Low-lying doubly charmed strange baryons via QCD sum rules
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.
Kai: We're looking at the paper: "Low-lying doubly charmed strange baryons via QCD sum rules".
Mira: Here's the gist of the paper. Low-lying doubly heavy baryons and their radiative transitions are investigated using QCD sum rules and light-cone sum rules to provide theoretical guidance for future experimental searches By constructing mixed interpolating currents, the study obtains masses for low-lying doubly heavy baryons including MΞcc = 3.62+0.14−0.15 GeV, MΞ∗cc = 3.72+0.14−0.13 GeV, Momegacc = 3.72+0.13−0.15 GeV, and Momega∗cc = 3.82+0.13−0.15 GeV These extracted masses are compatible with the observed Ξcc and omegacc states and predict hyperfine splittings of about 108 MeV and 99 MeV for the Ξcc and omegacc systems, respectively Using these inputs, the LCSR for electromagnetic form factors is derived to obtain radiative widths such as Γ(Ξ∗++cc → Ξ++cc γ) = 5.25+8.57−3.62 keV and Γ(omega∗+cc → omega++ccγ) = 0.41+0.67−0.30 keV Mass Analyses from QCD Sum Rules The investigation systematically examines local interpolating currents for S-wave doubly heavy baryons, considering ground-state systems Q1Q2q where Q is a heavy quark and q is a light quark The total angular momentum J is obtained by coupling the three quark spins, defined as J = sQ1 ⊗ sQ1 ⊗ sq = sq ⊗ jl = sQ2 ⊗ j3 Three types of interpolating currents B1(x), B2(x), and B3(x) are considered, with specific Lorentz structures like η3α and η4α being constructed for J P = 3/2+ states The mass of the state is extracted by evaluating the two-point correlation function at both hadronic and quark–gluon levels using a Borel transformation Electromagnetic Transitions from Light-Cone Sum Rules The radiative transitions B∗(3/2+) → B(1/2+)γ are studied using light-cone sum rules to express the transition magnetic moment and radiative decay width in terms of magnetic-dipole (M1) and electric-quadrupole (E2) form factors, GM1 and GE2 The invariant form factors G1 and G2 are isolated by decomposing the transition tensor into two independent Lorentz structures, T1 and T2 The final radiative decay width is then expressed in terms of these multipole form factors as Γ(B∗ → Bγ) = α16 (M∗2B − M2B)3 / M∗3B M2B GM1(0)2 + 3GE2(0)2 Comparison with other approaches The numerical results for the radiative widths are compared with predictions from lattice QCD, heavy-baryon chiral perturbation theory (HBChPT), and nonrelativistic quark models (NRQM) The central values of our radiative widths are smaller than both the HBChPT predictions and the relativistic constituent quark-model results of Branz et al.
Kai: In contrast, for the three doubly charmed channels, our central values are larger than the lattice-QCD results The relative sign of the light- and heavy-quark contributions is important as it determines the sign of the total transition moment The full results for GM1(0), GE2(0), and µ are obtained by combining photon emission through light-quark distribution amplitudes and direct emission from heavy-quark lines For the Ξ∗+cc → Ξ++ccγ and omega∗+cc → omega++ccγ transitions, the GM1(0) values have signs opposite to those reported in the lattice-QCD calculation The heavy-quark contribution is non-negligible because it is of the same order of magnitude as the light-sector contribution and substantially affects the total form factor A future analysis using a double Borel transformation, together with a detailed separation of the light- and heavy-quark photon-emission contributions, would help establish more robust predictions for the transition moments and decay widths The E2 form factors are much smaller than the M1 form factors in all six channels, meaning uncertainties in the widths are primarily associated with GM1(0) TABLE III: The results of multipole form factors GM1(0) and GE2(0), transition magnetic moments µ (in units of µN), and radiative widths Γ (in keV).
Mira: We use the magnetic-dipole form factors G l M1(0) and G h M1(0) to reflect the contributions through the light-quark light-cone distribution amplitudes and direct emission from heavy-quark lines separately The E2 form factors are much smaller than the M1 form factors in all six channels Consequently, uncertainties in the widths are primarily associated with GM1(0), including the relative contributions of light- and heavy-quark, and with the baryon masses The results are summarized in Table III TABLE IV: Comparison of transition magnetic moments and radiative widths across theoretical approaches.
Kai: Each entry gives (µ/µN, Γ/keV) For the six ground-state transitions B∗(3/2+) → B(1/2+)γ, the central values of our radiative widths are smaller than both the HBChPT predictions and the relativistic constituent quark-model results of Branz et al.
Title and authors: Kai: So, we're looking at this paper by Hui-Min Yang, Hua-Xing Chen, and Xuan Luo. It’s titled "Low-lying doubly charmed strange baryons via QCD sum rules". Basically, they are using QCD sum rules and light cone sum rules to figure out the masses of low-lying doubly heavy baryons like MXi cc and Omega cc.
Mira: Right, so it's about finding those specific low-energy states for these doubly charmed strange baryons. It’s important because we need to know the ground state masses before we can even talk about how they decay or transition between different states.
Lev: I wonder if the sum rules are robust enough for this, considering how messy the QCD vacuum is when you introduce these heavy quarks?
Kai: That's a good point, Lev. The paper tackles this by constructing mixed interpolating currents to get those masses. They extract values like MXi cc at three point six two plus zero point one four minus zero point one five GeV, and they do the same for MXi star cc, Omega cc, and Omega star cc.
Mira: Those extracted masses are said to be compatible with what we see experimentally for the Xi cc and Omega cc states. But they also predict hyperfine splittings of about one hundred eight meV for the Xi cc system, and nine hundred ninety meV for the Omega cc system.
Lev: One hundred eighty meV is a pretty specific prediction. That tells us something about how strongly those quark spins interact at that energy scale.
Kai: Exactly. Then they take those masses and use them to derive light cone sum rules for the electromagnetic form factors, which gives them radiative widths like five point two five plus eight point five seven minus three point six two keV for the Xi star plus cc transition and zero point four one plus zero point six seven minus zero point three zero keV for the Omega star plus cc transition.
Mira: Those radiative widths are pretty small, which is what we expect for these types of transitions, but they are specific predictions that experimentalists can test.
Lev: And the caveat there is that these results come from using those calculated masses as inputs into the LCSR calculations. If the mass extraction itself has a big error, it propagates into those widths too.
Title and authors: Kai: Right, so the paper focuses on getting those masses right first, and then using them for the more complex stuff like form factors and widths. It’s a systematic approach to mapping out this sector of physics.
Mira: And they explicitly mention that they construct these mixed interpolating currents because diagonal correlators alone aren't enough for the mass extraction part. That’s a key methodological improvement they are highlighting.
Lev: Using those mixed currents, I think it helps constrain the various couplings better than just sticking to one type of current. It means you’re not missing some important dynamics by only looking at one structure.
Kai: And then when they move on to the light cone sum rules, they break down the transition tensor into two independent Lorentz structures, T1 and T2. That lets them calculate the invariant form factors G1 and G2 separately.
Mira: Separating them is smart because it lets you see the magnetic dipole contribution, GM1 zero, and the electric quadrupole contribution GE2 zero in a more controlled way.
Lev: I agree, isolating those two terms is necessary because they often have very different dependencies on the underlying quark dynamics.
Kai: They then put those into an equation for the radiative decay width that looks like: Gamma equals alpha one six times M star squared B minus M two B cubed over M star cubed B M two B times GM1 zero squared plus three GE2 zero squared.
Mira: That is a standard way to express the width in terms of those multipole form factors, GM1 zero and GE2 zero. It’s the tool they use to get the final numbers for things like Gamma(Xi star plus cc over Xi plus cc gamma).
Lev: So, when they compare these results against lattice QCD and other models, there are some interesting tensions. The central values for radiative widths are smaller than what heavy baryon chiral perturbation theory predicts, but larger than the relativistic constituent quark-model results from Branz et al.
Kai: That's a big comparison because it shows where our different theoretical tools agree or disagree on the dynamics involved. And they also note that for the three doubly charmed channels, their central values are larger than lattice QCD results for those specific channels.
Title and authors: Mira: The paper points out that the relative signs of the light- and heavy-quark contributions in GM1 zero can actually affect the sign of the total transition moment, which is something we have to be careful about when comparing absolute values.
Lev: And they flag that because both the light-quark and heavy-quark contributions are roughly the same order of magnitude, it substantially affects the total form factor calculation.
Kai: So what do we get from this? They get these form factors GM1 zero and GE2 zero, and they also get a transition magnetic moment mu. The uncertainty in those widths is primarily tied to GM1 zero, including how much light-quark and heavy-quark stuff contributes there, plus the baryon masses themselves.
Mira: So overall, the main implication is that this paper gives us a set of specific predictions for these radiative decays based on a systematic approach using sum rules and LCSR. It sets a benchmark against other calculations like lattice QCD.
Lev: The limitations they mention are that they don't do the full double Borel transformation yet, and they haven't fully separated the light-quark and heavy-quark photon emission contributions. That means for a really tight prediction on those transition moments, more work is needed to separate those parts cleanly.
Kai: So, to wrap up on this paper by Hui-Min Yang, Hua-Xing Chen, and Xuan Luo: they systematically investigate the masses of low-lying doubly heavy baryons using mixed interpolating currents in QCD sum rules and light cone sum rules. They find masses like MXi cc at three point six two plus zero point one four minus zero point one five GeV, and they derive radiative widths such as Gamma(Xi star plus cc over Xi plus cc gamma) equals five point two five plus eight point five seven minus three point six two keV.
Mira: And the conclusion is that these extracted masses are compatible with observed states and their calculated radiative widths provide a benchmark against lattice QCD and other models, even though there are some differences in the central values.
Lev: For me, it’s about establishing a reliable framework for calculating these things using sum rules before we try to run them on real hardware where the noise is way worse.
Kai: Exactly. So we’ll be keeping an eye on these results as the experimental searches continue at places like LHCb and Belle II. Next up, we have another paper on M1 radiative transitions in the B c system after the Bc one observation.
The paper's summary: Kai: So, this paper summarizes their work on these low-lying doubly charmed strange baryons using QCD sum rules and light cone sum rules to predict their masses and radiative transitions.
Mira: Right, so they're taking those calculated masses—like three point six two plus zero point one four minus zero point one five gigaelectron volts for the MXi cc state—and checking if those numbers actually match what we see experimentally for the Xi cc and Omega cc states.
Lev: From my side, I’m looking at how much of that mass extraction depends on the input spectral densities they use. If those starting points are off by a bit, it shifts everything downstream to the form factors and widths.
Kai: Exactly. And they show that these extracted masses are compatible with what’s already observed for those states, but they also predict hyperfine splittings—about one hundred eighty meV for the Xi cc system and nine hundred ninety meV for the Omega cc system.
Mira: That prediction about the hyperfine splitting is pretty specific. It gives us a concrete target to check against future experiments.
Lev: And then they take those masses and use light cone sum rules to find radiative widths, like five point two five plus eight point five seven minus three point six two kiloelectron volts for that Xi star transition.
Kai: Those widths are the direct output from the light cone sum rules, which lets them break down the transition into magnetic dipole and electric quadrupole form factors.
Mira: The comparison with other theories is interesting because their central values for these radiative widths are smaller than what heavy baryon chiral perturbation theory predicts, but larger than what some relativistic quark models get.
Lev: That difference tells us there's still a gap in how we model the dynamics of these heavy systems when using those different theoretical frameworks.
Kai: They also point out that the relative signs of the light-quark and heavy-quark contributions to those form factors can change the sign of the total transition moment, which is something you have to watch closely when comparing absolute values.
Mira: It sounds like they’re trying to build a solid framework for these calculations using sum rules before we try running them on real hardware where the noise is way worse.
Lev: That’s right. The authors admit that they haven't done the full double Borel transformation yet, and they haven't fully separated the light-quark and heavy-quark photon emission contributions cleanly.
Kai: So while they give us specific numbers for those radiative widths, it’s a benchmark based on these sum rules, not necessarily the final answer.
Mira: It sets a good baseline for where we expect to see signals at experiments like LHCb or Belle II later on.
Lev: Makes sense because if you want a tight prediction on the transition moments, you need that clean separation of the light and heavy quark effects first.
Kai: Anyway, once we have these masses and widths pinned down, it sets us up perfectly to look at what other transitions might be happening in this sector.
The paper's improvements: Tom: So, this paper is summarizing how they used mixed interpolating currents in QCD sum rules to figure out the masses of these low-lying doubly charmed strange baryons and their transitions.
Kai: Right, so they’re using these mixed currents to get those mass estimates, like three point six two plus zero point one four minus zero point one five gigaelectron volts for the MXi cc state.
Mira: They also highlight that this approach helps fix the masses in a way that is compatible with what we already observe for the Xi and Omega states.
Lev: From an engineering standpoint, I see the value of using those mixed currents because diagonal correlators alone just aren't enough to get a physically acceptable sum rule result.
Kai: Exactly. They introduce these mixed currents J1 and J2 with a specific angle theta two to account for those off-diagonal contributions that are usually ignored.
Mira: That’s the assumption they have to make, which is what you need when the standard method isn't giving you solid results.
Lev: And then they use these currents to calculate the transition magnetic moment and radiative decay width, which gives them those numbers like five point two five plus eight point five seven minus three point six two kiloelectron volts for that Xi star transition.
Kai: So they’re using those calculated masses as inputs into the light cone sum rules to get these radiative widths.
Mira: And then they compare those results against lattice QCD and other models, which shows some tension because their central values are smaller than what heavy baryon chiral perturbation theory predicts, but larger than relativistic constituent quark model results.
Lev: It’s interesting that the tension exists between the different theoretical tools when it comes to these specific transition moments.
Kai: They also mention that the relative signs of the light-quark and heavy-quark contributions can affect the total transition moment's sign, which means we have to be careful about comparing absolute values.
Mira: It sounds like they are trying to build a more robust way to get these inputs for future experimentalists.
Lev: But they also flag that they haven't done the full double Borel transformation yet, and separating the light-quark and heavy-quark photon emission contributions is still a bit messy.
Kai: So what this means for us is that while we have these specific predictions based on sum rules, we need more work to fully disentangle those quark contributions for really precise transition moments.
Mira: It gives us a solid starting point, but it’s definitely pointing toward the next steps in refining our understanding of these decays.
Conclusion: Kai: So, to wrap up, this paper on "Low-lying doubly charmed strange baryons via QCD sum rules" gives us specific mass predictions and radiative widths for these states using mixed currents and light cone sum rules.
Mira: And the main implication is that these calculated values are a solid benchmark against other theoretical tools like lattice QCD and heavy baryon chiral perturbation theory, even if there are still some differences in those central numbers.
Lev: From an error correction standpoint, it’s useful because we get a baseline for how much precision we should expect from these sum rule calculations before we try to run them on real hardware.
Kai: They show that using the mixed currents helps constrain the masses better, and they also break down the transition tensor into two independent structures to separate magnetic dipole and electric quadrupole contributions.
Mira: That separation is important because it lets us look at GM1 zero and GE2 zero separately, which tells us how much of each multipole is driving the decay width.
Lev: I think those individual form factors are where we need to focus next, since uncertainties in the widths are primarily tied to GM1 zero and those baryon masses.
Kai: Exactly. And they also point out that the sign of the total transition moment can change depending on how you define your conventions for the currents.
Mira: So while they give us these specific numbers, we still need to be careful about whether we are comparing absolute values or just relative signs between different models.
Lev: It’s a good reminder that even with advanced sum rules, the light- and heavy-quark contributions are so similar in magnitude that it substantially affects the total form factor calculation.
Kai: So, while this paper on "Low-lying doubly charmed strange baryons via QCD sum rules" gives us specific predictions for masses and radiative widths, it’s also laying out exactly where the current limitations are in those calculations.
Mira: It’s a step toward making these theoretical predictions more reliable for when we start looking at experimental data from LHCb or Belle II.
Lev: Yeah, getting that clean separation of light- and heavy-quark photon emission is definitely the next big hurdle for this type of analysis.
School of Physics, Henan Normal University · School of Physics, Southeast University
hep-ph
Submitted: 2026-11-12
Updated: 2026-11-15
Comments: 15 pages, 3 figures, 4 tables, suggestions and comments welcome
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 83/100
The gist: Low-lying doubly heavy baryons and their radiative transitions are investigated using QCD sum rules and light-cone sum rules to provide theoretical guidance for future experimental searches By…
Key concepts
- QCD Sum Rules
- A method used to estimate the properties of hadrons by relating their correlation functions calculated at different energy scales. This involves matching calculations done in the low-energy hadronic regime with those in the high-energy quark-gluon regime, allowing for predictions of masses and decay rates.
- Light-Cone Sum Rules (LCSR)
- A technique applied to calculate electromagnetic form factors and radiative transition widths by analyzing correlation functions involving an external photon. This method decomposes the transition into components related to magnetic-dipole (M1) and electric-quadrupole (E2) multipole form factors.
- Mixed Interpolating Currents
- These are constructed currents used in QCD sum rules that combine different Lorentz structures. They are employed to improve the accuracy of mass extraction by incorporating off-diagonal contributions, which is necessary when simpler diagonal currents do not provide sufficient information.
- Form Factors (GM1, GE2)
- These functions describe how the transition between two baryon states occurs under electromagnetic interaction. GM1 relates to magnetic-dipole transitions, while GE2 relates to electric-quadrupole transitions. Their values are crucial for calculating radiative decay widths.
Terminology
Summary
Low-lying doubly heavy baryons and their radiative transitions are investigated using QCD sum rules and light-cone sum rules to provide theoretical guidance for future experimental searches By constructing mixed interpolating currents, the study obtains masses for low-lying doubly heavy baryons including MΞcc = 3. p. 062+0.14−0.15 GeV, MΞ∗cc = 3. p. 072+0.14−0.13 GeV, Momegacc = 3. p. 072+0.13−0.15 GeV, and Momega∗cc = 3. p. 082+0.13−0.15 GeV These extracted masses are compatible with the observed Ξcc and omegacc states and predict hyperfine splittings of about 108 MeV and 99 MeV for the Ξcc and omegacc systems, respectively Using these inputs, the LCSR for electromagnetic form factors is derived to obtain radiative widths such as Γ(Ξ∗++cc → Ξ++cc γ) = 5. p. 025+8.57−3.62 keV and Γ(omega∗+cc → omega++ccγ) = 0. p. 041+0.67−0.30 keV
Mass Analyses from QCD Sum Rules
The investigation systematically examines local interpolating currents for S-wave doubly heavy baryons, considering ground-state systems Q1Q2q where Q is a heavy quark and q is a light quark The total angular momentum J is obtained by coupling the three quark spins, defined as J = sQ1 ⊗ sQ1 ⊗ sq = sq ⊗ jl = sQ2 ⊗ j3 Three types of interpolating currents B1(x), B2(x), and B3(x) are considered, with specific Lorentz structures like η3α and η4α being constructed for J P = 3/2+ states The mass of the state is extracted by evaluating the two-point correlation function at both hadronic and quark–gluon levels using a Borel transformation
Electromagnetic Transitions from Light-Cone Sum Rules
The radiative transitions B∗(3/2+) → B(1/2+)γ are studied using light-cone sum rules to express the transition magnetic moment and radiative decay width in terms of magnetic-dipole (M1) and electric-quadrupole (E2) form factors, GM1 and GE2 The invariant form factors G1 and G2 are isolated by decomposing the transition tensor into two independent Lorentz structures, T1 and T2 The final radiative decay width is then expressed in terms of these multipole form factors as Γ(B∗ → Bγ) = α16 (M∗2B − M2B)3 / M∗3B M2B GM1(0)2 + 3GE2(0)2
Comparison with other approaches
The numerical results for the radiative widths are compared with predictions from lattice QCD, heavy-baryon chiral perturbation theory (HBChPT), and nonrelativistic quark models (NRQM) The central values of our radiative widths are smaller than both the HBChPT predictions and the relativistic constituent quark-model results of Branz et al. In contrast, for the three doubly charmed channels, our central values are larger than the lattice-QCD results The relative sign of the light- and heavy-quark contributions is important as it determines the sign of the total transition moment
Summary and Discussions
The full results for GM1(0), GE2(0), and µ are obtained by combining photon emission through light-quark distribution amplitudes and direct emission from heavy-quark lines For the Ξ∗+cc → Ξ++ccγ and omega∗+cc → omega++ccγ transitions, the GM1(0) values have signs opposite to those reported in the lattice-QCD calculation The heavy-quark contribution is non-negligible because it is of the same order of magnitude as the light-sector contribution and substantially affects the total form factor A future analysis using a double Borel transformation, together with a detailed separation of the light- and heavy-quark photon-emission contributions, would help establish more robust predictions for the transition moments and decay widths The E2 form factors are much smaller than the M1 form factors in all six channels, meaning uncertainties in the widths are primarily associated with GM1(0)
TABLE III: The results of multipole form factors GM1(0) and GE2(0), transition magnetic moments µ (in units of µN), and radiative widths Γ (in keV). We use the magnetic-dipole form factors G l M1(0) and G h M1(0) to reflect the contributions through the light-quark light-cone distribution amplitudes and direct emission from heavy-quark lines separately The E2 form factors are much smaller than the M1 form factors in all six channels Consequently, uncertainties in the widths are primarily associated with GM1(0), including the relative contributions of light- and heavy-quark, and with the baryon masses The results are summarized in Table III
TABLE IV: Comparison of transition magnetic moments and radiative widths across theoretical approaches. Each entry gives (µ/µN, Γ/keV) For the six ground-state transitions B∗(3/2+) → B(1/2+)γ, the central values of our radiative widths are smaller than both the HBChPT predictions and the relativistic constituent quark-model results of Branz et al. p. 6 In contrast, for the three doubly charmed channels, our central values are larger than the lattice-QCD results The sign of a transition magnetic moment changes when one external baryon state is rephased Comparisons of absolute signs therefore require consistent interpolating-current and electromagnetic-current conventions The relative signs of the light- and heavy-quark contributions provide information about their interference and the underlying dynamics
Appendix A: The spectral densities for mass sum rules and light-cone sum rules. In this appendix, we collect the spectral densities ρ l 1(s), ρ h 1(s), ρ l 2(s), and ρ h 2(s) for radiative transition Ω∗cc(3/2+) → Ωcc(1/2+)γ within light-cone sum rules The OPE includes the perturbative contribution, the quark condensate, the mixed quark-gluon condensate, and the gluon condensate corrections
Appendix B: Transition magnetic moments in the quark model. In the nonrelativistic constituent quark model, the 3/2+ → 1/2+ radiative transition is dominated by the magnetic-dipole (M1) multipole The resulting transition magnetic moments for the six channels are listed in Appendix B
Appendix C: Comparison with other approaches. Table IV compares the transition magnetic moments and radiative widths for the six channels considered here The lattice-QCD results are taken from Bahtiyar et al. p. 6 [49] Both the heavy-baryon chiral perturbation theory (HBChPT) results and the nonrelativistic quarkmodel (NRQM) estimates are taken from Li et al. p. 6 p. 6 p. 6 p. 6 p. 6 p. 6 p. 6 [39] The relativistic constituent threequark-model widths are taken from Branz et al. p. 6 p. 6 p. 6 p. 6 p. 6 p. 6 p. 6 [37]
Appendix D: Light-cone sum rules. To derive the light-cone sum rules for B∗ → Bγ, we consider the two-point correlation function in an external photon state The ground-state contribution to the correlation function is then given by Eq. p. 5 p. 5 p. 5 p. 5 p. 5 p. 5 p. 5 (49) After substituting Eq. p. 5 p. 5 p. 5 p. 5 p. 5 p. 5 p. 5 (38) and we decompose the correlation function into independent Lorentz structures, T1 and T2 The light-cone sum rules for G1 and G2 are obtained in Eqs. p. 5 p. 5 p. 5 p. 5 p. 5 p. 5 p. 5 (54) and (55)
Appendix E: Comparison with other approaches. Table IV compares the transition magnetic moments and radiative widths across theoretical approaches The lattice-QCD results are taken from Bahtiyar et al. p. 6 p. 6 p. 6 p. 6 p. 6 p. 6 [49] Both the heavy-baryon chiral perturbation theory (HBChPT) results and the nonrelativistic quarkmodel (NRQM) estimates are taken from Li et al. [39] The relativistic constituent threequark-model widths are taken from Branz et al. [37]
Appendix F: Light-cone sum rules. To derive the light-cone sum rules for B∗ → Bγ, we consider the two-point correlation function in an external photon state The ground-state contribution to the correlation function is then given by Eq. (49) After substituting Eq. (38) and we decompose the correlation function into independent Lorentz structures, T1 and T2 The light-cone sum rules for G1 and G2 are obtained in Eqs. (54) and (55) The explicit spectral densities ρ l 1(s, MB) and ρ h 1(s, MB), etc. p. 2, are collected in Appendix A
Appendix G: Transition magnetic moments in the quark model. In the nonrelativistic constituent quark model, the transition magnetic moment is defined as µf i = D B, Jz = 1/2 X 3 i=1 µi σiz The resulting transition magnetic moments for the six channels are listed in Appendix B
Appendix H: Comparison with other approaches. Table IV compares the transition magnetic moments and radiative widths across theoretical approaches The lattice-QCD results are taken from Bahtiyar et al. [49] Both the heavy-baryon chiral perturbation theory (HBChPT) results and the nonrelativistic quarkmodel (NRQM) estimates are taken from Li et al. [39] The relativistic constituent threequark-model widths are taken from Branz et al. [37]
Appendix I: Light-cone sum rules. To derive the light-cone sum rules for B∗ → Bγ, we consider the two-point correlation function in an external photon state The ground-state contribution to the correlation function is then given by Eq. (49) After substituting Eq. (38) and we decompose the correlation function into independent Lorentz structures, T1 and T2 The light-cone sum rules for G1 and G2 are obtained in Eqs. (54) and (55)
Appendix J: Transition magnetic moments in the quark model. In the nonrelativistic constituent quark model, the transition magnetic moment is defined as µf i = D B, Jz = 1/2 X 3 i=1 µi σiz The resulting transition magnetic moments for the six channels are listed in Appendix B
Appendix K: Comparison with other approaches. Table IV compares the transition magnetic moments and radiative widths across theoretical approaches The lattice-QCD results are taken from Bahtiyar et al. [49] Both the heavy-baryon chiral perturbation theory (HBChPT) results and the nonrelativistic quarkmodel (NRQM) estimates are taken from Li et al. [39] The relativistic constituent threequark-model widths are taken from Branz et al. [37]
Appendix L: Light-cone sum rules. To derive the light-cone sum rules for B∗ → Bγ, we consider the two-point correlation function in an external photon state The ground-state contribution to the correlation function is then given by Eq. (49) After substituting Eq. (38) and we decompose the correlation function into independent Lorentz structures, T1 and T2 The light-cone sum rules for G1 and G2 are obtained in Eqs. (54) and (55)
Appendix M: Transition magnetic moments in the quark model. In the nonrelativistic constituent quark model, the transition magnetic moment is defined as µf i = D B, Jz = 1/2 X 3 i=1 µi σiz The resulting transition magnetic moments for the six channels are listed in Appendix B
Appendix N: Comparison with other approaches. Table IV compares the transition magnetic moments and radiative widths across theoretical approaches The lattice-QCD results are taken from Bahtiyar et al. [49] Both the heavy-baryon chiral perturbation theory (HBChPT) results and the nonrelativistic quarkmodel (NRQM) estimates are taken from Li et al. [39] The relativistic constituent threequark-model widths are taken from Branz et al. [37]
Appendix O: Light-cone sum rules. To derive the light-cone sum rules for B∗ → Bγ, we consider the two-point correlation function in an external photon state The ground-state contribution to the correlation function is then given by Eq. (49) After substituting Eq. (38) and we decompose the correlation function into independent Lorentz structures, T1 and T2 The light-cone sum rules for G1 and G2 are obtained in Eqs. (54) and (55)
Appendix P: Transition magnetic moments in the quark model. In the nonrelativistic constituent quark model, the transition magnetic moment is defined as µf i = D B, Jz = 1/2 X 3 i=1 µi σiz The resulting transition magnetic moments for the six channels are listed in Appendix B
Appendix Q: Comparison with other approaches. Table IV compares the transition magnetic moments and radiative widths across theoretical approaches The lattice-QCD results are taken from Bahtiyar et al. [49] Both the heavy-baryon chiral perturbation theory (HBChPT) results and the nonrelativistic quarkmodel (NRQM) estimates are taken from Li et al. [39] The relativistic constituent threequark-model widths are taken from Branz et al. [37]
Appendix R: Light-cone sum rules. To derive the light-cone sum rules for B∗ → Bγ, we consider the two-point correlation function in an external photon state The ground-state contribution to the correlation function is then given by Eq. (49) After substituting Eq. (38) and we decompose the correlation function into independent Lorentz structures, T1 and T2 The light-cone sum rules for G1 and G2 are obtained in Eqs. (54) and (55)
Appendix S: Transition magnetic moments in the quark model. In the nonrelativistic constituent quark model, the transition magnetic moment is defined as µf i = D B, Jz = 1/2 X 3 i=1 µi σiz The resulting transition magnetic moments for the six channels are listed in Appendix B
Appendix T: Comparison with other approaches. Table IV compares the transition magnetic moments and radiative widths across theoretical approaches The lattice-QCD results are taken from Bahtiyar et al. [49] Both the heavy-baryon chiral perturbation theory (HBChPT) results and the nonrelativistic quarkmodel (NRQM) estimates are taken from Li et al. [39] The relativistic constituent threequark-model widths are taken from Branz et al. [37]
Appendix U: Light-cone sum rules. To derive the light-cone sum rules for B∗ → Bγ, we consider the two-point correlation function in an external photon state The ground-state contribution to the correlation function is then given by Eq. (49) After substituting Eq. (38) and we decompose the correlation function into independent Lorentz structures, T1 and T2 The light-cone sum rules for G1 and G2 are obtained in Eqs. (54) and (55)
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved AI can perform systematic mass analysis of low-lying doubly heavy baryons by constructing mixed interpolating currents, as described in Section II. This allows for a rigorous determination of masses compatible with observed states and prediction of hyperfine splittings.
-
Improved AI can calculate electromagnetic form factors GM1 and GE2 using light cone sum rules (LCSR) to determine transition magnetic moments and radiative widths for six ground-state transitions. This capability is crucial for predicting decay modes at experiments like LHCb and Belle II.
-
Improved AI can perform current mixing, introducing mixed currents J1 and J2 with a specific angle theta 2, to obtain physically acceptable sum rule results when diagonal correlators are insufficient. This addresses the need to incorporate off-diagonal contributions accurately in mass extraction.
-
Improved AI can calculate the invariant form factors G1(0) and G2(0) for all six channels by projecting the two-point correlation function into independent Lorentz structures T1 and T2. This allows for a separate determination of magnetic-dipole and electric-quadrupole contributions without solving coupled linear equations.
-
Improved AI can compare theoretical predictions from QCD sum rules, lattice QCD, heavy baryon chiral perturbation theory (HBChPT), and nonrelativistic quark models against experimental data using the results in Table IV. This enables a quantitative assessment of the relative contributions of light- and heavy-quark sectors to transition moments.
Sources
- First Observation of the Doubly Charmed Baryon Xi_cc^+
- Observation of New States Decaying into $\Lambda_c^+ K^-\pi^+$ and $\Lambda_c^+ K^0_S\pi^-$
- Search for Doubly Charmed Baryons Xi_cc^+ and Xi_cc^++ in BABAR
- Observation of the doubly charmed baryon $\Xi_{cc}^{++}$
- Observation of the doubly charmed baryon $\it{\Xi}_{cc}^+$ with the LHCb Run 3 detector
- Mass spectra of doubly heavy baryons in the relativistic quark model
- Charmed and Bottom Baryons from Lattice NRQCD
- Evaluation of Spectra of Baryons Containing Two Heavy Quarks in Bag Model
- Baryon Masses in Lattice QCD with Exact Chiral Symmetry
- Static properties and semileptonic decays of doubly heavy baryons in a nonrelativistic quark model
- Doubly heavy baryons in QCD sum rules
- Towards an understanding of heavy baryon spectroscopy
- Isospin mass splittings of heavy baryons in HQS
- Singly and Doubly Charmed J=1/2 Baryon Spectrum from Lattice QCD
- Analysis of the ${3\over 2}^+$ heavy and doubly heavy baryon states with QCD sum rules
- Mass-splittings of doubly heavy baryons in QCD
- Isospin splittings of doubly heavy baryons
- Doubly heavy spin--1/2 baryon spectrum in QCD
- Charmed baryons at the physical point in 2+1 flavor lattice QCD
Related papers
- MadNIS at NLO
- The NANOGrav 15-year data set: A Limit on Continuous Spin Gravitons
- DIS-secting the universe with high-energy neutrinos
- Crowdsourcing Gravitational Waves from Superradiant Axions
- Classification of g-modes for neutron stars with a strong transition: Novel universal relation including slow stable hybrid stars
- Scalar axion field of toroidal electromagnetic pulses