A global analysis of B to DP and B to D P decays
summary
The gist
A global analysis of B to DP and B to D P decays reveals that while exact SU(3)F symmetry leads to a significant disagreement with Standard Model predictions…
In short
The study analyzed B to DP and B to D Pbar decays using flavor SU(3) symmetry. Exact symmetry failed significantly against experimental data, requiring corrections. Including about 20% SU(3)F breaking resolved the discrepancy for B to DP decays alone, while a larger 60% breaking was needed for the combined analysis including CP asymmetries.
Key concepts
- SU(3)F Symmetry
- This is a theoretical assumption that flavor symmetry exists between different quark generations (up, down, strange). In this context, it simplifies the description of B meson decays by assuming certain relationships between decay amplitudes are fixed. When exact SU(3)F is assumed, it severely disagrees with measured experimental results.
- SU(3)F-breaking corrections
- These are small deviations from the perfect SU(3) symmetry assumption. The analysis introduces these corrections to account for the differences observed in real-world decays. By including these effects, the theoretical predictions can be made to match the experimental data much more closely.
- Branching Ratios
- Branching ratios are a measure of how often a specific decay channel occurs compared to all possible decays of a B meson. The analysis uses these measured values as key observables. They are calculated by multiplying the absolute value squared of the decay amplitude by some normalization factor.
- Direct CP Asymmetry (ACP)
- This observable measures the difference in decay rates between a particle and its antiparticle, normalized by their total rates. A non-zero ACP indicates that there are different weak and strong phases involved in the decay process, which is necessary for this asymmetry to occur.
Terminology used across episodes
This episode discusses
- A global analysis of B to DP and B to D P decays · Paper Radio
- Anomalies in Hadronic B Decays
- Anomalies in Hadronic B Decays: an Update
- Reappraisal of SU(3)-flavor breaking in B to DP
- Broken SU(3) Symmetry in Two-Body B Decays
- Decays of B Mesons to Two Light Pseudoscalars
- ELECTROWEAK PENGUINS AND TWO-BODY B DECAYS
- Using B 0 s to D s minus or plus K plus or minus Decays as a Portal to New Physics
- Enhanced CP Violation with B to K D 0 (D 0) Modes and Extraction of the CKM Angle gamma
- New Strategies to Obtain Insights into CP Violation Through B s to D s plus or minusK minus or plus, D s plus or minusK minus or plus,... and B d to D plus or minus pi minus or plus, D plus or minus pi minus or plus,... Decays
- New, Efficient and Clean Strategies to Explore CP Violation Through Neutral B Decays
- Exploring CP Violation with B d -> D K s Decays
- Getting beta-alpha without penguins
- A Closer Look at B d,s to D f r Decays and Novel Avenues to Determine gamma
- Exploring B s to D s(*) plus or minus K minus or plus Decays in the Presence of a Sizable Width Difference delta gamma s
- Averages of b-hadron, c-hadron, and tau-lepton properties as of 2021
- Averages of b-hadron, c-hadron, and tau-lepton properties as of 2018
The paper
A global analysis of B to DP and B to D P decays · Read on arXiv
Department of Natural Sciences, Lawrence Technological University · Physique des Particules, Université de Montrບl
Transcript
Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.
Kai: We're looking at the paper: "A global analysis of B to DP and B to D P decays".
Mira: Here's the gist of the paper. A global analysis of B to DP and B to D P decays reveals that while exact SU(3)F symmetry leads to a significant disagreement with Standard Model predictions, this discrepancy can be resolved by including approximately 20% SU(3)F breaking effects in the analysis Pruning redundant reasoning tokens The paper investigates the decay amplitudes for B¯ → DP and B¯ → DP¯ decays under the assumption of flavor SU(3) symmetry
SU(3)F: and includes SU(3)F-breaking corrections The authors find that a fit to the 15 measured branching ratios of B¯ → DP decays shows a > 5σ disagreement with the SMSU(3)F limit, which can be removed by adding ∼ 20% SU(3)F-breaking effects Furthermore, a combined fit of B¯ → DP and B¯ → DP¯ decays again finds a > 5σ disagreement with the SMSU(3)F limit, which is explained by including ∼ 60% SU(3)F-breaking effects.
Kai: Formalism of Amplitudes The analysis employs reduced matrix elements (RMEs) and topological diagrams to describe the decay amplitudes in both the SU(3)F limit and with SU(3)F-breaking corrections In the SU(3)F limit, B¯ → DP decays involve three RMEs: O15¯, O6, and O¯3 For B¯ → DP¯ decays, four RMEs appear: S15, S3, Tbar6, and T3.
Mira: SU(3)F-breaking corrections are introduced via the spurion field Qbrk = uu¯ + d¯d − 2ss¯ This leads to a set of 9 SU(3)F-breaking RMEs for B¯ → DP and 13 for B¯ → DPbar decays.
Kai: Observable Analysis The observables used in the analysis include branching ratios, defined as B(B¯ → f) = Af 2Φ, and direct CP asymmetries (ACP), defined as ACP ≡ Γ(B¯ → f) − Γ(B → ¯f) / Γ(B¯ → f) + Γ(B → ¯f) Direct CP asymmetry can only be generated if the decay B¯ → f involves at least two contributing amplitudes with nonzero relative weak and strong phases, which is not the case for all B¯ → DP decays.
Paper summary: Kai: So, wrapping up this paper "A global analysis of B to DP and B to D P decays," it seems the main message is that exact flavor SU(three) symmetry fails when you look at these decays in the Standard Model <ref:2610.20611#pg1,A global analysis of B>.
Mira: Exactly. The authors show that while a small amount of breaking, about twenty percent, can fix the individual B to DP fits, combining all the data requires more, suggesting up to sixty percent breaking might be necessary <ref:2610.20611#pg3>.
Lev: From an engineering standpoint, it means that if we were trying to build a detector or a machine that measures these decays and wants it to match reality, we can't rely on the simplest SU(three) symmetry assumption alone; we need to account for those breaking terms <ref:2610.20611#pg1>.
Kai: Right. And the title itself sets up this analysis—it’s not just about B to DP decays in isolation, but looking globally at both B to DP and B to D P bars <ref:2610.20611#pg1>.
Mira: It points out that these amplitudes can actually interfere with each other when you look at direct and indirect CP asymmetries, which is why they include all those observables in their combined fit <ref:2610.20611#pg3>.
Lev: It tells us that the Standard Model isn't perfectly capturing the dynamics here, and those SU(three)F breaking terms are what bridge the gap between theory and measurement <ref:2610.20611#pg1>.
Kai: So, this paper suggests that to understand these B decays fully, we can’t just stick to perfect symmetry; we have to include that significant breaking effect in our models <ref:2610.20611#pg3>.
Conclusion: Kai: So, this paper, "A global analysis of B to DP and B to D P decays," it looks at how we measure these B meson decays using flavor SU(three) symmetry and what that actually tells us about the Standard Model.
Mira: It’s not just one kind of decay they’re looking at; they're combining both the B to D P and the B to D P bar decays, which is important because it lets them test things more robustly.
Lev: From my side, it means we can’t treat these measurements in isolation anymore. If you only look at one set of data, you’re missing a lot of context about how the decay amplitudes behave overall.
Kai: Exactly. The authors found that to get a good fit to all those measured branching ratios and CP asymmetries, exact flavor SU(three) symmetry just doesn't work on its own in this Standard Model setup.
Mira: They show that you need about twenty percent of SU(three) breaking effects just for the B to D P decays by themselves.
Lev: But when they combine all twenty-five observables, including both the B to D P and B to D P bar channels, that number jumps up significantly. They found you might need sixty percent breaking effects just to get a good fit across the board.
Kai: So what does that actually mean for us? It suggests that if we want our models of these decays to match reality, we have to include those SU(three) breaking terms in our calculations, not just ignore them.
Mira: It’s a big signal because it points toward where the Standard Model might be missing some pieces in how these particles interact.
Lev: For the hardware side, that means any real experiment trying to measure this needs to be very careful about those breaking effects; you can't just assume perfect symmetry in your error calculations.
Kai: And this leads us right into how they actually calculated those amplitudes and what those specific breaking terms are that are causing all this trouble.
More episodes
- 2610.38463-Gauge-parameter cancellation and finite form factors in one-loop quark scattering in the refined Gribov-Zwanziger framework
- 2610.37198-Searches for new particle physics by methods of classical and neutrino astronomy
- 2511.15779-SURFing to the Fundamental Limit of Jet Tagging
- 2505.01492-Photo- and Hadrodisintegration constraints on massive relics decaying into neutrinos
- 2505.20389-Dispersion relation of the neutrino plasma: Unifying fast, slow, and collisional instabilities
- 2511.10731-Keeping It Renormalizable: Minimal Baryogenesis induced Asymmetric Dark Matter
- 2404.04021-Vacuum correlations of the stress-energy-momentum tensor with constituent quarks
- 2503.02931-Relativistic Navier-Stokes description of the quark-gluon plasma radial flow
- 2606.06105-Bulk viscosity of a binary mixture: the role of the intra-species interaction
- 2607.03343-First look at the evaluation of two-loop Feynman integrals for radiative return processes