M-SHIVA 1.0: A Relativistic Resistive MHD Code for Heavy-Ion Collisions, with Applications to Momentum Anisotropy and Joule Heating in QGP

summary

The gist

M-SHIVA 1.0 presents a (2 + 1)-dimensional relativistic resistive magnetohydrodynamics code for heavy-ion collisions in Cartesian and boost-invariant Milne coordinates The ratio of Joule heating to…

In short

M-SHIVA 1.0 is a 2+1 dimensional relativistic magnetohydrodynamics code simulating heavy-ion collisions using Milne coordinates. It investigates how electromagnetic fields affect momentum anisotropy and energy transfer in the expanding quark-gluon plasma (QGP). The study shows that resistive heating is negligible compared to expansion cooling at high energies, but it highlights the conductivity dependence of electromagnetic energy transfer.

Key concepts

Relativistic Resistive Magnetohydrodynamics (RRMHD)
This framework describes how charged fluids and magnetic fields interact in relativistic heavy-ion collisions. It solves coupled equations for fluid motion, energy conservation, and Maxwell's equations simultaneously. It is necessary because the conductivity of the plasma affects how these fields evolve over time.
Implicit-Explicit (IMEX) Scheme
This is a numerical method used to solve complex differential equations in the code. It handles stiff terms—like those related to high electrical conductivity—by treating them implicitly (more accurately) while treating the rest of the equations explicitly. This allows for stable and efficient simulation even when conductivity changes rapidly.
Joule Heating
Joule heating is a form of irreversible energy dissipation that occurs when an electric current flows through a resistive medium, like the quark-gluon plasma. In this study, it is separated from mechanical work to see how much it contributes to the total energy evolution during the collision.
Momentum Anisotropy
This refers to the uneven distribution of momentum within a fluid, meaning that particles move differently in different directions. The code investigates how electromagnetic fields influence this anisotropy and how energy moves between the matter and the electromagnetic field.

Terminology used across episodes

This episode discusses

The paper

M-SHIVA 1.0: A Relativistic Resistive MHD Code for Heavy-Ion Collisions, with Applications to Momentum Anisotropy and Joule Heating in QGP · Read on arXiv

Krishanu Sengupta, Victor Roy

National Institute of Science Education and Research · Homi Bhabha National Institute

Transcript

Introduction to the show: ident: Nuclear Theory. The day in nuclear theory: structure, reactions and the models behind them.

Kai: We're looking at the paper: "M-SHIVA 1.0: A Relativistic Resistive MHD Code for Heavy-Ion Collisions, with Applications to Momentum Anisotropy and Joule Heating in QGP".

Mira: Here's the gist of the paper. M-SHIVA 1.0 presents a (2 + 1)-dimensional relativistic resistive magnetohydrodynamics code for heavy-ion collisions in Cartesian and boost-invariant Milne coordinates The ratio of Joule heating to expansion cooling lies approximately in the range 10−14–10−11 for Pb+Pb collisions at 2.76 TeV, 10−8–10−5 for Au+Au collisions at 200 GeV and 10−7–10−4 at 62.4 GeV Code Development and Numerical Methodology The code, M-SHIVA 1.0, is a (2 + 1)-dimensional relativistic resistive magnetohydrodynamics code that treats inviscid dynamics and employs an implicit-explicit (IMEX) Runge–Kutta scheme for the stiff conductivity-dependent terms It uses a generalized Lagrange multiplier (GLM) formulation to preserve Maxwell constraints, which is necessary because truncation errors can generate non-zero values of the divergence of the magnetic field and of the Gauss law for the electric field The numerical implementation involves a two-step process where numerical fluxes are computed using a piecewise-linear total-variation-diminishing reconstruction with the minmod limiter These fluxes are then used to evolve the conserved variables in time via a finite-volume scheme Physical System Setup and Initialization The simulations investigate momentum anisotropy and electromagnetic energy transfer in an expanding quark–gluon plasma (QGP) Initial conditions are constructed using optical-Glauber matter profiles for the energy density and spectator-generated electromagnetic fields from Monte Carlo Glauber models for proton positions The evolution is performed in Milne coordinates, which is well suited for describing boost-invariant longitudinal expansion in high-energy heavy-ion collisions The initial electromagnetic fields are sourced exclusively by spectator protons, and the local temperature is obtained from the lattice-QCD EoS Benchmark Testing and Results The code is tested against several important benchmarks, including standard shock-tube, cylindrical-blast-wave and relativistic-rotor problems In Cartesian coordinates, the Brio–Wu shocktube test examines the one-dimensional shockcapturing capability of the HLL scheme and its approach to the ideal-relativistic MHD limit with increasing electrical conductivity In (2 + 1)-dimensional Cartesian coordinates, a strong cylindrical explosion test demonstrates numerical robustness in the presence of strong shocks, anisotropic magnetic stresses, and steep electromagnetic gradients Electromagnetic Energy Transfer Analysis The study separates the electromagnetic work into mechanical Lorentz-force work and irreversible Joule heating The decomposition of the total normalized momentum anisotropy into matter and electromagnetic contributions shows that the direct contribution from the electromagnetic field is the dominant effect, while the matter momentum anisotropy deviates only weakly from its zero-field evolution The irreversible Joule heating density QJ is a positive definite source that opposes the reduction of the matter internal energy caused by expansion For the collision energies considered, Joule heating produces no appreciable modification of the bulk thermal evolution The conductivity dependence of the matter and total momentum anisotropies, εM p and εtot p, is not appreciably affected within the considered range The present heavy-ion calculation primarily establishes the conductivity dependence of the electromagnetic energy transfer within the RRMHD framework The results suggest that Joule heating becomes increasingly important at still lower energies, such as those probed in the RHIC Beam Energy Scan and at FAIR and NICA Acknowledgments V.R.

Kai: acknowledges support from the ANRF Core Research Grant (grant no.

Mira: CRG/2023/001309) We would also like to thank Reghukrishnan Gangadharan for the valuable discussions K.S, and V.R also acknowledges Department of Atomic Energy (DAE), India for financial support The paper is 2611.13899.

Kai: EVERY sentence must end with a reference token.

Paper summary: Mira: So to wrap up this paper, M-SHIVA one point zero provides a framework for understanding momentum anisotropy and electromagnetic energy transfer in an expanding quark gluon plasma QGP one <ref:2611.13899#pg1,momentum anisotropy and electromagnetic energy transfer in an expanding quark gluon plasma>. The authors used the code to study how the fields affect the system when they are in an elliptic fireball setup one <ref:2611.13899#pg1>. It shows that the electromagnetic field's direct contribution to transverse stress tensor dominates over changes to matter anisotropy one <ref:2611.13899#pg1>.

Kai: The title itself, M-SHIVA one point zero: A Relativistic Resistive MHD Code for Heavy-Ion Collisions, with Applications to Momentum Anisotropy and Joule Heating in QGP, frames the whole thing perfectly one <ref:2611.13899#pg1,M-SHIVA 1.0: A Relativistic Resistive MHD Code for Heavy-Ion>. It’s not just solving the equations; it's specifically looking at how resistive heating compares to expansion cooling one <ref:2611.13899#pg1>.

Lev: What this means for us is that even though resistive heating gets bigger as you lower the collision energy, it still doesn't significantly alter the bulk thermal evolution of these systems one <ref:2611.13899#pg1>. This paper establishes the conductivity dependence of electromagnetic energy transfer within this specific resistive magnetohydrodynamics framework one <ref:2611.13899#pg1>.

Kai: It’s a solid piece of work because they connect the theoretical setup to concrete results from established benchmarks like shock tube and cylindrical blast wave problems one <ref:2611.13899#pg1>. It gives us a tool to look at these complex electromagnetic dynamics in an expanding background one <ref:2611.13899#pg1>.

Conclusion: Mira: So we’ve been looking at M-SHIVA one point zero, and now we’re getting to the wrap up on this paper about momentum anisotropy and Joule heating in a quark gluon plasma one.

Kai: The title itself says it's a resistive magnetohydrodynamics code for heavy-ion collisions, which means they built something that handles the fluid motion and the magnetic fields when there's some electrical resistance involved one.

Lev: Right, it’s not just ideal MHD; they’re dealing with finite conductivity terms in their equations, so we need to know how those stiff source terms behave on real hardware, which is where this code comes in one.

Mira: The authors use a (two + one) -dimensional setup in Milne coordinates, which is great because it handles that longitudinal expansion you see in these collisions really well one.

Kai: They tested it against some standard benchmarks like shock tubes and cylindrical blast waves to make sure the code itself is numerically stable before they applied it to the QGP stuff two.

Lev: And they used a generalized Lagrange multiplier formulation to keep those Maxwell constraints satisfied, which is crucial because numerical errors can easily mess up magnetic field divergence one.

Mira: The big result here is about how Joule heating compares to expansion cooling in an expanding quark gluon plasma one. It shows the ratio is very small, around ten to one hundred times smaller than the cooling effect one.

Kai: That means that while resistive heating gets bigger as the collision energy drops, it still doesn't change the overall thermal evolution of these systems significantly two.

Lev: For us on hardware, this suggests that if we were trying to model this on a real system, the overhead from tracking all those conductivity-dependent effects might be manageable at certain scales one.

Mira: So what does this mean for us in the big picture? It tells us that for these specific collision energies, you don't need to worry about resistive heating dominating the thermal dynamics one.

Kai: But it does set up a baseline; it shows exactly how much energy transfer happens through resistivity, which is important context before we look at lower energies two.

More episodes

← Home