Loss-insensitive reduction of amplified quantum noise in a Raman amplifier with coherent feedback

summary

The gist

The single-path coherent feedback amplifier reduces quantum noise in a Raman amplifier by approximately 6 dB…

In short

The study investigated a single-path coherent feedback amplifier using a Raman amplifier to reduce quantum noise. The method involves recycling a portion of the output Stokes field back into the amplifier, creating quantum correlations internally. Results showed a 6 dB reduction in output noise, which remains effective even when the amplifier experiences significant loss (up to 6 dB), proving the noise reduction is loss-insensitive.

Key concepts

Quantum Noise in Amplifiers
Amplifiers inherently add extra noise by coupling to internal parts while boosting the signal. Quantum fluctuations play a role here, and without proper control, this can degrade the signal-to-noise ratio by 3 dB.
Coherent Feedback Architecture
This architecture combines correlation generation and amplification into one device. It uses the amplifier's own output to create internal quantum correlations, eliminating the need for external entanglement sources or mode matching, making it a simpler and more robust method for noise control.
Loss Insensitivity
The paper demonstrates that the noise reduction achieved by coherent feedback is not ruined by losses. Even when the amplifier suffers significant loss (up to 6 dB), the quantum noise suppression effect persists, unlike common assumptions where losses always worsen quantum performance.

Terminology used across episodes

This episode discusses

The paper

Loss-insensitive reduction of amplified quantum noise in a Raman amplifier with coherent feedback · Read on arXiv

Jianmin Wang, Rong Zhu, Z. Y. Ou

City University of Hong Kong

A quantum amplifier usually adds extra noise inevitably through coupling to internal degrees of freedom while amplifying the signal. The introduction of quantum correlations can effectively suppress this extra noise. In this work, we utilize the established quantum correlation between the Stokes field and atomic spin waves in the Raman amplification process to feed back a portion of the Stokes field into the amplifier. This leads to a reduction in amplified quantum noise that is independent of the feedback loss at high gain. A maximum of 6 dB noise reduction is observed. The single-path feedback amplifier is found to be sensitive to the feedback phase due to quantum interference, and we experimentally demonstrate an improvement in the signal-to-noise ratio of 4.4 plus or minus 0.7 dB for a phase signal encoded in the feedback loop compared to the case without feedback. This general concept can be extended to integrated optics and fiber-optic systems with potential applications in quantum precision measurement.

Transcript

Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.

Kai: We're looking at the paper: "Loss-insensitive reduction of amplified quantum noise in a Raman amplifier with coherent feedback".

Paper summary: Kai: We’ve been looking at the paper "Loss-insensitive reduction of amplified quantum noise in a Raman amplifier with coherent feedback," and it really boils down to this single-amplifier coherent feedback scheme having a simple structure and low noise, plus that loss insensitivity.

Mira: Yeah, so the authors show experimentally that they got a six decibel reduction of the amplifier’s output noise in an atomic Raman amplifier, and their theoretical analysis backs up those experimental results.

Lev: What this means for us is that we have a configuration where you get significant noise suppression without having to worry about external entanglement sources being lost or mismatched by the time they reach our device.

Kai: The paper points out that the intrinsic correspondence between the recycled optical field and the amplifier’s internal mode inherently eliminates those mode mismatch issues, which is a big win for integrated photonics.

Mira: Beyond just reducing noise, this single-amplifier coherent feedback scheme offers potential for further advancement in on-chip squeezing within integrated photonics because it's self-contained.

Lev: It’s good to see that the experimental results align so well with the detailed theoretical analysis they did, which gives us confidence in implementing this kind of noise reduction mechanism on real hardware.

Conclusion: Kai: So, we're looking at this paper by Wang and Zhu on loss insensitivity in Raman amplifiers using coherent feedback, and it’s all about how they manage the noise that builds up when you amplify a signal.

Mira: Right, they show how this single-path feedback setup lets you reduce that output noise level by six decibels in an atomic Raman amplifier. It's pretty neat because it doesn't seem to care much about the loss of light in the system.

Lev: I’m interested because typically when you add feedback loops, losses just eat your noise advantage, so seeing something that stays relatively stable even when the loss is high—like seven point five percent—that’s a practical thing for building real hardware.

Kai: Yeah, it really shows how this coherent feedback architecture works by recycling the amplifier's own output to create these internal correlations without needing any external entanglement sources or complicated mode matching.

Mira: The core idea is that by tapping a small piece of the Stokes field and feeding it back into the amplifier, you prepare atoms in states correlated with that input field, which squeezes out the excess quantum noise added by amplification.

Lev: From an engineering standpoint, if this works as described, it means we can build these low-noise devices on-chip without needing to maintain perfect vacuum conditions for external squeezing sources everywhere.

Kai: Exactly. The authors are pointing toward a configuration that has potential for dual-phase responsiveness—meaning you could control both the optical phase and the atomic state at once, which is important for sensor development.

Mira: That's what I'm thinking too. Because this single-amplifier scheme inherently links the recycled optical field to the amplifier's internal mode, which cuts out those frustrating mode mismatch issues we usually have with two-component setups.

Lev: So, it’s simple structure, low noise, and loss insensitivity. That’s a nice combination for someone trying to move this from theory into a functioning quantum sensor on a chip.

Kai: It seems like the next step is figuring out how robust this becomes when you actually try to implement the dual-phase control aspect they mention in their conclusion.

More episodes

← Home