourier's law of heat conduction. That’s the core idea of this paper, "A pre-time-zero spatiotemporal microscopy technique for the ultrasensitive determination of the thermal diffusivity of thin films."

Lev: It sounds like they are trying to bypass those complex calculations that usually have to be done before you can even start the experiment.

Kai: Right, and they applied this to transition metal dichalcogenides, specifically MoSe2, WSe2, MoS2, and WS2 films around fifteen nanometers thick. They did this in air at room temperature because vacuum just made the out-of-plane heat sinking too efficient for the effect to be noticeable.

Mira: That’s an important detail; they are noting that it's sensitive to sub-Kelvin temperature changes when using a probe wavelength near the exciton resonance, which is where reflection is particularly sensitive to lattice temperature.

Lev: Sub-Kelvin sensitivity is interesting because that means we're talking about detecting heat generation from the pump pulses that’s incredibly small, maybe less than one Kelvin.

Kai: The quantitative results they got for MoSe2 were a thermal diffusivity of zero point one eight plus or minus zero point zero two centimeters squared per second, which they compared to their own ab initio simulations using density functional theory and also with literature values.

Mira: That comparison is what makes it strong; they show agreement with both theoretical calculations and existing experimental data, suggesting the method works as intended for this material family.

Lev: So, if we were building real hardware, running this setup would depend heavily on the stability of those long-lived excitations they are using to probe.

Kai: The paper mentions that a main strength is that it lets you determine thermal diffusivity by comparing data to a simple description based on Fourier's heat law without needing any material input parameters like temperature coefficient or interfacial thermal conductance.

Title and authors: Mira: That’s significant because those parameters are often really hard to measure accurately for these layered materials, and this technique avoids that dependency entirely.

Lev: Bypassing the need for many material properties simplifies the experimental setup in terms of what you need to know beforehand.

Kai: It also opens up possibilities where diffusive transport breaks down, allowing them to explore regimes like ballistic or hydrodynamic phonon transport, which is relevant when dealing with low-dimensional materials.

Mira: And they can even use these material-specific exciton resonances to study more complex van der Waals heterostructures by modeling thermal behavior in novel combinations of materials.

Lev: That would be a big step for predicting how heat moves when you stack different layers on top of each other, which is where error correction overhead might become relevant later on.

Kai: To wrap up this paper, the team has introduced this pre-time-zero spatiotemporal microscopy technique for the ultrasensitive determination of the thermal diffusivity of thin films. They showed it works well for suspended TMD films like MoSe2, WSe2, MoS2, and WS2.

Mira: The implication is that we can get a direct measurement of in-plane thermal diffusivity without needing material input parameters or strong heating.

Lev: It's a simple way to characterize the transport properties of these materials directly.

Kai: We have explored how this method allows for the determination of thermal diffusivities by comparing experimental spatial profiles to Fourier’s law, and they found zero point one eight plus or minus zero point zero two centimeters squared per second for MoSe2.

Mira: The main thing we're seeing is the sub-Kelvin temperature sensitivity when probing near the exciton resonance, which lets us detect heat generation from pump pulses less than one Kelvin away.

Lev: For our hardware goals, that level of sensitivity means we need to ensure our measurement system can handle those very small reflected signal changes without noise dominating.

Kai: So, this method is a sensitive and accurate way of determining the thermal diffusivity for these materials by exploiting the pre-time-zero spatial profile.

Mira: It’s a powerful tool for studying diffusion processes in a large variety of systems, especially when you look at how it handles different transport regimes.

Lev: We're seeing that this technique is applicable to a broad range of material systems, which is good for testing the limits of what we can measure.

Kai: It really provides a simple way to determine thermal diffusivity without needing knowledge of temperature coefficient or thickness or interfacial thermal conductance.

Mira: So, if you only listen to this show, just remember that this paper shows how you can measure in-plane thermal diffusivity directly by comparing the spatial profile at a small negative pump-probe delay time.

The paper's summary: Kai: So, this paper introduces a new way to measure how fast heat spreads in thin films by looking at residual temperature patterns when you use a pump before a probe pulse arrives, which is called pre-time-zero spatiotemporal microscopy.

Mira: Exactly, it’s about getting that direct measurement of thermal diffusivity without needing those material input parameters we usually have to guess or measure separately.

Lev: So the core idea is exploiting those residual spatial temperature profiles from previous pump pulses to track diffusion in thin films with nanometer accuracy.

Kai: Right, it monitors how a pump-excited spot broadens as you change that negative pump-probe time delay, which is when the probe actually arrives before the pump.

Mira: And they define that transient reflectivity as the difference between reflection with and without the pump pulse, which gives them a spatial temperature profile delta T over space alpha and y.

Lev: In their setup, they use a mode-locked laser at seven six MHz for pumping at one thousand thirty zero nanometers and a tunable signal output for probing.

Kai: The detection is done by a silicon photodiode which gets demodulated at the modulation frequency, usually in the kilohertz range.

Mira: They applied this to free-standing transition metal dichalcogenides like MoSe2, WSe2, MoS2, and WS2 films that are around fifteen nanometers thick.

Lev: They did it in air at room temperature because vacuum just made the heat sinking too efficient for this effect to be visible.

Kai: What’s interesting is they found it’s sensitive to sub-Kelvin temperature changes when probing with a wavelength close to the exciton resonance, where reflection is very sensitive to lattice temperature.

Mira: That sub-Kelvin sensitivity means we can detect heat generation from the pump pulses that's less than one Kelvin away, which is crucial for studying low-energy phonon heat diffusion in electronic and optoelectronic devices.

Lev: For real hardware running this, that level of sensitivity means our measurement system has to be really stable to handle those tiny reflected signal changes without noise overwhelming it.

Kai: The paper got the thermal diffusivity D by comparing their experimental spatial profile to a simple model based on Fourier's law of heat conduction, which doesn't require any material input parameters.

Mira: And for MoSe2 specifically, they extracted a thermal diffusivity of zero point one eight plus or minus zero point zero two centimeters squared per second.

Lev: That result is consistent with ab initio simulations using density functional theory and also with other experimental values in the literature, which gives it some credibility.

Kai: The technique has a big advantage because you don't need to know anything about the temperature coefficient or the optical absorption or the thickness of the film.

Mira: That dependency on material properties is what makes this method so strong for characterizing transport in these layered materials.

Lev: It also lets them look at transport regimes where diffusive transport breaks down, like ballistic or hydrodynamic phonon transport, which is relevant for low-dimensional materials.

Kai: They can also use these material-specific exciton resonances to study more complex van der Waals heterostructures by modeling thermal behavior in novel combinations of materials.

Mira: So the implication here is we have a simple, sensitive way to determine the thermal diffusivity directly and explore transport regimes that are otherwise hard to access.

Lev: But they did flag one limitation, which is that while it’s good for diffusion, it doesn't immediately solve how to model complex scattering mechanisms or non-equilibrium carrier dynamics in those same films.

Kai: So this method gives us a strong starting point for understanding heat transport in these materials, but we still need to figure out the next step for modeling things that break the simple Fourier law.

The paper's improvements: Kai: So, we’re talking about how they suggest improving this technique for thermal diffusivity measurement in thin films, which is what we just covered in terms of getting that initial result for MoSe2 and WSe2.

Mira: They point out that a main strength of this whole technique is that it lets you determine the in-plane thermal diffusivity by comparing data to a simple description based on Fourier’s law of heat conduction without needing any material input parameters.

Lev: That means for real hardware, we don't need to worry about having perfect knowledge of things like the temperature coefficient or interfacial thermal conductance when we set up our measurement.

Kai: And they suggest this approach can explore transport regimes where diffusive transport breaks down, so you can look at ballistic or hydrodynamic phonon transport instead of just standard diffusion.

Mira: That’s important because it lets us see how heat moves when the material structure is really low-dimensional and not behaving like a bulk material.

Lev: If we were building error correction for something, modeling those non-diffusive regimes would be a big part of figuring out where the overhead lands in terms of transport uncertainty.

Kai: They also say this concept is generally applicable to a broad range of material systems, which is good because it could work for lots of different kinds of semiconductors and even study charge diffusion in semiconducting thin films with nanosecond or microsecond carrier lifetimes.

Mira: And they also mention using material specific exciton resonances to study more complex van der Waals heterostructures by modeling thermal behavior in novel combinations of materials.

Lev: Modeling those complex stacked structures would require a lot more sophisticated computational resources, but if the hardware could handle that, it opens up a whole new area for error correction overhead analysis.

Kai: So the paper is suggesting we use this as a tool not just to find one value, but to map out how heat moves across different types of material interfaces and structures.

Mira: It shifts the focus from just measuring one property to understanding the mechanisms that cause those properties to change between different materials.

Lev: If we can model that complex thermal behavior, it would give us better constraints on how noise affects transport in those layered systems.

Kai: So essentially, they’re showing how this pre-time-zero approach isn't just for finding a number; it’s for building a more comprehensive picture of nanoscale heat movement across different material interfaces.

Mira: And that understanding is what will let us predict thermal behavior in new devices before we even start building them.

Conclusion: Tom: So we're wrapping up our look at "A pre-time-zero spatiotemporal microscopy technique for the ultrasensitive determination of the thermal diffusivity of thin films."

Kai: To recap, this paper introduces a method that uses a pre-time-zero pump pulse and probe pulse setup to measure in-plane thermal diffusivity directly without needing material input parameters.

Mira: Right, it’s about getting that direct measurement without having to guess things like the temperature coefficient or heat capacity of the film.

Lev: It really boils down to using those residual spatial temperature profiles from previous pump pulses as a reference for diffusion tracking.

Kai: They showed this works well for MoSe2, WSe2, MoS2, and WS2 films about fifteen nanometers thick.

Mira: And the numbers they got—zero point one eight plus or minus zero point zero two centimeters squared per second for MoSe2—that’s a solid result if you have to compare it to their simulations.

Lev: For me, what’s crucial is that this method is sensitive enough that the measurement itself doesn't introduce too much noise for us to actually use it on real hardware.

Kai: Exactly, the sub-Kelvin sensitivity when probing near the exciton resonance means we can detect those tiny heat changes from the pump pulses themselves.

Mira: That level of detail is what really makes it powerful for studying low-energy phonon heat diffusion in electronic devices where things are operating at very low temperatures.

Lev: And for error correction, if we could model these transport regimes, it would give us better constraints on how noise impacts the system when you try to build something functional.

Kai: So the implication is that this technique gives us a simple and accurate way to characterize thermal transport in these materials without needing that whole library of material constants.

Mira: It’s a powerful tool for seeing how heat moves across different types of structures, especially when those structures are layered van der Waals heterostructures.

Lev: If we can model that complex thermal behavior, it would give us better constraints on how noise affects the system when you try to build something functional.

Kai: So this paper shows us a direct path to measuring thermal diffusivity using a pre-time-zero approach, which is really interesting for characterizing these layered materials.

Mira: It’s a strong foundation because it lets us bypass those material input parameters that usually make things so complicated in thermal modeling.

Lev: It’s definitely something we need to keep an eye on if we want to see how this kind of measurement integrates into larger error correction schemes later on.

Sebin Varghese, Jake Dudley Mehew, Alexander Block, David Saleta Reig, Paweł Wożniak, Roberta Farris, Zeila Zanolli, Pablo Ordejón, Üthieu J. Verstraete, Niek F. van Hulst, Klaas-Jan Tielrooij

Catalan Institute of Nanoscience and Nanotechnology (ICN2) · ICFO – Institut de Ciúncies Fotòniques · Chemistry Department and ETSF, Debye Institute for Nanomaterials Science, Utrecht University · Nanomat · Q-Mat · CESAM · European Theoretical Spectroscopy Facility · ICREA

cond-mat.mes-hall

Submitted: 2022-11-09

Updated: 2022-11-10

Journal ref: Rev. Sci. Instrum. 94, 034903 (2023)

DOI: 10.1063/5.0102855

License: http://creativecommons.org/licenses/by-nc-sa/4.0/

Importance score: 92/100

The gist: A pre-time-zero spatiotemporal microscopy technique for the ultrasensitive determination of the thermal diffusivity of thin films enables direct measurement of in-plane thermal diffusivity without…

Key concepts

Pre-time-zero approach
This method probes the thermal diffusion of excitations created by previous pump pulses by arriving at the probe pulse before the pump pulse. This allows researchers to track how heat spreads over time in thin films with high spatial accuracy, which is key for measuring diffusivity.
Transient reflectivity
This measurement captures the change in reflection caused specifically by the presence of a pump pulse. It directly represents the temperature profile ($ΔT$) within the material after excitation, providing a direct map of where heat has been deposited.
In-plane thermal diffusivity (D)
Thermal diffusivity measures how quickly heat spreads horizontally across a material. By comparing the measured spatial profile of heated spots to Fourier's law, researchers can calculate this value directly without needing complex material input parameters.

Terminology

Summary

A pre-time-zero spatiotemporal microscopy technique for the ultrasensitive determination of the thermal diffusivity of thin films enables direct measurement of in-plane thermal diffusivity without requiring material input parameters or strong heating, which is crucial for observing novel nanoscale thermal transport phenomena

Core Methodology

The technique exploits residual spatial temperature profiles obtained through transient reflectivity when probe pulses arrive before pump pulses, corresponding to an effective pump-probe time delay of 13 ns determined by the laser system's repetition rate. This pre-time-zero approach allows probing the diffusion of long-lived excitations created by previous pump pulses with nanometer accuracy, which is particularly powerful for following in-plane heat diffusion in thin films. p. 0

Where the paper says it

This corresponds to an effective pump-probe time delay of 13 ns, determined by the repetition rate of our laser system (76 MHz). This pre-time-zero technique enables probing the diffusion of long-lived excitations created by previous pump pulses with nanometer accuracy, and is particularly powerful for following in-plane heat diffusion in thin films.

The method monitors the spatial broadening of a pump-excited spot as a function of pump-probe time delay, where the probe arrives before the pump. p. 0
Where the paper says it

Most commonly, one observes broadening of an initially pump-excited spot as a function of pump-probe time delay ∆t, where the probe arrives later than the pump. The accuracy in resolving spatial broadening is determined by the signal-to-noise ratio, and can therefore be significantly beyond the diffraction limit.

Experimental Setup and Detection

The experimental setup involves an optical pump pulse exciting a small region, followed by a spatially scanned probe beam that interrogates the system at a small negative pump-probe delay time. The transient reflectivity is defined as the difference between the reflection with and without the presence of the pump pulse, which represents the temperature profile ∆T(∆x, ∆y). p. 1

Where the paper says it

We fix the position of the pump beam, and scan the probe beam in the sample plane, resolving the spatial profile of the transient reflectivity signal ∆R R (detected using a silicon photodiode) as a function of spatial pump-probe offset ∆x and/or ∆y. Here, transient reflectivity is ∆R R = Rexc−R R , where Rexc and R are the reflection of the probe with and without the presence of the pump pulse, respectively.

In a specific setup, a mode-locked laser (frep = 76 MHz) generates pulses centered at 1030 nm for pumping and a tunable signal output for probing. p. 1
Where the paper says it

S1), a mode-locked laser (frep = 76 MHz) generates pulses centered at 1030 nm. Most of the laser output power is used to pump an optical parametric oscillator (OPO) which has a tunable signal output between 1320 and 2000 nm.

The probe beam is detected using a silicon photodiode and demodulated at the modulation frequency, typically in the kHz range. p. 2
Where the paper says it

Both beams are combined with a dichroic mirror and focused onto the sample through an objective. The reflected probe beam is detected using a silicon photodiode and demodulated at the modulation frequency, typically in the kHz range.

Application to Transition Metal Dichalcogenides (TMDs)

The technique was applied to free-standing thin films of TMD materials such as MoSe2, WSe2, MoS2, and WS2 with a thickness around 15 nm. The measurements were performed in air at room temperature because vacuum led to negligibly small differences due to efficient out-of-plane heat sinking. p. 2

Where the paper says it

To facilitate efficient heat sinking outside the suspended area, we coated the substrate with 5/50 nm of Ti/Au. The measurements are performed in air (and at room temperature), as going to vacuum led to negligibly small differences (see Supplementary Materials, Fig.

The technique is sensitive to sub-Kelvin temperature changes when probing with a wavelength close to the exciton resonance, where reflection is particularly sensitive to lattice temperature. p. 1
Where the paper says it

We use suspended films, such that phonon heat can accumulate due to the absence of a heat-sinking substrate. Furthermore, the temperature sensitivity reaches the sub-Kelvin level, when probing with a wavelength close to the exciton resonance, where the reflection is particularly sensitive to lattice temperature.

Quantitative Results and Validation

The thermal diffusivity (D) was obtained by comparing the experimental spatial profile to a simple model based on Fourier’s law of heat conduction, which does not require any material input parameters. For MoSe2, the extracted thermal diffusivity was found to be 0. p. 5

Where the paper says it

Figure 5A-D shows the normalized ∆t = 0 and ∆t < 0 spatial profiles for MoSe2 (A), WSe2 (B), MoS2 (C), and WS2 (D), measured at a pump fluence of ∼0. The extracted diffusivity is the one that minimizes the squared residuals between the experimental pre-time-zero profile and the simulated profile.

18 ± 0.02 cm2/s. The obtained results were in agreement with ab initio simulations based on density functional theory (DFT) and with experimental values in the literature. p. 1
Where the paper says it

We obtain the thermal diffusivity directly by comparing the experimental spatial profile to a simple model based on Fourier’s law of heat conduction, which does not require any material input parameters. The obtained experimental results are in agreement with our ab initio simulations based on density functional theory (DFT) and with experimental values in the literature.

The technique is sensitive to reflection changes caused by heating by less than a Kelvin. p. 3
Where the paper says it

[23] and MoSe2 from Ref. Importantly, these results show that the technique is sensitive to reflection changes caused by heating by less than a Kelvin.

Advantages and Future Directions

A main strength of this technique is that it enables the determination of the in-plane thermal diffusivity by comparing data to a simple description based on Fourier’s heat law. It does not require knowledge of any material parameters, such as the temperature coefficient, optical absorption, thickness, interfacial thermal conductance, heat capacity and/or properties related to transducer layers. p. 8

Where the paper says it

One of the main strengths of the technique is that it enables the determination of the in-plane thermal diffusivity of a thin film by comparing the data to a simple description based on Fourier’s heat law. Unlike most of the existing techniques, our technique does not require knowledge of any material parameters, such as the temperature coefficient, optical absorption, thickness, interfacial thermal conductance, heat capacity and/or properties related to transducer layers.

Furthermore, the technique can explore transport regimes where diffusive transport breaks down and ballistic or hydrodynamic phonon transport occurs. p. 8
Where the paper says it

Continuing with thermal transport as the main example, we suggest combining our technique that provides the diffusivity with a complementary study that provides the thermal conductivity, in order to obtain the heat capacity in an all-optical fashion. Our technique will also likely make it possible to access transport regimes where diffusive transport breaks down, and ballistic or hydrodynamic phonon transport occurs.

The concept is generally applicable to a broad range of material systems, and it can observe charge diffusion in semiconducting thin films with nanosecond or microsecond carrier lifetimes. p. 8
Where the paper says it

For example, the pre-time zero profile for materials with very long-lived photoexcited charges, such as halide perovskites, will contain a significant contribution that corresponds to electronic diffusion, rather than thermal diffusion. This, however, means that this technique makes it possible to observe charge diffusion in semiconducting thin films with nanosecond or microsecond carrier lifetimes, which is particularly interesting for

Conclusions

In this work, we have introduced a technique for measuring diffusion processes of long-lived excitations by exploiting the pre-time-zero spatial profile. We have determined the thermal diffusivities of suspended MoSe2, WSe2, MoS2, and WS2 thin films. p. 9

Where the paper says it

In particular, we have shown that this technique can be used to obtain the in-plane thermal diffusivity of thin films. We have determined the thermal diffusivities of suspended MoSe2, WSe2, MoS2, and WS2 thin films.

Our technique provides a simple, sensitive, and accurate way of determining the thermal diffusivity. p. 9
Where the paper says it

We have determined the thermal diffusivities of suspended MoSe2, WSe2, MoS2, and WS2 thin films. Our technique provides a simple, sensitive, and accurate way of determining the thermal diffusivity, and will enable a deeper understanding of the thermal properties of nanoscale materials.

The technique of pre-time-zero spatiotemporal scanning constitutes a powerful tool for studying a multitude of diffusion processes in a large variety of systems. p. 9
Where the paper says it

Our technique provides a simple, sensitive, and accurate way of determining the thermal diffusivity, and will enable a deeper understanding of the thermal properties of nanoscale materials. Furthermore, the technique of pre-time-zero spatiotemporal scanning constitutes a powerful tool for studying a multitude of diffusion processes in a large variety of systems.

Acknowledgements

ICN2 was supported by the Severo Ochoa program from Spanish MINECO Grant No. SEV-2017-0706. p. 9

Where the paper says it

ACKNOWLEDGEMENTS ICN2 was supported by the Severo Ochoa program from Spanish MINECO Grant No. SEV-2017-0706.

K.J.T. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. p. 9
Where the paper says it

acknowledge the support of the Spanish Ministry of Economy through FPI-SO2018 and FPI-SO2019, respectively. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No.

804349 (ERC StG CUHL). p. 9
Where the paper says it

acknowledges funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. 804349 (ERC StG CUHL), RYC fellowship No.

ICFO was supported by the Severo Ochoa program for Centers of Excellence in R&D (CEX2019-000910-S). p. 9
Where the paper says it

RYC-2017-22330 and IAE project PID2019-111673GB-I00. ICFO was supported by the Severo Ochoa program for Centers of Excellence in R&D (CEX2019-000910-S), Fundació Privada Cellex, Fundació Privada Mir-Puig and the Generalitat de Catalunya through the CERCA program.

M.J.V. acknowledges support from Fédération Wallonie Bruxelles and ULiège (ARC project DREAMS G. p. 9
Where the paper says it

acknowledges funding by the European Commission (ERC AdG 670949-LightNet), the Spanish Plan Nacional (PGC2018-096875-BI00) and the Catalan AGAUR (2017SGR1369). acknowledges support from Fédération Wallonie Bruxelles and ULiège (ARC project DREAMS G.

A. 21/25-11). PRACE computing time on MareNostrum4 at Barcelona Supercomputing Center (OptoSpin id. p. 9
Where the paper says it

006) is part of the Gravitation program financed by the Dutch Ministry of Education, Culture and Science (OCW). We acknowledge PRACE computing time on MareNostrum4 at Barcelona Supercomputing Center (OptoSpin id.

2020225411) is acknowledged. p. 9
Where the paper says it

We acknowledge PRACE computing time on MareNostrum4 at Barcelona Supercomputing Center (OptoSpin id. 2020225411).

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Thermal diffusivity determination for thin films: The improved system can directly determine thermal diffusivities of layered materials like MoSe2, WSe2, MoS2, and WS2 without needing material input parameters or strong heating. This allows AI systems to accurately model nanoscale thermal transport in semiconductor and two-dimensional material devices.

  2. Sub-Kelvin temperature sensitivity: The system achieves temperature sensitivity reaching the sub-Kelvin level when probing with a wavelength close to the exciton resonance, enabling AI to detect small amounts of heat generated by pump pulses below one Kelvin. This is crucial for studying low-energy phonon heat diffusion in electronic and optoelectronic devices.

  3. Non-invasive thermal characterization: The technique offers an advantage of being a non-invasive, contact-free approach compared to existing techniques that require strong heating or knowledge of many material parameters. AI can utilize this capability to monitor thermal transport in functional devices without altering their operational conditions.

  4. Exploration of non-diffusive transport regimes: The technique will make it possible to access transport regimes where diffusive transport breaks down, such as ballistic or hydrodynamic phonon transport, which are relevant for understanding low-dimensional materials. AI systems can be trained on these profiles to distinguish between different heat transport mechanisms in nanoscale structures.

  5. Study of complex structures: The technique enables the study of more complex van der Waals heterostructures by using material specific exciton resonances, allowing AI to model and predict thermal behavior in novel layered combinations of materials.

Abstract

Diffusion is one of the most ubiquitous transport phenomena in nature. Experimentally, it can be tracked by following point spreading in space and time. Here, we introduce a spatiotemporal pump-probe microscopy technique that exploits the residual spatial temperature profile obtained through the transient reflectivity when probe pulses arrive before pump pulses. This corresponds to an effective pump-probe time delay of 13 ns, determined by the repetition rate of our laser system (76 MHz). This pre-time-zero technique enables probing the diffusion of long-lived excitations created by previous pump pulses with nanometer accuracy, and is particularly powerful for following in-plane heat diffusion in thin films. In contrast to existing techniques for quantifying thermal transport it does not require any material input parameters or strong heating. We demonstrate the direct determination of the thermal diffusivities of the layered materials MoSe 2 (0.18 cm squared /s), WSe 2 (0.20 cm squared /s), MoS 2 (0.35 cm squared /s), and WS 2 (0.59 cm squared /s). This technique paves the way for observing novel nanoscale thermal transport phenomena and tracking diffusion of a broad range of species.

Sources

Related papers