Measurement of the 169 Tm (gamma,n) 168 Tm Cross Section and Implications for gamma-Process Calculations

summary

The gist

The 169Tm(γ, n) 168Tm cross section was measured at SLEGS with quasi-monoenergetic LCS γ-ray beams from 8.27 MeV to 14.61 MeV.

In short

This study measured the cross section for 169Tm(gamma,n) 168Tm using quasi-monoenergetic gamma rays from 8.27 to 14.61 MeV at SLEGS. The results constrain the energy dependence of this reaction, leading to an E1 strength function that agrees with existing data and has a negligible effect on supernova nucleosynthesis calculations.

Key concepts

Cross Section Measurement
This involves experimentally determining the probability that a specific nuclear reaction, like 169Tm absorbing a gamma ray and emitting neutrons, will occur at different energies. The researchers used laser-Compton-scattering gamma rays to measure this probability across a specific energy range.
Excitation Function
This describes how the cross section of the reaction changes as the energy of the incoming gamma ray changes. By measuring this function, scientists can understand the underlying nuclear structure and how these reactions behave under different conditions.
E1 Strength Function
This function represents a key property of nuclei, specifically related to electric dipole (E1) transitions. The measurement helped constrain this function by comparing it with other data sets, which is crucial for accurately calculating stellar reaction rates.
Stellar Reaction Rate
This refers to the rate at which nuclear reactions occur within stars or during events like core-collapse supernovae. The constrained cross section data allowed researchers to calculate these rates, showing that the revised rate has a small impact on final p-nucleus abundances.

Terminology used across episodes

This episode discusses

The paper

Measurement of the 169 Tm (gamma,n) 168 Tm Cross Section and Implications for gamma-Process Calculations · Read on arXiv

De-Xin Wang, Su-Ya-La-Tu Zhang, Zi-Rui Hao, Han Guo, Wen-Yu Xin, Guo Li, Yong-Shun Huang, Jin Feng Bai, © Kai Wang, © Mei-Rong Huang, П Bao-Shan Xi

Institute of Nuclear Physics, College of Physics and Electronic Information, Inner Mongolia Minzu University · Shanghai Advanced Research Institute, Chinese Academy of Sciences · Institute of Astronomy and Physics, Inner Mongolia University · CAS Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences · HUN-REN Institute of Nuclear Research (ATOMKI) · University of Chinese Academy of Sciences

The 169 Tm(γ,n) 168 Tm cross section has been measured at the Shanghai Laser Electron Gamma Source (SLEGS) using quasi-monoenergetic laser-Compton-scattering γ rays over the energy range from the neutron threshold to 14.61 MeV. The photon flux and energy distribution were determined with a LaBr 3 (Ce) spectrometer, and monoenergetic cross sections were obtained using an iterative unfolding method. Below 12 MeV, the present cross sections agree well with the NewSUBARU data and the IAEA-2019 evaluations. However, near the maximum of the (γ,n) excitation function, the present cross sections are significantly higher than both the NewSUBARU data and the IAEA-2019 evaluated values. The E1 γ-ray strength functions were derived by fitting the experimental cross sections measured at SLEGS and NewSUBARU. The stellar reaction rates for 169 Tm(γ,n) and 168 Tm(n,γ) were calculated by incorporating these constrained γ-ray strength functions into the TALYS code. The calculated 169 Tm(γ,n) rates were adopted in a full p-process reaction network for the shock-heated O/Ne-rich layers of a 20 M core-collapse supernova model to perform a sensitivity analysis. The updated rates have a negligible effect on the final p-nucleus abundances.

Transcript

Introduction to the show: ident: Nuclear Experiment. The day in nuclear experiment: beams, targets and what came out.

Kai: We're looking at the paper: "Measurement of the 169 Tm (gamma,n) 168 Tm Cross Section and Implications for gamma-Process Calculations".

Mira: Here's the gist of the paper. The 169Tm(γ, n) 168Tm cross section was measured at SLEGS with quasi-monoenergetic LCS γ-ray beams from 8.27 MeV to 14.61 MeV.

Kai: This measurement provides an independent benchmark for assessing the absolute normalization and energy dependence of the excitation function.

Mira: Measurement Methodology The experimental setup at SLEGS utilized laser-Compton-scattering γ rays to measure the 169Tm(γ, n) 168Tm cross section <ref:2611.12994#pg3>.

Kai: The photon flux and energy distribution were determined with a LaBr3(Ce) spectrometer, and monoenergetic cross sections were obtained using an iterative unfolding method.

Paper summary: Kai: So, we're looking at this paper, "Measurement of the one hundred sixty-nine Tm (gamma,n) one hundred sixty-eight Tm Cross Section and Implications for gamma-Process Calculations <ref:2611.12994#pg1,Cross Section and Implications for>." Essentially, they measured how often a gamma ray hits a one hundred sixty-nine thulium atom and knocks out a neutron to make one hundred sixty-eight thulium.

Mira: And the big deal here is that this measurement is supposed to be an independent benchmark for checking how accurately we know the absolute normalization and how the cross section changes with energy. It’s testing some fundamental physics assumptions in nuclear reaction calculations, which are used for things like gamma processes in stars <ref:2611.12994#pg2>.

Lev: For us on the ground, what they did was use quasi-monoenergetic laser Compton scattering gamma rays at SLEGS, covering an energy range from eight point two seven MeV up to fourteen point six one MeV <ref:2611.12994#pg1>. That whole setup is designed to get a clean energy distribution of those gamma rays.

Kai: Right, so they used this specific beam type to get these measurements, and the paper points out that they used an iterative unfolding method to turn the raw data into monoenergetic cross sections <ref:2611.12994#pg2>. I wonder how much correction those unfolding steps introduce because they said the unfolded cross sections are systematically higher near the threshold where the low-energy tail of that beam contributes a bigger correction <ref:2611.12994#pg3>.

Mira: That’s a key point, because if you don't account for that low-energy tail correctly, your resulting cross section will look wrong right near the threshold <ref:2611.12994#pg3>. The paper then joint fits this measurement data with existing NewSUBARU data to constrain the giant dipole resonance, which they found at an energy of one twenty point three MeV with a width of two point two MeV <ref:2611.12994#pg3>.

Lev: That constraint on the giant dipole resonance, that means they are using this measurement to pin down some fundamental properties of the nucleus itself, which is what we need for our models <ref:2611.12994#pg3>. But how does that input translate to a better nuclear model?

Kai: Well, they took that constrained giant dipole resonance strength function and used it as an input for their Hartree-Fock calculations in the TALYS two point zero code <ref:2611.12994#pg3>. They even derived a constraint on the E one strength function using this relation where the E one strength is roughly one over three pi squared times h bar squared times two c squared times sigma gamma n of energy times that gamma energy <ref:2611.12994#pg3>.

Mira: And what they found is that this derived E one strength function agrees with the NewSUBARU fit within about ten percent at the peak maxima <ref:2611.12994#pg3>. That agreement gives confidence in using their nuclear input for predicting stellar reaction rates <ref:2611.12994#pg3>.

Lev: For real hardware running error correction, that level of agreement with existing nuclear inputs is good because it suggests the input physics is sound for what we're trying to model <ref:2611.12994#pg3>. But let's talk about the application: they used these constrained strength functions to calculate stellar reaction rates for one hundred sixty nine thulium and one hundred sixty eight thulium <ref:2611.12994#pg3>.

Kai: And the result is that at temperatures around two point zero to three point five, the photodisintegration rate is about two times larger than the JINA REACLIB rate, with the only remaining uncertainty coming from the nuclear level density <ref:2611.12994#pg3>. That's a significant factor in how quickly these reactions happen in stellar environments.

Mira: So for someone just listening to this, what it means is that when we model core-collapse supernovae, specifically for the oxygen over neon shell of a twenty solar mass core-collapse supernova model, this revised rate has almost no effect on the final proton nucleus abundances <ref:2611.12994#pg3>. That suggests their work doesn't drastically change our predictions for what those stars end up making.

Lev: From an engineering standpoint, it means that if we were trying to run simulations on real hardware for these reactions, the overhead from using this revised rate would be negligible compared to the nuclear level density uncertainty <ref:2611.12994#pg3>. It's not a huge computational burden just because of the refinement.

Kai: To wrap up, in this paper "Measurement of the one hundred sixty-nine Tm (gamma,n) one hundred sixty-eight Tm Cross Section and Implications for gamma-Process Calculations," they used quasi-monoenergetic laser Compton scattering gamma rays from eight point two seven MeV to fourteen point six one MeV <ref:2611.12994#pg1>.

Mira: The main thesis is that this measurement provides a way to test the giant dipole resonance and constrain the E one strength function, which they found agrees with NewSUBARU data within about ten percent at its peak maxima <ref:2611.12994#pg3>.

Lev: And ultimately, the implication for stellar physics is that their revised reaction rates have a negligible effect on the final proton nucleus abundances in core-collapse supernova models <ref:2611.12994#pg3>.

Kai: So, to sum up, this paper shows how experimental measurements of photoneutron cross sections can be used to pin down nuclear structure inputs for stellar reaction rate calculations <ref:2611.12994#pg3>.

Mira: It’s a solid piece of experimental validation for the models used in gamma processes <ref:2611.12994#pg2>. The work really helps confirm the statistical models used in this region of the rare-earth elements <ref:2611.12994#pg3>.

Lev: We see how tying experimental data to theoretical inputs, like those Hartree-Fock calculations, gives you a much tighter picture of what's actually happening in the nucleus <ref:2611.12994#pg3>.

Kai: That’s it for this talk on the paper. It shows that precise measurements can give us reliable inputs for complex astrophysical calculations <ref:2611.12994#pg3>.

Conclusion: Kai: So, we're wrapping up this look at the paper, "Measurement of the one hundred sixty-nine Tm (gamma,n) one hundred sixty-eight Tm Cross Section and Implications for gamma-Process Calculations." Essentially, they measured how frequently a gamma ray hits one hundred sixty-nine thulium and knocks out a neutron to make one hundred sixty-eight thulium.

Mira: And the authors are using that measurement to test some fundamental assumptions in nuclear reaction calculations, which are used for modeling things like gamma processes in stars. It’s about checking if our basic nuclear inputs match what we see experimentally.

Lev: From an engineering standpoint, they took a measured quantity and tried to fit it into a larger model. That means they're testing the stability and accuracy of those models when you feed them real experimental data instead of just pure theory.

Kai: What’s interesting is how they use this cross section measurement to pin down the giant dipole resonance in that nucleus, which they found at about twelve point three MeV with a width of two point two MeV. That’s a specific piece of nuclear structure information they extracted from the data.

Mira: And that strength function they derived from the measurement agreed with other theoretical fits within about ten percent at the peak maxima. That level of agreement is what gives confidence to use that input for predicting stellar reaction rates in stars.

Lev: So, they used this constrained strength function to calculate how fast these reactions happen in stars, and the result shows that at temperatures between two point zero and three point five, the photodisintegration rate is about twice as fast as some other rates we usually look at.

Kai: The big picture here is that even though their revised rates are a bit higher, for the final proton abundances in a core-collapse supernova model, the effect on those abundances is pretty small. It means their experimental work confirms our general approach to these calculations without totally rewriting the stellar evolution models.

Mira: So, this paper shows how tying precise experimental data to theoretical inputs helps us get a tighter picture of what’s happening inside the nucleus. It gives us better numbers for predicting how gamma processes function in extreme astrophysical environments.

Lev: It confirms that even when you're dealing with complex nuclear physics and astrophysics, if your input constraints are solid, the resulting calculations remain stable enough to be used for modeling stellar outcomes.

Kai: Next time we talk about these types of reactions, we'll look at how those experimental setups actually handle the energy spread and what kind of noise that introduces.

More episodes

← Home