Phenomenology of heavy-flavour jet angularities at hadron colliders

summary

The gist

Phenomenology of heavy-flavour jet angularities at hadron colliders computes resummed and matched predictions for jet angularities in hadronic Z+jet events where the jet is initiated by a b-quark…

In short

This study computes predictions for jet angularities in hadronic Z+jet events initiated by a b-quark at hadron colliders. It uses NLL resummation matched to NLO accuracy, incorporating non-perturbative corrections via particle-level simulations. Results show that jet angularities are sensitive probes of heavy-quark mass effects and dead-cone suppression, confirming the presence of a peak in groomed jets.

Key concepts

Jet Angularities
These observables measure the angular and transverse momentum distribution of particles inside a jet using specific kinematic formulas. They are used to probe the internal structure and properties of jets, particularly how heavy quarks influence their shape.
NLL Resummation Matched to NLO
This is a theoretical technique where calculations involving large logarithms (like those from QCD) are resummed to all orders (Next-to-Leading Logarithmic accuracy) and then matched precisely to fixed-order calculations at Next-to-Leading Order. This ensures accurate predictions across different energy scales.
SoftDrop Grooming
This is a technique used to define 'groomed' jets by removing soft, wide radiation from the jet structure. It helps isolate specific substructures within the jet, which is crucial for resolving effects like the dead-cone effect and enhancing sensitivity to collinear emissions.
Heavy-Flavour Mass Effects
The mass of a heavy quark (like a b-quark) alters how jets are formed compared to light quarks. The paper shows that these mass effects are significant for smaller angular exponents and moderate transverse momenta, affecting the jet's distribution shape.

Terminology used across episodes

This episode discusses

The paper

Phenomenology of heavy-flavour jet angularities at hadron colliders · Read on arXiv

Technical University of Munich School of Natural Sciences Physics Department Institute für Theoretische Physik Georg-August-Universitét Göttingen

Transcript

Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.

Kai: We're looking at the paper: "Phenomenology of heavy-flavour jet angularities at hadron colliders".

Mira: Here's the gist of the paper. Phenomenology of heavy-flavour jet angularities at hadron colliders computes resummed and matched predictions for jet angularities in hadronic Z+jet events where the jet is initiated by a b-quark Observable Definition and Process Setup The study focuses on observables belonging to the family of jet angularities, which probe both the angular and transverse-momentum distribution of particles within a given jet These observables are defined by the formula involving particle kinematics.

Kai: The analysis considers jets produced in association with a Z-boson in proton–proton collisions, specifically comparing light-flavour jets to b-jets.

Mira: The process definition involves three hard-process configurations: heavy-flavour production, light-flavour production, and inclusive production.

Kai: Theoretical Framework for Resummation and Matching The theoretical framework employs NLL resummation matched to NLO accuracy using the Caesar formalism implemented in Sherpa The framework accounts for massive radiator legs by translating modifications from the massless case into the Caesar formalism.

Title and authors: Kai: So, to wrap up this piece on "Phenomenology of heavy-flavour jet angularities at hadron colliders": it really hammers home that jet shape measurements are sensitive indicators for heavy quark mass effects and dead-cone suppression <ref:2606.20798#pg1>.

Mira: Yeah, the main thing is that we can use these angularity probes to study how those heavy quark masses influence radiation, which is really important for our theory of QCD <ref:2606.20798#pg3>.

Lev: And then they show that for groomed jets, using SoftDrop, things get different because it closes up some phase space and creates a specific bump in the first bin that’s really telling about the underlying physics.

Kai: What this means for us is that we have a consistent way to study these heavy quark effects using jet substructure measurements, even when we have to worry about non-perturbative smearing.

Mira: It gives us a solid foundation for more detailed, flavor-tagged measurements where we can really see those mass effects clearly.

Lev: We also get confirmation that at high transverse momentum, heavy quark jets are pretty clean samples of quark jets, which simplifies the simulation setup in those high energy regions.

Kai: But they're still subleading in inclusive jet samples, so it doesn't drastically change how we describe the overall data right now.

Mira: The dependence on the angular exponent and transverse momentum is key; it tells us exactly where in our kinematic space we need to focus our attention for these mass effects.

Lev: So, if you're building real hardware, you have to account for that migration between parton and hadron levels when you use those transfer matrices they mentioned.

Kai: Right. And the comparison with the CMS data across all those angular exponents gives us confidence in the whole methodology used here <ref:2606.20798#pg3>.

Mira: This paper confirms that jet angularities are a probe for heavy quark mass effects and how dead-cone suppression works in radiation, which is fundamental to understanding these processes at colliders.

Lev: Moving forward, the next step would be pushing the accuracy of those resummation calculations even higher and looking at more complex final states like Z plus b bar b production <ref:2606.20798#pg1>.

The paper's summary: Kai: So, to recap this piece: this paper looks at how jet angularities are sensitive probes for heavy quark mass effects and dead-cone suppression of radiation in Z plus jet events.

Mira: Right, they're essentially showing that if you measure the shape of a jet, you can tell something about the heavy quark mass because it affects how those emissions look.

Lev: They also show that grooming techniques like SoftDrop are really important because they reveal a peak in the first bin for b-jets that exists right at the parton level <ref:2606.20798#pg3>.

Kai: What this means is that we need to be careful when we try to match these simulations to real hardware, because those non-perturbative effects smear things out a bit.

Mira: They suggest that for future work, the resummation needs to be even more accurate, maybe pushing it toward NLL prime accuracy for both ungroomed and groomed jets <ref:2606.20798#pg1>.

Lev: And they point out that extending this framework to more complex final states like Z plus b bar b production is the logical next thing to explore <ref:2606.20798#pg1>.

Kai: From an engineering standpoint, running those higher-order calculations on real hardware will definitely increase the computational overhead because we're dealing with these intricate matching procedures.

Mira: It sounds like the next big thing is using this consistent basis to do more differential or flavor-tagged measurements where these mass effects can be really isolated <ref:2606.20798#pg3>.

Mira: That’s right. The paper sets up a framework that works well for untagged jets, but it's the substructure analysis that really unlocks the physics of heavy quarks.

Lev: So we're looking at refining the theoretical tools to match those experimental observables more precisely, which is exactly what we need when you start building detectors sensitive to these subtle effects.

The paper's improvements: Lev: I just want to say that the consistency across different observables, whether you look at ungroomed or groomed jets, gives us a really robust tool for planning experimental setups <ref:2606.20798#pg3>.

Kai: It means we have this consistent basis for studying heavy-flavour jet substructure in more differential or flavor-tagged measurements <ref:2606.20798#pg3>.

Mira: And that's great because the comparison with CMS data shows good agreement across all those angular exponents alpha, which validates the approach we took here <ref:2606.20798#pg3>.

Lev: For me, it just confirms that the underlying physics we’re modeling is sound enough to be tested against real LHC data, even with these complex resummation techniques <ref:2606.20798#pg1>.

Kai: So, for now, this paper gives us a consistent basis for studying heavy-flavour jet substructure in more differential or flavor-tagged measurements <ref:2606.20798#pg3>. We’ve got a solid tool now for our analyses.

Conclusion: Kai: So we're wrapping up this piece on "Phenomenology of heavy-flavour jet angularities at hadron colliders." It really hammers home that measuring jet shapes is a sensitive indicator for heavy quark mass effects and dead-cone suppression <ref:2606.20798#pg1>.

Mira: Yeah, the main thing is that we can use these angularity probes to study how those heavy quark masses influence radiation, which is really important for our theory of QCD <ref:2606.20798#pg3>.

Lev: I just want to say that the consistency across different observables, whether you look at ungroomed or groomed jets, gives us a really robust tool for planning experimental setups <ref:2606.20798#pg3>.

Kai: It means we have this consistent basis for studying heavy-flavour jet substructure in more differential or flavor-tagged measurements <ref:2606.20798#pg3>.

Mira: And that's great because the comparison with CMS data shows good agreement across all those angular exponents alpha, which validates the approach we took here <ref:2606.20798#pg3>.

Lev: For me, it just confirms that the underlying physics we’re modeling is sound enough to be tested against real LHC data, even with these complex resummation techniques <ref:2606.20798#pg1>.

Kai: So, this paper confirms that jet angularities are sensitive probes for heavy-quark mass effects and dead-cone suppression of collinear radiation <ref:2606.20798#pg1>.

Mira: The finding about the peak structure in groomed jets is quite distinct from what we see in ungroomed samples <ref:2606.20798#pg3>.

Lev: I agree, the non-perturbative effects smear that contribution a bit, but those configurations remain where after SoftDrop grooming, the jet contains only the B hadron <ref:2606.20798#pg3>. That’s a concrete prediction we can test.

Kai: It's about how this separation between heavy- and light-flavor jets depends on both the angularity exponent alpha and the jet transverse momentum <ref:2606.20798#pg3>. We need to keep that dependence in mind for our future searches.

Mira: And remember, the mass effects are sizeable for smaller angular exponents and moderate transverse momenta, but they diminish at higher transverse momenta <ref:2606.20798#pg3>. That tells us where the most interesting physics lies kinematically.

Lev: We need to keep pushing the accuracy of those resummation calculations and looking at more complex final states like Z plus b bar b production for even better constraints <ref:2606.20798#pg1>. That's where we go next.

Kai: So, the overall implication is that this framework gives us a consistent way to study heavy-flavour jet substructure in more differential or flavor-tagged measurements <ref:2606.20798#pg3>. We’ve got a solid tool now for our analyses.

Mira: It's a good foundation, and the comparison with CMS data indicates heavy-flavour contributions remain subleading in inclusive jet samples and therefore do not significantly modify the overall description of the data <ref:2606.20798#pg3>. That’s a pragmatic starting point for our next steps.

Lev: I just want to say that this framework developed here provides a consistent basis for studying heavy-flavour jet substructure in more differential or flavor-tagged measurements <ref:2606.20798#pg3>. That consistency is what we need for robust experimental planning.

More episodes

← Home