Higgs production from anomalous gluon dynamics
summary
The gist
Higgs production from anomalous gluon dynamics presents a two-loop analysis of contributions to Higgs production via gluon-gluon fusion arising from the triple-gluon operator in SMEFT The study…
In short
This study analyzed Higgs production via gluon-gluon fusion considering anomalous gluon dynamics within SMEFT at two loops. It shows how mixing between operators like QG and QHG leads to renormalization scale independence, requiring complex RG evolution. The analysis yields a constraint on the high-scale Wilson coefficient CG, providing a reliable EFT validity check.
Key concepts
- SMEFT Lagrangian
- This is the framework used to describe physics beyond the Standard Model by adding higher-dimension operators to the Standard Model Lagrangian. The specific terms studied here involve operators like QG and QHG, which represent potential new interactions between gluons and Higgs bosons.
- Renormalization Group (RG) Evolution
- RG evolution describes how the physical parameters of a theory change as the energy scale at which you measure them changes. In this paper, it dictates how the Wilson coefficients of different operators mix and run with energy, ensuring that predictions remain independent of the arbitrary scale chosen for calculations.
- Operator Mixing
- This refers to the process where one type of interaction operator (like QG) transforms into another type (like QtG or QHG) at higher orders in perturbation theory. This mixing is crucial because it drives the running of the coefficients and determines how different SMEFT effects contribute to a final physical observable.
- Form Factor FG
- The form factor FG represents the correction to the Higgs production cross-section due to virtual corrections from new physics. The paper shows that for this specific process, only virtual corrections contribute to the form factor, and real emissions do not affect it.
Terminology used across episodes
This episode discusses
- Higgs production from anomalous gluon dynamics · Paper Radio
- Dimension-Six Terms in the Standard Model Lagrangian
- The Standard Model as an Effective Field Theory
- The Standard Model effective field theory at work
- Automated one-loop computations in the SMEFT
- Renormalization Group Evolution of the Standard Model Dimension Six Operators I: Formalism and lambda Dependence
- Renormalization Group Evolution of the Standard Model Dimension Six Operators II: Yukawa Dependence
- Renormalization Group Evolution of the Standard Model Dimension Six Operators III: Gauge Coupling Dependence and Phenomenology
- NNLO event generation for production in the SM effective field theory
- On gamma 5 schemes and the interplay of SMEFT operators in the Higgs-gluon coupling
- SMEFT at NNLO + PS: Vh production
- Combining chromomagnetic and four-fermion operators with leading SMEFT operators for gg to hh at NLO QCD
- Two-loop running effects in Higgs physics in Standard Model Effective Field Theory
- Two-Loop Running in the Bosonic SMEFT Using Functional Methods
- Precision tests of third-generation four-quark operators: one- and two-loop matching
- WH production at the LHC within SMEFT at next-to-next-to-leading order QCD
- The Dimension Six Triple Gluon Operator in Higgs+Jet Observables
- LHC multijet events as a probe for anomalous dimension-six gluon interactions
- Constraining anomalous gluon self-interactions at the LHC: a reappraisal
- LHC dijet angular distributions as a probe for the dimension-six triple gluon vertex
- Towards constraining triple gluon operators through tops
The paper
Higgs production from anomalous gluon dynamics · Read on arXiv
Max Planck Institute for Physics
We present a two-loop analysis of the contributions to Higgs production via gluon-gluon fusion arising from the triple-gluon operator in the Standard Model effective field theory (SMEFT). Our discussion covers all aspects of renormalization group (RG) improved perturbation theory, including matching and running within the SMEFT. This study can therefore be seen as a blueprint of the intricacies and subtleties that arise in RG improved SMEFT calculations for collider processes beyond the leading order.
Transcript
Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Higgs production from anomalous gluon dynamics".
Mira: Here's the gist of the paper. Higgs production from anomalous gluon dynamics presents a two-loop analysis of contributions to Higgs production via gluon-gluon fusion arising from the triple-gluon operator in SMEFT The study illustrates the full complexity of RG improved perturbation theory beyond one-loop level in SMEFT through an instructive example involving anomalous gluon dynamics Framework and Operators The framework defines the SMEFT Lagrangian as LSMEFT = X i Ci(µ)Qi.
Kai: The relevant dimension-six operators considered include QG = f abcG a,ν µ G b,ρ ν G c,µ ρ, QtG = ¯qσµνH T e a tGa µν, and QHG = H†H Ga µνG a,µν.
Mira: The initial conditions for the Wilson coefficients at the high-energy scale Λ are set such that CG(Λ) ≫ CtG(Λ) ≫ CHG(Λ) ≃ 0.
Kai: Calculation and Renormalization The calculation uses dimensional regularization in d = 4 − 2ϵ to regulate singularities The bare amplitude contains both 1/ϵ2 and 1/ϵ poles, which are of UV origin and have no IR contributions To achieve a UV-finite result, one must account for the fact that QG mixes into the chromomagnetic top-quark dipole operator QtG at one loop, which in turn mixes into the Higgs-gluon operator QHG at the same order The remaining 1/ϵ pole determines the two-loop anomalous dimensions that govern the mixing of QG into QHG RG Evolution and Scale Independence The RG evolution is dictated by beta functions, where the one-loop beta function for G is β(1)G = 15g 2s CG, and for CHG is β(1)HG = - 14g 2s + 6y 2t CHG − 4gsytCtG The single logarithm in the evolution of CG results from the one-loop self-mixing of QG The double logarithm in the running of CHG stems from a two-step mixing process, namely QG mixes into QtG at one loop, which subsequently mixes into QHG at the same perturbative order By inserting logarithmic expressions for the ratios of Wilson coefficients into (5.3), it is a matter of simple algebra to demonstrate that the two-loop SMEFT corrections to the gg → h form factor become renormalization scale independent at O(gsy 2t) Phenomenological Implications The modification of the signal strength relative to the SM is given by δµgg = 2δκg = 2Re G(1)G(2)∗ / G(1) squared Utilizing LHC measurements, a bound on the high-scale Wilson coefficient CG is derived as
−2.08, 0.39: TeV squared based on the 68% confidence level constraint This limit is more reliable than those obtained from multijet production because it probes linear corrections at virtualities well below the UV cut-off The study demonstrates that achieving a renormalization scale independent result for the gg → h production cross section at next-to-leading order in SMEFT requires accounting for three types of contributions The findings show that dominant RG effects arise from operator mixings proportional to powers of the strong coupling constant or the top-quark Yukawa coupling, along with the RG evolution of these parameters The derived bound on CG is weaker than existing constraints from multijet production but is considered more reliable for EFT validity The compact analytical and numerical expressions presented should prove useful in this context A Real radiation The calculation of the form factor FG receives contributions exclusively from virtual corrections, while real emissions linked to the triple-gluon operator QG do not contribute The sum of the two-loop Feynman diagrams represents the full bare IR-finite contribution to the gg → h amplitude The form factor FG in (5.4) receives contributions exclusively from virtual corrections, while real emissions linked to the triple-gluon operator QG do not contribute B Matching procedure The one-loop matching equation reads K(1) = A(1) − Z(1,tG,HG)ϵ.
Title and authors: Kai: The paper is titled "Higgs production from anomalous gluon dynamics," and it’s written by Ulrich Haischa from the Max Planck Institute for Physics in Germany.
Mira: It’s a very focused piece of work, tackling how the triple-gluon operator affects Higgs production via gluon-gluon fusion within SMEFT.
Lev: The authors are setting up a specific calculation path to see how these higher-order effects behave when you run the theory using renormalization group evolution.
Kai: Essentially, they are showing that this contribution comes from matching and running effects at different perturbative orders, which is a key subtlety in these calculations.
Mira: They use this example to illustrate the full complexity of RG improved perturbation theory in SMEFT, which is important since one-loop results are already quite common.
Lev: I wonder if they've fully accounted for all the mixing effects between operators at this two-loop level, because that’s usually where things get messy on real hardware.
The paper's summary: Kai: The summary explains that assuming the triple-gluon operator is the dominant ultraviolet deformation, you modify the gluon-gluon fusion cross section first at the two-loop level.
Mira: These corrections arise from three distinct types of contributions, involving matching and running effects at different perturbative orders.
Lev: So, instead of just looking at one correction term, they are tracking how different parts of the theory mix as you go to higher orders in perturbation theory.
Kai: The paper states that the unphysical dependence on the renormalization scale cancels order by order in perturbation theory only when these corrections are properly combined.
Mira: And they suggest that using the relevant SMEFT RG equations lets you resum those large logarithms that appear in the gluon-gluon fusion prediction, going beyond leading logarithmic accuracy.
Lev: Resumming those logarithms is a big deal because it helps keep the calculation stable when you try to get more precise predictions for things like Higgs production.
The paper's improvements: Kai: The paper points out that the main benefit of this approach is that it allows you to resum large logarithms in the gluon-gluon fusion prediction, going beyond just leading logarithmic accuracy.
Mira: They show that by using those SMEFT RG equations, you can resum those logarithms systematically.
Lev: That systematic handling of the running effects is crucial because it means we can get a more stable result when comparing theory to actual experimental measurements at the LHC.
Kai: They also emphasize that another reason for considering this triple-gluon operator contribution is that its Wilson coefficient remains relatively weakly constrained by jet observables and top-quark processes.
Mira: They point out that the strongest constraints on this operator come from multijet production, which relies on the strong enhancement of quadratic terms.
Lev: So, while this paper focuses on Higgs production, it highlights that other channels are where we usually get stronger limits on these operators.
Conclusion: Kai: To wrap up, the study shows that achieving a renormalization scale independent result for the gluon-gluon fusion cross section at next-to-leading order in SMEFT requires accounting for three types of contributions involving matching and running effects at different orders.
Mira: The paper concludes that dominant RG effects usually come from operator mixings proportional to powers of the strong coupling constant or the top-quark Yukawa coupling, along with the RG evolution of those parameters.
Lev: What I take away is that these dominant RG effects are tied to how strongly the coupling constants and Yukawa couplings run with energy, which is what we need to track for precision.
Kai: The derived bound on the Wilson coefficient CG from this analysis is between negative two point zero eight and positive three point nine TeV squared at a sixty-eight percent confidence level based on LHC measurements.
Mira: That limit is weaker than some constraints we get from multijet production, but the authors say it’s considered more reliable for EFT validity because it probes linear corrections at virtualities well below the ultraviolet cut-off.
Lev: I agree that probing those lower virtualities gives it a certain kind of reliability, but we still need to be careful about how much we trust these bounds when scaling up to higher orders.
Kai: So, in short, this paper provides a compact analytical and numerical expression that should be useful for anyone doing two-loop SMEFT calculations involving anomalous gluon dynamics.
More episodes
- 2610.38463-Gauge-parameter cancellation and finite form factors in one-loop quark scattering in the refined Gribov-Zwanziger framework
- 2610.37198-Searches for new particle physics by methods of classical and neutrino astronomy
- 2511.15779-SURFing to the Fundamental Limit of Jet Tagging
- 2505.01492-Photo- and Hadrodisintegration constraints on massive relics decaying into neutrinos
- 2505.20389-Dispersion relation of the neutrino plasma: Unifying fast, slow, and collisional instabilities
- 2511.10731-Keeping It Renormalizable: Minimal Baryogenesis induced Asymmetric Dark Matter
- 2404.04021-Vacuum correlations of the stress-energy-momentum tensor with constituent quarks
- 2503.02931-Relativistic Navier-Stokes description of the quark-gluon plasma radial flow
- 2606.06105-Bulk viscosity of a binary mixture: the role of the intra-species interaction
- 2607.03343-First look at the evaluation of two-loop Feynman integrals for radiative return processes