Stringent limits on C!PT - and Lorentz-invariance violation from B s 0 meson decays
summary
The gist
Tests of fundamental symmetries, such as CP T and Lorentz invariance, provide sensitive probes of physics beyond the standard quantum-field-theory framework <ref:2609.02475#pg2> The results represent…
In short
This study tested fundamental symmetries like CP and Lorentz invariance using B0s meson decays. The analysis found precise constraints on CP T violation in the B-s system, yielding Re(z) = 0.018 ± 0.016 ± 0.03 and Im(z) = 0.03 ± 2, consistent with CP symmetry and showing no evidence for Lorentz-invariance violation.
Key concepts
- CP T Violation Parameter (Re(z))
- This parameter measures the violation of Charge-Parity and Time-reversal symmetries in B0s decays. A non-zero real part, Re(z), suggests physics beyond the Standard Model, as it would introduce a term dependent on the decay time distribution.
- Lorentz Invariance Violation (SME)
- The Standard Model Extension (SME) framework allows physicists to parameterize potential violations of Lorentz invariance. The real part of z is expressed in terms of SME coefficients ($\Delta m_s$, $\Delta \Gamma_s^2$, etc.), which describe how matter fields interact with fixed background tensors.
- B0s System Probe
- The B0s meson decay-time distribution is sensitive to Re(z) through a sinh term and Im(z) through a sin term. Because the B0s system has a significant decay-width difference, it serves as an important complementary probe for searching for CP T violation.
- Sidereal Modulation
- Lorentz and CP T violating effects can induce periodic variations in experimental observables over time, known as sidereal modulations. The analysis searched for these modulations across 24 sidereal-phase intervals to test the SME framework.
Terminology used across episodes
This episode discusses
- Stringent limits on C!PT - and Lorentz-invariance violation from B s 0 meson decays · Paper Radio
- CPT Violation Implies Violation of Lorentz Invariance
- CPT, Strings, and Meson Factories
- Theoretical and Phenomenological Aspects of CPT Violation
- Sensitivity of CPT Tests with Neutral Mesons
- Tests of Lorentz invariance: a 2013 update
- CPT Violation and the Standard Model
- Lorentz-Violating Extension of the Standard Model
- Gravity, Lorentz Violation, and the Standard Model
- Casimir effect in a Lorentz-violating tensor extension of a scalar field theory
- Limits on the Decay-Rate Difference of Neutral-B Mesons and on CP, T, and CPT Violation in B0-antiB0 Oscillations
- Averages of b-hadron, c-hadron, and tau-lepton properties as of 2023
- CPT, T, and Lorentz Violation in Neutral-Meson Oscillations
- Search for violations of Lorentz invariance and CPT symmetry in B 0(s) mixing
- Search for Time-Dependent CPT Violation in Hadronic and Semileptonic B Decays
- Studies of B0-B0bar Mixing Properties with Inclusive Dilepton Events
- Search for CPT and Lorentz Violation in B0-B0bar Oscillations with Dilepton Events
- Test of CPT and Lorentz symmetry in entangled neutral kaons with the KLOE experiment
- Charm System Tests of CPT and Lorentz Invariance with FOCUS
- CPT violation and B-meson oscillations
- Status and prospects for CPT and Lorentz invariance violation searches in neutral meson mixing
The paper
Stringent limits on C!PT - and Lorentz-invariance violation from B s 0 meson decays · Read on arXiv
LHCb collaboration
European Organization for Nuclear Research (CERN)
Tests of fundamental symmetries, such as C!PT and Lorentz invariance, provide sensitive probes of physics beyond the standard quantum-field-theory framework. Possible violations of these symmetries are investigated through interference effects in decays of B s 0 mesons to D s-π+ states. The analysis uses proton-proton collision data collected with the LHCb detector in 2015-2018 at a centre-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 6 fb-1. The results are interpreted within the Standard Model Extension framework, yielding sensitivities to the Lorentz-violating parameter Δa μ at the O (10-14), GeV level. Without assuming Lorentz-invariance violation, the C!PT-violating parameter z in the B s 0 system is measured to be Re(z) = 0.018 plus or minus 0.016 plus or minus 0.003 and Im(z) = 0.003 plus or minus 0.004 plus or minus 0.002, where the first uncertainties are statistical and the second systematic. These results represent the most precise constraints on C!PT violation in the B s 0 system.
Transcript
Introduction to the show: ident: High Energy Physics: Experiment. The day in high-energy experiment: detectors, searches and limits.
Kai: We're looking at the paper: "Stringent limits on C!PT - and Lorentz-invariance violation from B s 0 meson decays".
Mira: Here's the gist of the paper. Tests of fundamental symmetries, such as CP T and Lorentz invariance, provide sensitive probes of physics beyond the standard quantum-field-theory framework <ref:2609.02475#pg2> The results represent the most precise constraints on CP T violation in the B0s system <ref:2609.02475#pg9>.
Kai: CP T Violation Measurement The analysis measured the CP T-violating parameter z in the B0s system without assuming Lorentz-invariance violation, finding Re(z) = 0.018 ± 0.016 ± 0.003 and Im(z) = 0.003 ± 0.04 ± 2 The results represent the most precise constraints on CP T violation in the B-s system.
Mira: A nonzero Re(z) introduces a sinh(∆Γst/2) term into the decay-time distribution, while a nonzero Im(z) introduces a sin(∆mst) term <ref:2609.02475#pg4> The B0s system therefore provides an important complementary probe, as its sizeable decay-width difference gives access to Re(z).
Kai: Lorentz Invariance Violation Search The analysis investigated potential Lorentz- and CP T-violating effects within the Standard Model Extension (SME) framework <ref:2609.02475#pg4> Potential Lorentz- and CP T-violating effects are parameterized as couplings between conventional matter fields and fixed background tensors in the SME.
Title and authors: Lev: Now, let's talk about what the authors suggest they did to improve the analysis or what they found that was important, based on their work in "Stringent limits on C!PT - and Lorentz-invariance violation from B s zero meson decays" one <ref:2609.02475#pg1,and Lorentz-invariance violation from>.
Kai: They focused a lot on how they handled systematic uncertainties. They mentioned that these uncertainties come from assumptions about signal and background models and from fixed fit parameters ten <ref:2609.02475#pg1>. The authors tackled this by using a decay-time probability density function that’s modified to account for detector-related effects, like the decay-time-dependent reconstruction efficiency, finite decay-time resolution, and possible biases five <ref:2609.02475#pg2>.
Mira: And they improved the modeling of that efficiency function specifically by training an AI to model it using cubic B spline segments. This is crucial because that correction is essential for accurately measuring those CP T and Lorentz invariance violating parameters in B zero s to D minus s pi plus decays five <ref:2609.02475#pg2>.
Lev: The fitting procedure itself was also robust. They used a simultaneous fit over all reconstructed D minus s final states and three data-taking periods, while constraining the decay-time resolution and mistag probability calibrations to match that specific period for each fit six <ref:2609.02475#pg1>. This kind of careful handling of the data is important when you're trying to constrain parameters like Delta a mu one <ref:2609.02475#pg1>.
Kai: So, the improvements are really about making sure that when they extract Re(z) or Im(z), those numbers aren't just noise from our detector setup. They’re refining the way we model the physics happening in the detector itself five <ref:2609.02475#pg2>.
Mira: And by doing this, they manage to show that their results for Re(z) and Im(z) are consistent with CP T symmetry, while simultaneously showing no evidence for Lorentz invariance violation in Delta a mu one <ref:2609.02475#pg1>. It’s a tight result because of how carefully they handled those systematic uncertainties.
The paper's summary: Kai: So, to wrap up this discussion on "Stringent limits on C!PT - and Lorentz-invariance violation from B s zero meson decays", the main point is that even in these high-precision measurements, we are finding Re(z) consistent with zero one <ref:2609.02475#pg1,and Lorentz-invariance violation from>.
Mira: They’ve provided some of the most precise constraints yet on CP T violation in the B s system, and they’ve shown that their results for Re(z) and Im(z) agree with CP T symmetry nine <ref:2609.02475#pg2>.
Lev: From an error-correction standpoint, it means that if we were building hardware to measure these effects, we’d need extremely high fidelity because the Standard Model is holding up as expected here one <ref:2609.02475#pg1>. But the limits they put on Lorentz invariance violation are still very tight, constraining those parameters down to the O(ten minus fourteen GeV level
one: <ref:2609.02475#pg1>.
Kai: It’s a good result because it means that we haven't seen any major unexpected CP T or Lorentz invariance violation in this specific system yet, which is important for our search for new physics. We need to keep pushing these measurements.
Mira: Agreed. The paper provides the most stringent constraints on both CP T and Lorentz invariance violation in the B zero s system nine <ref:2609.02475#pg2>. It’s a solid piece of work that tightens the bounds on what we expect from nature at these scales one <ref:2609.02475#pg1>.
Lev: Yeah, I think they proved that their approach works to constrain these symmetries effectively against the noise we have in real hardware setups.
The paper's improvements: Kai: So, we're looking at how they actually made their measurement better in this paper "Stringent limits on C!PT - and Lorentz-invariance violation from B s zero meson decays" <ref:2609.02475#pg1>.
Mira: They tackled the issue of systematic uncertainties by focusing on how the detector messes with the decay time measurement five <ref:2609.02475#pg1>.
Lev: Specifically, they used a decay-time probability density function that accounts for things like reconstruction efficiency and finite resolution, which is pretty crucial for getting those parameters right six.
Kai: And to model that efficiency function better, they used an AI trained on cubic B spline segments five <ref:2609.02475#pg2>.
Mira: That helps them accurately extract the CP T and Lorentz invariance violating parameters in those B zero s to D minus s pi plus decays five.
Lev: The fitting procedure itself was also pretty robust, they did a simultaneous fit over all reconstructed D minus s final states and three data-taking periods six <ref:2609.02475#pg1>.
Kai: They constrained the decay-time resolution and mistag probability calibrations to match that specific period for each fit one.
Mira: It’s all about making sure those Re(z) and Im(z) numbers aren't just noise from the detector setup five.
Lev: It’s about refining how we model the physics happening in the detector itself, which is what they were doing with that AI training five.
Kai: And by doing this, they managed to show that their results for Re(z) and Im(z) are consistent with CP T symmetry one.
Mira: They also showed no evidence for Lorentz invariance violation in Delta a mu one. That’s a very tight result because of how carefully they handled those systematic uncertainties.
Lev: So, the improvement here is showing that this rigorous handling of detector effects actually lets them reach those tight constraints on CP T and Lorentz invariance violation in the B zero s system nine <ref:2609.02475#pg1>.
Conclusion: Kai: So, to wrap up this discussion on "Stringent limits on C!PT - and Lorentz-invariance violation from B s zero meson decays" <ref:2609.02475#pg1>. The main point is that they measured Re(z) equals zero point one eight plus or minus zero point one six plus or minus zero point zero three.
Mira: That number shows that for this specific system, CP T symmetry holds up really well under the conditions they measured it nine <ref:2609.02475#pg2>.
Lev: But even though Re(z) is near zero, they set some really tight limits on Lorentz invariance violation by looking at how those decays change over time one.
Kai: They’re saying that if there is new physics breaking these symmetries, it has to be hidden in a very subtle way because the Standard Model isn't predicting anything significant here six to eight <ref:2609.02475#pg2>.
Mira: This paper really provides some of the tightest constraints we have on CP T violation and Lorentz invariance violation in this B zero s system nine <ref:2609.02475#pg1>.
Lev: From an error-correction standpoint, it means if we were building hardware to measure these effects, we’d need extremely high fidelity because the Standard Model is holding up as expected here one. But the limits they put on Lorentz invariance violation are still very tight, constraining those parameters down to the O(ten minus fourteen GeV level
one: .
Kai: It's a good result because it means that we haven't seen any major unexpected CP T or Lorentz invariance violation in this specific system yet, which is important for our search for new physics. We need to keep pushing these measurements.
Mira: Agreed. The paper provides the most stringent constraints on both CP T and Lorentz invariance violation in the B zero s system nine <ref:2609.02475#pg2>. It’s a solid piece of work that tightens the bounds on what we expect from nature at these scales one.
Lev: Yeah, I think they proved that their approach works to constrain these symmetries effectively against the noise we have in real hardware setups.
More episodes
- Daily Summary for 2026-11-19
- 2512.21290-Model-independent ZH production cross section at FCC-ee
- 2610.21982-First Observation of the Radiative Decay D 0 to gamma omega
- The day in conversation for 2026-11-19
- Daily Summary for 2026-11-19
- Daily Summary for 2026-11-18
- 2512.08065-Searches for Light Dark Matter and Evidence of Coherent Elastic Neutrino-Nucleus Scattering of Solar Neutrinos with the LUX-ZEPLIN (LZ) Experiment
- Daily Summary for 2026-11-18
- 2508.18022-Precision Measurements of the Electroweak Mixing Angle in the Region of the Z pole at the Large Hadron Collider
- 2512.23992-Prospect for measurement of CP-violating parameters of B s 0 to phi gamma at the Tera Z factory