The ASPIICS solar coronagraph aboard the Proba-3 formation flying mission. Scientific objectives and instrument design
summary
The gist
The ASPIICS (Association of Spacecraft for Polarimetric and Imaging Investigation of the Corona of the Sun) coronagraph is aboard ESA's Proba-3 mission, launched on December 5, 2024.
In short
The ASPIICS coronagraph, aboard ESA's Proba-3 mission, uses a unique two-spacecraft formation to observe the inner solar corona near the limb ($1.099 R_{\odot}$). This design provides unprecedented views of quiescent coronal processes and CME physics by bridging observational gaps between EUV imagers and traditional occulted coronagraphs.
Key concepts
- ASPIICS
- This is a coronagraph aboard Proba-3 using two spacecraft in a precise formation. One spacecraft carries the telescope, while the other holds an external occulter. This setup achieves a very long distance between the occulter and telescope, allowing observations of inner corona conditions under eclipse-like settings.
- External Occulted Coronagraph
- This is an instrument design where a physical object (the external occulter) casts a shadow onto the main telescope's view. ASPIICS uses this to block stray light, offering high-contrast images of the solar corona, particularly near the sun's limb and in eclipse conditions.
- Spectral Capabilities
- ASPIICS captures data across multiple wavelengths. It includes a wideband channel around 5510 Å for the coronal continuum, plus three polarimetric channels ($0^ ext{o}, 60^ ext{o}, 120^ ext{o}$). Narrowband channels target specific emissions like $\text{Fe XIV}$ (hot corona) and $\text{He I D3}$ (prominences).
- Post-CME Current Sheets
- The instrument's high resolution and speed allow scientists to study structures left behind after Coronal Mass Ejections. By measuring plasma density through polarization brightness along these sheets, researchers can determine temperature and density variations in the low corona.
Terminology used across episodes
This episode discusses
- The ASPIICS solar coronagraph aboard the Proba-3 formation flying mission. Scientific objectives and instrument design · Paper Radio
The paper
The ASPIICS solar coronagraph aboard the Proba-3 formation flying mission. Scientific objectives and instrument design · Read on arXiv
A. N. Zhukov, C. Thizy, D. Galano, B. Bourgoignie, L. Dolla, C. Jean, B. Nicula, S. Shestov, C. Galy, R., Rougeot
Solar–Terrestrial Centre of Excellence — SIDC, Royal Observatory of Belgium · Centre Spatial de Liège, Université de Liège · European Space Research and Technology Centre, European Space Agency · Laboratoire Atmosphères et Observations Spatiales · National Institute for Astrophysics, Astrophysical Observatory of Torino · Astronomical Institute of the Czech Academy of Sciences · Max Planck Institute for Solar System Research · Institute of Geodynamics of the Romanian Academy · Astronomical Institute, University of Wrocław · University of Athens, Panepistimiopolis · Institut d’Astrophysique de Paris, Paris, France · Applied Physics Laboratory, Johns Hopkins University USA · IRFM, CEA Saint Paul lez Durance France · National Institute for Research & Development in Microtechnologies Bucharest Romania · PCO S.A. Warsaw Poland · Southwest Research Institute Boulder Colorado USA · High Altitude Observatory, National Center for Atmospheric Research Boulder Colorado USA
We describe the scientific objectives and instrument design of the ASPIICS coronagraph launched aboard the Proba-3 mission of the European Space Agency (ESA) on 5 December 2024. Proba-3 consists of two spacecraft in a highly elliptical orbit around the Earth. One spacecraft carries the telescope, and the external occulter is mounted on the second spacecraft. The two spacecraft fly in a precise formation during 6 hours out of 19.63 hour orbit, together forming a giant solar coronagraph called ASPIICS (Association of Spacecraft for Polarimetric and Imaging Investigation of the Corona of the Sun). Very long distance between the external occulter and the telescope (around 144 m) represents an increase of two orders of magnitude compared to classical externally occulted solar coronagraphs. This allows us to observe the inner corona in eclipse-like conditions, i.e. close to the solar limb (down to 1.099 Rs) and with very low straylight. ASPIICS will provide a new perspective on the inner solar corona that will help solve several outstanding problems in solar physics, such as the origin of the slow solar wind and physical mechanism of coronal mass ejections.
DOI: 10.1051/0004-6361/202557026
Transcript
Introduction to the show: ident: Astrophysics Radio. Generated commentary on the latest astrophysics papers.
Vera: We're looking at the paper: "The ASPIICS solar coronagraph aboard the Proba-3 formation flying mission. Scientific objectives and instrument design".
Jocelyn: Here's the gist of the paper. The ASPIICS (Association of Spacecraft for Polarimetric and Imaging Investigation of the Corona of the Sun) coronagraph is aboard ESA's Proba-3 mission, launched on December 5, 2024.
Vera: Proba-3 utilizes two spacecraft in a highly elliptical orbit around Earth; one carries the telescope and the external occulter is mounted on the second spacecraft.
Jocelyn: These spacecraft fly in a precise formation for six hours out of every 19.63-hour orbit, forming ASPIICS.
Vera: A key feature is the very long distance between the external occulter and the telescope (approximately 144 m), which offers an increase of two orders of magnitude compared to classical externally occulted solar coronagraphs.
Paper summary: Vera: Looking at "The ASPIICS solar coronagraph aboard the Proba-three formation flying mission <ref:2509.00253#pg1,The ASPIICS solar coronagraph aboard the Proba-3 formation flying mission>. Scientific objectives and instrument design" again, this paper really hammers home why this specific instrument needed to be built with that particular configuration.
Jocelyn: I think the main point is that by using two spacecraft in a precise formation for six hours out of every nineteen point six three hour orbit, they get a unique observational setup.
Subrahmanyan: That formation flying setup allows them to achieve that long separation between the external occulter and the telescope, which is what gives them that massive increase in observational power.
Vera: And that separation isn't just a number; it enables observations of the inner corona near one point per solar radius, down to one point zero nine nine R with very low straylight <ref:2509.00253#pg1>.
Jocelyn: So the final implication is that this instrument gives us a direct look at the processes governing the quiescent solar corona and how they lead into eruptive events like CMEs.
Subrahmanyan: It provides a way to understand the physics of coronal heating and solar wind acceleration mechanisms by studying these structures on different scales.
Vera: It’s about bridging the gap between what we see in EUV imagers and what we used to see with classical external occulted coronagraphs.
Jocelyn: The ASPIICS mission, as described here, is designed to be a key instrument for observing the solar corona in white light and specific narrowband emission lines simultaneously.
Subrahmanyan: It’s not just about taking pictures; it’s about measuring plasma densities and temperatures along post-CME current sheets which are important for understanding shock acceleration.
Vera: The authors are laying out a solid path for future work, suggesting that the Level three derived products will be crucial for answering the complex questions they set out.
Jocelyn: They’ve clearly defined the scientific objectives and designed an instrument to meet those goals in a way that offers a new perspective on solar dynamics.
Conclusion: Vera: So we’ve been talking about how this ASPIICS instrument is set up on that Proba-three formation flying mission, and now we’re going to wrap up what the authors are saying about it.
Jocelyn: They're looking at the title of the paper, "The ASPIICS solar coronagraph aboard the Proba-three formation flying mission. Scientific objectives and instrument design," and they really want us to see what this setup means for space weather studies.
Subrahmanyan: It boils down to them showing exactly how they designed this coronagraph—the physical separation of the telescope from the occulter—to get those specific observations of the inner corona near one point per solar radius.
Vera: That long distance is key, because it lets them look at things like CME physics in a kind of eclipse-like setting with very little straylight interfering.
Jocelyn: So what’s the big picture here? It’s about bridging that gap between lower energy imagers and those older coronagraph designs to really see the solar corona from one point zero nine nine solar radii out to three solar radii in white light.
Subrahmanyan: For the bigger picture, they are trying to figure out how the corona heats up on different scales, which is a huge puzzle for understanding how we get those slow solar wind streams and coronal mass ejections moving in the first place.
Vera: It’s also directly tied to understanding those eruptive events themselves—how CMEs start up and accelerate in that low corona region, connecting it to what’s happening on the Sun's surface.
Jocelyn: The authors are setting up a way to measure things like plasma density and temperature along post-CME current sheets using their high resolution and the polarimetry they get from the measurements.
Subrahmanyan: They are pushing for those specific measurements to give us better constraints on the physics of how shocks form in this region, which is what drives much of the space weather we observe down here on Earth.
Vera: It seems like this whole design is built to provide a novel perspective that combines imaging and polarization data to constrain the physical processes happening right at the edge of the Sun's atmosphere.
Jocelyn: Exactly, it’s about getting a multi-faceted view—seeing structure formation and acceleration simultaneously across different wavelengths.
Subrahmanyan: So this work is setting up a foundation for future studies that can link these coronal structures directly to observable solar wind speeds and shock physics.
More episodes
- 2607.08835-Hybrid Simulations of Proton Acceleration at Oblique High- beta Shocks
- 2606.29552-Improving the Precision of Line-by-Line Radial Velocities: A Data-Driven Iterative Algorithm for Spectral Line Selection
- 2609.05312-Evidence for LP 890-9d via Transit Timing Variations
- 2609.10319-Extending the Little Red Dot population at intermediate redshift with VIPERS
- 2611.14233-Probing for anisotropies at different angular scales in the arrival directions of the cosmic rays detected at the Pierre Auger Observatory
- 2610.21722-Hydrostatic Equilibrium Estimate of the Fuzzy Dark Matter Mass from Dwarf Spheroidals: Method and Systematics
- 2610.40550-An Empirically Calibrated [C II] Luminosity-Halo Mass Relation for Line Intensity Mapping
- 2607.27328-PANTERA. I. Hunting for the Most Metal-Rich Stars in the Solar Neighborhood with High-Resolution Spectroscopy
- 2607.09850-Low-hard to high-soft spectral state transitions in the faintest early-X-ray-detected optical tidal disruption event TDE 2025aarm
- 2611.14028-Constraints on Lorentz Invariance Violation from PeV Gamma Rays of Cygnus X-3 Observed by LHAASO