Exclusive cross section measurements of 12 C(n,p n) and 12 C(n,d n) reactions

arXiv:2611.16075 · nucl-ex · Submitted 2026-11-11 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Nuclear Experiment. The day in nuclear experiment: beams, targets and what came out.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Exclusive cross section measurements of 12 C(n,p n) and 12 C(n,d n) reactions".

Mira: Here's the gist of the paper. Exclusive cross section measurements of 12C(n,p n) and 12C(n,d n) reactions provide new data for nuclear data evaluations by extending measurements to higher incident neutron energies and measuring previously unmeasured channels on Page 1>.

Kai: Experimental Setup and Data Acquisition The experiment utilized a single-crystal chemical vapor deposited (sCVD) diamond detector at LANSCE to measure neutron-induced reactions on carbon Protons were accelerated to 800 MeV and impinged on a tungsten spallation target at the Los Alamos Neutron Science Center (LANSCE) This produced fast neutrons with a broad energy distribution from 0 to above 600 MeV, with 1.8 µs separating each group of neutrons due to the pulse structure of the proton beam The data can be visualized by plotting the reconstructed reaction Q value, which is calculated by subtracting the incident neutron energy from the energy deposited in the detector Cross Section Measurements and Comparisons The work extends cross section measurements of four additional reaction channels: 12C(n,p2) 12B, 12C(n,p3+4) 12B, 12C(n,d1) 11B, and 12C(n,d2) 11B Notably, this is the first cross section measurement for 12C(n,d2) 11B Combined with the data of Ref.

4: , the sum of these partial cross sections reproduces the 12C(n,p)12B and 12C(n,d)11B total cross sections up to 17.3 MeV and 21.6 MeV, respectively The measurements are compared with recent data from EXFOR as well as TALYS calculations Uncertainty Analysis and Normalization The total uncertainties for the cross section measurements include both statistical and systematic contributions, but are generally dominated by statistical uncertainties, typically between 10-30% Several systematic uncertainties also affect the total uncertainty The normalization uncertainty is fully correlated The efficiency correction uncertainty is fully correlated In this work, the sources of uncertainty with lesser contributions to the total uncertainty are fully correlated, while the sources of uncertainty with greater contribution to the total uncertainty are uncorrelated The measurements presented in this work supply tighter constraints for reaction models and future nuclear data evaluations The summed 12C(n,p)12B and 12C(n,d)11B cross sections clearly illustrate the current deficiencies in nuclear data evaluation libraries These measurements will be beneficial as inputs for empirical simulation packages, such as Mcnp, Menate r, neuSIM4, and some Geant4 physics lists The measurements presented in this work supply tighter constraints for reaction models and future nuclear data evaluations.

Title and authors: Kai: Now, let's look closer at the title of this paper, "Exclusive cross section measurements of twelve C(n,p n) and twelve C(n,d n) reactions <ref:2611.16075#pg1,Exclusive cross section measurements of>." What does that really mean for the reader?

Mira: It means we are focusing only on those specific reactions where neutrons hit carbon-twelve and produce either a proton or a deuteron <ref:2611.16075#pg1>. That’s what "exclusive" implies—we aren't looking at all possible outcomes; we are isolating these specific channels.

Lev: In terms of the physics, it means they are getting detailed information on the pathways that lead to these specific light particle production events from neutron bombardment. It’s much more granular than just measuring total reaction rates.

Kai: Exactly. They are pushing for precision in those specific outputs, which is what we need when we're trying to build better models of how nuclei respond to incoming energy.

Mira: The authors are aiming to provide data that can be directly plugged into existing nuclear data evaluations, especially those used for things like ENDF/B-VIII.zero or TALYS calculations <ref:2611.16075#pg2>.

Lev: That’s the practical goal—to give the community a solid benchmark against which to test their reaction models for these specific light nuclei at higher energies.

Kai: So, it's not just new data; it's data targeted precisely at refining the models used to describe those specific interaction pathways.

Mira: And because they are measuring up to thirty-five MeV incident neutron energy for some of the channels, they are probing a different energy regime than previous work.

Lev: That higher energy is what makes this interesting for error correction research; it tests how well the models hold up when you push them out past the lower energies where most of our current data exists.

Kai: So, we're looking at high-energy exclusive channels on carbon-twelve which is a specific area where many reaction models have been known to have weaknesses <ref:2611.16075#pg1>.

Mira: And that weakness is what this work aims to illuminate by providing these detailed, measured cross sections.

Lev: It sets a clear target for our error correction work: we need simulation inputs that accurately represent these higher energy exclusive channels so we can properly assess the accuracy of the underlying physics models.

The paper's summary: Kai: So, let's go over what the abstract boils down to in this paper. They are using a single-crystal chemical vapor deposited diamond detector at LANSCE to measure neutron-induced reactions on carbon protons that were accelerated to eight hundred MeV <ref:2611.16075#pg2,were accelerated to 800 MeV>.

Mira: The core of the summary is extending cross section measurements for four additional channels: 12C(n,p2) 12B up to twenty-six MeV, and (n,p3+four) 12B up to twenty-three MeV <ref:2611.16075#pg1,12C(n,p2) 12B up to>.

Lev: And they also added the deuteron channels: (n,d1) 11B up to thirty-five MeV and the (n,d2) 11B channel up to twenty-one MeV <ref:2611.16075#pg1>.

Kai: What’s important is that this work is the first cross section measurement for that very specific (n,d2) 11B reaction <ref:2611.16075#pg1>. That’s a significant finding on its own.

Mira: And they say that when you combine these partial cross sections—the (n,p) and (n,d) ones—they reproduce the total cross sections for the (n,p) 12B and (n,d) 11B channels up to energy limits of twenty-one point six MeV and twenty-one point six MeV respectively <ref:2611.16075#pg1>.

Lev: That reproduction against TALYS calculations is a big deal. It shows that the way they are modeling these partial reactions is consistent with how those theoretical models predict the total behavior in that energy range.

Kai: So, it’s not just reporting numbers; it’s showing a consistency between measured pieces and theoretical predictions for the total reaction behavior.

Mira: And they also spend time detailing the normalization, background subtraction, and efficiency correction methods in their supplementary material to show how robust those results are.

Lev: The efficiency correction is critical because they have thin diamond detectors, about half a millimeter thick, and products can easily escape without depositing all their energy. They use simulations with Menate r in Geant4 to estimate that probability of escape.

Kai: So the whole paper is structured to show not just the raw data, but also the rigorous methods they used to get those results, which is important for building trust in the measurements.

Mira: And it sets up a clear comparison with previous data from ENDF/B-VIII.zero and TALYS calculations across several key sections of their work <ref:2611.16075#pg2>.

The paper's improvements: Kai: Moving onto the improvements section, they point out that the new cross section data for 12C(n,p2) allows ENDF/B-evaluation to be updated with more recent measurements at higher energies <ref:2611.16075#pg1>.

Mira: That’s a direct improvement for nuclear data evaluation because it gives those libraries a chance to incorporate these newer, higher-energy measurements directly into their calculations.

Lev: This means we can expect more accurate nuclear data evaluations for exclusive channels, especially those involving protons, because we're feeding them data that is closer in energy to where the reactions are actually happening.

Kai: And they highlight how the new measurements provide tighter constraints for reaction models by comparing experimental results with TALYS calculations, which helps identify deficiencies in the modeling of direct and/or compound components.

Mira: That comparison between experiment and theory is what really drives model refinement; it shows us where the theoretical description is missing something specific in its treatment of the interaction dynamics.

Lev: If the models are off, we need to know that so we can focus our efforts on improving those parts of the physics descriptions, whether that's direct scattering or compound nucleus formation.

Kai: And they stress that these measurements constrain nuclear reaction models by providing data that are especially useful if evaluations are performed for exclusive channels because there’s a scarcity of partial cross section data above twenty MeV.

Mira: That directly tackles the problem we have—the lack of partial cross section data above twenty MeV for these reactions, and this work fills that gap with new measurements.

Lev: It also improves the reliability of simulation inputs, as it addresses the need for accurate cross section data for simulation inputs in packages used to simulate neutron interactions with detectors like diamond and organic scintillators.

Kai: So, the improvements aren't just about getting new numbers; they are about making those numbers usable and trustworthy inputs for our downstream modeling work.

Conclusion: Mira: To wrap up, this paper presents measurements that supply tighter constraints for reaction models and future nuclear data evaluations by focusing on the (n,p) 12B and (n,d) 11B channels <ref:2611.16075#pg1>.

Kai: The summed cross sections clearly illustrate the current deficiencies in nuclear data evaluation libraries when we look at those specific channels up to twenty-one point six MeV.

Lev: And these measurements are beneficial as inputs for empirical simulation packages like Mcnp, Menate r, neuSIM4, and some Geant4 physics lists. They give us better tools for planning and analysis of experiments using that material.

Mira: Ultimately, this work supplies tighter constraints for reaction models and future nuclear data evaluations by providing the necessary data to correct those deficiencies we’ve been seeing.

Lev: I think what this paper does is provide the specific empirical evidence needed to guide where we should focus our theoretical efforts next when developing these reaction models.

Kai: It's a solid piece of work that gives us better inputs for everything from fundamental nuclear data evaluations to experimental planning and simulation tools.

Mira: This study on exclusive cross section measurements of twelve C(n,p n) and twelve C(n,d n) reactions is a valuable contribution to the field <ref:2611.16075#pg1,exclusive cross section measurements of>.

Lev: It gives us the necessary constraints for better error correction in our simulations when dealing with these specific channels.

A. Wantz, A. N. Kuchera, W. F. Rogers, T. Baumann, C. Boothby, M. Devlin, N. Frank, P., § Gueye, § K., § J., § S., Δ A. LaRochelle, T. Redpath, T. Tran Nguyen, J. R. Winkelbauer

Facility for Rare Isotope Beams, Michigan State University · Physics and Astronomy Department, Michigan State University · Department of Physics, Davidson College · Department of Physics, Indiana Wesleyan University · Los Alamos National Laboratory

nucl-ex

Submitted: 2026-11-11

Updated: 2026-11-11

Journal ref: Phys. Rev. C 114, 034619 Published 17 September, 2026

DOI: 10.1103/j2m6-v12v

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 74/100

The gist: Exclusive cross section measurements of 12C(n,p n) and 12C(n,d n) reactions provide new data for nuclear data evaluations by extending measurements to higher incident neutron energies and measuring…

Key concepts

Exclusive Cross Section
This refers to the probability of a specific neutron reaction occurring, such as knocking out a proton or deuteron from the carbon nucleus. Instead of measuring all possible outcomes, this technique focuses only on one specific outcome, allowing scientists to study individual nuclear processes with high precision.
sCVD Diamond Detector
This is the specialized detector used in the experiment. Chemical Vapor Deposition (CVD) creates a single crystal of diamond, which is highly sensitive to neutron interactions. It allows researchers to precisely measure the energy and type of particles resulting from a neutron hitting the target.
Nuclear Data Evaluation
This is the process of creating comprehensive databases that describe how nuclei react with neutrons. The new measurements help update these databases, making them more accurate for predicting nuclear reactions in various applications, such as reactor physics or materials science.

Terminology

Summary

Exclusive cross section measurements of 12C(n,p n) and 12C(n,d n) reactions provide new data for nuclear data evaluations by extending measurements to higher incident neutron energies and measuring previously unmeasured channels on Page 1>. p. 0

Where the paper says it

edu These measurements provide new data for nuclear data evaluations. In particular, the ENDF/B- evaluation for the 12C(n,p)12B cross section can be updated with more recent measurements, at higher energies.

Experimental Setup and Data Acquisition

The experiment utilized a single-crystal chemical vapor deposited (sCVD) diamond detector at LANSCE to measure neutron-induced reactions on carbon Protons were accelerated to 800 MeV and impinged on a tungsten spallation target at the Los Alamos Neutron Science Center (LANSCE) This produced fast neutrons with a broad energy distribution from 0 to above 600 MeV, with 1.8 µs separating each group of neutrons due to the pulse structure of the proton beam The data can be visualized by plotting the reconstructed reaction Q value, which is calculated by subtracting the incident neutron energy from the energy deposited in the detector

Cross Section Measurements and Comparisons

The work extends cross section measurements of four additional reaction channels: 12C(n,p2) 12B, 12C(n,p3+4) 12B, 12C(n,d1) 11B, and 12C(n,d2) 11B Notably, this is the first cross section measurement for 12C(n,d2) 11B Combined with the data of Ref. [4], the sum of these partial cross sections reproduces the 12C(n,p)12B and 12C(n,d)11B total cross sections up to 17. p. 0

Where the paper says it

Combined with the data of Ref. [4], the sum of these partial cross sections reproduces the 12C(n,p)12B and 12C(n,d)11B total cross sections up to 17.

3 MeV and 21. p. 0
Where the paper says it

Neutrons with a broad energy spectrum were produced via spallation. Relative cross sections are reported from above threshold up to 26 MeV incident neutron energy for 12C(n,p2) 12B, up to 23 MeV for 12C(n,p3+4) 12B, and up to 35 MeV for 12C(n,d1) 11B and 12C(n,d2) 11B, all of which represent the highest-energy measurements for these reactions to date, and the first measurement for (n,d2).

6 MeV, respectively The measurements are compared with recent data from EXFOR as well as TALYS calculations

Uncertainty Analysis and Normalization

The total uncertainties for the cross section measurements include both statistical and systematic contributions, but are generally dominated by statistical uncertainties, typically between 10-30% Several systematic uncertainties also affect the total uncertainty The normalization uncertainty is fully correlated The efficiency correction uncertainty is fully correlated In this work, the sources of uncertainty with lesser contributions to the total uncertainty are fully correlated, while the sources of uncertainty with greater contribution to the total uncertainty are uncorrelated

Conclusion and Impact

The measurements presented in this work supply tighter constraints for reaction models and future nuclear data evaluations The summed 12C(n,p)12B and 12C(n,d)11B cross sections clearly illustrate the current deficiencies in nuclear data evaluation libraries These measurements will be beneficial as inputs for empirical simulation packages, such as Mcnp, Menate r, neuSIM4, and some Geant4 physics lists The measurements presented in this work supply tighter constraints for reaction models and future nuclear data evaluations.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved cross section data for 12C(n,p2) allow ENDF/B-evaluation to be updated with more recent measurements at higher energies. This enables more accurate nuclear data evaluations for exclusive channels.

  2. The new measurements provide tighter constraints for reaction models by comparing experimental results with TALYS calculations, helping to identify deficiencies in the modeling of direct and/or compound components.

  3. The data serve as critical inputs for empirical simulation packages like Mcnp, Menate r, neuSIM4, and Geant4 physics lists, enhancing the planning and analysis of experiments using these materials.

  4. The measurements constrain nuclear reaction models by providing data that are especially useful if evaluations are performed for exclusive channels. This directly addresses the scarcity of partial cross section data above 20 MeV.

  5. The improved system allows for more reliable simulation inputs, as it addresses the need for accurate cross section data for simulation inputs in packages used to simulate neutron interactions with detectors like diamond and organic scintillators.

Abstract

A single-crystal chemical vapor deposited (sCVD) diamond detector was used at LANSCE to measure neutron-induced reactions on carbon. Neutrons with a broad energy spectrum were produced via spallation. Relative cross sections are reported from above threshold up to 26 MeV incident neutron energy for 12 C(n,p 2) 12 B, up to 23 MeV for 12 C(n,p 3+4) 12 B, and up to 35 MeV for 12 C(n,d 1) 11 B and 12 C(n,d 2) 11 B, all of which represent the highest-energy measurements for these reactions to date, and the first measurement for (n,d 2). Cross sections for 12 C(n,p) 12 B total and 12 C(n,d) 11 B total are also reported from sums of the partial cross sections. These measurements are compared with recent data from EXFOR as well as TALYS calculations. These data are useful for future nuclear data evaluations and can be used as cross section inputs for data-based simulation packages.

Sources

Related papers