The Milky Way's Missing In-Situ Halo
summary
The gist
The Milky Way’s stellar halo preserves a record of its mass assembly history, encoding accretion events in its structural properties Among the most prominent of these features is a strong break in…
In short
This study compared observed Milky Way stellar halo density profiles with those from FIRE-2 and Auriga cosmological simulations. Findings show simulated halos are steeper than MW measurements within 15 kpc, and simulations rarely exhibit strong profile breaks. The discrepancy is attributed to in-situ stars dominating the inner halo in simulations, suggesting a potential issue with dark matter models.
Key concepts
- Stellar Halo Density Profile
- This describes how the density of stars in our galaxy's outer halo changes as you move further away from the center. The Milky Way's profile has a distinct break around 20-30 kpc, which is thought to be caused by past mergers.
- Profile Break
- A sharp change or 'break' in the slope of the density profile. In simulations, these breaks are rare and weaker than those seen in the Milky Way. The study investigates whether these breaks are caused by accretion events or other factors.
- In-situ vs. Accreted Halo Stars
- This refers to two populations of stars: 'in-situ' stars formed within the Milky Way, and 'accreted' stars from smaller galaxies that merged with it. The study found that in-situ stars dominate the inner halo in simulations, while accreted stars better match MW measurements.
- Dark Matter Profile
- This refers to how much dark matter is distributed within a galaxy. The discrepancy between simulations and observations might point to a difference in the assumed dark matter profile—perhaps the Milky Way's dark matter is more 'cored' than what current simulations predict.
Terminology used across episodes
This episode discusses
- The Milky Way's Missing In-Situ Halo · Paper Radio
- Evolutionary Histories of Dwarf Galaxies in the Local Group
- The realm of Aurora. Density distribution of metal-poor giants in the heart of the Galaxy
- A near field guide to Roman's wide-area surveys
The paper
The Milky Way's Missing In-Situ Halo · Read on arXiv
Madeline Lucey, Robyn Sanderson, Alexander H. Riley, Andreia Carrillo, Jenna Samuel, Emma Tasso
Department of Physics & Astronomy, University of Pennsylvania · Lund Observatory, Division of Astrophysics, Department of Physics, Lund University · Department of Physics and Astronomy, Carleton College · Department of Astronomy, The University of Texas at Austin · Cosmic Frontier Center, The University of Texas at Austin · Graduate Center, City University of New York
The Milky Way's stellar halo preserves a record of its mass assembly history, encoding accretion events in its structural properties. Among the most prominent of these features is a strong break in the halo density profile at about 20-30 kpc, long attributed to the apocenter pile-up of stars from the Gaia-Enceladus/Sausage merger. However, whether this interpretation is consistent with state-of-the-art cosmological simulations remains unclear. In this work, we compare the Milky Way's measured stellar halo density profile between galactocentric radii of 1 100 kpc to those of Milky Way-mass galaxies from the FIRE-2 and Auriga cosmological zoom-in simulation suites, spanning a total of 24 simulated galaxies. We find that simulated halo profiles are significantly steeper than Milky Way measurements within about 15 kpc, and that profile breaks are rare in simulations and never as strong as the Milky Way's. Of the three galaxies with statistically significant breaks, only one exhibits a break attributable to apocenter pile-up of an accreted merger remnant. Decomposing the simulated profiles, we find that the accreted halo profiles are broadly consistent with Milky Way measurements, while the in-situ halo dominates within about 20 kpc and drives the discrepancy. These results raise a compelling question: where is the Milky Way's in-situ halo? The origin of this tension may reflect systematic biases in current halo measurements, an overproduction of early spheroidal star formation in cosmological simulations, or more fundamental differences in the underlying physics (e.g., dark matter) governing the assembly and structure of the inner Galaxy.
Transcript
Introduction to the show: ident: Astrophysics Radio. Generated commentary on the latest astrophysics papers.
Vera: I'm Vera.
Jocelyn: And I'm Jocelyn, here with Subrahmanyan.
Vera: We're looking at the paper: "The Milky Way's Missing In-Situ Halo".
Jocelyn: Here's the gist of the paper. The Milky Way’s stellar halo preserves a record of its mass assembly history, encoding accretion events in its structural properties Among the most prominent of these features is a strong break in the halo density profile at ≈20–30 kpc, long attributed to the apocenter pile-up of stars from the Gaia-Enceladus/Sausage merger In this work, we compare the Milky Way’s measured stellar halo density profile between galactocentric radii of 1–100 kpc to those of Milky Way-mass galaxies from the FIRE-2 and Auriga cosmological zoom-in simulation suites, spanning a total of 24 simulated galaxies We find that simulated halo profiles are significantly steeper than Milky Way measurements within ≈15 kpc, and that profile breaks are rare in simulations and never as strong as the Milky Way’s Of the three galaxies with statistically significant breaks, only one exhibits a break attributable to apocenter pile-up of an accreted merger remnant Decomposing the simulated profiles, we find that the accreted halo profiles are broadly consistent with Milky Way measurements, while the in-situ halo dominates within ≈20 kpc and drives the discrepancy These results raise a compelling question: where is the Milky Way’s in-situ halo?
Vera: Comparison of Observational and Simulated Profiles The study compares the Milky Way’s measured stellar halo density profile with those from FIRE-2 and Auriga cosmological zoom-in simulations.
Jocelyn: The authors find that the MW’s measured profile is much flatter within 20 kpc than FIRE-2 and Auriga profiles, with power law slope estimates ranging from ≈ −1.5 to −3, while the simulated profiles have a power law slope of ≈ −4 on average in the same range.
Vera: Furthermore, FIRE-2 and Auriga profiles rarely have breaks, and none exhibit breaks as strong as the MW’s, with smaller changes in slope across the break.
Paper summary: Vera: So, this paper, "The Milky Way's Missing In-Situ Halo," it looks at how our galaxy's stellar halo tells us about its history by looking at the structural properties of those stars.
Jocelyn: It focuses on a strong break in that density profile around twenty to thirty kiloparsecs, which we usually attribute to stars piled up from the Gaia-Enceladus and Sausage merger.
Subrahmanyan: It sets up a comparison between the Milky Way's measured stellar halo density profile across one to one hundred kiloparsecs and profiles from two cosmological zoom-in simulation suites, FIRE-two and Auriga, which cover twenty four simulated galaxies <ref:2606.16277#pg1>.
Vera: What they find immediately is that the simulated halo profiles are significantly steeper than the actual Milky Way measurements within fifteen kiloparsecs. And they also say that profile breaks are rare in those simulations, and never as strong as what we see in our Milky Way.
Jocelyn: They specifically point out that of the three galaxies with statistically significant breaks, only one has a break that can be attributed to the apocenter pile-up of an accreted merger remnant.
Subrahmanyan: When they decompose these simulated profiles, they find that the accreted halo profiles broadly match our Milky Way measurements, but it’s the in-situ halo component dominating within those first twenty kiloparsecs that drives this discrepancy.
Vera: That leads to a really compelling question for us: where exactly is this in-situ halo we're not seeing clearly?
Jocelyn: So, if we look at the comparison between our measurements and what the simulations are producing, they find that the Milky Way’s measured profile is much flatter within twenty kiloparsecs than the FIRE-two and Auriga profiles <ref:2606.16277#pg1>.
Subrahmanyan: The power law slope estimates for our Milky Way range from negative one point five to negative three, while the simulated profiles have an average power law slope of negative four in that same radial range.
Vera: And on top of that, they say those simulations rarely show breaks at all, and when they do have them, they aren't as strong as the MW’s breaks are, with smaller changes in slope across the break.
Jocelyn: They also investigated the profile breaks in simulations and found that cosmological hydrodynamic simulations don't show a break and are much steeper than the Milky Way profiles within fifteen kiloparsecs.
Paper summary: Subrahmanyan: When they fit single and broken power law profiles to those Milky Way mass cosmological zoom-in simulations, they find that only one out of twenty four simulated galaxies has a break in its halo profile that is related to the apocenter pile-up of an accreted system.
Vera: They also found that the accreted profile breaks with strengths greater than two are all from FIRE-two simulations, and given that the Auriga accreted profiles also have a lower fraction of statistically significant breaks, they find that FIRE-two simulations produce systematically stronger breaks in their accreted halo profiles than Auriga simulations <ref:2606.16277#pg1>.
Jocelyn: Now we’re getting into how they break down the overall structure of these halos using halo tracking catalogs to see the relative contributions of in-situ and accreted stars.
Subrahmanyan: The results show that the simulated galaxy halos are dominated by in-situ stars at galactic radii less than or equal to twenty kiloparsecs.
Vera: Conversely, the measured Milky Way profiles match what they find for the accreted halo stars found in those simulated galaxies.
Jocelyn: This decomposition suggests that it's the in-situ halo stars that are driving this discrepancy between what we measure and what's simulated.
Subrahmanyan: Since those in-situ halo stars dominate within ten to twenty kiloparsecs, and the inner stellar halo density slope depends on the dark matter profile more than on merger history, it’s possible this tension reflects dark matter physics rather than just galaxy formation processes.
Vera: So what does that mean for our models? If we have a more cored dark matter profile in our Milky Way compared to the simulations, that could be the underlying cause of this tension between the observed profiles and what we see in FIRE-two and Auriga <ref:2606.16277#pg1>.
Jocelyn: That opens up a lot of avenues for future work, looking into cosmologies that give more quiescent early formation histories or perhaps different dark matter density profiles altogether.
Subrahmanyan: They also mention that they acknowledge the sample selection biases, noting that when comparing age-constrained literature results with simulated profiles, there is better agreement when matching the selection of those literature results.
Vera: Specifically, when they restrict the simulated halo profiles to only stars with iron abundance less than negative one point three, they find better agreement with the result from Kurbatov et al. in two thousand twenty-four.
Jocelyn: But even then, the FIRE-two simulations still show a small overabundance within ten kiloparsecs of the Galactic center <ref:2606.16277#pg1>.
Paper summary: Subrahmanyan: Regarding the origins of these in-situ stellar populations, they suggest two main possibilities: stars born through ELS-like dissipational contraction in the early universe where star formation happens on halo-like orbits, or stars born in the disk that get heated to halo orbits.
Vera: They found that the fraction of in-situ halo stars with disky origins decreases as you move to larger galactic radii, and for most cases except m12m, the majority of in-situ halo stars don't even have disk origins at all.
Jocelyn: Generally, they find that most of these in-situ stellar halo stars are born on spheroidal orbits and not heated up from the disk into those halo orbits.
Subrahmanyan: The paper points out that the results indicate a significant discrepancy between cosmological hydrodynamic simulations and our Milky Way measurements.
Vera: It really suggests that it remains possible that improved, less biased measurements of our inner halo will resolve this discrepancy.
Jocelyn: If those measurements continue to show a flatter inner halo, then we might need to reconsider how we model galaxy formation or look for cosmologies with different early formation histories.
Subrahmanyan: The researchers also flag that it remains possible that the radius within which the in-situ stars dominate the simulated stellar halo profiles just happens to align with our Milky Way's profile breaks, rather than being the true physical driver of it.
Vera: So, to wrap up on "The Milky Way's Missing In-Situ Halo," this paper shows that the in-situ stars within twenty kiloparsecs are what’s causing the mismatch with our observational data.
Jocelyn: It highlights a tension between what we measure and what simulations predict, specifically showing that simulated halos are steeper than ours close to the center.
Subrahmanyan: The paper suggests that the most likely physical cause for this is a more cored dark matter profile in our Milky Way relative to the simulations.
Vera: It’s an interesting path forward because it keeps pointing us toward needing better measurements of our inner halo structure to settle whether we're looking at physics or just observational limitations.
Jocelyn: And those new observations, like those planned for the Nancy Grace Roman Space Telescope and Euclid, will be crucial in figuring out if this tension is real or just an outlier.
Subrahmanyan: It seems like a lot of work ahead to confirm whether we need to adjust our galaxy formation theories or if we need to look at different cosmological models.
Conclusion: Vera: So, this paper, "The Milky Way's Missing In-Situ Halo," basically looks at how our galaxy’s stellar halo tells us about its history by focusing on a structural feature called a density break.
Jocelyn: It zeroes in on that break around twenty to thirty kiloparsecs, which we usually think is caused by stars piling up from the Gaia-Enceladus and Sausage merger.
Subrahmanyan: The authors compare our Milky Way’s measured stellar halo density profile across one to one hundred kiloparsecs with profiles from two cosmological zoom-in simulations, FIRE-two and Auriga, which cover twenty four simulated galaxies.
Vera: What they found right away is that the simulated halo profiles are significantly steeper than the actual Milky Way measurements within fifteen kiloparsecs. And they also say that profile breaks are rare in those simulations, and never as strong as what we see in our Milky Way.
Jocelyn: They specifically point out that of the three galaxies with statistically significant breaks, only one has a break related to the apocenter pile-up of an accreted merger remnant.
Subrahmanyan: When they break down these simulated profiles, they find that the accreted halo profiles broadly match our Milky Way measurements, but it’s the in-situ halo component dominating within those first twenty kiloparsecs that drives this discrepancy.
Vera: That leads to a really compelling question for us: where exactly is this in-situ halo we're not seeing clearly?
Jocelyn: So, if we look at the comparison between our measurements and what the simulations are producing, they find that the Milky Way’s measured profile is much flatter within twenty kiloparsecs than the FIRE-two and Auriga profiles.
Subrahmanyan: The power law slope estimates for our Milky Way range from negative one point five to negative three, while the simulated profiles have an average power law slope of negative four in that same radial range.
Vera: And on top of that, they say those simulations rarely show breaks at all, and when they do have them, they aren't as strong as the MW’s breaks are, with smaller changes in slope across the break.
Jocelyn: They also investigated the profile breaks in simulations and found that cosmological hydrodynamic simulations don't show a break and are much steeper than the Milky Way profiles within fifteen kiloparsecs.
Subrahmanyan: When they fit single and broken power law profiles to those Milky Way mass cosmological zoom-in simulations, they find that only one out of twenty four simulated galaxies has a break in its halo profile that is related to the apocenter pile-up of an accreted system.
Vera: They also found that the accreted profile breaks with strengths greater than two are all from FIRE-two simulations, and given that the Auriga accreted profiles also have a lower fraction of statistically significant breaks, they find that FIRE-two simulations produce systematically stronger breaks in their accreted halo profiles than Auriga simulations.
Jocelyn: Now we’re getting into how they break down the overall structure of these halos using halo tracking catalogs to see the relative contributions of in-situ and accreted stars.
Wrap-up: Subrahmanyan: The results show that the simulated galaxy halos are dominated by in-situ stars at galactic radii less than or equal to twenty kiloparsecs.
Vera: Conversely, the measured Milky Way profiles match what they find for the accreted halo stars found in those simulated galaxies.
Jocelyn: This decomposition suggests that it's the in-situ halo stars that are driving this discrepancy between what we measure and what's simulated.
Subrahmanyan: Since those in-situ halo stars dominate within ten to twenty kiloparsecs, and the inner stellar halo density slope depends on the dark matter profile more than on merger history, it’s possible this tension reflects dark matter physics rather than just galaxy formation processes.
Vera: So what does that mean for our models? If we have a more cored dark matter profile in our Milky Way compared to the simulations, that could be the underlying cause of this tension between the observed profiles and what we see in FIRE-two and Auriga.
Jocelyn: That opens up a lot of avenues for future work, looking into cosmologies that give more quiescent early formation histories or perhaps different dark matter density profiles altogether.
Subrahmanyan: They also mention that they acknowledge the sample selection biases, noting that when comparing age-constrained literature results with simulated profiles, there is better agreement when matching the selection of those literature results.
Vera: Specifically, when they restrict the simulated halo profiles to only stars with iron abundance less than negative one point three, they find better agreement with the result from Kurbatov et al. in two thousand twenty-four.
Jocelyn: But even then, the FIRE-two simulations still show a small overabundance within ten kiloparsecs of the Galactic center.
Subrahmanyan: Regarding the origins of these in-situ stellar populations, they suggest two main possibilities: stars born through ELS-like dissipational contraction in the early universe where star formation happens on halo-like orbits, or stars born in the disk that get heated to halo orbits.
Vera: They found that the fraction of in-situ halo stars with disky origins decreases as you move to larger galactic radii, and for most cases except m12m, the majority of in-situ halo stars don't even have disk origins at all.
Jocelyn: Generally, they find that most of these in-situ stellar halo stars are born on spheroidal orbits and not heated up from the disk into those halo orbits.
Subrahmanyan: The paper points out that the results indicate a significant discrepancy between cosmological hydrodynamic simulations and our Milky Way measurements.
Vera: It really suggests that it remains possible that improved, less biased measurements of our inner halo will resolve this discrepancy.
Jocelyn: If those measurements continue to show a flatter inner halo, then we might need to reconsider how we model galaxy formation or look for cosmologies with different early formation histories.
Subrahmanyan: The researchers also flag that it remains possible that the radius within which the in-situ stars dominate the simulated stellar halo profiles just happens to align with our Milky Way's profile breaks, rather than being the true physical driver of it.
More episodes
- 2607.28919-Strongly Magnetized Super-Eddington Accretion: How Spin and Accretion Rate Regulate Energy Output and Mass Loss
- 2607.08835-Hybrid Simulations of Proton Acceleration at Oblique High- beta Shocks
- 2606.29552-Improving the Precision of Line-by-Line Radial Velocities: A Data-Driven Iterative Algorithm for Spectral Line Selection
- 2609.05312-Evidence for LP 890-9d via Transit Timing Variations
- 2609.10319-Extending the Little Red Dot population at intermediate redshift with VIPERS
- 2611.14233-Probing for anisotropies at different angular scales in the arrival directions of the cosmic rays detected at the Pierre Auger Observatory
- 2610.21722-Hydrostatic Equilibrium Estimate of the Fuzzy Dark Matter Mass from Dwarf Spheroidals: Method and Systematics
- 2610.40550-An Empirically Calibrated [C II] Luminosity-Halo Mass Relation for Line Intensity Mapping
- 2607.27328-PANTERA. I. Hunting for the Most Metal-Rich Stars in the Solar Neighborhood with High-Resolution Spectroscopy
- 2607.09850-Low-hard to high-soft spectral state transitions in the faintest early-X-ray-detected optical tidal disruption event TDE 2025aarm