Spurious-Free Lithium Niobate Bulk Acoustic Wave Resonator with Grounded-Ring Electrode
summary
The gist
High-performance piezoelectric resonators are promising energy storage elements for piezoelectric power conversion due to their compact footprint and low loss at frequencies where conventional…
In short
Researchers developed a grounded-ring Lithium Niobate bulk acoustic wave resonator to create a high-performance piezoelectric device. The design successfully suppressed unwanted spurious modes, achieving an electromechanical coupling coefficient of 29.6% and a figure of merit of 1548 at 10.14 MHz, proving it a viable platform for compact power conversion.
Key concepts
- Piezoelectric Resonators
- These are energy storage elements that use the mechanical vibration of a material (like Lithium Niobate) to store electrical energy and convert it back into electricity. They are promising because they are small and efficient, especially at high frequencies where traditional magnetic components become too large.
- Spurious Mode Suppression
- This is the process of designing a structure so that unwanted, unwanted vibrations (spurious modes) do not occur when the device is operating. The new grounded-ring electrode design achieves this by creating a smooth resistance curve, which effectively eliminates these unwanted modes in the operating frequency band.
- Figure of Merit (FoM)
- The FoM is a key performance metric for resonators, calculated using the quality factor (Q) and the electromechanical coupling coefficient (k²). A higher FoM indicates a better resonator because it means more energy is stored and converted efficiently at that specific frequency.
Terminology used across episodes
This episode discusses
- Spurious-Free Lithium Niobate Bulk Acoustic Wave Resonator with Grounded-Ring Electrode · Paper Radio
- Periodically Poled Piezoelectric Lithium Niobate Resonator for Piezoelectric Power Conversion
- Lithium Tantalate Bulk Acoustic Resonator For Piezoelectric Power Conversion
- Single-Crystal AlN Wafer-Based Bulk Acoustic Resonators for Piezoelectric Power Conversion
The paper
Spurious-Free Lithium Niobate Bulk Acoustic Wave Resonator with Grounded-Ring Electrode · Read on arXiv
University of Texas at Austin · Stanford University · Polytec GMBH
High-performance piezoelectric resonators are promising energy-storage elements for piezoelectric power conversion because of their compact footprint and low loss at frequencies where conventional magnetic components become bulky and inefficient. However, their practical use is often limited by the trade-off between a high electromechanical coupling coefficient (k squared) for wide-band operation and the emergence of spurious acoustic modes that limit the resonators' inductive bandwidth. This work reports a spurious-free thickness-extensional (TE)-mode bulk acoustic wave (BAW) resonator in single-crystal lithium niobate (LN) based on a grounded-ring electrode architecture. The proposed structure is analyzed through simulation and experimentally validated using electrical characterization and laser Doppler vibrometry (LDV). The results show that the grounded ring modifies the effective boundary conditions of the acoustic device, enabling a piston-like modal response that suppresses lateral spurious modes across the inductive band. The demonstrated device operates at 10.14 MHz and achieves an electromechanical coupling coefficient of 29.6%, a maximum in-band Bode quality factor (Q Bode) of 5230, and a figure of merit (FoM, Q times k squared) of 1548. These results establish the grounded-ring TE-mode LN BAW resonator as a practical platform for piezoelectric power conversion and a broader design approach for realizing high-performance spurious-free acoustic resonators.
DOI: 10.1109/TUSON.2026.3738013
Transcript
Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.
Rosa: I'm Rosa.
Dev: And I'm Dev, here with Taro.
Rosa: We're looking at the paper: "Spurious-Free Lithium Niobate Bulk Acoustic Wave Resonator with Grounded-Ring Electrode".
Dev: Here's the gist of the paper. High-performance piezoelectric resonators are promising energy storage elements for piezoelectric power conversion due to their compact footprint and low loss at frequencies where conventional magnetic components become bulky and inefficient.
Rosa: The proposed structure is analyzed through simulation and experimentally validated using electrical characterization and laser Doppler vibrometry (LDV) Device Performance Metrics The demonstrated device operates at 10.14 MHz and achieves an electromechanical coupling coefficient of 29.6%, a maximum in-band Bode quality factor (QBode) of 5230, and a figure of merit (FoM, Q · k2) of 1548.
Dev: These results establish the grounded-ring TE-mode LN BAW resonator as a practical platform for piezoelectric power conversion and a broader design approach for realizing high-performance spurious-free acoustic resonators.
Rosa: Spurious Mode Suppression Mechanism The mechanism for spurious-mode suppression is based on a novel electrode design The structure comprises three distinct regions: an active area defined by a signal-top and a ground-bottom electrode, a non-metalized sub-wavelength gap, and a metalized ring region surrounding the active area.
Paper summary: Dev: Looking at the title of "Spurious-Free Lithium Niobate Bulk Acoustic Wave Resonator with Grounded-Ring Electrode", what’s the big picture implication of this specific design? It sounds very focused on fixing a problem that plagues these devices.
Taro: I think it means that for high frequency acoustic applications, we can get better efficiency and bandwidth if we stop looking at just the material properties and start looking at how you structure the device boundary conditions.
Rosa: Exactly. They are showing that by adding this grounded ring, they can engineer a smoother resistance curve, which effectively eliminates those unwanted in-band spurious modes by exciting that piston-like modal response across the inductive band.
Dev: It’s about moving toward a design approach for realizing high performance spurious-free acoustic resonators, not just one specific device. This suggests a broader design principle here that might apply to other BAW applications where those modes are critical.
Taro: So, in simple terms, this paper shows how changing the geometry around the piezoelectric material—specifically with that grounded ring—allows you to maintain high performance even when you're operating right in the middle of your desired frequency range.
Rosa: It establishes the grounded-ring TE-mode resonator as a promising platform for compact, high-efficiency, and high-power-density piezoelectric power converters. That’s the practical application they are pointing toward.
Dev: Yeah, it’s a concrete result: ten point one four MHz with that specific set of numbers—k squared of twenty-nine point six percent and an FoM of one thousand five hundred forty-eight—showing a path forward for power conversion <ref:2604.06426#pg2>.
Conclusion: Rosa: So we’ve been looking at this paper about the grounded ring electrode and how it cleans up these acoustic resonators.
Dev: It’s all about getting rid of those unwanted modes that mess up your performance right when you need it most, in the in-band range.
Rosa: The authors are focusing on this specific structure to make sure you get a smooth resistance curve across the whole operating band.
Dev: They show their results using a material called lithium niobate at ten point one four megahertz and they got a figure of merit of fifteen hundred forty eight.
Rosa: That number shows they’ve built something that works well for practical piezoelectric power conversion, which is pretty significant for compact designs.
Dev: It means this isn't just a lab curiosity; it’s a platform that could actually be used in real hardware to store energy efficiently at these high frequencies.
Rosa: The big picture here is making these devices smaller and more powerful because you’re not wasting energy on those spurious modes anymore.
Dev: This design approach, using the grounded ring, might just be a useful template for other types of bulk acoustic wave devices where avoiding those unwanted noise modes is crucial.
Rosa: We’ll look at how they tested this outside the lab and if it holds up when things get messy in the real world next.
More episodes
- 2608.13438-ContactGuard: Pre-Contact Execution Monitoring with Action-Conditioned Latent World Models
- 2610.34593-Future Prediction as Training-Only Video Supervision for Pretrained VLA Policies
- 2610.35385-EmbodiedLab: Beyond Manipulation, Benchmarking Embodied Agents That Act to Know
- 2610.36378-Data-Driven Hamiltonian for Neural Optimal Control
- 2610.37275-A Heuristic for Scheduling Autonomous Vehicles at Intersections
- 2610.37288-Dynamic Coordination of Autonomous Vehicles at Intersections
- 2610.37632-Real-Time Coordination of Autonomous Vehicles at Intersections
- 2611.13779-Softness is something you also need! Why compliance helps control: information metrics of a passive walker with compliant ankle
- 2611.13411-Residual-Corrected Physics-Informed Neural Network KKL Observers with Input-to-State Stability Guarantees
- 2611.14488-Is Your Robot's Memory Just a Clock? Temporal Shortcuts in Memory-Augmented VLA Policies