The characteristic gluing problem for the Einstein equations and applications
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: General Relativity and Quantum Cosmology. The day in general relativity and quantum cosmology.
Kai: We're looking at the paper: "The characteristic gluing problem for the Einstein equations and applications".
Mira: Here's the gist of the paper. In this paper we introduce the characteristic gluing problem for the Einstein vacuum equations and show that asymptotically flat data can be characteristically glued to a suitably chosen Kerr spacetime The authors present a codimension-10 gluing construction for characteristic initial data which are close to the Minkowski data and prove that this method yields no loss of decay in the transition region, resolving an open problem The Characteristic Gluing Problem The paper introduces the characteristic gluing problem as a construction of solutions of the Einstein (vacuum) equations given initial data on two transversely intersecting null hypersurfaces connecting spheres S1 and S2 The study naturally starts with the corresponding construction and the study of the space and properties of solutions of the constraint equations In this context, a null hypersurface H, foliated by 2-dimensional compact sections, possesses a degenerate metric g/, defining Riemannian metrics on each Sv, and two null second fundamental forms χ and χb which can be decomposed as χ = χb + 1/2 trχg/, χ = χb + 1/2 trχg/.
Kai: The equations reflect the fact that H is embedded in an ambient spacetime (M, g) satisfying the Einstein vacuum equations Codimension-10 Construction and Charges The core result is a codimension-10 gluing construction for characteristic initial data which are close to the Minkowski data The 10-dimensional obstruction space consists of gauge-invariant charges which are conserved by the linearized null constraint equations By relating these 10 charges to the ADM energy, linear momentum, angular momentum and the center-of-mass we prove that asymptotically flat data can be characteristically glued (including the 10 charges) to the data of a suitably chosen Kerr spacetime This provides an alternative proof of the Corvino–Schoen spacelike gluing construction Localization and Extension Results The method yields a localized version of our construction where the given data restricted on an angular sector is characteristically glued to the Minkowski data restricted on another angular sector This localization can be used to retrieve the Carlotto–Schoen localized spacelike gluing construction without any loss of decay in the transition region, resolving an open problem The method also yields a novel fill-in result, see
12: Gluing to Kerr Spacetime The paper proves that asymptotically flat data can be characteristically glued to a suitably chosen Kerr spacetime Specifically, Theorem 1.3 shows that for strongly asymptotically flat family of characteristic initial data xR·
−δ,δ: ,R on ingoing null hypersurfaces HR·
−δ,δ: ,R (see Sections 2.1, 2.3 and 2.4), there exists a sphere perturbation Spert−R,R in a Kerr spacetime Spacelike Gluing to Kerr As a corollary to Theorem 1.4, we give an alternative proof of the spacelike gluing to Kerr
24, 25, 17: for strongly asymptotically flat spacelike initial data Furthermore, applying the bifurcate characteristic gluing of Theorem 1.2 to Kerr allows one to construct higher-order characteristic initial data on the hypersurface H−R,
R,2R: ∪ H
−2R,−R: ,2R such that the higher-order sphere data on S−R,R agrees with x−R,R and with higherorder Kerr sphere data xKerr−2R,2R on S−2R,2RR Localization of Spacelike Data The methods of the previous sections also yield localization results Theorem 1.10 shows that for given 0 < θ1 < θ2 < π, and for R ≥ 1 sufficiently large, there are angular regions K and K0, a real number c > 0, and a spacelike hypersurface from which the induced spacelike initial data agrees with (g, k) in a cone of aperture θ1 and with the Minkowski spacelike initial data (e, 0) in the complement of a slightly larger cone of aperture θ2 Decay Estimates The proof of Theorem 1.10 relies on the decay estimate kW(n)kX(S1+2c) =O((1 + 2c)−n·R−1), which is derived through an induction process involving recursive relations for the ADM invariants The construction of characteristic initial data on H(1+2c)n−1·R·
1,1+c: ∪H(1+2c)n−1·R·
1+c,1+2c: leads to a spacelike hypersurface in the resulting spacetime which is close to Minkowski This construction yields localized characteristic gluing with slightly enlarged transition region The energy and linear momentum of the constructed spacelike initial data are O(R−1)-close to those of the given spacelike initial data by (7.11) References
1: Y.
Mira: Angelopoulos, S.
Kai: Aretakis, D.
Title and authors: Kai: So we're looking at this paper, "The characteristic gluing problem for the Einstein equations and applications." It seems like it tackles a really fundamental issue in general relativity, dealing with how you can stitch together pieces of solutions.
Mira: Right. The title suggests they are looking at the characteristic gluing problem for the Einstein vacuum equations. It’s about constructing solutions given initial data on two intersecting null hypersurfaces connecting spheres, S1 and S2. It sounds like a deep dive into the constraint equations themselves.
Lev: From an error correction standpoint, this is interesting because we're always dealing with initial data that has to satisfy those constraint equations perfectly before we can even start solving them forward in time.
Kai: Exactly. And they introduce this specific codimension-ten gluing construction for initial data that are close to the Minkowski data <ref:2107.02441#pg1,are close to the Minkowski data>. The ten dimensional obstruction space there consists of gauge invariant charges that are conserved by the linearized null constraint equations, which is a big deal for stability and consistency <ref:2107.02441#pg1,are conserved by the linearized null constraint equations>.
Mira: That's what caught my attention. Relating those ten charges to things like the ADM energy, linear momentum, angular momentum and the center of mass allows them to prove that you can characteristically glue asymptotically flat data to a Kerr spacetime data <ref:2107.02441#pg1,the ADM energy, linear momentum, angular momentum and the center of mass>.
Lev: An alternative proof of the Corvino–Schoen spacelike gluing construction is mentioned as a corollary. That’s useful because if you have a way to prove something in two different ways, it lends confidence in the result.
Kai: And they also derived this localized version of their construction where data restricted on one angular sector gets glued to Minkowski data restricted on another angular sector. They say this resolves an open problem without any loss of decay in the transition region, which is a big win for us.
The paper's summary: Mira: So, summarizing what the authors are actually doing with this characteristic gluing problem for the Einstein vacuum equations. It starts with defining a null hypersurface H foliated by two dimensional compact sections, S1 and S2, which gives you Riemannian metrics on those spheres and two null second fundamental forms, chi and chi sub b.
Kai: They decompose those forms into chi = chi sub b plus half of the trace of the metric on that sphere. This setup reflects that the whole thing is embedded in an ambient spacetime satisfying the Einstein vacuum equations, which is where all their constraint equations come from.
Lev: From my side, this means they are working right at the heart of how to ensure that any initial data we put in respects those fundamental geometric rules dictated by gravity. It’s about making sure the constraints hold when you try to piece things together.
Mira: The core result is that they present a codimension-ten gluing construction for characteristic initial data that are close to the Minkowski data <ref:2107.02441#pg1,present a codimension-10 gluing construction for characteristic initial data>. They show that this ten dimensional obstruction space of gauge invariant charges can be related directly to ADM energy, linear momentum, angular momentum and the center of mass <ref:2107.02441#pg1,ADM energy, linear momentum, angular momentum and the center of mass>.
Kai: So the implication there is that asymptotically flat data can be characteristically glued to a suitably chosen Kerr spacetime data, including those ten charges <ref:2107.02441#pg1,that asymptotically flat data can be characteristically glued>. That’s a significant connection between different types of initial conditions and final black hole solutions.
Lev: For hardware realization, if you were trying to build an error correction code for this gluing process, the fact that these ten charges are conserved by the linearized null constraint equations tells you exactly which quantities you need to monitor throughout the process <ref:2107.02441#pg1,are conserved by the linearized null constraint equations>.
The paper's improvements: Kai: One of the key improvements they highlight is this localized version of their construction. They show how data restricted on one angular sector gets glued to Minkowski data restricted on another angular sector. This localization allows them to retrieve the Carlotto–Schoen localized spacelike gluing construction without any loss of decay in that transition region, which solves an open problem for them.
Mira: That localization is important because it means you can get a sharp estimate in the transition region between those two angular sectors along H. It’s not just a rough patch; it’s controlled.
Lev: If we were to run this on real hardware, that localization would be fantastic for managing the error propagation. You could isolate the region where things are transitioning and apply targeted correction there instead of having to correct everything globally.
Kai: And they also show how you can use higher-order null constraint equations to characterize gluing of higher order sphere data up to order m plus two by analyzing a codimension-ten bifurcate characteristic gluing, which is at the level of C m plus two gluing for the metric components where m is the order of those higher order sphere data <ref:2107.02441#pg1>.
Mira: So they are showing that you can handle more complex initial conditions than just the simplest ones by looking at these higher order constraints. That expands the scope of what kind of data we can glue together systematically.
Lev: From an engineering viewpoint, if you're building a system to handle perturbations, knowing how it scales with higher-order terms helps you predict how much computational overhead that adds to the error correction budget.
Conclusion: Kai: So, wrapping up the discussion on "The characteristic gluing problem for the Einstein equations and applications." They show that by using this codimension-ten construction, they can construct characteristic initial data on H with specific structure, which leads to a spacelike hypersurface in the resulting spacetime that is close to Minkowski <ref:2107.02441#pg1>.
Mira: The crucial point is that this construction yields localized characteristic gluing with a slightly enlarged transition region. And for the energy and linear momentum of that constructed spacelike initial data, they are O of R minus one close to those of the given data by their formula number seven point eleven.
Lev: That O of R minus one closeness is a strong statement about how close you get to Minkowski spacetime when you perform this gluing. It shows that even with this gluing construction, the resulting initial data isn't wildly different from what we start with in terms of mass and momentum scaling.
Kai: The implication is that they have constructed spacelike gluings from Minkowski to Kerr with non-trivial topology, which is a very useful result for understanding how these spacetimes connect. This whole paper, "The characteristic gluing problem for the Einstein equations and applications," gives us a new way to think about connecting initial states to black holes.
Mira: Indeed. It provides an alternative proof of the Corvino–Schoen spacelike gluing construction, which is already a significant result in this area. It also shows that localization techniques can be very effective when applied correctly to avoid losing decay in the transition region, which was an open problem for them.
Lev: For me, it’s about showing that this method works on the scale you care about for real physics—that the error stays controlled near infinity when you are gluing things together. It's a necessary step before we can even think about running these kinds of complex simulations efficiently.
STEFAN ARETAKIS, STEFAN CZIMEK, IGOR RODNIANSKI
University of Toronto · Brown University · Princeton University
gr-qc, math-ph, math.AP, math.DG, math.MP
Submitted: 2021-07-06
Updated: 2021-07-06
Comments: 31 pages, 12 figures
Journal ref: Duke Math. J. 174, no. 2 (2025), 355-403
DOI: 10.1215/00127094-2024-0030
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 87/100
The gist: In this paper we introduce the characteristic gluing problem for the Einstein vacuum equations and show that asymptotically flat data can be characteristically glued to a suitably chosen Kerr…
Key concepts
- Characteristic Gluing Problem
- This is a mathematical challenge involving constructing solutions to Einstein vacuum equations by connecting initial data defined on two different, transversely intersecting null hypersurfaces. It focuses on how these initial conditions can be smoothly joined together while satisfying the underlying physical laws of general relativity.
- Codimension-10 Construction
- The core method uses a 10-dimensional space of gauge-invariant charges conserved by linearized null constraint equations. These charges are related to standard conserved quantities like ADM energy and momentum, allowing the data to be matched precisely to the Kerr spacetime data.
- Localization Results
- The method allows for localizing characteristic gluing along an angular sector. This means constructing a solution that matches the original initial data on one part of a region and matches simple Minkowski data on another part, ensuring no loss of decay in the transition zone.
Terminology
Summary
In this paper we introduce the characteristic gluing problem for the Einstein vacuum equations and show that asymptotically flat data can be characteristically glued to a suitably chosen Kerr spacetime The authors present a codimension-10 gluing construction for characteristic initial data which are close to the Minkowski data and prove that this method yields no loss of decay in the transition region, resolving an open problem
The Characteristic Gluing Problem
The paper introduces the characteristic gluing problem as a construction of solutions of the Einstein (vacuum) equations given initial data on two transversely intersecting null hypersurfaces connecting spheres S1 and S2 The study naturally starts with the corresponding construction and the study of the space and properties of solutions of the constraint equations In this context, a null hypersurface H, foliated by 2-dimensional compact sections, possesses a degenerate metric g/, defining Riemannian metrics on each Sv, and two null second fundamental forms χ and χb which can be decomposed as χ = χb + 1/2 trχg/, χ = χb + 1/2 trχg/. The equations reflect the fact that H is embedded in an ambient spacetime (M, g) satisfying the Einstein vacuum equations
Codimension-10 Construction and Charges
The core result is a codimension-10 gluing construction for characteristic initial data which are close to the Minkowski data The 10-dimensional obstruction space consists of gauge-invariant charges which are conserved by the linearized null constraint equations By relating these 10 charges to the ADM energy, linear momentum, angular momentum and the center-of-mass we prove that asymptotically flat data can be characteristically glued (including the 10 charges) to the data of a suitably chosen Kerr spacetime This provides an alternative proof of the Corvino–Schoen spacelike gluing construction
Localization and Extension Results
The method yields a localized version of our construction where the given data restricted on an angular sector is characteristically glued to the Minkowski data restricted on another angular sector This localization can be used to retrieve the Carlotto–Schoen localized spacelike gluing construction without any loss of decay in the transition region, resolving an open problem The method also yields a novel fill-in result, see [12]
Gluing to Kerr Spacetime
The paper proves that asymptotically flat data can be characteristically glued to a suitably chosen Kerr spacetime Specifically, Theorem 1.3 shows that for strongly asymptotically flat family of characteristic initial data xR·[−δ,δ],R on ingoing null hypersurfaces HR·[−δ,δ],R (see Sections 2. p. 61, 2.3 and 2.4), there exists a sphere perturbation Spert−R,R in a Kerr spacetime
Spacelike Gluing to Kerr
As a corollary to Theorem 1.4, we give an alternative proof of the spacelike gluing to Kerr [24, 25, 17] for strongly asymptotically flat spacelike initial data Furthermore, applying the bifurcate characteristic gluing of Theorem 1. p. 62 to Kerr allows one to construct higher-order characteristic initial data on the hypersurface H−R,[R,2R] ∪ H[−2R,−R],2R such that the higher-order sphere data on S−R,R agrees with x−R,R and with higherorder Kerr sphere data xKerr−2R,2R on S−2R,2RR
Localization of Spacelike Data
The methods of the previous sections also yield localization results Theorem 1.10 shows that for given 0 < θ1 < θ2 < π, and for R ≥ 1 sufficiently large, there are angular regions K and K0, a real number c > 0, and a spacelike hypersurface from which the induced spacelike initial data agrees with (g, k) in a cone of aperture θ1 and with the Minkowski spacelike initial data (e, 0) in the complement of a slightly larger cone of aperture θ2
Decay Estimates
The proof of Theorem 1.10 relies on the decay estimate kW(n)kX(S1+2c) =O((1 + 2c)−n·R−1), which is derived through an induction process involving recursive relations for the ADM invariants
Conclusion
The construction of characteristic initial data on H(1+2c)n−1·R·[1,1+c]∪H(1+2c)n−1·R·[1+c,1+2c] leads to a spacelike hypersurface in the resulting spacetime which is close to Minkowski This construction yields localized characteristic gluing with slightly enlarged transition region The energy and linear momentum of the constructed spacelike initial data are O(R−1)-close to those of the given spacelike initial data by (7.11)
References
[1] Y. Angelopoulos, S. Aretakis, D. p. 0 p. 0 p. 0 p. 0 p. 0 p. 0 p. 0 p. 0 Gajic. Price’s law and precise late-time asymptotics for subextremal Reissner–Nordstr¨om black holes [2] Y. p. 4 p. 4 Angelopoulos, S. Aretakis, D. Gajic. Late-time tails and mode coupling of linear waves on Kerr spacetimes [3] Y. p. 3 p. 3 Angelopoulos, S. Aretakis, D. Gajic. Horizon hair of extremal black holes and measurements at null infinity [4] Y. p. 4 p. 4 Angelopoulos, S. Aretakis, D. Gajic. Late-time asymptotics for the wave equation on spherically symmetric, stationary spacetimes [5] S. p. 4 p. 4 Aretakis. The characteristic gluing problem and conservation laws for the wave equation on null hypersurfaces [6] S. p. 4 p. 4 Aretakis. On a foliation-covariant elliptic operator on null hypersurface [7] S. p. 1 p. 1 Aretakis. Stability and instability of extreme Reissner–Nordstr¨om black hole spacetimes for linear scalar perturbations I. p. 4 p. 4 Comm. Math., 307:17-63, 2011 [8] S. Aretakis. Stability and instability of extreme Reissner–Nordstr¨om black hole spacetimes for linear scalar perturbations II. p. 4 p. 4 Ann Henri Poincaré, 12:1491-1538, 2011 [9] S. Aretakis. Horizon instability of extremal black holes [10] S. p. 4 p. 4 Aretakis, S. p. 0 p. 0 p. 0 p. 0 p. 0 p. 0 Czimek, I. Rodnianski. p. 0 p. 0 p. 0 p. 0 p. 0 p. 0 p. 0 The characteristic gluing problem for the Einstein vacuum equations [11] S. p. 0 p. 0 Aretakis, S. Czimek, I. Rodnianski. Characteristic gluing to the Kerr family and application to spacelike gluing [12] S. p. 6 p. 6 Aretakis, S. Czimek, I. Rodnianski. Applications of characteristic gluing in preparation [13] A. p. 0 Carlotto. The general relativistic constraint equations [14] A. p. 1 Carlotto, R. p. 0 Schoen. Localizing solutions of the Einstein constraint equations [15] D. p. 1 p. 1 Christodoulou. The formation of black holes in general relativity [16] P. p. 1 p. 1 Chru´sciel, E. p. 4 p. 4 p. 4 p. 4 p. 4 p. 4 Delay. Existence of non-trivial, vacuum, asymptotically simple spacetimes [17] P. p. 2 p. 2 Chru´sciel, E. Delay. On mapping properties of the general relativistic constraints operator in weighted function spaces, with applications [18] P. p. 2 p. 2 Chru´sciel, E. Delay. Exotic hyperbolic gluings [19] P. p. 9 p. 9 Chru´sciel, J. p. 4 p. 4 p. 4 p. 4 Isenberg, D. p. 4 p. 4 p. 4 p. 4 p. 4 Pollack. Gluing initial data sets for general relativity [20] P. p. 1 p. 1 Chru´sciel, J. Isenberg, D. Pollack. Initial data engineering [21] P. p. 0 p. 0 Chru´sciel, R. p. 4 p. 4 Mazzeo. On ’many-black-hole’ vacuum spacetimes [22] P. p. 4 p. 4 Chru´sciel, D. p. 4 p. 4 Pollack. Singular Yamabe metrics and initial data with exactly Kottler-Schwarzschild-de Sitter ends [23] J. p. 4 Cortier. Gluing construction of initial data with Kerr-de Sitter ends [24] J. p. 0 Corvino. Scalar Curvature Deformation and a Gluing Construction for the Einstein Constraint Equations [25] J. p. 4 Corvino, R. p. 0 Schoen. On the Asymptotics for the Vacuum Einstein Constraint Equations [30] J. p. 0 Isenberg, D. Maxwell, D. p. 4 Pollack. A gluing construction for non-vacuum solutions of the Einstein-constraint equations [31] J. p. 1 Isenberg, R. p. 4 p. 4 Mazzeo, D. Pollack. Gluing and wormholes for the Einstein constraint equations [32] J. p. 0 Isenberg, R. Mazzeo, D. Pollack. On the topology of vacuum spacetimes [34] P. p. 4 LeFloch, T. Nguyen. The seed-to-solution for the Einstein equations and the asymptotic localization problem [35] A Lichnerowicz. p. 3 L’int´egration des equations de la gravitation relativiste et le problème des n-corps [36] J. Luk. On the local existence for the characteristic initial value problem in general relativity [37] J. p. 1 Luk, I. Rodnianski. Local propagation of impulsive gravitational waves [40] R. p. 2 Schoen, S. Yau. On the structure of manifolds with positive scalar curvature [41] R. p. 4 Schoen, S. Yau. On the proof of the positive mass conjecture in general relativity [42] R. p. 4 Schoen, S. Yau. Proof of the positive mass theorem II. p. 1 Comm Math., 79 (2), 1981, 231-260 [43] R. Wald. General Relativity [44] E. p. 1 Witten. A new proof of the positive energy theorem]>
Summary
In this paper we introduce the characteristic gluing problem for the Einstein vacuum equations and show that asymptotically flat data can be characteristically glued to a suitably chosen Kerr spacetime The authors present a codimension-10 gluing construction for characteristic initial data which are close to the Minkowski data and prove that this method yields no loss of decay in the transition region, resolving an open problem
Pruning redundant reasoning tokens
The paper introduces the characteristic gluing problem as a construction of solutions of the Einstein (vacuum) equations given initial data on two transversely intersecting null hypersurfaces connecting spheres S1 and S2 The study naturally starts with the corresponding construction and the study of the space and properties of solutions of the constraint equations In this context, a null hypersurface H, foliated by 2-dimensional compact sections, possesses a degenerate metric g/, defining Riemannian metrics on each Sv, and two null second fundamental forms χ and χb which can be decomposed as χ = χb + 1/2 trχg/, χ = χb + 1/2 trχg/. The equations reflect the fact that H is embedded in an ambient spacetime (M, g) satisfying the Einstein vacuum equations
How the training signal is built
The core result is a codimension-10 gluing construction for characteristic initial data which are close to the Minkowski data The 10-dimensional obstruction space consists of gauge-invariant charges which are conserved by the linearized null constraint equations By relating these 10 charges to the ADM energy, linear momentum, angular momentum and the center-of-mass we prove that asymptotically flat data can be characteristically glued (including the 10 charges) to the data of a suitably chosen Kerr spacetime
Where the gains come from
The authors demonstrate that for strongly asymptotically flat spacelike initial data, there exists an extension to Kerr, i.e. spacelike initial data (R cubed, g0, k0) which isometrically contains (BR, g, k) and equals Kerr spacelike initial data outside a compact set Furthermore, the characteristic gluing approach allows us to establish an extension result as follows: for local spacelike initial data close to Minkowski, an extension result (but not to Kerr) was proved by the second author in [26]
Spacelike Gluing and Localization
The authors show how to localize small characteristic data along an angular sector of a null hypersurface H by constructing a solution such that it agrees with the original solution on an initial section S1 of H and on an angular sector K0 of the null hypersurface of H, and it agrees with the trivial Minkowski data on the complement of a slightly larger angular sector K0 This construction yields sharp estimates in the transition region K K0 between the two angular sectors along H and can be used to retrieve the Carlotto–Schoen [14] construction without any loss of decay in the transition region, hence resolving an open problem
The authors prove that for vectors (E0, P0,L0, C0) satisfying certain conditions, there exists a spacelike hypersurface Σ in the exterior region of a Kerr spacetime such that the induced spacelike initial data (Σ, g, k) is asymptotically flat with Regge-Teitelbaum conditions
The authors conclude by showing that for R ≥ 1 large, there exists (E0, P0,L0, C0) such that the matching error of charges vanishes In other words, we have characteristic gluing of sphere data from x−R,R on S−R,R to the sphere data xKerr−R2RR corresponding to the vector (E0, P0,L0, C0) This construction allows us to construct spacelike gluings from Minkowski to Kerr with non-trivial topology
[1] Y. Angelopoulos, S. Aretakis, D. Gajic. Price’s law and precise late-time asymptotics for subextremal Reissner–Nordstr¨om black holes [2] Y. Angelopoulos, S. Aretakis, D. Gajic. Late-time tails and mode coupling of linear waves on Kerr spacetimes [3] Y. Angelopoulos, S. Aretakis, D. Gajic. Horizon hair of extremal black holes and measurements at null infinity [4] Y. Angelopoulos, S. Aretakis, D. Gajic. Late-time asymptotics for the wave equation on spherically symmetric, stationary spacetimes [5] S. Aretakis. The characteristic gluing problem and conservation laws for the wave equation on null hypersurfaces [6] S. Aretakis. On a foliation-covariant elliptic operator on null hypersurface [7] S. Aretakis. Stability and instability of extreme Reissner–Nordstr¨om black hole spacetimes for linear scalar perturbations I. Comm., 307:17-63, 2011 [8] S. Aretakis. Stability and instability of extreme Reissner–Nordstr¨om black hole spacetimes for linear scalar perturbations II. Ann Henri Poincaré, 12:1491-1538, 2011 [9] S. Aretakis. Horizon instability of extremal black holes [10] S. Aretakis, S. Czimek, I. Rodnianski. The characteristic gluing problem for the Einstein vacuum equations [11] S. Aretakis, S. Czimek, I. Rodnianski. Characteristic gluing to the Kerr family and application to spacelike gluing [12] S. Aretakis, S. Czimek, I. Rodnianski. Applications of characteristic gluing in preparation [13] A Carlotto. p. 0 The general relativistic constraint equations [14] A Carlotto, R. p. 1 Schoen. Localizing solutions of the Einstein constraint equations [15] D. Christodoulou. The formation of black holes in general relativity [16] P. Chru´sciel, E. Delay. Existence of non-trivial, vacuum, asymptotically simple spacetimes [17] P. Chru´sciel, E. Delay. On mapping properties of the general relativistic constraints operator in weighted function spaces, with applications [18] P. Chru´sciel, E. Delay. Exotic hyperbolic gluings [19] P. Chru´sciel, J. Isenberg, D. Pollack. Gluing initial data sets for general relativity [20] P. Chru´sciel, J. Isenberg, D. Pollack. Initial data engineering [21] P. Chru´sciel, R. Mazzeo. On ’many-black-hole’ vacuum spacetimes [22] P. Chru´sciel, D. Pollack. Singular Yamabe metrics and initial data with exactly Kottler-Schwarzschild-de Sitter ends]>
The authors demonstrate that for strongly asymptotically flat spacelike initial data, there exists an extension to Kerr, i.e.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved AI system will be capable of performing characteristic gluing constructions for Einstein vacuum equations by identifying 10-dimensional obstruction spaces consisting of gauge-invariant charges conserved by linearized null constraint equations. This allows the system to characterize how asymptotically flat data can be characteristically glued to Kerr spacetime data, providing an alternative proof of the Corvino–Schoen spacelike gluing construction.
-
The improved AI system will be able to perform localized characteristic gluing of small characteristic data along an angular sector by constructing a solution that agrees with the original data on one section and trivial Minkowski data on a later section, resolving an open problem without loss of decay in the transition region, thereby providing an alternative proof of the Carlotto–Schoen localized spacelike gluing construction.
-
The system can utilize higher-order null constraint equations to characterize the gluing of higher-order sphere data up to order m+2 by analyzing a codimension-10 bifurcate characteristic gluing, which is at the level of C m+2-gluing for the metric components where m >= 0 is the order of the higher-order sphere data.
-
The AI can perform spacelike gluing to Kerr for strongly asymptotically flat spacelike initial data by applying Theorem 1.10, which constructs a solution on a hypersurface that agrees with original data in an aperture theta one and Minkowski data in the complement of a slightly larger aperture theta two, ensuring asymptotic flatness and close matching of ADM energy and linear momentum.
-
The system can construct exotic spacelike initial data by applying Theorem 1.11 to glue the Minkowski ball to Kerr, demonstrating that characteristic gluing methods can be used for non-trivial topologies, yielding spacelike initial data isometric to Kerr outside a compact set with ADM invariants close to the original ones.
Sources
- Price's law and precise late-time asymptotics for subextremal Reissner-Nordstr\"om black holes
- Late-time tails and mode coupling of linear waves on Kerr spacetimes
- The characteristic gluing problem and conservation laws for the wave equation on null hypersurfaces
- The seed-to-solution method for the Einstein constraints and the asymptotic localization problem
- Sharp decay estimates for massless Dirac fields on a Schwarzschild background
Related papers
- Accurate waveforms for generic planar-orbit binary black holes: The multipolar effective-one-body model SEOBNRv6EHM
- Analytic Marginalization Over Calibration Uncertainties in Gravitational Wave Inference and Application to Black Hole Ringdown
- A catalog of long, eccentric and precessing binary black hole simulations from ICTS-TIFR
- Pole Skipping, Avoided Crossing, and Resonant Excitation in Kerr Quasinormal Modes near Algebraically Special Frequencies
- Gravitational Waves from Green's Function Decomposition for a Kerr black hole: I. Equatorial ISCO Plunge
- A New Spin on Dissipative Tides: First-Post-Newtonian Effects in Compact Binary Inspirals