Black-hole formation and thermalization in open JT gravity

summary

The gist

Black-hole formation is expected to correspond to thermalization in the boundary theory, and this paper demonstrates the dynamical formation of black holes in open JT gravity coupled to a scalar…

In short

This work investigates how black holes form dynamically when open quantum systems interact with an external heat bath in open JT gravity. Using a non-Markovian extension of holographic dynamics, the study shows that loss of purity leads to horizon formation in the bulk, confirming that thermalization into a stationary black hole is a generic feature of such open systems.

Key concepts

Holographic Duality
This principle suggests that gravity in (d+1) dimensions can be described by a simpler field theory in d dimensions. In AdS/CFT, this means a black hole in the gravitational bulk corresponds to a thermal equilibrium state of the boundary field theory.
Open System Dynamics
When a quantum system is coupled to an external heat bath, it generally loses its purity as information leaks into the environment. The paper uses this open-system setup to model how this loss of purity can manifest as black hole formation in the dual gravitational description.
Non-Markovian Extension
The authors use a non-Markovian prescription for Lindblad dynamics, which accounts for memory effects in the bath. This is crucial because it allows the model to capture complex dissipation processes that lead to thermalization and black hole formation in this specific holographic setup.

Terminology used across episodes

This episode discusses

The paper

Black-hole formation and thermalization in open JT gravity · Read on arXiv

Ryo Adachi, Rumi Hasegawa, Takanori Ishii, Daichi Takeda

Kyoto University Department of Physics · Niigata University Graduate School of Science and Technology · RIKEN

Transcript

Introduction to the show: ident: High Energy Physics: Theory. The day in high-energy theory: gravity, strings, fields and the questions left open.

Kai: We're looking at the paper: "Black-hole formation and thermalization in open JT gravity".

Mira: Here's the gist of the paper. Black-hole formation is expected to correspond to thermalization in the boundary theory, and this paper demonstrates the dynamical formation of black holes in open JT gravity coupled to a scalar field using a non-Markovian extension of the holographic Lindblad prescription The holographic principle suggests that a gravitational theory in (d + 1) dimensions can be described by an equivalent d-dimensional field theory, such as the AdS/CFT correspondence In AdS/CFT, a stationary black hole corresponds to a thermal equilibrium state of the boundary theory When a boundary system is coupled to an external heat bath, an initially prepared pure state generally evolves into a mixed state due to information transfer to environmental degrees of freedom If the reduced boundary theory admits a semiclassical bulk description, this inaccessible information should be encoded behind a bulk horizon, leading to the expectation that horizon formation is a generic feature of open AdS/CFT Modeling Open Systems Dynamics The authors extend the holographic prescription for Lindblad dynamics to a non-Markovian setting by coupling a Gaussian bath initially in a thermal Gibbs state to JT gravity coupled to a scalar field The total action is defined as Itot = I

φ: + IB

ψ: + Z d dx g(x)O(x)ψ(x), where the bath is integrated out using a path integral that yields an expression involving colored noise In the high-temperature limit, the relation between the noise kernels implies that ν dominates over η, simplifying the dynamics Derivation of Semiclassical Equation of Motion The gravitational sector reduces to the Schwarzian action of the boundary embedding function t(u) in JT gravity when the dilaton is integrated out In the semiclassical regime, an integro-differential equation for t(u) is derived, which numerically shows that t(u) approaches a constant exponentially at late times, consistent with ordinary AdS2 black hole behavior The equation of motion is obtained from the saddle-point condition of the effective action, yielding an expression involving A(u, u') Numerical Verification of Black Hole Formation Numerical simulations were performed by solving the equation of motion (2.20) to test the expectation that black-hole formation occurs when the boundary system is open For pure JT gravity, the solution t(u) approaches a finite value at late times, which implies an event horizon forms in the bulk When coupled to a bath with specific spectral functions, black hole formation is observed even when the boundary operator is coupled to an external source The late-time behavior of log˙t(u) shows linear behavior, indicating that the stationary black hole of JT gravity is realized Discussion and Conclusion The results confirm the expectation that loss of purity in open-system dynamics provides a generic mechanism for horizon formation in the bulk The paper shows that fluctuations and dissipation balance each other without turning off the coupling to the heat bath, leading to thermalization into a stationary black hole having the same temperature as the bath It is noted that differences between isolated and open systems may emerge from summing over geometries with different topologies The work suggests that microscopic observables may be needed to distinguish black-hole formation in the open-system case from that in the closed-system case Appendix Details The derivation of the gravitational representation (2.5) from the partition function (2.2) involves introducing auxiliary fields and applying the GKPW relation to obtain a bulk path integral expression Integrating out the scalar field leads to an on-shell action Sm,eff that is proportional to ∆ − 1/2 The numerical method involves solving the reduced equation of motion using a Heun-type predictor-corrector method The convergence of the numerical results with respect to the step size is shown in Figure D.1 References

1: J.M.

Kai: Maldacena, The Large N limit of superconformal field theories and supergravity, Adv.

Mira: Theor.

Kai: Math.

Title and authors: Mira: The paper suggests a couple of improvements to the original approach. First, they look at how to design a heat bath that actually reproduces the thermal state, which is described by something like equation (three point five) > <ref:2605.14573#pg2>

Kai: That’s important because designing that bath correctly is crucial; if the bath isn't right, you won't get the right physical picture of thermalization >

Lev: From an error correction standpoint, getting that bath spectral function right means we need to consider the overhead associated with modeling that noise structure in a way that’s computationally feasible on real hardware >

Mira: They also explore integrating out the scalar field in equation (three point two), and they find that this leads to an on-shell action Sm,eff which is proportional to delta minus one/two > <ref:2605.14573#pg1>

Kai: That action term is a bit strange; it suggests that the scalar field integration simplifies things a lot when you’re looking at the semiclassical regime >

Lev: That simplification helps because it lets them derive the semiclassical equation of motion, but we still have to worry about how that numerical method converges with respect to the step size, which they show in Figure D.one > <ref:2605.14573#pg1>

Mira: So, while they simplify the action by integrating out the scalar field, the core challenge remains solving that resulting integro-differential equation for t(u) >

Kai: It's about how this structure helps us see why black hole formation is a generic feature in open quantum systems instead of just a special case >

Lev: The paper flags that the distinction between isolated and open systems might depend on summing over geometries with different topologies, which is something we’d have to account for if we wanted to make these results more robust >

The paper's summary: Kai: So, bringing it all together on "Black-hole formation and thermalization in open JT gravity," the main implication is that loss of purity in an open system provides a generic mechanism for horizon formation in the bulk geometry >

Mira: It confirms that when you have coupling to an external bath, fluctuations and dissipation balance each other out, leading to thermalization into a stationary black hole with the same temperature as that bath >

Lev: For hardware implementation, it means we need a model of the non-Markovian noise structure because running simulations on real systems will require solving that specific equation of motion numerically >

Kai: To wrap up this paper, remember "Black-hole formation and thermalization in open JT gravity" shows that we can get a dynamical black hole solution when the boundary system is open, driven by the environment >

Mira: It’s about how the dynamics of an open system leads to thermalization into a stationary black hole whose temperature matches the bath temperature >

Lev: And for hardware, it underscores that modeling this requires accounting for non-Markovian noise structures because you have to solve that specific equation of motion numerically >

Kai: That's what we got. We’ve seen how coupling to an environment can lead to a bulk black hole structure, even in these simple gravity models >

The paper's improvements: Kai: So, we just talked about how coupling to an external heat bath can make a black hole appear in open gravity systems, and now we’re looking at what they suggest to improve that idea >

Mira: Right, the authors are pointing out ways to actually make that thermalization happen correctly in the first place >

Lev: They're looking at how to design that noise bath so it actually matches the physical state we want, which is a big hurdle for any simulation setup on real hardware >

Kai: They mention using equation three point five again to design a better bath, and Mira, what’s the deal with that specific form they suggest? >

Mira: It’s about getting that spectral function right because if you don't get the noise structure correct, you won't get the right thermal state in the first place >

Lev: From my side of things, designing a bath means dealing with the overhead of modeling that noise structure; it has to be computationally feasible on real hardware, otherwise you’re just wasting cycles >

Kai: Okay, so they also looked at integrating out that scalar field again, and they found this on-shell action Sm eff which is proportional to delta minus one half. That looks like a big simplification >

Mira: That action term is interesting because it shows how the scalar field integration helps us get to the semiclassical equation of motion, but we still have to be careful about those assumptions underlying that simplification >

Lev: I agree, that simplification lets them derive the dynamics, but we still have to worry about how that resulting integro-differential equation behaves numerically when you try to run it on real hardware >

Kai: So what’s the main point of those suggested improvements then? Is it just cleaner math or something more physical? >

Mira: It’s about making sure the environment doesn't just trick us into thinking things are thermalized; we need to ensure that fluctuations and dissipation actually balance each other out correctly, without turning off the coupling to the heat bath >

Lev: That sounds like a hard constraint for any error-correction scheme; you can't just ignore the bath when you’re trying to stabilize a quantum system >

Kai: And they also talked about how this distinction between isolated and open systems might depend on summing over geometries with different topologies, which is something we need to keep in mind >

Mira: Exactly. If the geometry changes topology, that could mess up the picture of what we are actually observing, so it’s a caveat you can't ignore when interpreting these results >

Lev: So to summarize, the improvements push us toward a more physically accurate noise model and force us to handle topological variations in our bulk geometry calculations >

Kai: It means that while the idea of open systems creating black holes is compelling, we still have a lot of work left on making the modeling robust enough for actual hardware tests >

Conclusion: Kai: So we've covered how the paper "Black-hole formation and thermalization in open JT gravity" suggests that loss of purity in an open system causes a bulk black hole to form >

Mira: Exactly, it’s about showing that horizon formation isn't just for closed systems; it happens generically when you couple things to a heat bath >

Lev: The main thing I see is that they are pushing the modeling toward non-Markovian noise structures because if we don't get those right, the simulation on real hardware won't give us anything meaningful >

Kai: I mean, for someone building a quantum system, what does this mean for what we’re actually built and cooled? >

Mira: It means that to get a reliable thermal state in our physical experiments, we have to account for the specific way the noise is colored by the bath itself >

Lev: And that coloring comes with overhead; it means if you want to run this on actual hardware, you’re looking at a significant increase in complexity just to model that noise structure accurately >

Kai: Right, so we're talking about designing a system where the environment doesn't just sit there, but actively drives the formation of a black hole geometry >

Mira: That’s right. It changes how we think about thermalization—it’s not just a state you get into; it’s a dynamic process driven by entanglement with that bath >

Lev: For error correction, it means any scheme we build to stabilize our qubits has to be robust against this kind of environment-driven horizon formation >

Kai: It also shows us that the distinction between an isolated system and an open one might come down to summing over different bulk topologies, which is a bit abstract >

Mira: It is. The authors are hinting that maybe the final answer depends on how many different geometries you’re considering, so it’s not just one single picture >

Lev: I think what this points toward for future work is needing microscopic observables to actually tell the difference between those two cases, because the bulk geometry might look similar at a coarse level >

Kai: So we wrap up on "Black-hole formation and thermalization in open JT gravity" by saying that environmental coupling dynamically creates horizons that lead to thermal states >

Mira: It’s a solid piece of work because it connects the abstract idea of information loss with concrete gravitational features in the bulk spacetime >

Lev: And for us, it tells us what kind of noise we need to fight when trying to model these non-equilibrium dynamics on actual quantum computers >

More episodes

← Home