Low cross-plane thermal conductivity of kappa-Ga 2 O 3 thin films
summary
The gist
The thermal conductivities of (001) κ-Ga2O3 thin films deposited on c-plane sapphire substrates were measured with frequency-domain thermoreflectance (FDTR) to investigate their size and temperature…
In short
This study measured and analyzed the cross-plane thermal conductivity of kappa-Ga2O3 thin films across various thicknesses and temperatures using frequency-domain thermoreflectance. Results showed a weak size dependence, suggesting short phonon mean free paths due to the complex crystal structure. The low thermal conductivity necessitates alternative thermal management strategies for Ga2O3 electronics.
Key concepts
- Cross-plane Thermal Conductivity
- This measures how well heat moves perpendicular to the film surface. In this study, it was found to be relatively low (around 1.83 to 2.26 W/m·K) for kappa-Ga2O3 films, which is crucial for understanding device performance and heat dissipation.
- Phonon Mean Free Path (MFP)
- Phonons are the quantum mechanical vibrations in a crystal that carry heat. The MFP is the average distance these vibrations travel before scattering. The paper suggests that kappa-Ga2O3 has intrinsically short MFPs, meaning phonons scatter frequently, which limits its thermal conductivity.
- Size Dependence
- This refers to how the thermal conductivity changes as the physical thickness of the thin film is varied. The study found a weak size dependence because most of the heat transport is limited by internal crystal structure rather than just film thickness, indicating short phonon MFPs in this material.
Terminology used across episodes
This episode discusses
The paper
Low cross-plane thermal conductivity of kappa-Ga 2 O 3 thin films · Read on arXiv
Seungwon Park, Jingyu Tang, Minsung An, Alan J. H. McGaughey, Lisa M. Porter, Robert F. Davis, Jonathan A. Malen
Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania and Department of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania
The thermal conductivities of (001) κ-Ga 2 O 3 thin films deposited on c-plane sapphire substrates were measured with frequency-domain thermoreflectance (FDTR). The thermal conductivity increases from 1.83+0.19-0.18 W/m times K to 2.26+0.35-0.40 W/m times K as the thicknesses increase from 159 nm to 689 nm. This weak thickness dependence indicates that the majority of the intrinsic phonon mean free paths are smaller than the range of investigated film thicknesses. First-principles-based calculations that include phonon-phonon and phonon-boundary scattering capture this size-dependent behavior and support our experimental observation. Temperature-dependent measurements of a 689 nm film from 293 to 400 K show a decrease in thermal conductivity with increasing temperature due to enhanced phonon-phonon scattering. A weaker temperature dependence is observed in a 159 nm film where phonon-boundary scattering becomes more prominent. At comparable film thicknesses, our measured κ-Ga 2 O 3 films exhibit lower values of cross-plane thermal conductivity than the other experimentally measured Ga 2 O 3 polymorphs. Our experimental observations are supported by prior predictions, which suggest that the low thermal conductivity of κ-Ga 2 O 3 results from its complex crystal structure, which leads to increased anharmonicity and lower phonon group velocities relative to other polymorphs. Thermal management strategies, such as integration with high-thermal-conductivity substrates, may thus be required to mitigate self-heating for κ-Ga 2 O 3-based electronic devices.
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: We're looking at the paper: "Low cross-plane thermal conductivity of kappa-Ga 2 O 3 thin films".
Mira: Here's the gist of the paper. The thermal conductivities of (001) κ-Ga2O3 thin films deposited on c-plane sapphire substrates were measured with frequency-domain thermoreflectance (FDTR) to investigate their size and temperature dependence, revealing that the cross-plane thermal conductivity ranges from 1.83 +0.19 −0.18 W/m·K to 2.26 +0.35 −0.40 W/m·K across thicknesses from 159 nm to 689 nm Experimental Results and Size Dependence The thermal conductivities of (001) κ-Ga2O3 thin films increased from 1.83 +0.19 −0.18 W/m·K to 2.26 +0.35 −0.40 W/m·K as the thicknesses increased from 159 nm to 689 nm This weak thickness dependence indicates that the majority of the intrinsic phonon mean free paths are smaller than the range of investigated film thicknesses First-principlesbased calculations that include phonon-phonon and phonon-boundary scattering capture this size-dependent behavior and support our experimental observation Structural and Crystallographic Analysis The as-grown κ films showed only (002) and (004) κ-Ga2O3 peaks other than the substrate peak in HR-XRD patterns Cross-sectional transmission electron microscopy revealed that ∼3 monolayers of pseudomorphic α-Ga2O3 form on the c-plane sapphire substrate, followed by a ∼20 nm transition layer containing a mixture of β and γ phase, with phase-pure κ on top of the transition layer The presence of such in-plane rotational domains is due to the nature of 6-fold symmetry of the c-plane sapphire substrate Temperature Effects and Scattering Mechanisms Temperature-dependent measurements showed a decrease in thermal conductivity with increasing temperature for a 689 nm film from 293 to 400 K due to enhanced phonon-phonon scattering A weaker temperature dependence was observed in a 159 nm film where phonon-boundary scattering becomes more prominent The temperature-dependent thermal conductivities were fitted using k = AT −n, yielding n = 0.23 (95% CI: 0.17-0.29) for the 159 nm film and n = 0.93 (95% CI: 0.61-1.26) for the 689 nm film Comparison with Other Polymorphs and Physical Interpretation At comparable film thicknesses, our measured κ-Ga2O3 films exhibit lower values of cross-plane thermal conductivity than the other experimentally measured Ga2O3 polymorphs This observation is consistent with lattice thermal conductivities predicted by first principles and suggests that the low thermal conductivity of κ-Ga2O3 results from its complex crystal structure, which leads to increased anharmonicity and lower phonon group velocities relative to other polymorphs Since the thermal conductivity of thin-film κ-Ga2O3 is dominated by phonon-phonon scattering, increasing the film thickness is not expected to enhance its thermal conductivity significantly The weak size dependence observed in the thermal conductivity of κ-Ga2O3 is attributed to its intrinsically short phonon MFPs The findings highlight the need for alternative thermal management strategies, such as integration with high thermal conductivity substrates (e.g., diamond or SiC) or engineered composite stacks, for κ-Ga2O3-based power and RF electronics The temperature-dependent measurements show that the junction temperature of Ga2O3-based devices can reach up to 200 ◦C where the thermal conductivity of κ-Ga2O3 is further reduced Supplementary Material see the supplementary material for thin film strain and surface morphology characterization (Figs.
Kai: S1 and S2); film thicknesses and associated uncertainties (Table S1); parameters used in the BPE uncertainty analysis (Table S2) and BPE posterior results for all six films (Figs.
Mira: S3-S8); BPE posterior results for the thickness-dependent measurements (Table S3) and the temperature-dependent measurements of the 159 nm and 689 nm films (Tables S4 and S5, respectively); details of the linear extrapolation method used to estimate G23 (Sec.
Kai: S4 and Fig.
Paper summary: Kai: So wrapping up the paper "Low cross-plane thermal conductivity of kappa-Ga two O three thin films," the main takeaway is that you see this weak size dependence in thermal conductivity because the intrinsic phonon mean free paths are intrinsically short in these materials > <ref:2611.05647#pg3,Low cross-plane thermal conductivity of>
Mira: That finding, combined with their structural analysis showing those transition layers, really highlights how complex the crystal structure is for kappa gallium oxide >
Lev: From an engineering view, it means we can't rely on simply making the film thicker to improve thermal transport; you need to think about the scattering mechanisms directly >
Kai: They also pointed out that in terms of temperature dependence, you get two different behaviors depending on whether you're looking at a thin or thick kappa gallium oxide film >
Mira: And they confirmed that for comparable thicknesses, the measured cross-plane thermal conductivities of kappa gallium oxide are lower than other gallium oxide polymorphs because of its complex structure >
Lev: Ultimately, this work suggests that for using these materials in high performance electronics, we should focus on finding ways to manage the heat flow at the interfaces or by combining them with substrates that have much higher thermal conductivity than sapphire >
Conclusion: Kai: So, we're wrapping up this paper on low cross-plane thermal conductivity of kappa gallium oxide thin films.
Mira: Basically, they looked at these films and found that the thermal conductivity isn't really improving just by making them thicker.
Lev: That weak size dependence is tied to how short those phonon mean free paths are inside the kappa phase itself.
Kai: Right, so it’s not just about thickness anymore; it’s about the internal structure of this specific crystal form.
Mira: And that structure—the more distorted Ga-O polyhedra they have—that's what lowers the average bond stiffness and slows down those phonon group velocities we need.
Lev: From a hardware standpoint, that means scaling up the material thickness won't give us the thermal performance boost we hoped for in this specific setup.
Kai: It makes me think about how we design these devices; if you can’t rely on thicker films for heat sinking, what else is left?
Mira: They also pointed out that at the temperatures you hit, like two hundred degrees Celsius, the thermal conductivity drops even more.
Lev: That temperature dependence gets worse when we push the limits of operation because those phonon-phonon scattering events get stronger.
Kai: So, if we’re building power electronics or RF components with kappa gallium oxide, we really need to focus on interface engineering instead of just material thickness.
More episodes
- 2610.32678-Probing the limits of materials design via a comprehensive crystal database of 14.6 million structures with 140 properties
- 2610.33595-Native-oxide-driven layer asymmetry, two-step switching and exchange bias in Co/Ir/Co trilayers
- 2503.19572-Spin models from nonlinear cellular automata
- 2606.23350-Irreversibility Enhances Quantum-Enhanced Markov-Chain Monte Carlo
- 2608.02744-Two-Parameter Ansatz for the Violation of Eigenstate Thermalization
- 2210.00806-Low- and high-energy localization landscapes for tight-binding Hamiltonians in two-dimensional lattices
- 2409.09625-Selective switch for band-edge alignments in pentagonal CdSeTe monolayer: Atom-valley locking
- 2606.20168-Norms, overlaps and Yangian descendants for the Haldane-Shastry spin chain
- 2512.19503-Strain-induced splitting of the CCDW-NCCDW phase transition in 1T-TaS 2
- 2307.12638-Strong localization of microwaves beyond two dimensions in aperiodic Vogel spirals