Cup and cap synchronization: higher-order node dynamics from topology

arXiv:2611.16979 · cond-mat.dis-nn, cond-mat.stat-mech, nlin.AO · Submitted 2026-11-12 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Cup and cap synchronization".

Mira: Here's the gist of the paper. Higher-order node-based synchronization can be unified by introducing Cup and Cap Synchronization as an algebraic topological framework that incorporates higher-order network topology to reconcile previously distinct critical behaviors Theoretical Framework Introduction Cup and Cap Synchronization is introduced as a unifying theoretical framework for higher-order node-based dynamics based on topology, adopting cup and cap products as natural algebraic topological operators for describing node-based interactions mediated by higher-order simplices This model describes node-based dynamics mediated by higher-order interactions of arbitrary dimension, studied up to (M + 1)-body interactions with M = 2, 3 (i.e., up to triangles and tetrahedra, respectively) The framework reveals that the same theoretical framework can account for two dynamical and critical behaviors of higher-order synchronization, previously thought to originate from distinct mechanisms Topological Formulation The cup and cap products are ideal algebraic topological tools able to lift node signals to arbitrary order, thus encompassing limitations of approaches based on the boundary operator that can only be used to lift node signals to the edges The cup product acts as a lifting operator, transforming a pair of cochains into a cochain whose dimension is the sum of the dimensions of the cochains from which it is built The cap product functions as a lowering operator, transforming a given chain to a chain of lower dimension The Cup and Cap Synchronization dynamics lifts the zero cochain indicating the phases of the oscillators up to order M, then lowers it back to the nodes Dynamics for M = 2 For M = 2, the Cup and Cap Synchronization dynamics can be written element-wise as a sum involving pairwise and three-body interactions The higher-order coupling term W

ijk: (θ

i: , θ

j: , θ

k: ) reads W

ijk: (θ

i: , θ

j: , θ

k: ) = sin(θ

k: + θ

j: squared − θ

i: cos(θ

k: ) − θ

j: squared h = 1/2 h X h n0 sin 2−h + 1/2 X h n0 sin−h+1/2θ

k: − 2n−h+1/2θ

j: − 2n−h-1/2θ

i: For h even, the higher-order interactions naturally induce a 4π-periodic phase dynamics, which results in half-integer order parameters that capture additional information about the collective dynamics Critical Behavior and Universality The Cup and Cap Synchronization model displays critical behavior belonging to the universality classes of two existing higher-order Kuramoto-like models, whose distinct critical behaviors were thought to originate from different mechanisms For M = 3, the model can display a critical behavior in a distinct universality class that cannot be observed in models including only pairwise and three-body interactions The inclusion of four-body interactions fundamentally alters the critical properties of the synchronization transition, giving rise to collective phenomena that cannot be observed in models including only interactions mediated by edges and triangles Impact of Four-Body Interactions The M = 3 Cup and Cap Synchronization model includes a four-body interaction term, which is given by W

ijkl: = sin(θ

j: − θ

i: )f1(η

jk: /2)f2(η

kl: /2) This leads to a critical behavior that combines a stable hysteresis loop with a strong dependence on the initial phase bias η on the initial condition in the desynchronization transition The introduction of four-body interactions leads to an unprecedented scenario for the choice of h1 odd and h2 even, where Θ(3) demonstrates that further introduction of four-body interactions can lead to an additional dependence on the initial condition of the desynchronization transition Order Parameters and Phase Diagrams The model involves integer order parameters Rk for k ∈ 1, 2, 3 and half-integer order parameters Xp/2 for p ∈ 1, 3, 5 For M = 2 and even h, the emergence of imaginary half-integer order parameters provides a further manifestation of the richer collective dynamics associated with the 4π-periodic phase space The phase diagrams for M = 3, odd h1 and even h2 reveal the coexistence of a stable hysteresis loop and a dependence of the desynchronization transition on the initial phase bias η The Cup and Cap Synchronization model provides a unified approach to node-based synchronization showing how different critical behaviors previously thought to be irreconcilable can be recast within the same topological framework It establishes algebraic topology as a general theoretical foundation for understanding higher-order node-based collective dynamics, extending its role beyond the previously investigated synchronization of higher-order topological signals The framework opens new directions for investigating how the interplay between topology and interactions of increasing order shapes collective behavior Limiting cases of the M = 2 Cup and Cap Synchronization reveal relations with existing models, such as recasting into the higher-order node-based model with three body term sin(ϕ

k: + ϕ

j: − 2ϕ

i: ) when σ1 = 0 For h = 3, the Cup and Cap Synchronization dynamics can be related to the higher-order node-based synchronization with three body term sin(2ϕ

k: − ϕ

j: − ϕ

i: ) Imaginary Half-Integer Order Parameters The initial configuration where the bias is given by ξ is obtained from the one in which η = ξ by performing the transformation θ → θ + π Under this transformation, we have Xk = Rk → (−1)kRk, and Xp/2 → iXp/2 Therefore owing to the gauge symmetry, Λ can always be chosen real Numerical Integration Details The Cup and Cap Synchronization dynamics is integrated numerically using the fourth-order Runge-Kutta method with time step ∆t = 0.005 The synchronization and desynchronization transitions are investigated by raising and lowering adiabatically the values of the coupling constant σ1 The bias in the initial conditions of the desynchronization transition is implemented by selecting at random a fraction η of the nodes whose phases are drawn from a uniform distribution U((−π, π]) while the remaining 1 − η fraction of the nodes have phases drawn from a uniform distribution U((π, 3π]) Supplementary Results The phase diagrams obtained for M = 2 and Lorentzian intrinsic frequency distribution show that the same distinct critical behavior is observed also for Lorentzian intrinsic frequency distributions for choices of h even and h odd Numerical simulations are in excellent agreement with theoretical predictions for both h even and h odd cases The introduction of four-body interactions leads to a critical behavior that has no equivalent in models where higher-order interactions are only mediated by nodes, edges, and triangles The model displays a set of thresholds δ⋆ = δ⋆(σ2) that determine distinct critical behaviors for the desynchronization transitions Order Parameter Expressions The integer order parameters Rk are given by formulas involving integrals over the distribution of intrinsic frequencies g(ω) The half-integer order parameters Xp/2 require the specification of a further parameter η that carries information about the sign of Ree ip/2θ

j: For Gaussian as well as for the Lorentzian distribution of intrinsic frequencies, these integrals need to be evaluated numerically Critical Properties for M = 3 The saddle-node bifurcation occurs at σn = σSNn when the condition Λ⋆ = f(Λ⋆; ΣSNn) and 1 = f'(Λ⋆; ΣSNn) holds By expanding around this solution, the transition is hybrid with a square root critical behavior with (Λ − Λ⋆) squared scaling linearly with δσn The cusp is found when we have 1 = f'(0; ΣC n) and f'''(0; ΣC n) = 0, f(5)(0; ΣC n) < 0 Unified Critical Behavior The M = 2 Cup and Cap Synchronization model provides a unified framework that displays critical behavior previously thought to arise from distinct mechanisms For h even, the synchronization transition reduces to that obtained for unbiased phase distribution, i.e.

Kai: η = 0.5 for which Xp/2 with p odd is zero For h odd, the desynchronization transition is independent of the initial conditions The M = 3 Cup and Cap Synchronization model displays a critical behavior that has no equivalent in higher-order node-based synchronization models mediated only by nodes, edges, and triangles Discussion The results demonstrate that critical behaviors previously thought to originate from distinct synchronization mechanisms can emerge within the same theoretical framework Cup and Cap Synchronization reveals novel dynamical phenomena that have no equivalent in previously proposed models The inclusion of four-body interactions gives rise to a distinct critical behavior characterized by the coexistence of a stable hysteresis loop and a strong dependence on initial conditions along the desynchronization branch The Cup and Cap Synchronization dynamics can be recast into the higher-order node-based model with three body term sin(2ϕ

k: − ϕ

j: − ϕ

i: ) for h = 3 Modulus rescaling of the coupling constants allows this to be recast into the model proposed in Refs.

24, 25: for every value of σ1 and σ2 Imaginary Half-Integer Order Parameters The dynamics under conditions where the phases are initially biased with probability ξ to be π and 3π with bias given by ξ has the same phase diagram of the standard model with the choice ξ = η as shown in Figure 5 The transformation leads to Xp/2 → iXp/2 Numerical Integration Details All simulations are performed on fully connected networks with N = 104 nodes with normally distributed intrinsic frequencies The equilibration time is chosen to be Teq = 15 and the values of the order parameters are averaged over times Teq ≤ t ≤ Tmax with Tmax = 20 Supplementary Results The phase diagrams show that for h even, the synchronization transition remains continuous and the desynchronization transition has a remarkable dependence on the bias η For h odd, the model displays continuous and discontinuous phase transitions with a thermodynamically stable hysteresis loop Numerical simulations are in excellent agreement with theoretical predictions for both h even and h odd cases The introduction of four-body interactions leads to a critical behavior that has no equivalent in models where higher-order interactions are only mediated by nodes, edges, and triangles The model displays a set of thresholds δ⋆ = δ⋆(σ2) that determine distinct critical behaviors for the desynchronization transitions The results show that the M = 2 Cup and Cap Synchronization model is a unified approach to node-based synchronization showing how different critical behaviors previously thought to be irreconcilable can be recast within the same topological framework Critical Properties for M = 3 The saddle-node bifurcation occurring at σn = σSNn can be found by imposing that for a non zero value of Λ⋆ we have Λ⋆ = f(Λ⋆; ΣSNn), 1 = f'(Λ⋆; ΣSNn), and f'' (Λ⋆; ΣSNn) ≠ 0 By expanding around this solution, the transition is hybrid with a square root critical behavior with (Λ − Λ⋆) squared scaling linearly with δσn The cusp is found when we have 1 = f'(0; ΣC n) and f'''(0; ΣC n) < 0, leading to the critical scaling δΛ ≃ -6ϵ/f'''(0; ΣC n) Discussion The results demonstrate that critical behaviors previously thought to originate from distinct synchronization mechanisms can emerge within the same theoretical framework Cup and Cap Synchronization reveals novel dynamical phenomena that have no equivalent in previously proposed models The inclusion of four-body interactions gives rise to a distinct critical behavior characterized by the coexistence of a stable hysteresis loop and a strong dependence on initial conditions along the desynchronization branch The framework establishes algebraic topology as a general theoretical foundation for understanding higher-order node-based collective dynamics Looking forward, the Cup and Cap Synchronization is a unified theoretical framework that opens new directions for investigating how the interplay between topology and interactions of increasing order shapes collective behavior Limiting cases of the M = 2 Cup and Cap Synchronization reveal relations with existing models, such as recasting into the higher-order node-based model with three body term sin(ϕ

k: + ϕ

j: − 2ϕ

i: ) when σ1 = 0 Modulus rescaling of the coupling constants allows this to be recast into the model proposed in Refs.

Paper summary: Kai: So, this paper, "Cup and cap synchronization: higher-order node dynamics from topology," proposes using algebraic topology to unify how we understand node based synchronization. The main claim is that this framework lets us look at higher order interactions in a way that connects different types of critical behaviors we've seen before <ref:2611.16979#pg1>.

Mira: Exactly, it suggests that by using cup and cap products as mathematical tools, which are from algebraic topology, we can naturally describe node based dynamics mediated by interactions of arbitrary dimension <ref:2611.16979#pg3>. It claims this framework can explain two different critical behaviors of higher order synchronization that we previously thought came from separate mechanisms <ref:2611.16979#pg2>.

Lev: From an engineering side, the paper's focus on unifying these models is interesting because it suggests a single mathematical language might govern what we see in complex networks <ref:2611.16979#pg3>. But it’s important to remember they are only studying interactions up to three body interactions with M equals two or three, depending on the case <ref:2611.16979#pg3>.

Kai: Right, so they're looking at things like triangles and tetrahedra in this context <ref:2611.16979#pg3>. But they go deeper than just those by using cochains and chains to lift the node signals up to order M and then bring them back down <ref:2611.16979#pg3>.

Mira: They describe the cup product as a lifting operator that takes a pair of cochains and makes a higher dimensional one, while the cap product acts as a lowering operator to go back to lower dimensions <ref:2611.16979#pg3>. That’s how they use topology to handle those higher order interactions <ref:2611.16979#pg3>.

Lev: And when they look at the M equals two case, they get a specific coupling term that involves pairwise and three body interactions <ref:2611.16979#pg2>. This leads to some interesting dynamics if the parameter h is even, which results in a four pi periodic phase dynamics <ref:2611.16979#pg2>.

Kai: That four pi periodicity for even h is significant because it means we get half integer order parameters that can capture extra information about the collective motion <ref:2611.16979#pg2>. It shows how topology can give us richer dynamics than just looking at the phases directly <ref:2611.16979#pg2>.

Mira: And when they move to M equals three, the model can exhibit a critical behavior in a separate universality class that you wouldn't see if you only looked at pairwise and three body interactions <ref:2611.16979#pg2>. That's the big claim there about new critical phenomena <ref:2611.16979#pg2>.

Lev: But that dependence on four body interactions is where things get really complex, because it fundamentally alters the critical properties of the synchronization transition <ref:2611.16979#pg3>. It introduces something new that you wouldn't find just by looking at edges and triangles <ref:2611.16979#pg3>.

Kai: What they found is that this four body interaction leads to a critical behavior that combines a stable hysteresis loop with a strong dependence on the initial phase bias η on the initial condition in the desynchronization transition <ref:2611.16979#pg3>. That’s quite specific behavior there <ref:2611.16979#pg3>.

Mira: And they also point out that this depends on the choice of h one and h two, showing that even more four body interactions can lead to an additional dependence on the initial condition in that desynchronization transition <ref:2611.16979#pg3>. It suggests the model is quite flexible with its parameters <ref:2611.16979#pg3>.

Lev: So, they're showing how this topological setup can handle a lot of complexity that simpler models couldn't capture <ref:2611.16979#pg3>. This means the framework is more general than just looking at nodes, edges, and triangles <ref:2611.16979#pg3>.

Conclusion: Kai: So, looking at the full picture of "Cup and cap synchronization: higher-order node dynamics from topology," it seems they’ve succeeded in putting these seemingly different critical behaviors into one theoretical framework <ref:2611.16979#pg2>.

Mira: It really boils down to algebraic topology providing a general foundation for understanding higher order node based collective dynamics, extending its reach beyond just the synchronization of higher order topological signals <ref:2611.16979#pg1>.

Lev: From an error correction standpoint, if this framework can unify these behaviors, it might suggest that we need a more comprehensive model to design robust error correction for real hardware <ref:2611.16979#pg3>.

Kai: They showed that the inclusion of four body interactions creates a distinct critical behavior characterized by a stable hysteresis loop and a strong dependence on initial conditions along the desynchronization branch <ref:2611.16979#pg3>.

Mira: That’s what makes it interesting for me, because it shows that different synchronization mechanisms previously thought to be separate can actually emerge from the same mathematical structure <ref:2611.16979#pg2>.

Lev: It opens new directions for how we investigate how the interplay between topology and interactions of increasing order shapes collective behavior <ref:2611.16979#pg3>.

Runyue Wang, Yuanzhao Zhang, Ginestra Bianconi

School of Mathematical Sciences, Queen Mary University of London · Department of Physics and Astronomy, University of Rochester

cond-mat.dis-nn, cond-mat.stat-mech, nlin.AO

Submitted: 2026-11-12

Updated: 2026-11-12

Comments: 10 pages, 7 figures + SI

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 83/100

The gist: Higher-order node-based synchronization can be unified by introducing Cup and Cap Synchronization as an algebraic topological framework that incorporates higher-order network topology to reconcile…

Key concepts

Cup and Cap Products
These are algebraic topological tools used as natural operators to describe node interactions mediated by higher-order simplices. The cup product acts as a lifting operator, increasing the dimension of cochains, while the cap product functions as a lowering operator, transforming chains to lower dimensions.
Higher-Order Interactions (M=2 and M=3)
The framework describes node dynamics mediated by interactions up to two (pairwise) or three-body interactions. For M=2, it reveals 4π-periodic phase dynamics for even h, while for M=3, the inclusion of four-body interactions introduces a distinct critical behavior not found in simpler models.
Order Parameters (Rk and Xp/2)
The model uses integer order parameters (Rk) and half-integer order parameters (Xp/2). The latter emerge when h is even, reflecting richer dynamics due to the 4π-periodic phase space. These parameters capture specific aspects of the collective synchronization state.
Unified Critical Behavior
The framework unifies critical behaviors previously thought to be from distinct mechanisms. For M=3, the inclusion of four-body interactions leads to a critical behavior characterized by a stable hysteresis loop and dependence on initial conditions, which is unique compared to models limited to nodes, edges, and triangles.

Terminology

Summary

Higher-order node-based synchronization can be unified by introducing Cup and Cap Synchronization as an algebraic topological framework that incorporates higher-order network topology to reconcile previously distinct critical behaviors

Theoretical Framework Introduction

Cup and Cap Synchronization is introduced as a unifying theoretical framework for higher-order node-based dynamics based on topology, adopting cup and cap products as natural algebraic topological operators for describing node-based interactions mediated by higher-order simplices This model describes node-based dynamics mediated by higher-order interactions of arbitrary dimension, studied up to (M + 1)-body interactions with M = 2, 3 (i.e., up to triangles and tetrahedra, respectively) The framework reveals that the same theoretical framework can account for two dynamical and critical behaviors of higher-order synchronization, previously thought to originate from distinct mechanisms

Topological Formulation

The cup and cap products are ideal algebraic topological tools able to lift node signals to arbitrary order, thus encompassing limitations of approaches based on the boundary operator that can only be used to lift node signals to the edges The cup product acts as a lifting operator, transforming a pair of cochains into a cochain whose dimension is the sum of the dimensions of the cochains from which it is built The cap product functions as a lowering operator, transforming a given chain to a chain of lower dimension The Cup and Cap Synchronization dynamics lifts the zero cochain indicating the phases of the oscillators up to order M, then lowers it back to the nodes

Dynamics for M = 2

For M = 2, the Cup and Cap Synchronization dynamics can be written element-wise as a sum involving pairwise and three-body interactions The higher-order coupling term W[ijk](θ[i], θ[j], θ[k]) reads W[ijk](θ[i], θ[j], θ[k]) = sin(θ[k] + θ[j] squared − θ [i] cos(θ [k]) − θ [j] squared h = 1/2 h X h n0 sin 2−h + 1/2 X h n0 sin−h+1/2θ[k] − 2n−h+1/2θ[j] − 2n−h-1/2θ[i] For h even, the higher-order interactions naturally induce a 4π-periodic phase dynamics, which results in half-integer order parameters that capture additional information about the collective dynamics

Critical Behavior and Universality

The Cup and Cap Synchronization model displays critical behavior belonging to the universality classes of two existing higher-order Kuramoto-like models, whose distinct critical behaviors were thought to originate from different mechanisms For M = 3, the model can display a critical behavior in a distinct universality class that cannot be observed in models including only pairwise and three-body interactions The inclusion of four-body interactions fundamentally alters the critical properties of the synchronization transition, giving rise to collective phenomena that cannot be observed in models including only interactions mediated by edges and triangles

Impact of Four-Body Interactions

The M = 3 Cup and Cap Synchronization model includes a four-body interaction term, which is given by W[ijkl] = sin(θ[j] − θ[i])f1(η[jk]/2)f2(η[kl]/2) This leads to a critical behavior that combines a stable hysteresis loop with a strong dependence on the initial phase bias η on the initial condition in the desynchronization transition The introduction of four-body interactions leads to an unprecedented scenario for the choice of h1 odd and h2 even, where Θ(3) demonstrates that further introduction of four-body interactions can lead to an additional dependence on the initial condition of the desynchronization transition

Order Parameters and Phase Diagrams

The model involves integer order parameters Rk for k ∈ 1, 2, 3 and half-integer order parameters Xp/2 for p ∈ 1, 3, 5 For M = 2 and even h, the emergence of imaginary half-integer order parameters provides a further manifestation of the richer collective dynamics associated with the 4π-periodic phase space The phase diagrams for M = 3, odd h1 and even h2 reveal the coexistence of a stable hysteresis loop and a dependence of the desynchronization transition on the initial phase bias η

Conclusion

The Cup and Cap Synchronization model provides a unified approach to node-based synchronization showing how different critical behaviors previously thought to be irreconcilable can be recast within the same topological framework It establishes algebraic topology as a general theoretical foundation for understanding higher-order node-based collective dynamics, extending its role beyond the previously investigated synchronization of higher-order topological signals The framework opens new directions for investigating how the interplay between topology and interactions of increasing order shapes collective behavior

Methods for Limiting Cases

Limiting cases of the M = 2 Cup and Cap Synchronization reveal relations with existing models, such as recasting into the higher-order node-based model with three body term sin(ϕ[k] + ϕ[j] − 2ϕ[i]) when σ1 = 0 For h = 3, the Cup and Cap Synchronization dynamics can be related to the higher-order node-based synchronization with three body term sin(2ϕ[k] − ϕ[j] − ϕ[i])

Imaginary Half-Integer Order Parameters

The initial configuration where the bias is given by ξ is obtained from the one in which η = ξ by performing the transformation θ → θ + π Under this transformation, we have Xk = Rk → (−1)kRk, and Xp/2 → iXp/2 Therefore owing to the gauge symmetry, Λ can always be chosen real

Numerical Integration Details

The Cup and Cap Synchronization dynamics is integrated numerically using the fourth-order Runge-Kutta method with time step ∆t = 0.005 The synchronization and desynchronization transitions are investigated by raising and lowering adiabatically the values of the coupling constant σ1 The bias in the initial conditions of the desynchronization transition is implemented by selecting at random a fraction η of the nodes whose phases are drawn from a uniform distribution U((−π, π]) while the remaining 1 − η fraction of the nodes have phases drawn from a uniform distribution U((π, 3π])

Supplementary Results

The phase diagrams obtained for M = 2 and Lorentzian intrinsic frequency distribution show that the same distinct critical behavior is observed also for Lorentzian intrinsic frequency distributions for choices of h even and h odd Numerical simulations are in excellent agreement with theoretical predictions for both h even and h odd cases The introduction of four-body interactions leads to a critical behavior that has no equivalent in models where higher-order interactions are only mediated by nodes, edges, and triangles The model displays a set of thresholds δ⋆ = δ⋆(σ2) that determine distinct critical behaviors for the desynchronization transitions

Order Parameter Expressions

The integer order parameters Rk are given by formulas involving integrals over the distribution of intrinsic frequencies g(ω) The half-integer order parameters Xp/2 require the specification of a further parameter η that carries information about the sign of Ree ip/2θ[j] For Gaussian as well as for the Lorentzian distribution of intrinsic frequencies, these integrals need to be evaluated numerically

Critical Properties for M = 3

The saddle-node bifurcation occurs at σn = σSNn when the condition Λ⋆ = f(Λ⋆; ΣSNn) and 1 = f'(Λ⋆; ΣSNn) holds By expanding around this solution, the transition is hybrid with a square root critical behavior with (Λ − Λ⋆) squared scaling linearly with δσn The cusp is found when we have 1 = f'(0; ΣC n) and f'''(0; ΣC n) = 0, f(5)(0; ΣC n) < 0

Unified Critical Behavior

The M = 2 Cup and Cap Synchronization model provides a unified framework that displays critical behavior previously thought to arise from distinct mechanisms For h even, the synchronization transition reduces to that obtained for unbiased phase distribution, i.e. η = 0.5 for which Xp/2 with p odd is zero For h odd, the desynchronization transition is independent of the initial conditions The M = 3 Cup and Cap Synchronization model displays a critical behavior that has no equivalent in higher-order node-based synchronization models mediated only by nodes, edges, and triangles

Discussion

The results demonstrate that critical behaviors previously thought to originate from distinct synchronization mechanisms can emerge within the same theoretical framework Cup and Cap Synchronization reveals novel dynamical phenomena that have no equivalent in previously proposed models The inclusion of four-body interactions gives rise to a distinct critical behavior characterized by the coexistence of a stable hysteresis loop and a strong dependence on initial conditions along the desynchronization branch

The Cup and Cap Synchronization dynamics can be recast into the higher-order node-based model with three body term sin(2ϕ[k] − ϕ[j] − ϕ[i]) for h = 3 Modulus rescaling of the coupling constants allows this to be recast into the model proposed in Refs. [24, 25] for every value of σ1 and σ2

The dynamics under conditions where the phases are initially biased with probability ξ to be π and 3π with bias given by ξ has the same phase diagram of the standard model with the choice ξ = η as shown in Figure 5 The transformation leads to Xp/2 → iXp/2

All simulations are performed on fully connected networks with N = 104 nodes with normally distributed intrinsic frequencies The equilibration time is chosen to be Teq = 15 and the values of the order parameters are averaged over times Teq ≤ t ≤ Tmax with Tmax = 20

The phase diagrams show that for h even, the synchronization transition remains continuous and the desynchronization transition has a remarkable dependence on the bias η For h odd, the model displays continuous and discontinuous phase transitions with a thermodynamically stable hysteresis loop Numerical simulations are in excellent agreement with theoretical predictions for both h even and h odd cases The introduction of four-body interactions leads to a critical behavior that has no equivalent in models where higher-order interactions are only mediated by nodes, edges, and triangles The model displays a set of thresholds δ⋆ = δ⋆(σ2) that determine distinct critical behaviors for the desynchronization transitions The results show that the M = 2 Cup and Cap Synchronization model is a unified approach to node-based synchronization showing how different critical behaviors previously thought to be irreconcilable can be recast within the same topological framework

The saddle-node bifurcation occurring at σn = σSNn can be found by imposing that for a non zero value of Λ⋆ we have Λ⋆ = f(Λ⋆; ΣSNn), 1 = f'(Λ⋆; ΣSNn), and f'' (Λ⋆; ΣSNn) ≠ 0 By expanding around this solution, the transition is hybrid with a square root critical behavior with (Λ − Λ⋆) squared scaling linearly with δσn The cusp is found when we have 1 = f'(0; ΣC n) and f'''(0; ΣC n) < 0, leading to the critical scaling δΛ ≃ -6ϵ/f'''(0; ΣC n)

The results demonstrate that critical behaviors previously thought to originate from distinct synchronization mechanisms can emerge within the same theoretical framework Cup and Cap Synchronization reveals novel dynamical phenomena that have no equivalent in previously proposed models The inclusion of four-body interactions gives rise to a distinct critical behavior characterized by the coexistence of a stable hysteresis loop and a strong dependence on initial conditions along the desynchronization branch The framework establishes algebraic topology as a general theoretical foundation for understanding higher-order node-based collective dynamics Looking forward, the Cup and Cap Synchronization is a unified theoretical framework that opens new directions for investigating how the interplay between topology and interactions of increasing order shapes collective behavior

Limiting cases of the M = 2 Cup and Cap Synchronization reveal relations with existing models, such as recasting into the higher-order node-based model with three body term sin(ϕ[k] + ϕ[j] − 2ϕ[i]) when σ1 = 0 Modulus rescaling of the coupling constants allows this to be recast into the model proposed in Refs.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI system can model higher-order node-based synchronization dynamics by incorporating algebraic topology using cup and cap products to describe node signals up to arbitrary order M. This allows the system to capture collective phenomena that cannot be observed in models including only interactions mediated by edges and triangles, such as the critical behavior arising from four-body interactions.

  2. Improved AI system can distinguish between two previously thought distinct mechanisms of discontinuous synchronization transitions by showing that Cup and Cap Synchronization displays critical behavior belonging to the universality classes of two existing higher-order Kuramoto-like models. This provides a unifying theoretical framework for understanding these different behaviors.

  3. Improved AI system can identify novel dynamical features beyond previously proposed models, such as the 4pi periodicity associated with half-integer order parameters and their sensitivity to initial phase bias, which has no counterpart in earlier models. This allows the system to capture additional information about collective dynamics.

  4. Improved AI system can analyze the impact of including four-body interactions on critical properties by demonstrating that this inclusion can fundamentally alter synchronization transitions, giving rise to collective phenomena that cannot be observed in models including only interactions mediated by edges and triangles.

  5. Improved AI system can predict the existence and nature of critical behavior for different interaction orders (M=2 versus M=3) based on the parity of interaction terms (h1 and h2). This capability allows for classification of dynamical regimes based on how four-body interactions modify the underlying topological structure.

Related papers