A Theoretical Framework for Frequency-Shift Filtering-Based Interference Mitigation for OFDM Systems
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Electrical Engineering. The day in electrical engineering: signals, systems and the hardware that carries them.
Rosa: I'm Rosa.
Dev: And I'm Dev, here with Taro.
Rosa: We're looking at the paper: "A Theoretical Framework for Frequency-Shift Filtering-Based Interference Mitigation for OFDM Systems".
Dev: Here's the gist of the paper. Orthogonal frequency division multiplexing (OFDM) is widely adopted in modern wireless systems due to its high spectral efficiency and robustness to multipath propagation By leveraging correlations between frequency-shifted versions of the received signal, the FRESH filter provides optimal linear filtering for the cyclostationary processes The proposed framework enables offline computation of the filter coefficients when the signal structure is known and interference parameters are estimated, thereby reducing real-time implementation complexity Numerical results demonstrate the effectiveness of the proposed method in suppressing interference and improving detection performance compared to conventional approaches.
Rosa: Theoretical Foundation of Cyclostationarity A complex-valued random process x(t) is said to be widesense cyclostationary (WSCS) with fundamental period T if its second-order statistics are periodic in time The autocorrelation function Rx(t, τ) = E h x t + τ 2 x∗ t − τ 2 i (1) satisfies Rx(t, τ) = Rx(t + T, τ) Due to this periodicity, Rx(t, τ) admits a Fourier series expansion with respect to t, given by Rx(t, τ) = X α R α x (τ)e j 2 π α t, (2) The spectral correlation function (SCF) is defined as S α x (f) = Z ∞ −∞ R α x (τ)e − j 2 π f τ d τ, (3) FRESH Filter Derivation It is well known that the optimal linear filter for stationary signals is time-invariant For signals exhibiting cyclostationarity with a single period (or multiple incommensurate periods), the corresponding optimal filter is periodically time-varying, with the same periodicity structure The linear conjugate-linear (LCL) FRESH filter was developed in
27: to exploit the SCF and, more generally, the conjugate SCF of cyclostationary signals The optimal filter coefficient design equation can be written as M X − 1 m = 0 S α p − α m x f − α p + α m 2 Am (f) = S α p dx f − α p 2, p = 0, 1,..., M − 1, (9) OFDM Signal Analysis The time-domain autocorrelation function of the OFDM signal can be expressed as Rd(n, τ) = E h d n + τ 2 d∗ n − τ 2 i, = 1 / N X ∞ l = −∞ N X − 1 k = 0 N X − 1 k′ = 0 E
X l, k X ∗ l ′, k ′: e j 2 π (n + τ / 2 − lNs − Ncp) k N e − j 2 π (n - τ / 2 − l ′Ns − Ncp) k′ N g(n + τ / 2 − lNs)g(n - τ / 2 − l ′Ns), = 1 / N X ∞ l =−∞ N X−1 k =0 N X−1 k′ =0 h P P H i k,k′ e j 2 π N
(k − k′) (n − lNs − Ncp) + τ / 2 (k + k′): g(n + τ / 2 − lNs)g(n - τ / 2 − l ′Ns), = R α− k−k′ N g (τ), (21) Frequency-Domain Formulation and Complexity A compact matrix representation of the optimal filter coefficient design equation can be written as S x A = S dx (11) The time-domain empirical approach requires a statistical-estimation complexity of O Nt M 2 L + L 3 M 3 + Nrx LM In contrast, the analytical time-domain approach for initial coefficient generation has a complexity of O MN 2 L + MLN0 + L 3 M 3 The frequency-domain implementation complexity is O Kt M 2 N + NM 3 + Kr MN Performance Comparison and Conclusion The FRESH filter significantly outperforms the conventional Wiener filter and standalone LDPC coding in interference-dominated scenarios When the interference is weak, standalone LDPC coding is sufficient as the system becomes noise-limited Under strong interference, the combination of FRESH filtering and higher-rate LDPC coding achieves the lowest BER among the considered schemes while preserving the overall throughput.
Dev: The proposed formulation enables offline coefficient computation and efficient frequency-domain implementation, making it well suited to practical OFDM receivers Acknowledgment The authors declare that no artificial intelligence (AI) or generative AI tools were used in conducting the research, performing the analysis, or preparing this manuscript.
Rosa: References
1: L.
Title and authors: Rosa: So we're looking at this paper called "A Theoretical Framework for Frequency-Shift Filtering-Based Interference Mitigation for OFDM Systems" and it's about how to tackle that interference that messes up OFDM signals.
Dev: Exactly. The authors, Xinrui Li, Karim Said, Daniel J. Jakubisin, R Michael Buehrer, and Jeffrey H Reed, they're proposing a new filtering method called the FRESH filter to handle narrowband and wideband interference in OFDM systems.
Taro: So when you say interference that messes up OFDM signals what are you thinking about? Is it just simple noise, or is it something more structured that needs a specific kind of fix?
Rosa: Well, the paper starts by looking at how the second-order statistics of these OFDM signals behave when there's a known structure. They analyze these properties to figure out the cyclostationary nature of the signal and then use that information to design an optimal linear filter.
Dev: It seems they're using correlations between frequency-shifted versions of the received signal to find this optimal filter for those specific cyclostationary processes. That's what they call the FRESH filter, which is designed to exploit that inherent structure.
Taro: So, if you can exploit a known structure in the signal itself, does that mean you can build something better than just a standard Wiener filter we usually use?
Rosa: It seems so. They show how this FRESH filter provides an optimal linear filtering solution for those cyclostationary processes, which is better suited for what's happening in these complex environments.
Dev: And the core of their idea is that they can figure out the filter coefficients offline when they know the signal structure and we can estimate some interference parameters beforehand. That's a big deal because it cuts down on how much real-time computation is needed during operation.
Taro: So, if we pre-calculate those coefficients, does that mean the system can adapt to changes in the environment faster? Or is it just a fixed filter once you've done that initial setup?
Rosa: It suggests a trade off. They show that this offline computation reduces the real-time implementation complexity significantly when compared to other methods we've seen.
Title and authors: Dev: The paper then moves into how OFDM signals look in the frequency domain, showing a compact matrix representation for designing those optimal filter coefficients. They compare this to the time-domain empirical approach and the analytical time-domain approach for initial coefficient generation.
Taro: And what are those complexities you mentioned? Like big O notation? Are we talking about something that runs instantly on a mobile device, or is it still heavy computation for a transmitter or receiver?
Rosa: They give us some numbers. The time-domain empirical approach has a statistical estimation complexity of O Nt M squared L plus L cubed M cubed plus Nrx LM In contrast, the analytical time-domain approach for generating those initial coefficients has a complexity of O MN squared L plus MLN0 + L cubed M cubed.
Dev: Then they look at the frequency-domain implementation complexity, which is O Kt M squared N plus NM cubed plus Kr MN. That's where we need to be careful about how this translates to actual hardware on the radio channel side.
Taro: So, what's the practical difference in terms of latency if you use the frequency domain approach versus trying to do it purely in the time domain?
Rosa: The paper implies that the frequency-domain implementation complexity is relatively low, which helps keep things efficient for real-time processing in an OFDM receiver.
Dev: And performance wise, they show that this FRESH filter significantly outperforms conventional Wiener filters and standalone LDPC coding when we're dealing with interference that dominates the signal.
Taro: So, if the interference is really strong, does this mean we should just rely on this filter without any extra error correction?
Rosa: Not necessarily. They show that when the interference is weak, standalone LDPC coding is enough because the system becomes noise-limited. But under strong interference, they suggest combining FRESH filtering with a higher-rate LDPC coding scheme gets us the lowest bit error rate among all the schemes they tested while still keeping our throughput up.
Dev: That's an important distinction for a real receiver design. It suggests we need a strategy that switches based on how much interference we detect in real time.
Title and authors: Taro: So, if we think about what this means for users who are actually using these systems, what does this improved performance translate to in terms of actual data quality?
Rosa: It means when the environment is noisy, this framework helps suppress that interference while causing minimal signal distortion. The paper also shows that when they remove the cyclic prefix, they still see similar performance at low signal-to-noise ratio, but a drop of about two decibels at an SNR of thirty decibels for the CP removed case <ref:2611.16292#pg2>.
Dev: It's a bit of a trade off, isn't it? We get better interference suppression but we lose some margin when we remove the cyclic prefix in certain conditions.
Taro: So, what about limitations? What doesn't this FRESH filter do well according to the authors themselves?
Rosa: The paper mentions that their approach relies on conditions where either the interference power is significantly higher than the desired signal power, or when the desired signal bandwidth is substantially larger than the interference bandwidth for some of their other related techniques.
Dev: That means we can't just apply this blindly if our interference isn't overwhelming compared to our signal strength.
Taro: So, to wrap up on this paper, what’s the main thing we should remember about "A Theoretical Framework for Frequency-Shift Filtering-Based Interference Mitigation for OFDM Systems"?
Rosa: The main thing is that by using the FRESH filter, we can get better interference suppression and lower error rates in those tough interference environments where conventional methods struggle.
Dev: And it’s a practical framework because it allows us to compute the filter coefficients offline, which simplifies our real-time loop design and lets us focus on robust implementation.
Taro: So, we have this method that scales well for offline setup and offers better performance in high interference scenarios when paired with the right error correction.
Rosa: Exactly. It shows how exploiting cyclostationarity can lead to a filtering solution that works effectively in OFDM systems. Now, let's see what else is happening on arXiv today, because we have another paper we need to look at.
The paper's summary: Rosa: So, we're looking at this paper about the FRESH filter for OFDM systems, and basically, it’s about using the signal’s own structure to clean up interference better than what we usually do.
Dev: Right. It boils down to figuring out how a signal behaves when it has that specific cyclostationary nature, which lets them design a linear filter that’s actually optimal for those signals.
Taro: So, what does this mean in practice? If you know the structure beforehand, you can pre-calculate the filter coefficients before you even start sending data.
Rosa: Exactly. The big point is that this allows for offline computation of those filter coefficients when the signal structure is known and we can estimate some interference parameters first. That cuts down on how much real-time computing we have to do while the system is running outside the lab environment.
Dev: I’m interested in that reduction in real-time load. They mention this offline computation significantly reduces the complexity compared to those other time-domain approaches we looked at earlier, which is pretty important for keeping our control loops fast and low latency.
Taro: If we think about failure modes, does this pre-calculation mean the system is more robust when interference suddenly changes? Or are we stuck with that one set of coefficients for a long time?
Rosa: It suggests that once you have those initial parameters estimated, subsequent updates only require updating the interference statistics when those parameters actually change. That’s an update complexity that’s manageable, like O(M L N zero plus L cubed M cubed).
Dev: So the system can adapt its mitigation strategy efficiently as channel conditions evolve without needing a massive recalculation every millisecond. That would be a huge win for any real-time implementation on the radio channel side.
Taro: But what about when the interference is really strong, or when it’s just simple noise? The paper says standalone LDPC coding is fine then, but they show this filter beats conventional Wiener filters in those strong interference scenarios.
Rosa: That's the key split. If the environment is noisy enough that you’re noise-limited, just using a higher rate LDPC code works fine. But when the interference is overwhelming, combining this FRESH filtering with a higher rate error correction code gets you the lowest bit error rate among all schemes they tested while still keeping your throughput up.
Dev: So, for our safety case, it looks like we have a clear strategy: detect the interference level and switch between using just coding or applying this advanced filtering method for better suppression. That’s a practical application.
Taro: It changes how we look at mitigation. We used to think we had to fight everything with just error correction, but here you can use structure-based filtering first, and then error correction as a backup when things get really bad.
Rosa: Right. And they did show that the CP removal doesn't completely destroy performance at low signal-to-noise ratios; it still holds up reasonably well compared to the full OFDM signal.
Dev: So, we can move forward with this idea of pre-computing coefficients for a frequency domain implementation because it keeps the structure compact and efficient on the receiver side.
Taro: It means we need to focus our testing on those strong interference scenarios where they claim this filter truly shines over the standard Wiener filter.
The paper's improvements: Tom: So, we're talking about how the FRESH filter improves things by focusing on the cyclostationary structure of OFDM signals instead of just using a generic filter.
Rosa: Basically, they’re suggesting this approach gives us better interference suppression because it exploits that inherent redundancy in the signal itself to design a more targeted linear filter.
Dev: That targeting is what makes it different from just applying a standard Wiener filter, which is much more general but less effective when the structure is highly specific like in OFDM.
Taro: So, if we look at the methodology, they’re moving away from just guessing parameters and instead providing a clear analytical way to generate those initial coefficients for offline use.
Rosa: Yeah, that analytical approach gives us a one-time cost for generating those coefficients, but then subsequent updates are much cheaper—just updating the interference statistics when they change. That’s an O M L N zero plus L cubed M cubed update complexity we talked about before.
Dev: That makes the system much more practical for real-time deployment because it doesn't require constant, heavy re-calculation every time the channel shifts slightly. The safety case there is that the setup phase is heavy, but the running phase stays light.
Taro: When we test this outside the lab, I’m looking at how it handles unexpected world misbehavior—like sudden interference spikes—and how gracefully it recovers based on those pre-estimated parameters.
Rosa: That’s what I want to know. Does this framework hold up when the world gets messy, or does it break down because the initial estimation was off? The paper suggests that its performance is highly dependent on the accuracy of those initial interference parameter estimates.
Dev: Exactly. If those parameters are far from reality, the filter design won't be optimal, and we get signal distortion instead of clean filtering. That’s a key caveat we need to watch out for in our loop design.
Taro: It seems like the future work would involve testing this more extensively in scenarios where interference power is very high compared to the desired signal power, since that's where they say it really outperforms other methods.
Rosa: Right. And I want to see if we can integrate this filtering framework with the adaptive code selection strategy we discussed—switching between just LDPC coding and this FRESH filter based on the detected interference level.
Dev: That’s a solid path forward, linking the detection of interference to an intelligent switch in mitigation technique. It turns it into a dynamic system rather than just a fixed filter application.
Taro: If we can make that adaptive switching work smoothly during high-speed operations, that’s where the real impact for autonomous systems will be seen.
Conclusion: Rosa: So we've covered how this paper, "A Theoretical Framework for Frequency-Shift Filtering-Based Interference Mitigation for OFDM Systems," uses cyclostationarity to design a filter that can suppress interference better than standard methods.
Dev: Yeah, the main takeaway is that by doing the coefficient calculation offline, you get a system that’s much lighter and faster when it runs in real time.
Taro: I just want to stress how this helps autonomy—if we can detect strong interference and switch to a higher coding rate dynamically, we can maintain signal quality even when the environment is really tough.
Rosa: Right. It's about having that flexibility, moving from just noise limited operation to a robust filtering phase when the interference gets severe.
Dev: The safety case seems pretty solid if we stick to that dynamic switching model because the update complexity is manageable, not some massive computation that crashes the loop rate.
Taro: I’m still wondering about those limitations they mention; if our environment doesn't fit their assumptions about interference power versus signal power, this framework might just fail to perform as expected.
Rosa: True. It stops working when the actual interference isn't significantly higher than the desired signal power, so we can’t apply it blindly in every single situation.
Dev: So for someone designing a receiver, it means you get a powerful tool that you have to tune carefully based on the real-world statistics of your channel.
Taro: It changes how we think about interference—not just as something to filter out, but as a structure we can mathematically exploit to improve detection.
Rosa: Exactly. This framework shows how exploiting cyclostationarity leads directly to a filtering solution that works effectively in OFDM systems under challenging conditions.
Dev: It’s a practical way to get better performance without needing massive processing power on the hardware side during operation.
Taro: Next time, we want to see if this kind of structure-aware filtering can be applied to other complex wireless channels, maybe even those with multiple frequency shifts happening at once.
Xinrui Li, Karim Said, Daniel J. Jakubisin, R. Michael Buehrer, Jeffrey H. Reed
Virginia Tech
eess.SP
Submitted: 2026-11-12
Updated: 2026-11-12
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 79/100
The gist: Orthogonal frequency division multiplexing (OFDM) is widely adopted in modern wireless systems due to its high spectral efficiency and robustness to multipath propagation By leveraging correlations…
Key concepts
- Cyclostationarity
- A complex signal is cyclostationary if its statistical properties repeat periodically over time. This periodicity allows researchers to use Fourier series expansions to analyze the signal's structure, which is key for designing filters that can optimally remove interference based on these repeating patterns.
- FRESH Filter
- This is a specific linear filter developed to exploit the spectral correlation function (SCF) of cyclostationary signals. It designs optimal filter coefficients by solving a specific matrix equation derived from the signal's structure, enabling effective interference suppression in OFDM communications.
- Offline Coefficient Computation
- The framework allows for pre-calculating the filter coefficients when the signal structure and interference parameters are already known. This shifts complex calculations offline, drastically reducing the computational load required for real-time implementation during actual communication.
- OFDM Signal Analysis
- This involves expressing the time-domain autocorrelation function of an OFDM signal in terms of frequency domain components. This mathematical representation is crucial for deriving the optimal filter design equations that target and suppress specific types of interference effectively.
Terminology
Summary
Orthogonal frequency division multiplexing (OFDM) is widely adopted in modern wireless systems due to its high spectral efficiency and robustness to multipath propagation By leveraging correlations between frequency-shifted versions of the received signal, the FRESH filter provides optimal linear filtering for the cyclostationary processes The proposed framework enables offline computation of the filter coefficients when the signal structure is known and interference parameters are estimated, thereby reducing real-time implementation complexity Numerical results demonstrate the effectiveness of the proposed method in suppressing interference and improving detection performance compared to conventional approaches. p. 0
Theoretical Foundation of Cyclostationarity
A complex-valued random process x(t) is said to be widesense cyclostationary (WSCS) with fundamental period T if its second-order statistics are periodic in time The autocorrelation function Rx(t, τ) = E h x t + τ 2 x∗ t − τ 2 i (1) satisfies Rx(t, τ) = Rx(t + T, τ) Due to this periodicity, Rx(t, τ) admits a Fourier series expansion with respect to t, given by Rx(t, τ) = X α R α x (τ)e j 2 π α t, (2) The spectral correlation function (SCF) is defined as S α x (f) = Z ∞ −∞ R α x (τ)e − j 2 π f τ d τ, (3)
FRESH Filter Derivation
It is well known that the optimal linear filter for stationary signals is time-invariant For signals exhibiting cyclostationarity with a single period (or multiple incommensurate periods), the corresponding optimal filter is periodically time-varying, with the same periodicity structure The linear conjugate-linear (LCL) FRESH filter was developed in [27] to exploit the SCF and, more generally, the conjugate SCF of cyclostationary signals The optimal filter coefficient design equation can be written as M X − 1 m = 0 S α p − α m x f − α p + α m 2 Am (f) = S α p dx f − α p 2, p = 0, 1,..., M − 1, (9)
OFDM Signal Analysis
The time-domain autocorrelation function of the OFDM signal can be expressed as Rd(n, τ) = E h d n + τ 2 d∗ n − τ 2 i, = 1 / N X ∞ l = −∞ N X − 1 k = 0 N X − 1 k′ = 0 E [X l, k X ∗ l ′, k ′] e j 2 π (n + τ / 2 − lNs − Ncp) k N e − j 2 π (n - τ / 2 − l ′Ns − Ncp) k′ N g(n + τ / 2 − lNs)g(n - τ / 2 − l ′Ns), = 1 / N X ∞ l =−∞ N X−1 k =0 N X−1 k′ =0 h P P H i k,k′ e j 2 π N [(k − k′) (n − lNs − Ncp) + τ / 2 (k + k′)] g(n + τ / 2 − lNs)g(n - τ / 2 − l ′Ns), = R α− k−k′ N g (τ), (21)
Frequency-Domain Formulation and Complexity
A compact matrix representation of the optimal filter coefficient design equation can be written as S x A = S dx (11) The time-domain empirical approach requires a statistical-estimation complexity of O Nt M 2 L + L 3 M 3 + Nrx LM In contrast, the analytical time-domain approach for initial coefficient generation has a complexity of O MN 2 L + MLN0 + L 3 M 3 The frequency-domain implementation complexity is O Kt M 2 N + NM 3 + Kr MN
Performance Comparison and Conclusion
The FRESH filter significantly outperforms the conventional Wiener filter and standalone LDPC coding in interference-dominated scenarios When the interference is weak, standalone LDPC coding is sufficient as the system becomes noise-limited Under strong interference, the combination of FRESH filtering and higher-rate LDPC coding achieves the lowest BER among the considered schemes while preserving the overall throughput. The proposed formulation enables offline coefficient computation and efficient frequency-domain implementation, making it well suited to practical OFDM receivers
Acknowledgment
The authors declare that no artificial intelligence (AI) or generative AI tools were used in conducting the research, performing the analysis, or preparing this manuscript.
References
[1] L. Cimini, “Analysis and simulation of a digital mobile channel using orthogonal frequency division multiplexing,” IEEE Trans. p. 0 Commun., vol. 33, no. 7, pp. 665–675, Jul. 1985
[2] S. Weinstein and P. Ebert, “Data transmission by frequency-division multiplexing using the discrete Fourier transform,” IEEE Trans. p. 0 Commun Technol., vol. COM-19, no. 5, pp. 628–634, Oct. 1971
[3] A. Coulson, “Narrowband interference in pilot symbol assisted OFDM systems,” IEEE Trans Wireless Commun. p. 0, vol. 3, no. 6, pp. 2277–2287, Nov. p. 0 2004
[4] K. Shi, Y. Zhou, B. Kelleci, T. W Fischer, E Serpedin and A l Karsilayan, “Impacts of narrowband interference on OFDM-UWB receivers: Analysis and mitigation,” IEEE Trans Signal Process. p. 0, vol. 55, no. 3, pp. 1118–1128, Mar. 2007
[5] J B Coder and Y Ma, “On the susceptibility of coded OFDM to interference: A simulation study,” in 2018 United States National Committee of URSI National Radio Science Meeting (USNC-URSI NRSM), Jan. 2018, pp. 1–2
[6] A Tusha and H Arslan, “Interference burden in wireless communications: A comprehensive survey from PHY layer perspective,” IEEE Commun Surveys Tuts., vol. 27, no. 4, pp. 2204–2246, Oct. 2025
[7] M U A Siddiqui, F Qamar, F Ahmed, Q N Nguyen and R Hassan, “Interference management in 5G and beyond network: Requirements, challenges and future directions,” IEEE Access, vol. 9, pp. 68 932–68 965, Apr. 2021
[8] M Kuhn, D Benyoucef and A Wittneben, “Linear block codes for frequency selective PLC channels with colored noise and multiple narrowband interference,” in Proc. VTC’02: IEEE Vehic. p. 0 Technol Conf., vol. 4, May 2002, pp. 1756–1760 vol.4
[9] D Gerakoulis and P Salmi, “An interference suppressing OFDM system for wireless communications,” in Proc. IEEE Int Conf Commun. p. 0, vol. 1, Apr. 2002, pp. 480–484 vol.1
[10] Z Wu and C Nassar, “Narrowband interference rejection in OFDM via carrier interferometry spreading codes,” IEEE Trans Wireless Commun., vol. 4, no. 4, pp. 1491–1505, Jul. 2005
[11] A Batra and J R Zeidler, “Narrowband interference mitigation in BICM OFDM systems,” in Proc. IEEE Int Conf Acoust. p. 0, Speech Signal Process. p. 8, Apr. 2009, pp. 2605–2608
[12] A Gomaa and N Al-Dhahir, “A sparsity-aware approach for NBI estimation in MIMO-OFDM,” IEEE Trans Wireless Commun., vol. 10, no. 6, pp. 1854–1862, Jun. 2011
[13] ——, “A compressive sensing approach to NBI cancellation in mobile OFDM systems,” in Proc. IEEE Global Telecommun Conf. p. 0, Dec. 2010, pp. 1–5
[14] B Nuss, L Sit and T Zwick, “A novel technique for interference mitigation in OFDM radar using compressed sensing,” in IEEE MTT-S Int Microw Symp Dig., Mar. 2017, pp. 143–146
[15] D Darsena, “Successive narrowband interference cancellation for OFDM systems,” IEEE Commun Lett., vol. 11, no. 1, pp. 73–75, Jan. 2007
[16] R Nilsson, F Sjoberg and J LeBlanc, “A rank-reduced LMMSE canceller for narrowband interference suppression in OFDM-based systems,” IEEE Trans Commun., vol. 51, no. 12, pp. 2126–2140, Dec. 2003
[17] A Coulson, “Bit error rate performance of OFDM in narrowband interference with excision filtering,” IEEE Trans Wireless Commun., vol. 5, no. 9, pp. 2484–2492, Sep. 2006
[18] M Amin, C Wang and A Lindsey, “Optimum interference excision in spread spectrum communications using open-loop adaptive filters,” IEEE Trans Signal Process., vol. 47, no. 7, pp. 1966–1976, Jul. 1999
[19] L Milstein and P Das, “An analysis of a real-time transform domain filtering digital communication system - Part I: Narrow-band interference rejection,” IEEE Trans Commun., vol. 28, no. 6, pp. 816–824, Jun. 1980
[20] J Young and J Lehnert, “Analysis of DFT-based frequency excision algorithms for direct-sequence spread-spectrum communications,” IEEE Trans Commun., vol. 46, no. 8, pp. 1076–1087, Aug. 1998
[21] M Shibahara, T Fujii, I Sasase and T Saba, “Performance evaluation of adaptive co-channel interference canceling receiver using frequency spread coding and frequency interleaving for OFDM systems,” Euro Trans. Telecomms., vol. 14, no. 1, pp. 15–24, Mar. 2003
[22] Y Li and N Sollenberger, “Adaptive antenna arrays for OFDM systems with cochannel interference,” IEEE Trans Commun., vol. 47, no. 2, pp. 217–229, Feb. 1999
[23] Y Li, A Molisch and J Zhang, “Practical approaches to channel estimation and interference suppression for OFDM-based UWB communications,” IEEE Trans Wireless Commun., vol. 5, no. 9, pp. 2317–2320, Sep. 2006
[24] S Ellingson and R Buehrer, “Coherent time-domain canceling of interference for radio astronomy,” Publications Astronomical Soc Pacific, vol. 134, no. 1041, p. 114505, Nov. p. 0 2022
[25] X Li and R M Buehrer and S W Ellingson, “Parametric methods for coherent time-domain canceling of radio frequency interference,” Publications Astronomical Soc Pacific, vol. 137, no. 4, p. 044502, Apr. 2025
[26] X Li and R M Buehrer, “On the limits of coherent time-domain cancellation of radio frequency interference,” IEEE Trans Aerosp Electron Syst., vol. 62, pp. 8004–8017, Mar. 2026
[27] W Gardner, “Cyclic Wiener filtering: theory and method,” IEEE Trans Commun., vol. 41, no. 1, pp. 151–163, Jan. 1993
[28] J Tian, H Guo, H Hu and H H Chen, “Frequency-shift filtering for OFDM systems and its performance analysis,” IEEE Systems J., vol. 5, no. 3, pp. 314–320, Sep. 2011
[29] N Shlezinger and R Dabora, “Frequency-shift filtering for OFDM signal recovery in narrowband power line communications,” IEEE Trans Commun., vol. 62, no. 4, pp. 1283–1295, Apr. 2014
[30] W Gardner and W Brown, “Frequency-shift filtering theory for adaptive co-channel interference removal,” in Proc. 23rd Asilomar Conf Signals, Systems, Computers, vol. p. 1 2, Oct. 1989, pp. 562–567
[31] M Carrick, J H Reed and C M Spooner, “Paramorphic multicarrier communications for interference mitigation,” EURASIP J Adv Signal Process., vol. Jan. 2018, no. 1, p. 1, 2018
[32] W A Gardner, Statistical Spectral Analysis: A Nonprobabilistic Theory Prentice Hall, 1987
Simulation Results
In Fig. 5, the comparison between (3) and (4) evaluates the effect of CP removal, which truncates the interference signal The two approaches achieve similar performance at low SNR, while the CP-removed OFDM signal exhibits a performance degradation of approximately 2 dB at an SNR of 30 dB compared to the CP-OFDM signal
Conclusion
The FRESH filter significantly outperforms the conventional Wiener filter and standalone LDPC coding in interference-dominated scenarios By exploiting the spectral redundancy and cyclostationary structure, the FRESH filter effectively suppresses strong co-channel interference while introducing minimal signal distortion When the interference is weak, standalone LDPC coding is sufficient as the system becomes noise-limited Under strong interference, the combination of FRESH filtering and higher-rate LDPC coding achieves the lowest BER among the considered schemes while preserving the overall throughput.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Offline Coefficient Computation for FRESH Filter: The framework enables
offline pre-computation of the filter coefficients
when signal structure is known and interference parameters are estimated, reducing real-time implementation complexity. This allows for a system that can determine optimal filtering parameters before deployment based on known signal characteristics. -
Frequency Domain Implementation Efficiency: The paper describes a
compact closed-form matrix expression for the optimal FRESH filter coefficients,
which, when used with the frequency domain approach, allows the FRESH filter to be implemented primarily throughfrequency-domain shifts and multiplications.
This preserves the low-complexity structure of conventional OFDM receivers while achieving superior interference suppression. -
Analytical Coefficient Update: The analytical approach provides a
one-time coefficient-generation cost
for offline computation, and subsequent updates only require updating the interference statistics when parameters vary, leading to an update complexity of O(MLN0 + L3M3). This supports an AI system that can adapt its interference mitigation strategy efficiently as channel conditions evolve. -
Performance Superiority in Interference-Dominated Scenarios: Simulation results show that the FRESH filter
significantly outperforms the conventional Wiener filter and standalone LDPC coding in interference-dominated scenarios.
This suggests an improved AI system can prioritize FRESH filtering when high levels of co-channel interference are detected, especially when combined with higher rate error correction codes. -
Adaptive Code Selection Strategy: The results indicate that "when the interference is weak, directly applying LDPC coding is sufficient; when interference is strong, one may first employ the FRESH filter for interference suppression, followed by a higher code-rate error-correction coding scheme to maintain the overall throughput." An improved AI system can dynamically switch between these two strategies based on real-time Signal-to-Interference Ratio (SIR) estimates.
Related papers
- Open-H-RF: A Large-Scale Ultrasound Raw Channel Dataset Initiative
- Scalable Attention for 5G NR Channel Estimation
- Low-Altitude Wireless Networks: A Comprehensive Survey
- Sensing-Assisted OFDM with Index Modulation: A Waveform for Optical Wireless Integrated Communication and Localisation
- Iteration-Free Candidate Pruning and an Index-Domain VLSI Architecture for Sort-Free MIMO Box Decoding up to 1024-QAM
- A Foundation Model for Large-Scale Wireless Network Planning, Operation and Optimization