3D software compensation of hadronic showers in the CRILIN crystal calorimeter
summary
The gist
Future electron–positron colliders such as FCC-ee require excellent jet energy resolution to fully exploit their Higgs physics potential and to precisely measure Higgs boson couplings to quarks.
In short
This work investigates software compensation techniques for CRILIN, a crystal ECAL, to improve jet energy resolution for future colliders. Two methods were tested: simple one-dimensional corrections using shower shape observables and an advanced ParticleNet Graph Neural Network exploiting the full 3D shower topology. The GNN approach significantly outperformed simple corrections, reducing the stochastic term in energy resolution from over 69% to 27.6%, showing that detailed topological information can effectively compensate for non-linear responses.
Key concepts
- Non-compensating Calorimeters
- These detectors respond differently to electromagnetic and hadronic energy deposits. This difference causes fluctuations in the electromagnetic fraction (fEM) from neutral pion production, leading to degraded energy resolution and a non-linear response in the measured energy.
- Transverse Shower RMS (RRMS)
- This is a measure of how spread out the shower is perpendicular to its axis. It quantifies the width of the shower by calculating the root mean square distance between each hit and the center-of-gravity, providing a simple observable for energy correction.
- ParticleNet Graph Neural Network (GNN)
- A sophisticated AI model used here that treats calorimeter hits as nodes in a graph. Each hit is represented by its 3D position and energy. The network learns complex relationships across the entire shower topology to reconstruct the true deposited energy, outperforming simpler methods.
- Stochastic Term (S·√E[GeV])
- This term represents the statistical uncertainty in the reconstructed energy measurement. The paper shows that by applying software compensation, this uncertainty is drastically reduced—for example, from 69.4% before correction to 27.6% after using the GNN.
Terminology used across episodes
This episode discusses
- 3D software compensation of hadronic showers in the CRILIN crystal calorimeter · Paper Radio
- Software Compensation for Highly Granular Calorimeters using Machine Learning
- Design and beam-test characterization of the CRILIN semi-homogeneous crystal calorimeter
- Geant4: a Game Changer in High Energy Physics and Related Applicative Fields
- Design and optimization of a hadronic calorimeter based on micropattern gaseous detectors for a future experiment at the Muon Collider
- End-to-end event reconstruction for precision physics at future colliders
The paper
3D software compensation of hadronic showers in the CRILIN crystal calorimeter · Read on arXiv
Laboratori Nazionali di Frascati dell’INFN Sezione di Frascati, Italy · INFN Sezione di Firenze, Florence, Italy · INFN Sezione di Roma1, Rome, Italy
DOI: 10.1088/1748-0221/21/11/P11018
Transcript
Introduction to the show: ident: High Energy Physics: Experiment. The day in high-energy experiment: detectors, searches and limits.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "3D software compensation of hadronic showers in the CRILIN crystal calorimeter".
Mira: Here's the gist of the paper. Future electron–positron colliders such as FCC-ee require excellent jet energy resolution to fully exploit their Higgs physics potential and to precisely measure Higgs boson couplings to quarks.
Kai: In this work, software compensation techniques are investigated for CRILIN, a crystal ECAL based on a semi-homogeneous concept, featuring longitudinally segmented Cherenkov PbF2 crystal matrices and silicon photomultiplier (SiPM) readout.
Mira: The ParticleNet Graph Neural Network exploiting the full three-dimensional shower topology achieves significantly improved performance with respect to simple energy sum reconstruction.
Kai: The reconstruction of hadronic showers is fundamentally complicated by fluctuations of the electromagnetic fraction fEM generated by neutral pion production.
Paper summary: Kai: To summarize this paper on "three dee software compensation of hadronic showers in the CRILIN crystal calorimeter", they're looking at how to boost jet energy resolution for future colliders <ref:2606.05111#pg1,3D software compensation of hadronic showers in the CRILIN crystal calorimeter>. The main idea is that because these crystal calorimeters have a very non-compensating response, you need better ways to reconstruct the hadron energy.
Mira: They are testing software compensation techniques on CRILIN, which uses longitudinally segmented Cherenkov PbF2 crystals with silicon photomultiplier readout. The thesis is that they can use shower shape observables—like transverse RMS and longitudinal center of gravity—to correct for the energy loss due to these fluctuations.
Lev: It claims that even without using dual-readout for an intermediate fraction estimation, software compensation in this Cherenkov-based calorimeter with three dimensional readout can reach the performance level of a dual-readout calorimeter when using Graph Neural Networks.
Kai: The paper specifically points out that crystal calorimeters are a tough case because their great electromagnetic performance comes at the cost of a highly non-compensating response, which could really hurt the combined ECAL plus HCAL resolution if you put an HCAL with good resolution downstream.
Mira: They suggest that modern calorimeters with fine longitudinal and transverse segmentation have detailed information about how the shower develops, and that this detailed information can be used to recover some of what's lost.
Lev: The method they use, the ParticleNet architecture for the GNN, takes those hits—position and energy—and it learns to map them to the true energy deposited inside CRILIN.
Conclusion: Kai: Looking at the work by Ciccarella, Gargiulo, Sarra, et al., about this three dee software compensation for CRILIN, the implication is that this type of detector isn't totally hopeless when it comes to hadronic energy reconstruction <ref:2606.05111#pg1>.
Mira: They show that even though crystal calorimeters are inherently non-compensating, using these software techniques can recover a lot of the information lost from shower fluctuations.
Lev: So what this means practically is that this technique could be a viable alternative to needing dual-readout calorimetry in ECALs for achieving the necessary resolution targets at future colliders.
Kai: They found that CRILIN contributes less than five percent to the total hadronic energy resolution for beam energies above thirty GeV, which is a solid number for this type of detector <ref:2606.05111#pg2>.
Mira: And they also say that for beam energies above forty GeV, the contribution of CRILIN to the combined calorimetric resolution is below approximately five percent.
Lev: It’s important to remember that the method they used relies on those detailed shower development features being available from their segmentation and readout system.
Kai: So, this paper shows that detailed information about how a shower develops can help correct for non-compensation in these crystal detectors by using advanced neural network techniques.
More episodes
- Daily Summary for 2026-11-19
- 2512.21290-Model-independent ZH production cross section at FCC-ee
- 2610.21982-First Observation of the Radiative Decay D 0 to gamma omega
- The day in conversation for 2026-11-19
- Daily Summary for 2026-11-19
- Daily Summary for 2026-11-18
- 2512.08065-Searches for Light Dark Matter and Evidence of Coherent Elastic Neutrino-Nucleus Scattering of Solar Neutrinos with the LUX-ZEPLIN (LZ) Experiment
- Daily Summary for 2026-11-18
- 2508.18022-Precision Measurements of the Electroweak Mixing Angle in the Region of the Z pole at the Large Hadron Collider
- 2512.23992-Prospect for measurement of CP-violating parameters of B s 0 to phi gamma at the Tera Z factory