Precise Measurement of the Inclusive Cross Sections of Open-Charm Mesons at Energies from 3.80 to 4.95 GeV
summary
The gist
Precise measurement of inclusive open-charm meson cross sections at energies from 3.80 to 4.95 GeV provides a vital reference for understanding hadron production and for validating global R value…
In short
The study measured inclusive cross sections for open-charm mesons ($D^0, D^+, D_s^+$) produced in $e^+e^-$ collisions between 3.80 and 4.95 GeV. These measurements serve as a vital reference for understanding hadron production and validating global R value results, showing significant deviations from simple perturbative QCD predictions due to threshold effects and charmonium resonances.
Key concepts
- Inclusive Open-Charm Production
- This refers to measuring the total rate of producing any open-charm meson ($D^0, D^+, D_s^+$) when $e^+e^-$ annihilate. It is important because it dominates the total hadronic yield above the production threshold, making it a key benchmark for hadronization dynamics.
- R Value
- The R value is a quantity used to describe the total hadronic cross section in $e^+e^-$ annihilation. The paper shows that this value deviates from smooth perturbative QCD expectations because of non-perturbative dynamics and the influence of vector charmonium states like $\psi(3770)$.
- Born Cross Section vs. Dressed Cross Section
- The Born cross section is the initial theoretical calculation before accounting for final-state interactions. The dressed cross section incorporates these effects by multiplying the Born term by a factor related to final-state interactions, which are crucial for accurately describing the observed production rates.
Terminology used across episodes
This episode discusses
- Precise Measurement of the Inclusive Cross Sections of Open-Charm Mesons at Energies from 3.80 to 4.95 GeV · Paper Radio
- Few-Body States in Lund String Fragmentation Model
- R measurement and QCD studies at future super tau-c factory
The paper
Precise Measurement of the Inclusive Cross Sections of Open-Charm Mesons at Energies from 3.80 to 4.95 GeV · Read on arXiv
BESIII Collaboration
Transcript
Introduction to the show: ident: High Energy Physics: Experiment. The day in high-energy experiment: detectors, searches and limits.
Kai: We're looking at the paper: "Precise Measurement of the Inclusive Cross Sections of Open-Charm Mesons at Energies from 3.80 to 4.95 GeV".
Mira: Here's the gist of the paper. Precise measurement of inclusive open-charm meson cross sections at energies from 3.80 to 4.95 GeV provides a vital reference for understanding hadron production and for validating global R value results The total hadronic cross section above the opencharm threshold in e+e− annihilation, commonly expressed through the R value, exhibits pronounced deviations from smooth perturbative-QCD (pQCD) expectations due to threshold effects, non-perturbative dynamics, and the presence of vector charmonium states such as ψ(3770), ψ(4040), ψ(4160), and ψ(4415) Measurement Methodology The study presents a measurement of the inclusive open-charm meson processes σ(e+e− → D0/D+/D+s + X), where X denotes any accompanying final-state particles, using data samples collected by the BESIII detector at 150 center-of-mass (c.m.) energy points from 3.80 to 4.95 GeV The inclusive open-charm meson cross sections σ(e+e− → D0X), σ(e+e− → D+X), and σ(e+e− → D+s X) are measured using three selected decay modes: D0 → K−π+++, D+ → K−π++, and D+s → K−−K++ The signal Monte Carlo (MC) samples, referred to as hybrid MC, are generated using the hybrid event generator which combines the conexc, phokhara, and luarlw models The phenomenological parameters of the luarlw component are determined through a dedicated tuning procedure based on the inclusive hadronic events Cross Section Calculation and Iteration The Born cross section for e+e− → DX (where D denotes D0, D+, or D+s) is calculated as σ0 = σobs(1 + δ) · 1 − Π(s)−2=Nobs L · ϵ · B · (1 + δ) · 1 − Π(s)−2 The dressed cross section is defined as σdressed = σ0 · 1 − Π(s)−2, where the ISR effects are removed while the VP effects are retained To construct the input cross section line shapes for the iteration, the observed cross sections for e+e− → D0X, D+X, and D+s X are obtained by averaging independent measurements of the tagged decay modes and their charge-conjugate modes The ISR factors are determined through an iterative procedure based on the hybrid generator simulation This procedure is repeated until the Born cross sections converge Systematic Uncertainties and Results The systematic uncertainties of the measured cross sections arise from various sources, including tracking and PID, the ϕ mass requirement, and the fitting procedure The total uncertainty is obtained by combining the statistical and total systematic uncertainties in quadrature Table I summarizes the relative systematic uncertainties for σ(e+e− → D0X), σ(e+e− → D+X), σ(e+e− → D+s X), and σ(e+e− → D0/D+/D+s + X) Figure 2 shows the measured Born cross sections for the different channels with total uncertainties The cross section for e+e− → D0X is the largest, followed by e+e− → D+X, while e+e− → D+s X is the smallest Physical Interpretation and Significance The summed charmed-baryon contribution is defined as RΛc = RΛ + c Λ¯− c + RΛ + c Λ¯c(2595)− + RΛ + c Λ¯c(2625)− As shown in Fig.
Kai: 3, distinct enhancements are observed near 4.5 and 4.7 GeV, corresponding to the Y (4500) and Y (4700) structures, respectively This confirms that inclusive open-charm meson production constitutes the dominant hadronic contribution above threshold The results establish a benchmark for the dominant hadronic contribution above the opencharm threshold and provide essential input for understanding open-charm production dynamics and for future coupled-channel studies of the vector charmonium and charmonium-like spectrum Future Implications The present measurement of RD, together with RΛc, thus provides a direct and more precise determination of the inclusive open-charm contribution Comparisons between RD and the sum of exclusive channels can constrain contributions from potentially missing open-charm final states Such constraints are expected to reduce ambiguities arising from incomplete channel information, thereby improving the reliability of future determinations of resonance pole positions and channel couplings The present measurement of RD provides valuable experimental input for precision determinations of the anomalous magnetic moment of the muon aµ and the running electromagnetic coupling constant α Acknowledgements The BESIII Collaboration thanks the staff of BEPCII (https://cstr.cn/31109.02.BEPC) and the IHEP computing center for their strong support This work is supported in part by National Key R&D Program of China under Contracts Nos.
Mira: 2025YFA1613900, 2023YFA1606000, 2023YFA1606704; National Natural Science Foundation of China (NSFC) under Contracts Nos.
Kai: 11635010, 11935015, 11935016, 12025502, 12035009, 12035013, 120674; the Chinese Academy of Sciences (CAS) Large-Scale Scientific Facility Program; the Strategic Priority Research Program of Chinese Academy of Sciences under Contract No.
Paper summary: Kai: So we’re looking at this paper titled "Precise Measurement of the Inclusive Cross Sections of Open-Charm Mesons at Energies from three point eight zero to four point nine five GeV" <ref:2610.31291#pg1,Precise Measurement of the Inclusive Cross Sections of Open-Charm Mesons at>. Basically, they used data from BESIII collecting e+e- collisions between three point eight zero and four point nine five giga electron volt center-of-mass energies to measure how much open charm mesons are being produced inclusively.
Mira: Right, so the core thesis here is that by tagging a D zero, or a D plus, or a D s plus meson, they can measure the inclusive production cross sections of open-charm mesons sigma(e+e- to D zero/D+/D s+ + X), where X means any other accompanying particles <ref:2610.31291#pg1,the inclusive production cross sections of open-charm mesons>. They claim that this measurement is a vital reference point for understanding how hadrons are produced and also for checking those global R value results we see in e+e- annihilation.
Lev: But what they’re really aiming to do is use these measurements as a benchmark against the sum of all those exclusive channels that we’ve measured before. That comparison is supposed to show us how complete our current exclusive datasets actually are and clarify the underlying hadronization mechanisms in this open-charm region.
Kai: And it gets interesting because the paper points out that open-charm production dominates the total hadronic yield above the threshold for these collisions. Because of that, these measurements give us crucial input when we want to investigate heavier charmonia and exotic states that couple to open-charm final states.
Mira: Exactly, and they use this comparison directly to evaluate the completeness of current exclusive datasets. It helps clear up how things hadronize in this open-charm region. The paper also highlights that the total hadronic cross section above the open-charm threshold in e+e- annihilation, which we call the R value, shows pronounced deviations from what smooth perturbative quantum chromodynamics or pQCD expectations would predict due to threshold effects and non-perturbative dynamics.
Lev: That deviation is key because it points to things like vector charmonium states such as psi(three thousand seven hundred seventy), psi(four thousand forty), psi(four thousand one hundred sixty), and psi(four thousand four hundred fifteen) being present. These are the stuff that messes up the smooth pQCD expectation right near threshold.
Kai: So, to measure this, they used data samples collected by BESIII at fifteen hundred center-of-mass energy points between three point eight zero and four point nine five giga electron volt. They measured cross sections for sigma(e+e- to D zero X), sigma(e+e- to D+ X), and sigma(e+e- to D s+ X) by using three selected decay modes: D zero decaying to K minus pion plus pion plus pion, D+ decaying to K minus pion plus pion, and D s+ decaying to K minus kaon plus two pions <ref:2610.31291#pg1>.
Paper summary: Mira: They generate signal Monte Carlo samples called hybrid MC using a hybrid event generator that combines the conexc, phokhara, and luarlw models. The phenomenological parameters for the luarlw component are tuned through a dedicated procedure based on those inclusive hadronic events.
Lev: And for the cross section calculation itself, they start with the Born cross section sigma zero which is calculated as sigma zero = sigma obs(one + delta) times one - (s)-two N obs L times epsilon. Then they define the dressed cross section as sigma dressed = sigma zero times one - (s)-two where they remove the initial state radiation effects but keep the vector meson effects.
Kai: To build those input cross section line shapes for their iteration, they get the observed cross sections for e+e- to D zero X, D+ X, and D s+ X by averaging independent measurements of those tagged decay modes and their charge-conjugate modes <ref:2610.31291#pg1>. The ISR factors are determined through an iterative procedure based on the hybrid generator simulation, which they repeat until the Born cross sections converge.
Mira: The systematic uncertainties they deal with come from several things: tracking and particle identification, the phi mass requirement, and the fitting procedure itself. They combine statistical uncertainty and total systematic uncertainty in quadrature to get a total uncertainty figure. Table one summarizes these relative systematic uncertainties for sigma(e+e- to D zero X), sigma(e+e- to D+ X), sigma(e+e- to D s+ X), and the inclusive sum sigma(e+ e- to D zero/D+/D s+ + X) <ref:2610.31291#pg1,D^0/D^+/D_s^+ + X>.
Lev: Figure two shows the measured Born cross sections for the different channels with their total uncertainties. And it looks like sigma(e+e- to D zero X) is the largest, followed by sigma(e+e- to D+ X), while sigma(e+e- to D s+ X) is the smallest among these three <ref:2610.31291#pg1>.
Kai: When we look at the physical interpretation of this measurement, they define the summed charmed-baryon contribution as R c = R+ c + R+ c (two thousand five hundred ninety-five-) + R+ c (two thousand six hundred twenty-five-). They show in figure three that they see distinct enhancements near four point five and four point seven giga electron volt, corresponding to the Y four five zero and Y four seven zero structures, respectively.
Paper summary: Mira: That confirms that inclusive open-charm meson production is the dominant hadronic contribution above the open-charm threshold. These results set a benchmark for that dominant hadronic contribution above the open-charm threshold and give essential input for understanding open-charm production dynamics and for future coupled-channel studies of the vector charmonium and charmonium like spectrum.
Lev: The paper also mentions that by comparing RD with the sum of exclusive channels, they can constrain contributions from potentially missing open-charm final states. This constraint is expected to reduce ambiguities arising from incomplete channel information, which should improve the reliability for future determinations of resonance pole positions and channel couplings.
Kai: And beyond that, this measurement of RD along with R c provides a more direct and precise determination of the inclusive open-charm contribution. Furthermore, comparing RD against the sum of exclusive channels can constrain contributions from missing open-charm final states, which helps reduce ambiguities arising from incomplete channel information to improve future determinations of resonance pole positions and channel couplings.
Mira: And it also gives valuable experimental input for precision determinations of the anomalous magnetic moment of the muon alpha mu and the running electromagnetic coupling constant alpha. So, these measurements connect this hadron production study to other important areas in particle physics.
Lev: The paper does mention that they are comparing their results against smooth pQCD expectations, but they also acknowledge that there are non-perturbative dynamics at play. They specifically state that the total hadronic cross section above the open-charm threshold in e+e- annihilation exhibits pronounced deviations from smooth pQCD expectations due to threshold effects, non-perturbative dynamics, and the presence of vector charmonium states such as psi(three thousand seven hundred seventy), psi(four thousand forty), psi(four thousand one hundred sixty), and psi(four thousand four hundred fifteen) that are present.
Kai: So the main point is that this inclusive measurement is a vital reference for understanding hadron production, and it validates those global R value results. It also serves as a benchmark for comparison with the sum of measured exclusive channels to clarify the underlying hadronization mechanisms in the open-charm region.
Mira: And what this means for us is that we get crucial inputs when investigating heavier charmonia and exotic states coupled to open-charm final states, while it acts as a benchmark for those exclusive measurements. It's a way to evaluate how complete those exclusive datasets are and clarify the actual hadronization mechanisms in the open-charm region.
Paper summary: Lev: The paper does state that their method involves an iterative procedure where they reparameterize and smooth the Born cross section after obtaining the ISR factor together with the VP factor to serve as input line shape for subsequent iterations in their hybrid simulation. That’s a bit complex for real hardware, I gotta think about how much overhead that actually lands on our error budget.
Kai: Yeah, that iterative process is what allows them to account for those production fractions of known and unknown open-charm processes within the hybrid MC framework. It's how they handle the complexity of the dynamics in this region.
Mira: So, to wrap up this section, we have a precise measurement of inclusive open-charm meson cross sections at energies from three point eight zero to four point nine five giga electron volt, and these measurements provide a vital reference for understanding hadron production and validating global R value results.
Lev: And the overall implication is that when we compare RD against the sum of exclusive channels, we can constrain contributions from potentially missing open-charm final states. This constraint is expected to reduce ambiguities arising from incomplete channel information, which should improve the reliability for future determinations of resonance pole positions and channel couplings.
Kai: So this work connects a lot here: it’s a precise measurement that helps us understand hadron production dynamics in the open-charm region, and it sets a benchmark for how complete our exclusive datasets are.
Mira: And it also gives us inputs to study heavier charmonia and exotic states coupled to open-charm final states. It's a way to test the assumptions about non-perturbative dynamics at threshold that we usually have in our theoretical models.
Lev: The paper does state a limitation, though, and they flag that their method involves parameterizing and smoothing the observed cross section using variable span smoothing methods for the ISR factor before feeding it back into the hybrid simulation for subsequent iterations. That's a bit of a caveat on how clean that input line shape really is.
Kai: So they acknowledge that the input line shape itself is parameterized and smoothed, which means there’s an assumption baked into how much uncertainty carries through from that smoothing process.
Mira: And since they are using this inclusive measurement to constrain things like the anomalous magnetic moment of the muon alpha mu, it’s showing how these low-energy hadron production details feed into larger precision tests of QED and beyond.
Lev: It's interesting because we’re talking about very low energy dynamics here, and how they are using this to constrain parameters that affect high energy processes. That’s a big conceptual leap if it holds up under scrutiny with real hardware constraints.
Conclusion: Kai: So we've been looking at how these inclusive open-charm cross sections are measured across those energy points from three point eight zero to four point nine five giga electron volt, and now we’re getting to the conclusion of this paper titled "Precise Measurement of the Inclusive Cross Sections of Open-Charm Mesons at Energies from three point eight zero to four point nine five GeV".
Mira: Yeah, looking at the authors, this work is really establishing a solid baseline for how we see hadron production when we go above that open-charm threshold in e+e- annihilation.
Lev: And what this means for us is that they’re essentially giving us a very precise map of where the bulk of the hadronic yield comes from at these energies.
Kai: Exactly, so if you only listen to this, just know that the total open-charm production isn't just background noise; it's actually the dominant part of what happens in those collisions.
Mira: And they use this as a real benchmark against all those other exclusive measurements we've done before, which is crucial for checking if our exclusive datasets are complete enough.
Lev: It’s about constraining what might be missing in those exclusive channels, which helps us get a better handle on the underlying hadronization mechanisms.
Kai: So this paper is giving us the tools to test those models that describe how things come together in this open-charm region.
Mira: And it also gives us some important numbers for studying heavier charmonia and exotic states that couple to these open-charm final states.
Lev: It’s a vital piece of data for those coupled-channel studies we've been planning, especially since those structures near four point five and four point seven giga electron volt are so clear in the inclusive data.
Kai: So they confirm that the Y four five zero and Y four seven zero structures are definitely real things in this total production picture.
Mira: This whole measurement is a direct way to figure out how much of the total hadronic yield is accounted for by these open-charm mesons, which is really important for validating those global R value results we talk about.
Lev: And it’s not just a number; it’s setting a standard for what that dominant contribution looks like above threshold.
Kai: So moving forward, this gives us the foundation to start digging into what's happening with those heavier charmonia and exotic states, which is where things get really interesting.
More episodes
- Daily Summary for 2026-11-19
- 2512.21290-Model-independent ZH production cross section at FCC-ee
- 2610.21982-First Observation of the Radiative Decay D 0 to gamma omega
- The day in conversation for 2026-11-19
- Daily Summary for 2026-11-19
- Daily Summary for 2026-11-18
- 2512.08065-Searches for Light Dark Matter and Evidence of Coherent Elastic Neutrino-Nucleus Scattering of Solar Neutrinos with the LUX-ZEPLIN (LZ) Experiment
- Daily Summary for 2026-11-18
- 2508.18022-Precision Measurements of the Electroweak Mixing Angle in the Region of the Z pole at the Large Hadron Collider
- 2512.23992-Prospect for measurement of CP-violating parameters of B s 0 to phi gamma at the Tera Z factory