Optimizing Chern Bands for Moore-Read States: A Parent Hamiltonian Approach

arXiv:2611.17188 · cond-mat.str-el · Submitted 2026-11-12 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.

Kai: We're looking at the paper: "Optimizing Chern Bands for Moore-Read States".

Mira: Here's the gist of the paper. The paper proposes a framework to optimize interactions to favor the non-Abelian Moore-Read state by comparing band-projected three-particle spectra against that of the Moore-Read parent Hamiltonian The approach is applied to Landau levels and the Chern bands of twisted MoTe2 Optimizing Interaction Criteria The authors introduce a criterion for optimizing band-projected interactions to favor the non-Abelian Moore–Read state that goes beyond n = 1 LL mimicry This involves comparing the three-particle spectrum of a projected interaction directly to that of the Moore-Read parent Hamiltonian by using a three-body generalization of Haldane pseudopotentials and defining a cost function that quantifies proximity to the Moore-Read parent Hamiltonian In LLs, they obtain the three-particle spectrum analytically in terms of the two-body Haldane pseudopotentials and benchmark the cost function using Coulomb interactions projected to LLs with different orbital characters They use this cost criterion as a design principle to engineer two-body interactions favorable to the Moore-Read state and validate the resulting interactions using many-body exact diagonalization (ED), finding spectra consistent with Moore–Read physics.

Kai: Parent Hamiltonian and Three-Body Spectra The paper details the parent Hamiltonian involving a three-body interaction, which is analogous to the fermionic Laughlin state in terms of two-body interactions The Moore-Read state is analogously the exact ground state of a parent Hamiltonian involving a three-body interaction They decompose rotationally invariant pairwise interactions into a sum of projectors onto two-body relative angular momentum states, denoted as Haldane pseudopotentials.

Mira: The three-particle matrix elements are derived from these pseudopotentials and the basis functions provided by Laughlin.

Kai: Cost Function for Optimization A cost function is defined to quantify deviations from the ideal Moore-Read form, specifically penalizing variations within higher angular momentum channels while favoring separation of the L = 3 channel The cost function is expressed as L = 1/N sum max L>3,i wL (UL,i - U¯ U3 - U¯) squared.

Title and authors: Kai: So we're looking at this paper, "Optimizing Chern Bands for Moore–Read States: A Parent Hamiltonian Approach," and what it does is propose a way to optimize interactions to get that non-Abelian Moore–Read state.

Mira: It’s about comparing the three-particle spectrum of an interaction directly against the spectrum of the parent Hamiltonian, which is defined by a three-body interaction, and using a cost function to see how close we are to that ideal Moore–Read limit.

Lev: So it’s essentially setting up an objective function for gradient based searches in the parameter space of two-body interactions because you only need three-particle exact diagonalization calculations to evaluate that cost function efficiently.

Kai: They apply this method first to Landau levels and then extend it to the Chern bands of twisted molybdenum ditelluride, which is a material relevant for these kinds of strongly correlated states.

Mira: The paper introduces a way to optimize band projected interactions that goes beyond just mimicking the one-particle Landau level physics, by using a three body generalization of Haldane pseudopotentials.

Lev: And they define this cost function as something that quantifies how far the three particle matrix elements are from those of the Moore–Read parent Hamiltonian, specifically penalizing variations within higher angular momentum channels while favoring separation in the L equals three channel <ref:2611.17188#pg2>.

Kai: So when they look at Landau levels, they found that the one particle level has the lowest cost, which is consistent with what we already know about non-Abelian fractional quantum Hall physics.

Mira: They used this cost criterion as a design principle to engineer two body interactions that are favorable for the Moore–Read state and then validated those resulting interactions using many body exact diagonalization, finding spectra consistent with Moore–Read physics.

Lev: And they showed that when you do the inverse design of two body interactions, if you use a cutoff of L equals seven for both the two and three body pseudopotentials, you can reproduce the Moore–Read three particle spectrum exactly.

Kai: That’s pretty strong because it means they can actually design a physical interaction to get that specific state.

Mira: They even found that when this engineered interaction is evaluated, it consistently shows the expected Moore–Read even odd ground state degeneracy pattern, with the low energy states being in the same momentum sectors as for one particle Coulomb interactions.

Lev: And they also noted that finite size corrections are small up to L max equals twenty-one when comparing their analytical three body spectrum to their numerical three body exact diagonalization spectrum <ref:2611.17188#pg2>.

Title and authors: Kai: So for someone who only listens, it means they’ve developed a method where you can use an analytical calculation to design an interaction that should yield the Moore–Read state, and then use many-body calculations to check if that design works on real systems like twisted MoTe2.

Mira: The paper also shows how this three particle spectral criterion can be generalized to Chern bands by using form factors derived from band wave functions, which means the quantum geometry of the band itself can modify the three particle spectrum.

Lev: They apply this generalized cost to twisted MoTe2 moire materials, varying things like the twist angle and moire potential strength, and although they identify regions with relatively low cost, many body calculations do not provide compelling evidence for Moore–Read order in those studied regimes.

Kai: The paper also sets up a phase diagram showing the competition between composite Fermi liquid, Moore–Read paired, and charge density wave phases in the space of short range Haldane pseudopotential ratios.

Mira: They suggest that Moore–Read pairing emerges in an intermediate region of this model electron-electron interaction phase space between competing composite Fermi liquid and charge ordered phases.

Lev: It points to the delicacy of stabilizing Moore–Read states because they compete with other correlated phases like composite Fermi liquid and charge density wave states, meaning it has to emerge in a very specific spot.

Kai: The discussion then moves into inverse design optimization, where they demonstrate this procedure by designing two body interactions that reproduce the Moore–Read three particle spectrum exactly if you use a cutoff of L equals seven for both two and three body pseudopotentials.

Mira: This inverse design procedure uses the surrogate quadratic objective, which is equivalent to solving a weighted least squares problem in terms of the coefficients, to find those optimal coefficients c alpha.

Lev: Those resulting coefficients are found to be c alpha equals two pi

forty-nine point three three four, -twenty-seven point three one seven eight, -twenty-seven point four seven four four, four point one eight one six seven, ten point seven seven nine one, -five point two seven zero eight nine, zero point seven zero seven one four eight: and the optimal parameter sigma is zero point six three two one two five for this interaction.

Kai: So the resulting engineered interaction exhibits that expected Moore–Read even odd ground state degeneracy pattern with normalized gaps larger than those of one particle Coulomb interactions for all system sizes studied, and finite size corrections are small up to L max equals twenty-one <ref:2611.17188#pg2>.

Mira: That’s a really concrete result showing that this designed interaction actually has the right correlation structure for the Moore–Read state.

Title and authors: Lev: And they found that the optimized interaction exhibits a well separated six state low energy manifold for an even number of electrons and a twofold degeneracy for an odd number of electrons, which is what you expect.

Kai: So to wrap up this paper, it’s about using analytical computation to design interactions that favor the non-Abelian Moore–Read state by comparing three particle spectra against the parent Hamiltonian.

Mira: The key idea here is that we can use a cost function to guide searches in parameter space and we can generalize this approach to Chern bands using band wave functions, which points toward a spectral approach similar to two particle exact diagonalization.

Lev: And while they find these regions with relatively low cost, the paper concludes that many body calculations do not provide compelling evidence for Moore–Read order in the studied regimes, suggesting it emerges in an intermediate region between other correlated phases.

Kai: It leaves open the possibility of applying this three particle spectral criterion to effective interactions generated by Landau level mixing, which is something we need to keep looking into.

Mira: The paper shows that stabilizing Moore–Read states is not easy because of competition with things like composite Fermi liquid and charge density wave states, so you need that intermediate phase space region.

Lev: I just want to say, the inverse design procedure is powerful; it lets you engineer the interaction to reproduce the ideal spectrum exactly if you use a cutoff of L equals seven.

Kai: Yeah, and that engineering then allows us to see what kind of physical state we are aiming for before we even build hardware.

Mira: It’s about moving from just observing phases in materials like twisted MoTe2 to actually designing the interactions that drive them into the target state.

Lev: The challenge is that while the analytical and inverse design tools are powerful, you still need those three particle exact diagonalization calculations to confirm if it’s physically stable on a real device with finite size effects.

Kai: So for what this paper does, it gives us a blueprint for how we can use spectral comparisons to guide our search for non-Abelian topological order in moire materials.

Mira: It’s a tool that helps us understand the landscape of interaction phase space and where the Moore–Read pairing might actually live.

Lev: We need to see if those engineered interactions are robust enough when you take them onto actual quantum hardware where you can handle those finite size corrections up to L max equals twenty-one <ref:2611.17188#pg2>.

The paper's summary: Kai: So, we're looking at how they use this three particle spectral comparison method to design interactions that favor that non Abelian Moore Read state in twisted MoTe2 systems and what that means for us in experimental setups.

Mira: It boils down to using a cost function derived from comparing the actual three particle spectrum of an interaction against the spectrum of a parent Hamiltonian which itself involves a three body interaction.

Lev: So you use that comparison to create an objective function, which is essentially solving a weighted least squares problem in terms of coefficients alpha, and that lets you do some inverse design.

Kai: The real win here is that they found these engineered interactions can reproduce the Moore Read three particle spectrum exactly if they use a cutoff lambda equal to seven for both the two body and three body pseudopotentials.

Mira: That exact reproduction means when you run many body exact diagonalization on those designed systems, you see the expected even odd ground state degeneracy pattern and normalized gaps larger than what you get from one particle Coulomb interactions.

Lev: And they found that even though this works for small systems, the finite size corrections stay small up to a cutoff lambda equal to twenty one when comparing their analytical three body spectrum to the numerical three body exact diagonalization spectrum.

Kai: So what this means for someone driving or cooking is that you can use an analytical calculation and some AI inverse design to figure out exactly what two body interaction parameters you need before you even start building the physical system.

Mira: But they also looked at the Chern bands of twisted MoTe2, and while they found some regions with low cost, many body calculations didn't show any compelling evidence for Moore Read order in those specific settings.

Lev: That competition is real; you have to be in an intermediate region of the interaction phase space between a composite Fermi liquid and a charge density wave phase for the Moore Read pairing to even have a chance of emerging.

Kai: So we can design the perfect interaction, but we still need those many body calculations to confirm if that engineered state is actually stable enough when you take it onto real quantum hardware.

Mira: That’s the next big question then: how robust are these designed interactions when you run them on actual superconducting circuits or moire materials with finite temperature and noise?

The paper's improvements: Tom: So, we're looking at how they suggest improving this paper by making it more of a design tool for interaction engineering and applying that to different material systems.

Kai: They show that the main improvement is using the analytical computation of two body interactions to directly design those interactions to reproduce the Moore Read three particle spectrum by minimizing that cost function we talked about earlier.

Mira: It’s about moving from just observing what's happening in a material to actually building an objective function for gradient based searches in the parameter space of those two body interactions.

Lev: That means you can use this surrogate quadratic objective, which is essentially solving a weighted least squares problem in terms of coefficients alpha, to find the specific interaction coefficients that yield those desired three particle correlations.

Kai: This is really powerful because it lets you predict what the resulting three particle matrix elements will look like before you even try to synthesize or simulate them on hardware.

Mira: And they also generalized this cost function to Chern bands by using form factors derived from band wave functions, which means the quantum geometry of the band itself can modify that three particle spectrum.

Lev: So you're using a spectral approach similar to how we identify Haldane pseudopotentials from two particle spectra, but now you're accounting for the band structure complexity.

Kai: They applied this generalized cost to twisted molybdenum ditelluride moire materials, changing things like the twist angle and the moire potential strength.

Mira: Although they found some regions with low cost there, it’s important to remember that many body calculations didn't provide any compelling evidence for Moore Read order in those specific regimes.

Lev: That competition between phases is still a big deal; you have to be in an intermediate region between a composite Fermi liquid and a charge density wave phase for the Moore Read pairing to even have a chance of emerging.

Kai: The paper suggests that this three particle spectral criterion can be used as a tool to identify those relevant parameter regimes for stabilizing non Abelian fractional quantum Hall states, even when there's no magnetic field present.

Mira: It leaves open the possibility of applying this technique to effective interactions generated by Landau level mixing, which is something we need to keep looking into for more complex systems.

Lev: The main limitation they flag is that many body calculations still need to be done, and they haven't shown definitive proof of Moore Read order in all those regimes yet.

Kai: So the implication is this: you get a blueprint for how to use spectral comparisons to guide your search for non Abelian topological order in moire materials.

Mira: It’s a tool that helps us understand the landscape of interaction phase space and where the Moore Read pairing might actually live, even if we can't prove it yet on these specific samples.

Lev: We need to see if those designed interactions are robust enough when you take them onto actual quantum hardware where you can handle those finite size corrections up to lambda equal twenty one.

Conclusion: Kai: So we're wrapping up on "Optimizing Chern Bands for Moore Read States: A Parent Hamiltonian Approach" by summarizing how this framework helps us design interactions to favor that non Abelian state in twisted MoTe2.

Mira: Essentially, they show that by using a cost function derived from comparing three particle spectra against the parent Hamiltonian, you can create an objective function for designing two body interactions.

Lev: And if you use AI to do that inverse design, you can get coefficients alpha that reproduce the target spectrum exactly, provided you set a cutoff lambda equal to seven for both the two body and three body pseudopotentials.

Kai: That means we can predict what an interaction should look like before we even try to synthesize it or simulate it on our superconducting qubits.

Mira: But they also found that while they identified regions with low cost in twisted MoTe2, many body calculations did not provide compelling evidence for Moore Read order in those specific settings.

Lev: That competition between phases is real; the paper points out that you have to be in an intermediate region between a composite Fermi liquid and a charge density wave phase for the pairing to even have a chance of emerging.

Kai: So the implication is that we can use this tool to map out where those pairing regions might live, even if we can't prove it yet on these specific moire materials.

Mira: The main limitation they flag is that many body calculations still need to be done to confirm if the engineered states are actually stable when you take them onto real hardware.

Lev: I just want to say that the inverse design procedure is powerful because it lets you engineer the interaction to reproduce the ideal spectrum exactly if you use a cutoff lambda equal to seven.

Kai: Yeah, and that engineering then allows us to see what kind of physical state we are aiming for before we even build hardware.

Mira: It’s about moving from just observing phases in materials like twisted MoTe2 to actually designing the interactions that drive them into the target state.

Lev: The challenge is that while the analytical and inverse design tools are powerful, you still need those many body exact diagonalization calculations to confirm if it's physically stable on a real device with finite size effects up to lambda equal twenty one.

Kai: So for what this paper does, it gives us a blueprint for how we can use spectral comparisons to guide our search for non Abelian topological order in moire materials.

Mira: It’s a tool that helps us understand the landscape of interaction phase space and where the Moore Read pairing might actually live.

Lev: I think the biggest takeaway is that this paper shows us how to move from observation to active design in correlated systems.

Bishoy M. Kousa, Yung-Chun Chao, Jung-Jung Su, Allan H. MacDonald

Department of Physics, The University of Texas at Austin · Department of Electrophysics, National Yang Ming Chiao Tung University

cond-mat.str-el

Submitted: 2026-11-12

Updated: 2026-11-12

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 86/100

The gist: The paper proposes a framework to optimize interactions to favor the non-Abelian Moore-Read state by comparing band-projected three-particle spectra against that of the Moore-Read parent Hamiltonian…

Key concepts

Moore–Read State
A specific type of non-Abelian quantum state that arises from strong electron interactions. It is analogously the exact ground state of a parent Hamiltonian involving a three-body interaction, characterized by unique even-odd ground-state degeneracies.
Haldane Pseudopotentials
These are mathematical tools used to decompose rotationally invariant pairwise interactions into projectors onto specific two-body relative angular momentum states. They form the basis for describing how electrons interact in a system.
Cost Function (L)
A surrogate quadratic objective function used to quantify how close a given set of two-body interactions is to the ideal Moore-Read parent Hamiltonian. It penalizes deviations, specifically favoring separation in higher angular momentum channels.

Terminology

Summary

The paper proposes a framework to optimize interactions to favor the non-Abelian Moore-Read state by comparing band-projected three-particle spectra against that of the Moore-Read parent Hamiltonian The approach is applied to Landau levels and the Chern bands of twisted MoTe2

Optimizing Interaction Criteria

The authors introduce a criterion for optimizing band-projected interactions to favor the non-Abelian Moore–Read state that goes beyond n = 1 LL mimicry This involves comparing the three-particle spectrum of a projected interaction directly to that of the Moore-Read parent Hamiltonian by using a three-body generalization of Haldane pseudopotentials and defining a cost function that quantifies proximity to the Moore-Read parent Hamiltonian In LLs, they obtain the three-particle spectrum analytically in terms of the two-body Haldane pseudopotentials and benchmark the cost function using Coulomb interactions projected to LLs with different orbital characters They use this cost criterion as a design principle to engineer two-body interactions favorable to the Moore-Read state and validate the resulting interactions using many-body exact diagonalization (ED), finding spectra consistent with Moore–Read physics.

Parent Hamiltonian and Three-Body Spectra

The paper details the parent Hamiltonian involving a three-body interaction, which is analogous to the fermionic Laughlin state in terms of two-body interactions The Moore-Read state is analogously the exact ground state of a parent Hamiltonian involving a three-body interaction They decompose rotationally invariant pairwise interactions into a sum of projectors onto two-body relative angular momentum states, denoted as Haldane pseudopotentials. The three-particle matrix elements are derived from these pseudopotentials and the basis functions provided by Laughlin. p. 6

Cost Function for Optimization

A cost function is defined to quantify deviations from the ideal Moore-Read form, specifically penalizing variations within higher angular momentum channels while favoring separation of the L = 3 channel The cost function is expressed as L = 1/N sum max L>3,i wL (UL,i - U¯ U3 - U¯) squared. This surrogate quadratic objective is used to minimize the weighted deviations of the three-particle matrix elements from those of the Moore–Read parent Hamiltonian. p. 9

Generalization to Chern Bands and Results

The three-particle spectral criterion is generalized to Chern bands by using form factors derived from band wave functions, which allows the quantum geometry of the band to modify the three-particle spectrum This generalized cost is applied to twisted MoTe2 moire materials, varying parameters like twist angle and moire potential strength. Although regions with relatively low cost are identified, many-body calculations do not provide compelling evidence for Moore–Read order in the studied regimes. p. 3

Competing Phases at Half Filling

The competition between different correlated phases is illustrated by a schematic phase diagram showing the competition between composite Fermi liquid (CFL), Moore–Read (MR) paired, and charge-density-wave (CDW) phases in the space of short-range Haldane pseudopotential ratios The authors suggest that Moore–Read pairing emerges in an intermediate region of the model electron-electron interaction phase space between competing composite Fermi liquid and charge-ordered phases.

Discussion on Stability

The study indicates that it is not easy to stabilize Moore–Read states, even in Landau levels, due to competition with other correlated phases such as composite Fermi liquid and charge-density-wave states The delicacy of this competition suggests that Moore–Read pairing emerges in an intermediate region of the model electron-electron interaction phase space.

Inverse Design Optimization

The authors demonstrate an inverse design procedure where two-body interactions are designed to reproduce the Moore–Read three-particle spectrum, achieving exact reproduction if a cutoff of L = 7 is used for both two and three body pseudopotentials The resulting engineered interaction consistently exhibits the expected Moore–Read even–odd ground-state degeneracy pattern, with the low-energy states occurring in the same momentum sectors as for n = 1 Coulomb.

Additional Exact Diagonalization Results

Many-body ED calculations confirm that the engineered interaction exhibits the expected Moore–Read even–odd ground-state degeneracy pattern, with normalized gaps larger than those of n = 1 Coulomb for all system sizes studied. The results show that finite-size corrections are small up to Lmax = 21 when comparing the analytical three-body spectrum to the numerical 3-body ED spectrum. p. 2 The optimized interaction exhibits a well-separated six-state low-energy manifold for an even number of electrons and a twofold degeneracy for an odd number of electrons. p. 3

Finding the Optimal Interaction Coefficients

The optimization process involves minimizing the surrogate cost Lsur, which is equivalent to solving a weighted least squares problem in terms of the coefficients cα The resulting coefficients are found to be cα = 2pi[49.334, -27.3178, -27.4744, 4.18167, 10.7791, -5.27089, 0.707148] and the optimal parameter is sigma = 0. p. 9632. The resulting interaction is evaluated using L with the same weights and angular-momentum cutoff used for the Coulomb Landau levels. p. 2

Conclusion on Stabilization

The work concludes that despite identifying regions with relatively low cost, many-body calculations do not provide compelling evidence for Moore–Read order in the regimes studied This finding highlights the challenges of stabilizing this phase in twisted MoTe2. The paper suggests that Moore–Read pairing emerges in an intermediate region of the model electron-electron interaction phase space between competing composite Fermi liquid and charge-ordered phases. p. 4 The work leaves open the possibility of applying the three-particle spectral criterion to effective interactions generated by LL mixing. p. 4

Acknowledgments

BMK acknowledges helpful discussions with Steven Simon, Patrick Ledwith, Ahmed Abouelkomsan, and Xiaohan Wan Numerical exact diagonalization calculations were performed using MomentumED.jl libraries This work was supported by a grant from the Simons Foundation [MPS-TMPS-00884934,AM] and support from the National Science and Technology Council (NSTC) of Taiwan under Grant No. p. 4 114-2112-M-A49-031 and 115-2112-M-A49-025. p. 4

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Analytical computation of two-body interactions can be used to design interactions that favor a non-Abelian Moore Read state by minimizing a cost function derived from comparing bandprojected three-particle spectra directly to that of the Moore Read parent Hamiltonian. This allows for an objective function for gradient based searches in parameter space.

  2. The AI system can perform inverse design of two body interactions by using the surrogate quadratic objective Lsur, which is a weighted least squares problem in terms of matrix elements, to reproduce the Moore Read three particle spectrum exactly or approximately. This procedure determines coefficients c alpha that yield desired three particle correlations.

  3. The system can generalize the cost function to Chern bands by using band wave functions and their form factors to modify the three-particle spectrum, allowing for a spectral approach similar to two particle exact diagonalization spectra used in Haldane pseudopotential identification.

  4. The AI can analyze many body exact diagonalization results from moire materials, such as twisted MoTe2, and use the cost function Lc to identify experimentally relevant parameter regimes favorable for stabilizing non Abelian FCIs in the absence of a magnetic field.

Sources

Related papers