Interference effects in one-dimensional moir'e crystals

arXiv:2108.00472 · cond-mat.mes-hall · Submitted 2021-08-01 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Interference effects in one-dimensional moir'e crystals".

Mira: Here's the gist of the paper. Interference effects in finite sections of one-dimensional moiré crystals are investigated using a Landauer-Büttiker formalism within the tight-binding approximation The wave function interference is visible at the mesoscale: in the strong coupling regime, as a periodic modulation of quantum conductance and emergent localized states; in the localized-insulating regime, as a suppression of interlayer transport, and oscillations of the density of states These results could be exploited to design quantum electronic devices Material Context Quantum materials are a class of materials that exhibit quantum effects at the macroscopic scale, offering the opportunity to realize paradigm-shifting quantum electronics Twisted bilayer graphene (tBLG) is a prime example of a tunable quantum material where the twist angle and resulting bi-dimensional moiré pattern control emerging material properties One-dimensional moiré systems are realized in double-wall carbon nanotubes (DWNT) and are determined by two parameters: the angle between the inner and outer tubes’ chiral vectors (like tBLG) and the difference between their radii These degrees of freedom control the effective interlayer interaction and the resulting electronic states Regime Analysis The study investigates three regimes determined by the relative alignment of the chiral vectors of the tubes, identified as localized insulating, strong and weak coupling 1.

Kai: Localized Insulating Regime: This regime is characterized by a suppression of interlayer transport and oscillations of the density of states 2.

Mira: Strong Coupling Regime: In this regime, strong coupling leads to semiconducting tube combinations producing a finite density of states in their gap, and metallic tubes can become semiconducting 3.

Kai: Weak Coupling Regime: In this regime, interlayer transmission for chiral or incommensurate tDWNTs is suppressed Modeling and Prediction The authors devise a predictive model for the transmission based on wave interference in one dimension)& The overlap length modulates the tDWNT electronic properties, showing oscillations as a function of overlap length, giving rise to regions with zero and maximal transmission)& Dips in the transmission spectra of armchair@armchair tDWNTs emerge due to back-scattering by localized states in the overlap region The simple model derived is given by T(E, L) = sin(L/δkF/2) · sin(L(kF − E)/vF)2 (Eq.

Paper summary: Kai: So, to summarize this paper, "Interference effects in one-dimensional moir´e crystals," the main thesis is that wave function interference is visible at the mesoscale when you examine finite sections of these one-dimensional moiré crystals.

Mira: The paper investigates interlayer transport in double-wall carbon nanotubes using a Landauer-Büttiker formalism within the tight-binding approximation to explain how this happens.

Kai: What they claim are specific signatures: in the strong coupling regime, interference shows up as a periodic modulation of quantum conductance and emergent localized states.

Mira: And in the localized-insulating regime, they see a suppression of interlayer transport along with oscillations in the density of states.

Lev: So why does this matter to us right now? It suggests that these effects aren't just for infinite systems; they happen even in finite segments, which is crucial for real applications involving coaxial nanotubes.

Kai: They are designing a predictive model based on this wave interference to help engineers understand the behavior of these materials when we try to use them in quantum electronic devices.

Mira: The paper sets up three regimes—localized insulating, strong coupling, and weak coupling—based on the relative alignment of the tube chiral vectors.

Lev: From an error correction standpoint, knowing these interference patterns could tell us exactly where localized states are forming in the overlap region, which helps us calculate the necessary overhead for running such systems on real hardware.

Kai: It's about using this knowledge to design things that utilize these quantum effects we see at the mesoscale.

Conclusion: Kai: Thinking about "Interference effects in one-dimensional moir´e crystals" and the authors, Wittemeier, Verstraete, Ordej´on, and Zanolli, the implication is that we can move from just studying infinite ideal cases to understanding the real limitations of how these materials transport electrons.

Mira: What they show is that by tuning a simple overlap length in a finite system like a tDWNT, you get precise control over whether you have zero or maximal transmission.

Lev: So for someone focused on hardware, this means we can engineer the geometry of the nanotube overlap to intentionally avoid those dips in transmission caused by back-scattering from localized states.

Kai: It’s about using this interference picture to build switches where we control when current flows by manipulating the physical length of the connection between two layers.

Mira: The authors are showing that chiral tDWNTs are particularly good because they maintain that oscillating behavior you see in strongly coupled systems while avoiding back-scattering due to rotational symmetry.

Lev: So, this paper gives us a tangible framework for designing these structures for quantum applications, telling us exactly what kind of physical geometry we need to target when building the device.

Nils Wittemeier, Matthieu J. Verstraete, Pablo Ordejón, Zeila Zanolli

Catalan Institute of Nanoscience and Nanotechnology - ICN2 (CSIC, BIST) · NanoMat/Q-Mat/CESAM and ETSF · Chemistry Department and Debye Institute for Nanomaterials Science, Condensed Matter and Interfaces, Utrecht University

cond-mat.mes-hall

Submitted: 2021-08-01

Updated: 2021-08-01

Journal ref: Carbon 416 186 (2022)

DOI: 10.1016/j.carbon.2021.10.028

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 74/100

The gist: Interference effects in finite sections of one-dimensional moir´e crystals are investigated using a Landauer-Büttiker formalism within the tight-binding approximation We explain interlayer…

Key concepts

Moiré Crystals
These are one-dimensional structures formed by the twist between two layers, like double-wall carbon nanotubes. The twist creates a periodic pattern (moiré) that significantly alters the electronic properties of the material, allowing for tunable quantum effects.
Landauer-Büttiker Formalism
This is a theoretical framework used to calculate quantum conductance by considering how electrons transmit through a system. It helps model the flow of charge between two electrodes in a nanoscale device, which is crucial for understanding transport in these moiré systems.
Tight-Binding Approximation
A simplified mathematical model used to describe the electronic structure and interactions within a material. In this study, it is used to map out how electrons hop between atoms and layers, allowing researchers to predict the electronic behavior based on the geometry of the moiré pattern.

Terminology

Summary

Interference effects in finite sections of one-dimensional moir´e crystals are investigated using a Landauer-Büttiker formalism within the tight-binding approximation We explain interlayer transport in double-wall carbon nanotubes and design a predictive model Wave function interference is visible at the mesoscale: in the strong coupling regime, as a periodic modulation of quantum conductance and emergent localized states; in the localized-insulating regime, as a suppression of interlayer transport, and oscillations of the density of states These results could be exploited to design quantum electronic devices. p. 0

Where the paper says it

We explain interlayer transport in double-wall carbon nanotubes and design a predictive model. Wave function interference is visible at the mesoscale: in the strong coupling regime, as a periodic modulation of quantum conductance and emergent localized states; in the localized-insulating regime, as a suppression of interlayer transport, and oscillations of the density of states.

System Description and Regimes

The study focuses on investigating interlayer transmission between two concentric nanotubes that overlap in a finite region and extend infinitely in opposite directions, referred to as telescopic double wall nanotubes (tDWNT) The physics emerging in 2D moir´e crystals has been studied extensively, but the understanding of its one-dimensional counterpart is limited to the ideal infinite nanotube case and commensurate, telescopic nanotubes. The regimes identified for the idealized infinite DWNT are localized insulating, strong and weak coupling, determined by the relative alignment of chiral vectors. p. 1

Where the paper says it

5 devised a continuum model for the idealized infinite DWNT. They identify three regimes with unique electronic properties (localized insulating, strong and weak coupling) determined by the relative alignment of the chiral vectors of the tubes.

Strong Coupling Regime Analysis

In the strong coupling regime, DWNTs are characterized when the constituent tubes’ chiral vectors are nearly parallel and their difference points along the armchair direction. For DWNTs consisting of armchair tubes (n,n)@(m,m), a maximum of 1 G0 conductance is computed in the set-up of Fig. p. 8

Where the paper says it

The band structure can be computed by artificially imposing periodicity using a commensurate supercell consisting of 4 and 3 repetitions of (18,15) and (23,20), respectively, and straining both tubes by ±1% (SI Fig ? For the telescopic setup, the maximum conductance (2 G0) can be attained due to the strong hybridization of both linear bands between the tubes, resulting in two simultaneously available conduction channels.

1a. The transmission function presents a series of dips where conduction is blocked. p. 3
Where the paper says it

The conductance of the DWNT with finite overlap region shows a maximum of 1 G0 computed in the set-up of Fig. The transmission function presents a series of dips where conduction is blocked (Fig.

These dips correspond to localized eigenstates in the overlap region. p. 5
Where the paper says it

Depending on the overlap length this transmission occurs with almost no back-scattering (L ≈ 50 A, 150 A) or is completely blocked ( L ≈ 100 A). In order to un- derstand the origin of the transmission dips, we calculate the eigenstates of finite segments of the open system including additional CNT-rings on each side of the scattering region.

Predictive Modeling and Oscillations

A predictive model based on wave interference in one dimension was devised to reproduce the tunability and position of transmission dips. The simple model, using sine functions, reproduces the energy-independent global oscillation of the transmission with overlap length. p. 7

Where the paper says it

2 shows the impressive agreement between the transmission calculated with this simple model and the tight-binding results. The model reproduces the energy-independent global 8

This model predicts a spatial period of 96 A for an incommensurate and chiral, strongly coupled metallic DWNT. p. 8
Where the paper says it

However, the simple approach is qualitatively correct and can intuitively be connected to the image of 1D-waves. We now consider an example of an incommensurate and chiral, strongly coupled, metallic DWNT: (18,15)@(23,20).

Localized Insulating Regime Findings

In the localized insulating regime, the interlayer conductance is very small irrespective of the overlap length, which agrees with previous references. Interference effects are observable as peaks in the (27,3)@(35,3) DOS in Fig. p. 0

Where the paper says it

Interference effects in one-dimensional moir´e crystals. Nils Wittemeier,† Matthieu J.

5. The emergence of flat bands is attributed to the localization of electrons in an effective potential with long spatial period. p. 6
Where the paper says it

459 A) and lower density above (1/2. The model reproduces both trends in LB-transmission: the energy independent modulation of the transmission with overlap length on long spatial period, and the secondary modulation of the transmission dependent on energy and overlap.

Weak Coupling Regime Behavior

In the weak coupling regime, interlayer transmission for chiral or incommensurate tDWNTs is suppressed. In contrast, zig-zag@zig-zag tDWNTs exhibit significant interlayer transmission near the Fermi-level due to rotational symmetry. p. 2

Where the paper says it

We explain that dips in the transmission spectra of armchair@armchair tDWNTs emerge due to back-scattering by localized states in the overlap region. These transmission dips are absent in strongly coupled chiral tDWNT due the lack of rotational symmetries.

Conclusion

The two main coupling regimes predicted for double wall carbon nanotubes are present already in finite DWNT segments. Strong coupling is characterized by transmission blocked by localized states and oscillation with overlap length. p. 5

Where the paper says it

At intermediate overlap lengths, the interlayer conductance is reduced, the dips are broader, and transmission is blocked completely for L ≈ 100 A and L ≈ 200 A, following a periodic behavior. This reduction of the maximum conduction as well as the oscillation with overlap length was predicted in Ref.

p. 5
Where the paper says it

At intermediate overlap lengths, the interlayer conductance is reduced, the dips are broader, and transmission is blocked completely for L ≈ 100 A and L ≈ 200 A, following a periodic behavior. This reduction of the maximum conduction as well as the oscillation with overlap length was predicted in Ref.

The rotational symmetry of the tDWNT can reduce the maximal transmission, blocking transmission through one of the electrode channels completely. p. 5
Where the paper says it

The asymmetric setup limits the conductance from 4 G0 to the minimum of the electrode conductances (2 G0). The reduction of the maximum conductance to 1 G0 is traced back to the three-fold rotational symmetry of the DWNT section, which results in the cancellation of one of the two available transport channels in Ref.

p. 5
Where the paper says it

The asymmetric setup limits the conductance from 4 G0 to the minimum of the electrode conductances (2 G0). The reduction of the maximum conductance to 1 G0 is traced back to the three-fold rotational symmetry of the DWNT section, which results in the cancellation of one of the two available transport channels in Ref.

Chiral tDWNTs are highlighted as the most promising candidates for nano-electronic switches. p. 2
Where the paper says it

The overlap length modulates the tDWNT electronic properties. We demonstrate that this tunability extends to strongly coupled, chiral and incommensurate tDWNts.

p. 2
Where the paper says it

The overlap length modulates the tDWNT electronic properties. We demonstrate that this tunability extends to strongly coupled, chiral and incommensurate tDWNts.

The absence of rotational symmetries in chiral nanotubes prevents back-scattering at localized states. p. 2
Where the paper says it

We explain that dips in the transmission spectra of armchair@armchair tDWNTs emerge due to back-scattering by localized states in the overlap region. These transmission dips are absent in strongly coupled chiral tDWNT due the lack of rotational symmetries.

p. 2
Where the paper says it

We explain that dips in the transmission spectra of armchair@armchair tDWNTs emerge due to back-scattering by localized states in the overlap region. These transmission dips are absent in strongly coupled chiral tDWNT due the lack of rotational symmetries.

The localized insulating regime shows strong oscillations in the DOS due to flat bands. p. 1
Where the paper says it

They identify three regimes with unique electronic properties (localized insulating, strong and weak coupling) determined by the relative alignment of the chiral vectors of the tubes. Dispersionless flat bands appear in the localized insulating regime.

p. 1
Where the paper says it

They identify three regimes with unique electronic properties (localized insulating, strong and weak coupling) determined by the relative alignment of the chiral vectors of the tubes. Dispersionless flat bands appear in the localized insulating regime.

Methods

The tight-binding model uses a non-orthogonal tight-binding (TB) model with one orbital per carbon site. The model extends to include curvature effects, using ppσ interactions in addition to the ppπ interactions, and interlayer hopping up to a cut-off distance of 5 A. p. 0

Where the paper says it

nl Abstract Interference effects in finite sections of one-dimensional moir´e crystals are investigated using a Landauer-B¨uttiker formalism within the tight-binding approximation. We explain interlayer transport in double-wall carbon nanotubes and design a predictive model.

p. 0
Where the paper says it

nl Abstract Interference effects in finite sections of one-dimensional moir´e crystals are investigated using a Landauer-B¨uttiker formalism within the tight-binding approximation. We explain interlayer transport in double-wall carbon nanotubes and design a predictive model.

The TB parameters were fit to electronic band structures of single and double-wall carbon nanotubes obtained from first-principles density functional theory. p. 1
Where the paper says it

3,4 One-dimensional moir´e systems are realized in double-wall carbon nanotubes (DWNT) and are determined by two parameters: the angle between the inner and outer tubes’ chiral vectors (like tBLG) and the difference between their radii. These degrees of freedom control the effective interlayer interaction and the resulting electronic states.

p. 1
Where the paper says it

3,4 One-dimensional moir´e systems are realized in double-wall carbon nanotubes (DWNT) and are determined by two parameters: the angle between the inner and outer tubes’ chiral vectors (like tBLG) and the difference between their radii. These degrees of freedom control the effective interlayer interaction and the resulting electronic states.

Transmission and density of states (DOS) are extracted using the Landauer-Büttiker formalism (LB) formalism. p. 0
Where the paper says it

zanolli@uu. nl Abstract Interference effects in finite sections of one-dimensional moir´e crystals are investigated using a Landauer-B¨uttiker formalism within the tight-binding approximation.

First principles calculations were done with the siesta implementation of the density functional theory (DFT) method.

First Principles Calculations

First principles calculations were performed using the local density approximation (LDA) exchange-correlation functional in conjunction with optimized norm-conserving Vanderbilt (ONCV) scalar-relativistic pseudopotentials. The Brillouin zone was sampled using a Γ-centered, onedimensional grid with 78 k-points for the pristine armchair nanotubes. p. 3

Where the paper says it

The magnitude of T depends on how electrode states couple through the overlap region, probing sensitively the interlayer interaction. Strong coupling regime DWNTs are in the strong coupling regime when the constituting tubes’ chiral vectors are nearly parallel and their difference points along the armchair direction.

p. 3
Where the paper says it

The magnitude of T depends on how electrode states couple through the overlap region, probing sensitively the interlayer interaction. Strong coupling regime DWNTs are in the strong coupling regime when the constituting tubes’ chiral vectors are nearly parallel and their difference points along the armchair direction.

Acknowledgments

The authors acknowledge enriching discussions on the tight-binding parametrization with L. Henrard and P. Lambin. This work was supported by Spanish MINECO (the Severo Ochoa Centers of Excellence Program under Grant No. p. 2

Where the paper says it

Answering these basic questions is essential for the use of coaxial nanotubes in applications involving electronic transport. 16 In this work, we address these questions by studying interlayer transmission between two concentric nanotubes that overlap in a finite region and extend infinitely in opposite directions (telescopic double wall nanotubes, tDWNT, Fig 1a).

SEV- 2017-0706), Spanish MICIU, AEI and EU FEDER (Grants No. PGC2018-096955-B-C4), Generalitat de Catalunya (Grant No. 2017SGR1506 and the CERCA Programme), and the European Union MaX Center of Excellence (EU-H2020 Grant No. 824143). ZZ acknowledges financial support by the Ramon y Cajal program RYC-2016-19344 (MINECO/AEI/FSE, UE) and the Netherlands Sector Plan program 2019-2023. MJV acknowledges funding by the Belgian FNRS (PDR G.A. T.1077.15-1/7 and a sabbatical “OUT” grant at ICN2), and computational resources from the Consortium des Equipements de Calcul Intensif (CECI, FRS-FNRS G. p. 0
Where the paper says it

Nils Wittemeier,† Matthieu J. Verstraete,‡,† Pablo Ordej´on,† and Zeila Zanolli∗,¶,† †Catalan Institute of Nanoscience and Nanotechnology - ICN2 (CSIC, BIST), Campus UAB, 08193 Bellaterra, Spain ‡NanoMat/Q-Mat/CESAM and ETSF, Universit´e de Li`ege (B5) and ETSF, B-4000 Li`ege, Belgium ¶Chemistry Department and, Debye Institute for Nanomaterials Science, Condensed Matter and Interfaces, Utrecht University and ETSF, PO Box 80.

A. 2.5020.11) and Zenobe/CENAERO funded by the Walloon Region under G. p. 1
Where the paper says it

Experimental conditions impose a finite tube length and electrical contacts on the outer tube only. As the overlap region between inner and outer tubes is finite, strong confinement effects can arise, as in SWNTs with finite length.

A. 1117545. The authors acknowledge use of the open-source project sisl used to generate atomic structures and as basis of implementation for our tight-binding model. p. 0
Where the paper says it

nl Abstract Interference effects in finite sections of one-dimensional moir´e crystals are investigated using a Landauer-B¨uttiker formalism within the tight-binding approximation. We explain interlayer transport in double-wall carbon nanotubes and design a predictive model.

References

The references listed are 1 through 33. The references include works on quantum materials, carbon nanotube transport, and specific theoretical methods used in the study. p. 0

Where the paper says it

We explain interlayer transport in double-wall carbon nanotubes and design a predictive model. Wave function interference is visible at the mesoscale: in the strong coupling regime, as a periodic modulation of quantum conductance and emergent localized states; in the localized-insulating regime, as a suppression of interlayer transport, and oscillations of the density of states.

p. 0
Where the paper says it

We explain interlayer transport in double-wall carbon nanotubes and design a predictive model. Wave function interference is visible at the mesoscale: in the strong coupling regime, as a periodic modulation of quantum conductance and emergent localized states; in the localized-insulating regime, as a suppression of interlayer transport, and oscillations of the density of states.

The paper cites literature concerning magic-angle graphene superlattices and electronic transport in nanotubes. p. 1
Where the paper says it

Twisted bilayer graphene (tBLG) is a prime example of a tunable quantum material. The twist angle, and the resulting bi-dimensional moir´e pattern, controls the emerging material properties: for specific magic angles, strong interlayer coupling and flat bands arise, resulting in superconductivity and strongly correlated phases.

The references also cover the tight-binding description of graphene and related materials. p. 1
Where the paper says it

The controlled generation and manipulation of quantum states by electrical, magnetic, or optical means is a key challenge in bringing quantum materials to applications. Twisted bilayer graphene (tBLG) is a prime example of a tunable quantum material.

The citations support the theoretical framework and experimental context of the investigation. p. 1
Where the paper says it

The electronic structure of DWNT with weak coupling is given by the superposition of the constituent nanotubes, whereas it is heavily perturbed in the strong coupling regime: semiconducting tube combinations can produce a finite density of states in their gap, and metallic tubes can become semiconducting. Experimental evidence of DWNTs with strong interlayer coupling has been recently reported, 7 but the relation between the measurements and the idealized infinite DWNT model by Koshino is not trivial.

p. 1
Where the paper says it

The electronic structure of DWNT with weak coupling is given by the superposition of the constituent nanotubes, whereas it is heavily perturbed in the strong coupling regime: semiconducting tube combinations can produce a finite density of states in their gap, and metallic tubes can become semiconducting. Experimental evidence of DWNTs with strong interlayer coupling has been recently reported, 7 but the relation between the measurements and the idealized infinite DWNT model by Koshino is not trivial.

The references detail specific calculations and simulations performed for DWNTs. p. 3
Where the paper says it

Results and Discussion Conductance simulations are performed for two concentric nanotubes that overlap over a finite length L, connected to semi-infinite SWNT leads (Fig. Electron transmission is only allowed at energies where conduction channels are available in both electrodes (only metallic nanotube contacts allow transmission close to the Fermi level).

p. 3
Where the paper says it

Results and Discussion Conductance simulations are performed for two concentric nanotubes that overlap over a finite length L, connected to semi-infinite SWNT leads (Fig. Electron transmission is only allowed at energies where conduction channels are available in both electrodes (only metallic nanotube contacts allow transmission close to the Fermi level).

p. 3
Where the paper says it

Results and Discussion Conductance simulations are performed for two concentric nanotubes that overlap over a finite length L, connected to semi-infinite SWNT leads (Fig. Electron transmission is only allowed at energies where conduction channels are available in both electrodes (only metallic nanotube contacts allow transmission close to the Fermi level).

The list includes foundational works on electronic transport in mesoscopic systems. p. 1
Where the paper says it

3,4 One-dimensional moir´e systems are realized in double-wall carbon nanotubes (DWNT) and are determined by two parameters: the angle between the inner and outer tubes’ chiral vectors (like tBLG) and the difference between their radii. These degrees of freedom control the effective interlayer interaction and the resulting electronic states.

The citations provide context for the physics of moiré crystals and correlated states. p. 2
Where the paper says it

In the localized insulating regime we show that the interlayer conductance is very small irrespective of the overlap length, in agreement with Ref. We recover the Koshino limit for sufficiently long (but finite) overlap lengths, and provide benchmarks for experimental realizations of 1D moir´es and correlated states in DWNT.

p. 2
Where the paper says it

In the localized insulating regime we show that the interlayer conductance is very small irrespective of the overlap length, in agreement with Ref. We recover the Koshino limit for sufficiently long (but finite) overlap lengths, and provide benchmarks for experimental realizations of 1D moir´es and correlated states in DWNT.

Table 1

Table 1 summarizes oscillation periods in DOS of a (27,3)@(36,3) tDWNT in the energy ranges −0.35 eV to −0.05 eV and 0.1 eV to 0.35 eV for three different overlap length. p. 2

Where the paper says it

16 In this work, we address these questions by studying interlayer transmission between two concentric nanotubes that overlap in a finite region and extend infinitely in opposite directions (telescopic double wall nanotubes, tDWNT, Fig 1a). We predict the effects of the length of the overlap region in the different regimes, going beyond previous works that only consider commensurate tDWNT.

Table 2

Table 2 summarizes optimized tight-binding parameters. The table details the optimized intra-layer and inter-layer hopping parameters used in the model. p. 2

Where the paper says it

We predict the effects of the length of the overlap region in the different regimes, going beyond previous works that only consider commensurate tDWNT. The inter-layer transmission in tDWNTs composed of two armchair nanotubes (armchair@armchair) oscillates as a function of the overlap length, giving rise to regions with zero and maximal transmission.

Figure 1

Figure 1 shows a) Transport set-up, b) Projected TB band structure of an ideal (10,10)@(15,15) DWNT, and c) TB electron transmission from a semi-infinite (10,10) into a semi-infinite (15,15) SWNT through an overlap region with length 34.08 A.

Figure 2

Figure 2 shows TB electron transmission from a (10,10) SWNT into a (15,15) SWNT through a finite overlap region at different overlap lengths calculated with a) LB+TB formalism and b) our model.

Figure 3

Figure 3 shows schematic of standing waves in the overlap region between two semi-infinite nanotubes.

Figure 4

Figure 4 shows strong coupling (M@M): TB electron transmission from (18,15) into (23,20) with different overlap lengths L.

Figure 5

Figure 5 shows localized insulating DWNT (M@SC): density of states in the scattering region and electron transmission for different overlap lengths.

Figure 6

Figure 6 shows localized quasi-insulating (M@M): density of states in the scattering region and electron transmission for different overlap lengths.

The paper demonstrates that the two main coupling regimes predicted for double wall carbon nanotubes are present already in finite DWNT segments. Strong coupling is characterized by transmission blocked by localized states and oscillation with overlap length. The rotational symmetry of the tDWNT can reduce the maximal transmission, blocking transmission through one of the electrode channels completely. Chiral tDWNTs are highlighted as the most promising candidates for nano-electronic switches. The absence of rotational symmetries in chiral nanotubes prevents back-scattering at localized states. The localized insulating regime shows strong oscillations in the DOS due to flat bands.

The tight-binding model uses a non-orthogonal tight-binding (TB) model with one orbital per carbon site. The model extends to include curvature effects, using ppσ interactions in addition to the ppπ interactions, and interlayer hopping up to a cut-off distance of 5 A. The TB parameters were fit to electronic band structures of single and double-wall carbon nanotubes obtained from first-principles density functional theory. The transmission and density of states (DOS) are extracted using the Landauer-Büttiker formalism (LB) formalism. p. 0

Where the paper says it

zanolli@uu. nl Abstract Interference effects in finite sections of one-dimensional moir´e crystals are investigated using a Landauer-B¨uttiker formalism within the tight-binding approximation.

First principles calculations were done with the siesta implementation of the density functional theory (DFT) method. The TB parameters were optimized to reproduce the ab initio bands of two DWNTs. p. 1
Where the paper says it

The twist angle, and the resulting bi-dimensional moir´e pattern, controls the emerging material properties: for specific magic angles, strong interlayer coupling and flat bands arise, resulting in superconductivity and strongly correlated phases. 3,4 One-dimensional moir´e systems are realized in double-wall carbon nanotubes (DWNT) and are determined by two parameters: the angle between the inner and outer tubes’ chiral vectors (like tBLG) and the difference between their radii.

The transmission and DOS are extracted at zero voltage between the two electrodes. p. 2
Where the paper says it

We predict the effects of the length of the overlap region in the different regimes, going beyond previous works that only consider commensurate tDWNT. The inter-layer transmission in tDWNTs composed of two armchair nanotubes (armchair@armchair) oscillates as a function of the overlap length, giving rise to regions with zero and maximal transmission.

First principles calculations were done with the siesta implementation of the density functional theory (DFT) method. The Brillouin zone was sampled using a Γ-centered, onedimensional grid with 78 k-points for the pristine armchair nanotubes.

The references listed are 1 through 33. The references include works on quantum materials, carbon nanotube transport, and specific theoretical methods used in the study. The references include foundational works on electronic transport in mesoscopic systems. p. 1

Where the paper says it

3,4 One-dimensional moir´e systems are realized in double-wall carbon nanotubes (DWNT) and are determined by two parameters: the angle between the inner and outer tubes’ chiral vectors (like tBLG) and the difference between their radii. These degrees of freedom control the effective interlayer interaction and the resulting electronic states.

The citations support the theoretical framework and experimental context of the investigation. The references detail specific calculations and simulations performed for DWNTs. The list includes foundational works on electronic transport in carbon nanotubes. p. 0
Where the paper says it

nl Abstract Interference effects in finite sections of one-dimensional moir´e crystals are investigated using a Landauer-B¨uttiker formalism within the tight-binding approximation. We explain interlayer transport in double-wall carbon nanotubes and design a predictive model.

p. 0
Where the paper says it

nl Abstract Interference effects in finite sections of one-dimensional moir´e crystals are investigated using a Landauer-B¨uttiker formalism within the tight-binding approximation. We explain interlayer transport in double-wall carbon nanotubes and design a predictive model.

The citations provide context for the physics of moiré crystals and correlated states. The references detail specific calculations and simulations performed for DWNTs. The list includes foundational works on electronic transport in carbon nanotubes.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI system can predict quantum conductance oscillations in finite sections of one-dimensional moire crystals by using a predictive model based on wave interference in one dimension. This model reproduces the oscillation of the transmission with the overlap length and predicts periodicity from the shift of the Fermi vector (delta kF) for any nanotube combination.

  2. Improved AI system can design quantum electronic devices by identifying regimes where Wave function interference is visible at the mesoscale, specifically distinguishing between localized-insulating regimes, which involve a suppression of interlayer transport, and oscillations of the density of states.

  3. Improved AI system can accurately simulate electron transmission through telescopic double wall nanotubes (tDWNTs) by modeling the superposition of wave vector components to show how transmission is modulated between the two tubes and when it is completely blocked or passes without back-scattering based on overlap length.

Abstract

Interference effects in finite sections of one-dimensional moiré crystals are investigated using a Landauer-Büttiker formalism within the tight-binding approximation. We explain interlayer transport in double-wall carbon nanotubes and design a predictive model. Wave function interference is visible at the mesoscale: in the strong coupling regime, as a periodic modulation of quantum conductance and emergent localized states; in the localized-insulating regime, as a suppression of interlayer transport, and oscillations of the density of states. These results could be exploited to design quantum electronic devices.

Related papers