The Atacama Cosmology Telescope: Release of A databaSe of millimeTeR ObservatioNs of Asteroids Using acT

summary

The gist

We present A databaSe of millimeTeR ObservatioNs of Asteroids Using acT (ASTRONAUT) hosted on Amazon Web Services, Inc.

In short

A database of millimeter observations of 170 asteroids using data from the Atacama Cosmology Telescope (ACT) between 2017 and 2021 is presented. The data, stored on AWS S3, includes flux measurements at frequencies near 90, 150, and 228 GHz. This resource allows users to create light curves and study the millimeter flux variation of these asteroids.

Key concepts

ACT Observations
The Atacama Cosmology Telescope is a large telescope in the Atacama Desert in Chile used for observing the cosmic microwave background. It collects millimeter-wave data, which is crucial for studying objects like asteroids by measuring their faint thermal emission.
Depth-1 Maps
These are relatively shallow images created from ACT depth-1 maps. They are derived using a modified maximum-likelihood procedure to measure asteroid fluxes directly from the raw ACT data, helping to isolate the signal of small objects.
Normalized Flux
Flux measurements are normalized by the expected flux under the Standard Thermal Model (Rayleigh-Jeans limit). This normalization corrects for variations in distance and observing angle between different depth-1 maps, allowing for consistent comparison of asteroid fluxes.
Light Curves
Light curves are plots showing the measured flux of an asteroid as a function of time. This database provides the necessary data to generate light curves across different ACT arrays, which helps researchers understand how the millimeter flux changes with rotation.

Terminology used across episodes

This episode discusses

The paper

The Atacama Cosmology Telescope: Release of A databaSe of millimeTeR ObservatioNs of Asteroids Using acT · Read on arXiv

Ricco C. Venterea, John Orlowski-Scherer, Nicholas Battaglia, Sigurd Naess, Steve K. Choi, Allen Foster, Joseph Golec, Jeffrey J. McMahon, Bruce Partridge,  Cristobal Sif á onຟⴘ and Edward J. Wollack

Department of Astronomy, Cornell University · Cornell Center for Astrophysics and Planetary Science, Cornell University · Department of Physics and Astronomy, University of California, Riverside · Department of Physics and Astronomy, University of Pennsylvania · Institute of Theoretical Astrophysics, University of Oslo · Joseph Henry Laboratories of Physics, Princeton University · Department of Physics, University of Chicago · Kavli Institute for Cosmological Physics, University of Chicago · Department of Astronomy and Astrophysics, University of Chicago · Department of Physics and Astronomy, Haverford College · ¡nstituto de F༿ica, Pontificia Universidad Cat༻lica de Valparaຑso

We present A databaSe of millimeTeR ObservatioNs of Asteroids Using acT hosted on Amazon Web Services, Inc. (AWS) in the form of a public Amazon Simple Storage Service (S3) bucket. This bucket is an Amazon cloud storage database containing flux measurements for a group of asteroids at millimeter (mm) wavelengths. These measurements were collected by the Atacama Cosmology Telescope (ACT) from 2017 to 2021 in frequency bands centered near 90, 150, and 220 GHz. The database contains observation times, normalized flux values, and associated error bars for 170 asteroids above a signal-to-noise ratio of 5 for a single frequency band over the stacked co-added maps. We provide an example in generating light curves with this database. We also present a Jupyter notebook to serve as a reference guide when using the S3 bucket. The container and notebook are publicly available in a GitHub repository.

Transcript

Introduction to the show: ident: Astrophysics Radio. Generated commentary on the latest astrophysics papers.

Vera: I'm Vera.

Jocelyn: And I'm Jocelyn, here with Subrahmanyan.

Vera: We're looking at the paper: "The Atacama Cosmology Telescope".

Jocelyn: Here's the gist of the paper. We present A databaSe of millimeTeR ObservatioNs of Asteroids Using acT (ASTRONAUT) hosted on Amazon Web Services, Inc.

Vera: (AWS) in the form of a public Amazon Simple Storage Service (S3) bucket This database is an Amazon cloud storage database containing flux measurements for a group of asteroids at millimeter (mm) wavelengths These measurements were collected by the Atacama Cosmology Telescope (ACT) from 2017 to 2021 in frequency bands centered near 90, 150, and 220 GHz The ASTRONAUT database contains observation times, normalized flux values, and associated error bars for 170 asteroids above a signal-to-noise ratio of 5 for a single frequency band over the stacked co-added maps Data Acquisition and Source The data presented is sourced from observations made by the Atacama Cosmology Telescope (ACT) during the period of 2017 to 2021 ACT was a 6 m off-axis Gregorian telescope located in the Atacama Desert in Chile, predominantly used for millimeter observations of the cosmic microwave background between 2007 to 2022 ACT made CMB observations in six frequency bands: f030, f040, f090, f150, f228, and f284 GHz The database specifically contains observations of asteroids from the f090, f150, and f228 GHz channels during 2017-2021 These three bands are used because maps do not exist for 30 and 40 GHz, while 284 GHz observations were done on small patches of the sky, which makes finding asteroids extremely difficult Data Processing Methodology The measurement process involves several steps to derive the final flux data from ACT depth-1 maps ACT maps the sky by scanning at constant elevation while the sky drifts past, resulting in a relatively shallowly exposed image called a “depth-1” map in ACT Data Release 6, which forms the basis of this analysis The depth-1 maps are made using a modified version of the maximum-likelihood procedure used for the standard ACT maps with fewer conjugate gradient steps We measure the asteroid fluxes from the depth-1 maps following Orlowski-Scherer et al.

Jocelyn: (2024) The depth-1 maps are matched filtered for point sources, which cuts out atmospheric noise scales as well as scales smaller than the beam size Orlowski-Scherer et al.

Vera: (2024) then create small stamps of depth-1 maps using the JPL Horizons Application Programming Interface (API) Once these asteroids are centered, measuring the flux corresponds to evaluating the matched-filter flux map value at the location of the asteroid on a single depth-1 stamp The flux error is calculated from a flux uncertainty map Systematic effects, such as the beam size, are also added as an additional uncertainty in the final flux values as described in OrlowskiScherer et al.

Paper summary: Vera: To summarize "The Atacama Cosmology Telescope: Release of A databaSe of millimeTeR ObservatioNs of Asteroids Using acT," the authors present a database containing time, normalized flux, flux uncertainty, and weighting factors for one hundred seventy asteroid observations in the millimeter wavelengths.

Jocelyn: They collected this data from the Atacama Cosmology Telescope between two thousand seventeen and two thousand twenty-one using frequency bands centered near ninety-eight one hundred fifty and two hundred twenty-eight gigahertz <ref:2508.18300#pg3>.

Vera: The thesis is that they've compiled this data into a public Amazon S3 bucket accessible via python scripts and Jupyter Notebooks.

Subrahmanyan: The paper claims that these data products are freely available for anyone to query for specific array, frequency, and asteroid combinations.

Jocelyn: They describe the general features of the container, including the various data products they provide, like flux density sensitivities and beam areas supported by this database (Naess et al. two thousand twenty-five) <ref:2508.18300#pg1>.

Vera: They also stress that depth-one maps are formed by scanning at a constant elevation while the sky drifts past, which results in a relatively shallowly exposed image called a "depth-one" map in ACT Data Release six and this forms the basis of their analysis (Naess et al <ref:2508.18300#pg1>. two thousand twenty-five) <ref:2508.18300#pg1>.

Jocelyn: The method involves using a modified version of the maximum-likelihood procedure with fewer conjugate gradient steps to make these depth-one maps.

Vera: Then they measure asteroid fluxes from these depth-one maps following Orlowski-Scherer et al. two thousand twenty-four and they match filter for point sources, cutting out atmospheric noise scales as well as scales smaller than the beam size (Orlowski-Scherer et al <ref:2508.18300#pg1>. two thousand twenty-four) <ref:2508.18300#pg1>.

Subrahmanyan: The flux error is calculated from a flux uncertainty map, and systematic effects like the beam size are also added in as an additional uncertainty in the final flux values (OrlowskiScherer et al. two thousand twenty-four) <ref:2508.18300#pg1>.

Jocelyn: The data product format itself returns the normalized flux, flux error, weights, and observation times in a FITS file named name lc arr freq.fits for each specific query.

Conclusion: Vera: So looking at "The Atacama Cosmology Telescope: Release of A databaSe of millimeTeR ObservatioNs of Asteroids Using acT," the authors present a database with time, normalized flux, flux uncertainty, and weighting factors for one hundred seventy asteroid observations in the millimeter wavelengths.

Jocelyn: They put this data into a public Amazon S3 bucket where users can access it using python scripts or Jupyter Notebooks to create light curve plots.

Vera: The implication is that this work makes these millimeter measurements of asteroids much more accessible, moving them out of just the research papers and into a usable database.

Subrahmanyan: For cosmology, I see this as a way to build up multi-observatory light curves across ACT, SPT, and ALMA.

Jocelyn: And for understanding the rotation of these asteroids, calculating phase curves becomes possible because of this data structure.

Vera: Overall, it’s about providing a standardized set of data products that lets the community study asteroid flux as a function of time and other parameters.

More episodes

← Home