Intrinsic Chiral HOTI Stabilized by a Single Diagonal Reflection

arXiv:2611.16261 · math-ph, cond-mat.mes-hall, math.MP · Submitted 2026-11-12 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Mathematical Physics. The day in mathematical physics: rigorous models of physical systems.

Kai: We're looking at the paper: "Intrinsic Chiral HOTI Stabilized by a Single Diagonal Reflection".

Mira: Here's the gist of the paper. Higher-order topological insulators and superconductors, under combined point and fundamental symmetries, display topological modes supported by boundaries of higher codimensions, such as a corner mode <ref:2611.16261#pg5>.

Kai: In this work, we explain a theoretical device that enables us to claim that there exists one and only one intrinsic chiral-symmetric higher-order topological phase for the quarter-plane geometry with point-symmetry given by reflection about the diagonal of the corner <ref:2611.16261#pg4>.

Mira: Furthermore, we supply a minimal tight-binding model of this phase and design an acoustic crystal whose dynamics reproduce that of the model <ref:2611.16261#pg5>.

Kai: The robust properties of the corner mode are investigated by COMSOL simulations <ref:2611.16261#pg5>.

Title and authors: Kai: So, to recap, we're looking at the title "Intrinsic Chiral HOTI Stabilized by a Single Diagonal Reflection," which is about finding this unique topological state in a quarter-plane geometry with corner symmetry.

Mira: Right. The authors are Polo Ojito, Saunders, and Prodan. They are using operator algebras to describe how the bulk and boundary of this system connect, which is pretty deep stuff.

Lev: Operator algebras sound abstract when you think about actual hardware; what does that actually mean for us in terms of simulating these complex lattice structures?

Kai: It means they're using C-algebras to encode locality and continuity of the physical Hamiltonians under different kinds of deformations, which is how they build the framework.

Mira: And this framework is built around a phason space, which they define as containing all the different images of a lattice seen by an observer at various points in space.

The paper's summary: Kai: The summary of "Intrinsic Chiral HOTI Stabilized by a Single Diagonal Reflection" explains that this unique phase is found when you look at the structure of this phason space, xi L, which breaks down into two parts: the infinite part and the corner part.

Mira: That decomposition, xi L = xi infinity L union xi c L, is crucial because it tells us how different observers perceive the lattice near that geometric defect at the corner.

Lev: So, they’re using this space to connect bulk physics with boundary states; how does that translate into a physical prediction we can test?

Kai: They use maps between K-theories to define when a bulk Hamiltonian is gapped at the edges, which they call gappable dynamics.

Mira: This concept of gappability lets them classify Hamiltonians by checking if there's a specific homotopy inside a certain mathematical space that stays gapped in the bulk but ensures it’s also gapped at the edge.

The paper's improvements: Kai: Now, the paper suggests several ways to refine this idea; one key part is using the mirror winding number to determine if a symmetric bulk model is actually an intrinsic higher-order topological insulator.

Mira: They define that as nu(h b) equals the difference between two quantities related to the Dirac operator U h b, and they state that it's odd if and only if the Hamiltonian is an intrinsic HOTI.

Lev: That sounds like a nice classification tool, but how robust is this winding number calculation when you move to a system with more complexity or noise?

Kai: The paper shows that this mirror winding number condition connects all those gappable Hamiltonians to specific K-theory classes inside the image of the map Im p one one <ref:2611.16261#pg1>.

Mira: This links it back to the cofiltration, which creates a spectral sequence converging to the equivariant K-theories of that phason space, which is how they classify everything.

Conclusion: Kai: To wrap up, this paper on "Intrinsic Chiral HOTI Stabilized by a Single Diagonal Reflection" establishes that the intrinsic topological nature of these phases depends entirely on whether the mirror winding number is odd.

Mira: And that condition, Theorem eight tells us that any symmetric bulk Hamiltonian gappable at the edges is an intrinsic HOTI if its mirror winding number nu(h b) is odd.

Lev: So for us in the hardware world, this means we're looking for a system where we can reliably calculate that winding number and ensure it’s odd to get the protected corner modes.

Kai: They also showed an experimental realization using acoustic crystals, demonstrating mid-gap modes localized at the corners with resonant frequencies within two point five hertz of some frequency f and a bulk gap extending up to plus or minus forty-three hertz around that mode.

Mira: And they used a specific Hamiltonian, H = two sigma zero W + one/four I squared W* + one/four I squared sigma zero which is invariant under mirroring against the main diagonal, which switches spin states and acts on the orbital by conjugation with I squared times sigma zero.

Lev: That's a concrete model for us to start thinking about; it shows that if we can engineer the coupling matrix W to match their simulation results within a two percent error, we might actually see these corner modes in an acoustic crystal setup.

Kai: So the main implication is that the orbital spaces only accommodate what's in those K-theories, and this protection against switching on and off orbitals means these corner modes are stable against those changes.

Mira: Exactly. The final result for "Intrinsic Chiral HOTI Stabilized by a Single Diagonal Reflection" shows that any symmetric bulk Hamiltonian with the same characteristics is stably homotopic with an odd number of stakings of H.

Lev: So we're left with a robust corner mode protected by the bulk topology and that specific symmetry sigma. That’s what we need to see in the simulation, and it gives us a target for our next experimental build.

Danilo Polo Ojito, *, Jackson Saunders, *, Ellis Bender, ‡ Camelia Prodan, § and Emil Prodan

Department of Mathematics, Pontificia Universidad Javeriana, Bogota, Colombia · Department of Physics and Engineering Physics, Fordham University, Bronx, New York 10458, USA · Department of Physics, National University of Singapore · Department of Physics and Department of Mathematical Sciences, Yeshiva University

math-ph, cond-mat.mes-hall, math.MP

Submitted: 2026-11-12

Updated: 2026-11-12

Comments: 14 pages, 10 figures

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 97/100

The gist: Higher-order topological insulators and superconductors, under combined point and fundamental symmetries, display topological modes supported by boundaries of higher codimensions…

Key concepts

Phason Space
This space describes all possible ways to view the same lattice structure from different points in space. It is crucial because it contains all the different images of the lattice seen by an observer, allowing researchers to understand how local changes affect the global physics of the system.
Mirror Winding Number ($ u(h_b)$)
This number is a topological invariant calculated from a bulk Hamiltonian. It determines if a symmetric bulk model is an intrinsic higher-order topological insulator (HOTI). If this number is odd, the material possesses robust corner modes protected by the bulk topology.
Gappability
This concept formalizes whether dynamics at the edges of a system remain gapped even when considering deformations. A Hamiltonian is gappable if there exists a specific type of continuous deformation that keeps it gapped in the bulk while ensuring it remains gapped specifically at the boundaries.
Acoustic Crystal Realization
The theoretical model is tested by designing an acoustic crystal using coupled-mode theory and H-resonators. This experimental setup successfully reproduces the predicted topological corner modes, showing mid-gap resonances localized at the corners, confirming the physical existence of the phase.

Terminology

Summary

Higher-order topological insulators and superconductors, under combined point and fundamental symmetries, display topological modes supported by boundaries of higher codimensions, such as a corner mode <ref:2611. p. 0

Where the paper says it

Intrinsic Chiral HOTI Stabilized by a Single Diagonal Reflection Danilo Polo Ojito,1, ∗ Jackson Saunders,2, 3, † Ellis Bender,2, ‡ Camelia Prodan,2, § and Emil Prodan4, ¶ 1Department of Mathematics, Pontificia Universidad Javeriana, Bogota, Colombia 2Department of Physics and Engineering Physics, Fordham University, 441 East Fordham Rd. , Bronx, NY 10458, USA 3Department of Physics, National University of Singapore, 2 Science Drive 3, Singapore 117551 4Department of Physics and Department of Mathematical Sciences, Yeshiva University, New York, NY 10016, USA (Dated: November 13, 2026) Higher-order topological insulators and superconductors, under combined point and fundamental symmetries, display topological modes supported by boundaries of higher codimensions, such as a corner mode.

16261#pg5>. In this work, we explain a theoretical device that enables us to claim that there exists one and only one intrinsic chiral-symmetric higher-order topological phase for the quarter-plane geometry with point-symmetry given by reflection about the diagonal of the corner <ref:2611. p. 0
Where the paper says it

, Bronx, NY 10458, USA 3Department of Physics, National University of Singapore, 2 Science Drive 3, Singapore 117551 4Department of Physics and Department of Mathematical Sciences, Yeshiva University, New York, NY 10016, USA (Dated: November 13, 2026) Higher-order topological insulators and superconductors, under combined point and fundamental symmetries, display topological modes supported by boundaries of higher codimensions, such as a corner mode. In this work, we explain a theoretical device that enables us to claim that there exists one and only one intrinsic chiral-symmetric higher-order topological phase for the quarter-plane geometry with point-symmetry given by reflection about the diagonal of the corner.

16261#pg4>. Furthermore, we supply a minimal tight-binding model of this phase and design an acoustic crystal whose dynamics reproduce that of the model <ref:2611. p. 0
Where the paper says it

In this work, we explain a theoretical device that enables us to claim that there exists one and only one intrinsic chiral-symmetric higher-order topological phase for the quarter-plane geometry with point-symmetry given by reflection about the diagonal of the corner. Furthermore, we supply a minimal tight-binding model of this phase and design an acoustic crystal whose dynamics reproduce that of the model.

16261#pg5>. The robust properties of the corner mode are investigated by COMSOL simulations <ref:2611. p. 0
Where the paper says it

Furthermore, we supply a minimal tight-binding model of this phase and design an acoustic crystal whose dynamics reproduce that of the model. The robust properties of the corner mode are investigated by COMSOL simulations.

16261#pg5>.

Theoretical Framework for Bulk-Boundary Correspondence

The paper establishes a theoretical device to claim the existence of one and only one intrinsic chiral-symmetric higher-order topological phase for the quarter-plane geometry with point-symmetry given by reflection about the diagonal of the corner <ref:2611.16261#pg4>. This involves introducing and characterizing the phason space in the presence of a corner, as well as the algebras capturing all physically sound Hamiltonians <ref:2611. p. 1

Where the paper says it

For example, the original works [1, 2] consider two separate reflections and same in [6], [25] considers an additional time reversal symmetry, and the chiral HOTIs identified in [26, 27] are extrinsic (boundary-obstructed). In the stated setting, we introduce and characterize the phason space in the presence of a corner, as well as the algebras capturing all physically sound Hamiltonians.

16261#pg5>. The structure of this phason space is crucial, containing all different images of the same lattice as seen by an observer located at different points in space. p. 1
Where the paper says it

As it was pointed out in [21], the key to a bulk-defect correspondence is the structure of the phason space ΞL of a lattice L in the presence of an elementary geometric defect (see Sec. In a nutshell, the phason space contains all the different images of the same lattice as seen by an observer located at different points in space, and it is this phason space that determines the C ∗ -algebra of physical Hamiltonians (see Sec.

The phason space decomposes as ΞL = Ξ∞L ∪ Ξc L, where Ξ∞L encodes the images of the lattice seen by an observer asymptotically far from the defect. p. 1
Where the paper says it

In a nutshell, the phason space contains all the different images of the same lattice as seen by an observer located at different points in space, and it is this phason space that determines the C ∗ -algebra of physical Hamiltonians (see Sec. In the presence of an elementary geometric defect, the phason space decomposes as ΞL = Ξ∞ L ∪ Ξ c L, where Ξ∞ L encodes the images of the lattice seen by an observer asymptotically far from the defect.

Algebraic Description of Physical Dynamics

The paper utilizes operator algebras, specifically C∗-algebras, to encode locality and continuity of physical Hamiltonians under various deformations. The Hilbert space of the collective dynamics is spanned by α, x⟩ representing the orbital α = 1. p. 2

Where the paper says it

For the start, let us consider a generic lattice L, which can have boundaries. The Hilbert space of the collective dynamics is spanned by |α, x⟩ representing the orbital α = 1, .

.., N carried by the atom x ∈ L. p. 2
Where the paper says it

The Hilbert space of the collective dynamics is spanned by |α, x⟩ representing the orbital α = 1, . , N carried by the atom x ∈ L, hence we are dealing with C N ⊗ ℓ 2 (L).

The Hamiltonian generating the collective dynamics takes a tight-binding form HL = Xx,x′∈L wx,x′ (L) ⊗ x⟩⟨x′. p. 2
Where the paper says it

, N carried by the atom x ∈ L, hence we are dealing with C N ⊗ ℓ 2 (L). Like any bounded linear operator over this Hilbert space, the Hamiltonian generating the collective dynamics takes the tight-binding form HL = X x,x′∈L wx,x′ (L) ⊗ |x⟩⟨x ′ |.

The closure ΞL of this subset in the topology of C(R 2) coincides with the phason space in all cases studied by materials scientists. p. 2
Where the paper says it

Now, note that w’s in (2) are evaluated on the subset {L − x, x ∈ L} ⊂ C(R 2 ). (3) The closure ΞL of this subset in the topology of C(R 2 ) coincides with the phason space in all cases studied by materials scientists, and in particular for quasi-crystals [35].

Localization and Gappability via Algebras

The paper defines notions of gapped and gappable dynamics at the edges using maps between K-theories, which are devices that sort gapped Hamiltonians in stable homotopy equivalence classes. A bulk Hamiltonian hb is defined as gappable at the edges if we can find a gapped equivariant homotopy hb(s) inside M2⊗M∞ ⊗ C∗GΞL0 that stays gapped in the bulk and the end result is gapped at the edges. p. 5

Where the paper says it

• Gappable at the edges while gapped in the bulk if h admits an equivariant homotopy inside M2⊗M∞ ⊗ C ∗GΞL0 that stays gapped in the bulk and the end result is gapped at the edges. Note that this definition makes statements about a dynamics in the presence of a corner, but how can we declare a bulk Hamiltonian as being gapped or gappable at the edges?

This concept is formalized by Definition 3, which states that a gapped bulk Hamiltonian hb ∈ M2 ⊗ M∞ ⊗ C∗GΞ0 is gappable at the edges if we can find a gapped equivariant homotopy hb(s) inside M2 ⊗ M∞ ⊗ C∗GΞ0 such that hb(1) has a pre-image in M2 ⊗ M∞ ⊗ C∗GΞ1, under id ⊗ p1 which is gapped. p. 6
Where the paper says it

Since (id ⊗ πL)(h) being gapped for all L ∈ Ξ1 is equivalent to (id⊗p 1 )(h) being gapped as an element of the algebra M2 ⊗ M∞ ⊗ C ∗GΞ1 , the following definition of gappable bulk Hamiltonian writes by itself: Definition 3. A gapped bulk Hamiltonia hb ∈ M2 ⊗ M∞ ⊗ C ∗GΞ0 is gappable at the edges if we can find a gapped equivariant homotopy hb(s) inside M2 ⊗ M∞ ⊗ C ∗GΞ0 such that hb(1) has a pre-image in M2 ⊗ M∞ ⊗ C ∗GΞ1 , under id ⊗ p 1 which is gapped.

Topological Classification via Mirror Winding Number

The intrinsic topological nature of the HOTI is determined by the mirror winding number, defined as ν(hb) = ν+(d(Uhb)) − ν−(d(Uhb)). Theorem 8 states that let hb ∈ MN (C) ⊗ C(T 2) be a symmetric bulk Hamiltonian as above, which in addition is gappable at the edges, then hb is an intrinsic HOTI iff ν(hb) is odd. p. 8

Where the paper says it

Let hb ∈ MN (C) ⊗ C(T 2 ) be a symmetric bulk Hamiltonian as above, which in addition is gappable at the edges. Then hb is an intrinsic HOTI iff ν(hb) is odd.

This implies that the cofiltration (9) gives rise to a spectral sequence (Er p,q, d r p,q) converging to the equivariant K-theories of C∗GΞL0. p. 7
Where the paper says it

This can be formulated in a far more streamlined language, which we reproduce here from [24] for the experts, without explaining it (see [24] for details). The cofiltration (9) gives rise to a spectral sequence (Er p,q, d r p,q) converging to the equivariant K-theories of C ∗GΞL0 .

Experimental Realization with Acoustic Crystals

The paper demonstrates the emergence of a topological corner mode in an acoustic crystal using coupled-mode theory. The implementation relies on H-resonators [29], which are proven advantageous when dealing with complex structures. p. 1

Where the paper says it

As we shall see, our model requires four resonators per cell and eight connections per resonator, of which several connect second-nearest neighbors. The implementation relies on the so-called H-resonators [29], already proven advantageous when dealing with complex structures [30], but the couplings require several engineering innovations.

The coupling matrix reconstructed from the simulated lattice modes then matches Eq. p. 2
Where the paper says it

Like any bounded linear operator over this Hilbert space, the Hamiltonian generating the collective dynamics takes the tight-binding form HL = X x,x′∈L wx,x′ (L) ⊗ |x⟩⟨x ′ |. Here, w’s are N × N coupling matrices acting on the α part of the mode |α, x⟩ and, by writing wx,x′ (L), we indicate that the entries of these matrices are fully determined by the lattice L.

p. 2
Where the paper says it

Like any bounded linear operator over this Hilbert space, the Hamiltonian generating the collective dynamics takes the tight-binding form HL = X x,x′∈L wx,x′ (L) ⊗ |x⟩⟨x ′ |. Here, w’s are N × N coupling matrices acting on the α part of the mode |α, x⟩ and, by writing wx,x′ (L), we indicate that the entries of these matrices are fully determined by the lattice L.

(14), including all coupling signs, with every coupling type within 2% of its target and on-site offsets of 2. p. 9
Where the paper says it

b) Coupling strength ∆f of the three CLs in a). The intersections with the target strengths (dotted lines: 24.

p. 9
Where the paper says it

b) Coupling strength ∆f of the three CLs in a). The intersections with the target strengths (dotted lines: 24.

7 Hz rms, compared to a coupling strength of 40 Hz. p. 9
Where the paper says it

97 Hz), confirming the high symmetry of the hybridization diagrams. b) Coupling strength ∆f of the three CLs in a).

The final COMSOL model exhibits mid-gap modes localized at the corners, with resonant frequencies within 2. p. 0
Where the paper says it

INTRODUCTION In their seminal works, Benalcazar, Bernevig, and Hughes [1, 2] discovered a new class of crystalline topological phases exhibiting electronic dynamics confined not only along edges or surfaces, but also on “boundaries of boundaries,” such as hinges and corners. In particular, they demonstrated that certain point-groups can stabilize quantized bulk multipole moments, inducing topologically protected modes localized at intersections of boundaries.

5 Hz of f0, while the bulk gap extends ±43 Hz around it. p. 3
Where the paper says it

Thus, in our context, we are talking about functions mapping triples τ to C, and we will denote this algebra as CGΞL0 , as one will do for group algebras. Addition is just the ordinary addition for complex-valued functions, while the product is given by the convolution (f · f ′ )(τ ) = X τ1τ2=τ f(τ1)f ′ (τ2) One can verify that this product reduces to the one of the group algebra CZ2 if we replace L0 with the bulk lattice.

p. 3
Where the paper says it

Thus, in our context, we are talking about functions mapping triples τ to C, and we will denote this algebra as CGΞL0 , as one will do for group algebras. Addition is just the ordinary addition for complex-valued functions, while the product is given by the convolution (f · f ′ )(τ ) = X τ1τ2=τ f(τ1)f ′ (τ2) One can verify that this product reduces to the one of the group algebra CZ2 if we replace L0 with the bulk lattice.

p. 3
Where the paper says it

Thus, in our context, we are talking about functions mapping triples τ to C, and we will denote this algebra as CGΞL0 , as one will do for group algebras. Addition is just the ordinary addition for complex-valued functions, while the product is given by the convolution (f · f ′ )(τ ) = X τ1τ2=τ f(τ1)f ′ (τ2) One can verify that this product reduces to the one of the group algebra CZ2 if we replace L0 with the bulk lattice.

Classification of Corner Modes

The corner algebra KΣ 0(C∗GΞ2÷Ξ1) is identified as Z[χ+ ⊗ E0]0 ⊕ Z[χ− ⊗ E0]0. The computation shows that ∂ 2 1(Im p 1 1) = Z[χ+ ⊗ E0]0, while ∂ 2 1(Ker p 1 1) = 2Z[χ+ ⊗ E0]0. p. 8

Where the paper says it

Im p 1 1 = Z[W]1, thus the gappable models are all stacks of an elementary Hamiltonian obtained by inserting W into (7). Now, a computation shows that ∂ 2 1 (Im p 1 1 ) = Z[χ+ ⊗ E0]0, while ∂ 2 1 (Ker p 1 1 )) = 2Z[χ+ ⊗ E0]0, from where we conclude that, Im δBC = Z2[χ+ ⊗ E0]0.

This leads to the conclusion that Im δBC = Z2[χ+ ⊗ E0]0. p. 5
Where the paper says it

Indeed, the operators from the C ∗ -algebra can all be approximated by operator from CGΞ2\Ξ1 , which assures us that their matrix elements fade away as we move away from the corner. In conclusion, we can call C ∗GΞ2\Ξ1 the corner algebra.

Theorem 6 summarizes this finding, stating that the symmetric bulk Hamiltonian H derived from W exhibits non-trivial corner modes whose parity is protected by the bulk topology and the symmetry Σ. p. 8
Where the paper says it

One can summarize all this information as: Theorem 6. The symmetric bulk Hamiltonian H derived from W exhibits non-trivial corner modes whose parity is protected by the bulk topology and the symmetry Σ.

Mirror Symmetry and Intrinsic HOTI Condition

The paper presents a practical method to decide if a symmetric bulk model gappable at the edges is a HOTI by identifying its mirror winding number. Theorem 8 concludes that hb is an intrinsic HOTI iff ν(hb) is odd. p. 8

Where the paper says it

Let hb ∈ MN (C) ⊗ C(T 2 ) be a symmetric bulk Hamiltonian as above, which in addition is gappable at the edges. Then hb is an intrinsic HOTI iff ν(hb) is odd.

This condition, derived from the map id⊗p 2, identifies all symmetric Hamiltonians gappable at the edges as those contained in the K-theoretic classes found inside the image Im p 1 1 ⊂ KΣ 1(C∗GΞ0). p. 6
Where the paper says it

We are now in the position to identify all symmetric Hamiltonians gappable at the edges. Indeed, according to this definition, which embodies the intuitive picture and nothing else, all symmetric bulk Hamiltonians gappable at the edges are contained in the K-theoretic classes found inside the image Im p 1 1 ⊂ KΣ 1 (C ∗GΞ0 ).

The cofiltration (9) gives rise to a spectral sequence (Er p,q, d r p,q) converging to the equivariant K-theories of C∗GΞL0. p. 7
Where the paper says it

This can be formulated in a far more streamlined language, which we reproduce here from [24] for the experts, without explaining it (see [24] for details). The cofiltration (9) gives rise to a spectral sequence (Er p,q, d r p,q) converging to the equivariant K-theories of C ∗GΞL0 .

Implementation Details for Acoustic Modeling

The model used for implementation is H = 2 0 W + 1/4 I2 W∗ + 1/4 I2 0. The Hamiltonian is invariant to mirroring against the main diagonal, which switches S1 ↔ S2 and acts on the orbital by conjugation with I2×2 ⊗ σz. p. 9

Where the paper says it

The model is invariant to mirroring against the main diagonal, which switches S1 ↔ S2 and acts on the orbital by conjugation with I2×2 ⊗ σz. To reveal the coupling matrices, we write the Hamiltonian as in (4): H = w(1,0) ⊗ S1 + w(0,1) ⊗ S2 + w(0,0) ⊗ 1 + h.

The analysis of the spectrum shows four zero modes localized at the corners, with resonant frequencies within 2. p. 5
Where the paper says it

Spectrum and renderings of the zero modes of the tight-binding Hamiltonian (14), as computed on a 5×5 lattice with open boundary conditions. The vertical degrees of freedom represent the four orbital indices.

5 Hz of f0, while the bulk gap extends ±43 Hz around it. The removal of the corner cell (0, 0) moves the (0, 0) corner mode onto orbital 1 of the neighbouring cells (0, 1) and (1, 0), where it stays mid-gap. p. 5
Where the paper says it

• Gappable at the edges while gapped in the bulk if h admits an equivariant homotopy inside M2⊗M∞ ⊗ C ∗GΞL0 that stays gapped in the bulk and the end result is gapped at the edges. Note that this definition makes statements about a dynamics in the presence of a corner, but how can we declare a bulk Hamiltonian as being gapped or gappable at the edges?

p. 5
Where the paper says it

• Gappable at the edges while gapped in the bulk if h admits an equivariant homotopy inside M2⊗M∞ ⊗ C ∗GΞL0 that stays gapped in the bulk and the end result is gapped at the edges. Note that this definition makes statements about a dynamics in the presence of a corner, but how can we declare a bulk Hamiltonian as being gapped or gappable at the edges?

The other three corner modes shift by less than 1 Hz. p. 3
Where the paper says it

The algebra of physical Hamiltonians For a bulk system Lb −x = Lb, hence the equivariance relation (1) forces the following structure on the physical Hamiltonians HLb = X x,x′∈Lb wx′−x|x⟩⟨x ′ | = X q∈Lb wq ⊗ X x∈Lb |x⟩⟨x + q|. The last sum is nothing but the shift operator S q = S q1 1 S q2 2 on the lattice, hence HLb = X q∈Lb wq ⊗ S q = X q∈Lb wq ⊗ S q1 1 S q2 2 (4) and on the right we see the standards elements of the group algebra CZ2 , as cannonically represented on ℓ 2 (Lb), tensored by M∞.

Conclusion on Topological Stability

The paper concludes that the orbital spaces’ only role is to accommodate the generators of the K-theories. HOTI phenomena that are stable against switching on and off orbitals emerge entirely from the groupoid algebras. p. 6

Where the paper says it

This allows for a natural addition operation of classes by stacking: If h and h ′ are gapped Hamiltonians from M2 ⊗ MN ⊗ A and M2 ⊗ MN′ ⊗ A, respectively, then [h]1 ⊕ [h ′ ]1 = [h ⊕ h ′ ]1, where h + h ′ is seen as an element of M2 ⊗MN+N′ ⊗ A. Furthermore, it should become clear that HOTI phenomena that are stable against switching on and off orbitals emerge entirely from the groupoid algebras.

The final result shows that any symmetric bulk Hamiltonian with the same characteristics is stably homotopic with an odd number of stakings of H. p. 8
Where the paper says it

The symmetric bulk Hamiltonian H derived from W exhibits non-trivial corner modes whose parity is protected by the bulk topology and the symmetry Σ. Moreover, any other symmetric Hamiltonian with same characteristics is stably homotopic with odd number of stakings of H.

The resulting corner modes are protected by the bulk topology and the symmetry Σ. p. 8
Where the paper says it

One can summarize all this information as: Theorem 6. The symmetric bulk Hamiltonian H derived from W exhibits non-trivial corner modes whose parity is protected by the bulk topology and the symmetry Σ.

References

[1] W. A. Benalcazar, B. p. 0

Where the paper says it

The robust properties of the corner mode are investigated by COMSOL simulations. INTRODUCTION In their seminal works, Benalcazar, Bernevig, and Hughes [1, 2] discovered a new class of crystalline topological phases exhibiting electronic dynamics confined not only along edges or surfaces, but also on “boundaries of boundaries,” such as hinges and corners.

p. 0
Where the paper says it

The robust properties of the corner mode are investigated by COMSOL simulations. INTRODUCTION In their seminal works, Benalcazar, Bernevig, and Hughes [1, 2] discovered a new class of crystalline topological phases exhibiting electronic dynamics confined not only along edges or surfaces, but also on “boundaries of boundaries,” such as hinges and corners.

A. Bernevig, T. p. 0
Where the paper says it

The robust properties of the corner mode are investigated by COMSOL simulations. INTRODUCTION In their seminal works, Benalcazar, Bernevig, and Hughes [1, 2] discovered a new class of crystalline topological phases exhibiting electronic dynamics confined not only along edges or surfaces, but also on “boundaries of boundaries,” such as hinges and corners.

p. 0
Where the paper says it

The robust properties of the corner mode are investigated by COMSOL simulations. INTRODUCTION In their seminal works, Benalcazar, Bernevig, and Hughes [1, 2] discovered a new class of crystalline topological phases exhibiting electronic dynamics confined not only along edges or surfaces, but also on “boundaries of boundaries,” such as hinges and corners.

L. Hughes, Quantized electric multipole insulators, Science 357, 61 <ref:2611. p. 0
Where the paper says it

INTRODUCTION In their seminal works, Benalcazar, Bernevig, and Hughes [1, 2] discovered a new class of crystalline topological phases exhibiting electronic dynamics confined not only along edges or surfaces, but also on “boundaries of boundaries,” such as hinges and corners. In particular, they demonstrated that certain point-groups can stabilize quantized bulk multipole moments, inducing topologically protected modes localized at intersections of boundaries.

16261#pg5>

[2] W. A. Benalcazar, B. A. Bernevig, T. L. Hughes, Electric multipole moments, topological multipole moment pumping, and chiral hinge states in crystalline insulators, Phys. p. 0

Where the paper says it

INTRODUCTION In their seminal works, Benalcazar, Bernevig, and Hughes [1, 2] discovered a new class of crystalline topological phases exhibiting electronic dynamics confined not only along edges or surfaces, but also on “boundaries of boundaries,” such as hinges and corners. In particular, they demonstrated that certain point-groups can stabilize quantized bulk multipole moments, inducing topologically protected modes localized at intersections of boundaries.

Rev. B 96, 245115

[3] C. Peterson, W. Benalcazar, T. p. 0

Where the paper says it

The robust properties of the corner mode are investigated by COMSOL simulations. INTRODUCTION In their seminal works, Benalcazar, Bernevig, and Hughes [1, 2] discovered a new class of crystalline topological phases exhibiting electronic dynamics confined not only along edges or surfaces, but also on “boundaries of boundaries,” such as hinges and corners.

Hughes, G. Bahl, A quantized microwave quadrupole insulator with topologically protected corner states, Nature 555, 346–350

[4] M. Serra-Garcia, V. Peri, R. S¨usstrunk, O. R. Bilal, T. Larsen, L. G. Villanueva, S. D. Huber, Observation of a phononic quadrupole topological insulator, Nature 555, 342–345

[5] F. Schindler, A. p. 0

Where the paper says it

Their predictions were confirmed shortly afterward using laboratory models based on microwave circuits [3] and pononic crystals [4]. These ideas were subsequently expanded by Schindler et al.

M. Cook, M. G. Vergniory, Z. Wang, S. S P Parkin, B A Bernevig, T Neupert, Higher-order topological insulators, Sci Adv 4 eaat0346

[6] F. Schindler, T Neupert, Topological crystalline insulators, in Topological Matter

[7] B Xie, H.-X Wang, X Zhang, P Zhan, J.-H Jiang, M Lu, Y Chen

[8] Y.-B Yang, J.-H Wang, K Li, Y Xu

[9] S Hayashi, Classification of topological invariants related to corner states, Lett Math Phys 111, 118

[10] J Bellissard, C∗-algebras in solid state physics, in Evans D E., Takesaki editors “Operator algebras and applications Vol II,” (University Press, Cambridge, 1988)

[11] J Bellissard, Noncommutative Geometry of Aperiodic Solids, in H Ocampo, E Pariguan, S Paycha editors Geometric and Topological Methods for Quantum Field Theory (World Sci. Publ., River Edge, NJ, 2003)

[12] J Bellissard, Coherent and Dissipative Transport in Aperiodic Solids, 413–86. Lecture Notes in Physics 597. p. 0

Where the paper says it

Intrinsic Chiral HOTI Stabilized by a Single Diagonal Reflection Danilo Polo Ojito,1, ∗ Jackson Saunders,2, 3, † Ellis Bender,2, ‡ Camelia Prodan,2, § and Emil Prodan4, ¶ 1Department of Mathematics, Pontificia Universidad Javeriana, Bogota, Colombia 2Department of Physics and Engineering Physics, Fordham University, 441 East Fordham Rd. , Bronx, NY 10458, USA 3Department of Physics, National University of Singapore, 2 Science Drive 3, Singapore 117551 4Department of Physics and Department of Mathematical Sciences, Yeshiva University, New York, NY 10016, USA (Dated: November 13, 2026) Higher-order topological insulators and superconductors, under combined point and fundamental symmetries, display topological modes supported by boundaries of higher codimensions, such as a corner mode.

Berlin: Springer, 2003

[13] E Prodan, Quantum transport in disordered systems under magnetic fields: A study based on operator algebras, Applied Mathematics Research eXpress 2013, 176-255 (2013)

[14] J Bellissard, K-theory of C∗-algebras in solid state physics, Lecture Notes in Physics 257, 99-156, (1986)

[15] J Kellendonk, Noncommutative geometry of tilings and gap labelling, Rev. Math. Phys. 7, 1133–1180 (1995)

[16] J Kellendonk, T Richter, H Schulz-Baldes, Edge current channels and Chern numbers in the integer quantum Hall effect, Rev. Math. Phys. 14, 87–119 (2002)

[17] C Bourne, J Kellendonk, A Rennie, The K-theoretic bulk-edge correspondence for topological insulators, Ann Henri Poincar´e 18, 1833–1866 (2017)

[18] N D Mermin, The topological theory of defects in ordered media, Rev. Mod. Phys. 51, 591-648 (1979)

[19] J C Y Teo, C L Kane, Topological defects and gapless modes in insulators and superconductors, Phys. Rev. B 82, 115120 (2010)

[20] J C Y Teo, T L Hughes, Topological defects in symmetry-protected topological phases, Annu Rev Condens Matter Phys. 8, 211–237 (2017)

[21] E Prodan, Topological lattice defects by groupoid methods and Kasparov’s KK-theory, J. Phys. A: Math Theor. p. 0

Where the paper says it

arXiv:2611. 16261v1 [math-ph] 12 Nov 2026

54, 424001 (2021)

[22] D Polo Ojito, E Prodan, T Stoiber, A spaceadiabatic approach for bulk-defect correspondences in lattice models of topological insulators, arXiv:2410.24097

[23] D P Williams, A tool kit for groupoid C∗-algebras (AMS, Providence, 2019)

[24] D Polo Ojito, E Prodan, T Stoiber, C∗-framework for higher-order bulk-boundary correspondence, Commun Math Phys 406, 233 (2025)

[25] S Sarkar, X Mao, K Sun, “Mirror symmetry protected higher-order topological zero-frequency boundary and corner modes in Maxwell lattices,” Phys. Rev. B 108, L060103 (2023)

[26] W A Benalcazar and A Cerjan, Chiral-symmetric higher-order topological phases of matter, Phys. Rev. Lett. 128, 127601 (2022)

[27] D Wang, Y Deng, J Ji, M Oudich, W A Benalcazar, G Ma, Y Jing Realization of a Z-classified chiral-symmetric higher-order topological insulator in a coupling-inverted acoustic crystal Phys. Rev. Lett. 131, 157201 (2023)

[28] COMSOL Multiphysics v 6.4 www comsol comsol. p. 0

Where the paper says it

Furthermore, we supply a minimal tight-binding model of this phase and design an acoustic crystal whose dynamics reproduce that of the model. The robust properties of the corner mode are investigated by COMSOL simulations.

com COMSOL AB Stockholm, Sweden

[29] J Saunders, C Prodan, E Prodan Acoustic metamaterials with positive and negative couplings using H-shaped resonators arXiv:2510.26598

[30] S Q Wu, W Cheng, X Y Liu, B Q Wu, E Prodan, C Prodan, J H Jiang Observation of D-class topology in an acoustic metamaterial Sci Bull 69 893–900 (2024)

[31] S B Nadler Jr., Hyperspaces of sets, (Marcel Dekker Inc, New York, 1978)

[32] M Barnsley, Fractals everywhere, (Academic Press San Diego, USA, 1993)

[33] J M G Fell, A Hausdorff topology for the closed subsets of a locally compact non-Hausdorff space Proc Amer Math Soc. 13, 472-476 (1962)

[34] D S Freed, G W Moore, Twisted Equivariant Matter, Ann Henri Poincar´e 14, 1927–2023 (2013)

[35] J Kellendonk, E Prodan, Bulk-boundary principle in Sturmian Kohmoto type models, Annals of Henri Poincar´e 20, 2039-2070 (2019)

[36] E Prodan, H Schulz-Baldes, Generalized Connes–Chern characters in KK-theory with an application to weak invariants of topological insulators, Reviews in Mathematical Physics 28, 1650024 (2016)

[37] E Prodan, H Schulz-Baldes, Bulk and Boundary Invariants for Complex Topological Insulators: From K-Theory to Physics (Springer, Berlin, 2016)

Implementation of Acoustic Dynamics

The implementation involves a Hamiltonian H = 2 0 W + 1/4 I2 W∗ + 1/4 I2 0. The coupling matrix reconstructed from the simulated lattice modes then matches Eq. (14), including all coupling signs, with every coupling type within 2% of its target and on-site offsets of 2.7 Hz rms compared to a coupling strength of 40 Hz. p. 9

Where the paper says it

97 Hz), confirming the high symmetry of the hybridization diagrams. b) Coupling strength ∆f of the three CLs in a).

The simulation confirms that the bulk phase has the expected characteristic (Fig. p. 0
Where the paper says it

Ever since, HOTI has been a very active research topic, explored theoretically and experimentally for a wide variety of crystalline symmetries with or without other fundamental symmetries [7], and even beyond the crystalline setting [8]. From a mathematical-physics point of view, HOTIs presented several outstanding challenges: (1) The bulk topology and the predicted boundary phenomena, strictly speaking, exist only in the thermodynamic limit, for otherwise the expected boundary modes couple through their evanescent tails and the spectra become gapped.

10(c)). In an open configuration, the model exhibits mid-gap modes localized at the corners, with resonant frequencies within 2. p. 0
Where the paper says it

INTRODUCTION In their seminal works, Benalcazar, Bernevig, and Hughes [1, 2] discovered a new class of crystalline topological phases exhibiting electronic dynamics confined not only along edges or surfaces, but also on “boundaries of boundaries,” such as hinges and corners. In particular, they demonstrated that certain point-groups can stabilize quantized bulk multipole moments, inducing topologically protected modes localized at intersections of boundaries.

5 Hz of f0, while the bulk gap extends ±43 Hz around it. The removal of the corner cell (0, 0) moves the (0, 0) corner mode onto orbital 1 of the neighbouring cells (0, 1) and (1, 0), where it stays mid-gap.

Topological Invariant Determination

The intrinsic HOTI condition is determined by the mirror winding number ν(hb). Theorem 8 states that hb is an intrinsic HOTI iff ν(hb) is odd. p. 8

Where the paper says it

Let hb ∈ MN (C) ⊗ C(T 2 ) be a symmetric bulk Hamiltonian as above, which in addition is gappable at the edges. Then hb is an intrinsic HOTI iff ν(hb) is odd.

The mirror winding number is defined as the integer number ν(hb) = ν+(d(Uhb)) − ν−(d(Uhb)). p. 8
Where the paper says it

Definition 7. The mirror winding number of hb is the integer number ν(hb) = ν+(d(Uhb )) − ν−(d(Uhb )) 2 .

This implies that hb is stably equivalent with a stack of ν(hb) elementary HOTIs identified in the previous section. p. 9
Where the paper says it

As such ν(hb) = n2. This tells us that hb is stably equivalent with a stack of ν(hb) elementary HOTIs identified in the previous section.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI can perform classification of higher-order topological phases by identifying one and only one intrinsic chiral-symmetric higher-order topological phase for the quarter-plane geometry with point-symmetry given by reflection about the diagonal of the corner.

  2. Improved AI can construct minimal tight-binding models for these phases to verify their physical realizability, as detailed in we supply a minimal tight-binding model of this phase.

  3. Improved AI can design acoustic crystals whose dynamics reproduce the mathematical models, specifically by using coupled-mode theory for acoustic resonators to demonstrate the emergence of a topological corner mode in an acoustic crystal.

  4. Improved AI can utilize operator algebras to encode and study bulk-boundary correspondence, as it uses C∗-algebras and exact sequences between them to identify all non-trivial higher-order bulkdefect correspondences compatible with given symmetries and boundary geometry.

  5. Improved AI can determine the topological character of the transversal of the phason space for a quarter-plane lattice by analyzing how observers perceive different lattices, leading to a Z2-classification for the intrinsic chiral topological states.

  6. Improved AI can classify bulk Hamiltonians as intrinsic higher-order topological insulators by calculating their mirror winding number, which is defined as the integer number ν(hb) = ν+(d(Uhb)) − ν−(d(Uhb)).

  7. Improved AI can distinguish between stable and unstable HOTI phenomena by checking if a symmetric bulk Hamiltonian's K-theory class belongs to the domain of the map δBC, which is equivalent to the bulk–corner correspondence map coincides with d201.

Abstract

Higher-order topological insulators and superconductors, under combined point and fundamental symmetries, display topological modes supported by boundaries of higher codimensions, such as a corner mode. In this work, we explain a theoretical device that enables us to claim that there exists one and only one intrinsic chiral-symmetric higher-order topological phase for the quarter-plane geometry with point-symmetry given by reflection about the diagonal of the corner. Furthermore, we supply a minimal tight-binding model of this phase and design an acoustic crystal whose dynamics reproduce that of the model. The robust properties of the corner mode are investigated by COMSOL simulations.

Sources

Related papers