Quasi-Static Fault-Tolerant Feedback Control of a Quadrotor Carrying a Slung Payload under Rotor Failure

arXiv:2611.15787 · eess.SY, cs.SY · Submitted 2026-11-11 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.

Rosa: We're looking at the paper: "Quasi-Static Fault-Tolerant Feedback Control of a Quadrotor Carrying a Slung Payload under Rotor Failure".

Dev: Here's the gist of the paper. This paper presents a nonlinear control law for a slung payload system (SPS) consisting of a quadrotor unmanned aerial vehicle (UAV) carrying a slung payload under complete single-rotor failure.

Rosa: The controller achieves local exponential convergence of the payload position to a geometric path in space, rather than tracking a timed reference trajectory.

Dev: System Modeling and State Space Representation The SPS dynamics are described by a set of coupled differential equations involving the UAV's motion and the pendulum's attitude.

Rosa: The full state is 16-dimensional, comprising position, attitude, velocity, angular velocity, and body rates.

Paper summary: Rosa: So we're looking at this paper called "Quasi-Static Fault-Tolerant Feedback Control of a Quadrotor Carrying a Slung Payload under Rotor Failure". Basically, they're tackling what happens when one rotor on the quadrotor fails completely while it's carrying something slung underneath.

Dev: Right, the main thing they propose is this nonlinear control law for that situation, focusing specifically on handling that complete single-rotor failure. Their goal isn't just to keep things running; they want the payload position to settle onto a geometric path in space, instead of chasing some timed reference trajectory.

Taro: What does that mean practically? Does it mean if you lose one motor, the system doesn't just crash or fly off into the ground randomly?

Rosa: Exactly. The authors claim they achieve local exponential convergence of the payload position onto a geometric path in space, rather than tracking some timed reference trajectory. That means it finds a stable spot on that path where it stays.

Dev: And they tie that stability to something bigger, too: the transverse dynamics are exponentially stable, and the path-following manifold is rendered controlled invariant by feedback. That's a big claim because usually when things fail, you get unpredictable motion.

Taro: Controlled invariance sounds like something where you can prescribe motion along that path independently using some command while still staying on it. How does that work in a real failure scenario?

Rosa: They achieve this by splitting the output coordinates into transverse and tangential parts, which is a key part of their design. The system is set up so the origin of those transverse dynamics gets stabilized while the tangential dynamics can be assigned freely through a user-specified command.

Dev: The core mechanism they use involves transforming the inputs to define this second input, nu two, which acts like a simple double integrator related to the second output derivative, h double sub two. This lets them stabilize those h two dynamics using what's called a Brunovsky pair twenty-four <ref:2611.15787#pg1>.

Taro: Okay, so they have one set of controls for stability and another way to move along the path? What about the UAV itself when things go wrong? That seems like a major concern.

Paper summary: Rosa: They also address the UAV body angular velocity staying bounded under bounded applied torque, even in the case of complete single-rotor failure. This suggests that even with a major mechanical failure, they keep those rotational speeds in check.

Dev: That stability is guaranteed because they show that the closed-loop system stabilizes the origin of those dynamics, which decays exponentially no matter what kind of disturbance or state you have. They also use a tangential input, nu three, to independently assign motion along that prescribed geometric path C.

Taro: So if I'm only listening to this, what does it mean for me who's just driving or walking and not running these complex simulations? What's the actual real-world implication?

Rosa: For you, it means that if you ever deal with a drone or a system like this having one motor go completely silent, the control law they designed ensures the slung payload doesn't just fly off uncontrolled. It finds a safe geometric path to follow.

Dev: The paper "Quasi-Static Fault-Tolerant Feedback Control of a Quadrotor Carrying a Slung Payload under Rotor Failure" is really about designing direct fault-tolerant control that bypasses the need for complex fault estimation steps, instead designing the controller directly for the faulty dynamics itself.

Taro: That's interesting because usually, in real failures, you have to guess what happened and then compensate. This paper seems to skip that entire estimation step by being designed around the known faulty dynamics.

Rosa: Right, so they develop a closedform fault-tolerant quasi-static feedback control law with inputs one and two that decouple the transverse and tangential dynamics. They also establish exponential stability for the transverse part, which is a big win here.

Dev: And they show that the tangential input three can independently assign motion along that prescribed geometric path, which means you can command movement along C without disturbing the stability of staying on C. That's what controlled invariance really means in practice.

Paper summary: Taro: So if we look at the numbers, the results show convergence to a circle of radius d star at height r star when they run their simulations on this coordinate-free SPS model. How does that compare to just saying "it works"?

Rosa: They confirm it by showing that controlled invariance is maintained by initializing the system on the path-following manifold where both h one and h two are zero for all time. That's a concrete way to prove they stay put along the path.

Dev: And they also showed that if you keep the applied torque bounded, Theorem three guarantees that the UAV body angular velocity stays bounded despite that complete single-rotor failure. That’s a stability guarantee tied to physical limits on how much power you can actually pump into it.

Taro: So what's the limitation here? What does this paper not cover? Where might this method fail when the real world gets messy outside of the simulation environment they used?

Rosa: One thing they mention is that while they handle complete single-rotor failure, their design bypasses any fault estimation step by treating it as a known faulty dynamics, which means if you had a more complex set of partial faults instead of one total failure, this specific control law wouldn't apply directly.

Dev: That makes sense. The paper focuses on the specific case of complete single-rotor failure rather than broader uncertainty in the actuators, which is a limitation they highlight when contrasting it with studies on partial actuator faults sixteen <ref:2611.15787#pg1>.

Taro: It seems like this paper is very focused on proving that you can achieve path following and stability under one specific, severe failure mode. What does that imply for developing more robust systems in general?

Rosa: It implies that you don't always need a huge estimator to handle actuator failures; sometimes, a direct controller designed for the known faulty dynamics is enough to keep the system behaving predictably along a desired path.

Dev: The paper "Quasi-Static Fault-Tolerant Feedback Control of a Quadrotor Carrying a Slung Payload under Rotor Failure" is ultimately about demonstrating that you can get both stability on the path and independent control over motion along that path simultaneously, even when the hardware fails in this specific way.

Conclusion: Rosa: So we've been looking at this paper called "Quasi-Static Fault-Tolerant Feedback Control of a Quadrotor Carrying a Slung Payload under Rotor Failure," and what it really boils down to is designing a control law that works even when one of the rotors on a drone completely fails.

Dev: Yeah, it’s about handling that specific failure mode—the complete single-rotor failure—without needing some complex online estimation of what went wrong. They propose this feedback control approach.

Taro: What's the big deal here? Is it just keeping the drone from falling over, or is there something deeper they're showing us?

Rosa: It’s about getting the payload onto a specific geometric path in space, not just following some timed route. They achieve exponential convergence of that position to that path.

Dev: And the way they do it is by splitting the control inputs into transverse and tangential parts, which lets them stabilize the stability of staying on that path while letting you command where you want to go along it.

Taro: So if I'm just watching this happen in real-time, what does that mean for my experience with these systems? Does it make them safer?

Rosa: It means if one motor fails suddenly, the system doesn't just spin out of control randomly; it finds a stable spot on the desired path. They showed the transverse dynamics are exponentially stable, which is a big deal for safety.

Dev: And they proved that even with bounded applied torque—meaning you can only push it so hard—the UAV’s body angular velocity stays bounded, even with that failure present. That gives us a stability guarantee tied to physical limits on the power input.

Taro: So it's not just about the drone staying upright, but also about controlling its orientation when things go wrong?

Rosa: Exactly. They showed that if you keep the system initialized on that path-following manifold—where all those transverse constraints are zero—it stays there for all time. It proves controlled invariance.

Dev: It's a direct controller designed around the known faulty dynamics, which is different from having an AI try to guess what failed and then compensate. They showed how you can assign tangential motion independently while maintaining that path stability.

Taro: What’s the catch? What are they saying this method *doesn't* do? Where does it stop working in a messy real-world situation?

Rosa: Well, they focus specifically on complete single-rotor failure. If you had more complicated partial failures, this specific control law wouldn't apply directly. It’s tailored to that one scenario.

Dev: That’s the limitation—it’s specialized for this one type of fault rather than a general uncertainty model for any kind of actuator issue. But for the complete failure case, it’s quite solid.

Taro: So, the implication is that you don't always need a massive estimator to handle actuator failures; sometimes a direct controller built for the known faulty dynamics is enough to keep things predictable along a desired path.

Rosa: That seems to be their main message—a simpler way to achieve stability and controlled motion under this specific stress. We’ll look at some of the specifics on how they set up those input transformations next.

Sultan Qaboos University · New Jersey Institute of Technology

eess.SY, cs.SY

Submitted: 2026-11-11

Updated: 2026-11-11

Comments: 8 pages, 8 figures

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 83/100

The gist: This paper presents a nonlinear control law for a slung payload system (SPS) consisting of a quadrotor unmanned aerial vehicle (UAV) carrying a slung payload under complete single-rotor failure.

Key concepts

Quasi-Static Feedback Control (QSF)
This control method splits the system's movement into two parts: transverse (position error) and tangential (motion along the desired path). It stabilizes the position errors exponentially while allowing the motion along the path to be freely determined by a user command.
Geometric Path C
The desired trajectory for the payload is defined as a specific geometric curve in 3D space. This curve is mathematically defined as where two independent surfaces intersect, providing precise constraints on where the payload must move.
Controlled Invariance
This means that once the system reaches and stays on the desired path C, its motion along that path is stable and not disturbed by external factors. The control law ensures that if the system starts on this path, it will continue to move along it without deviation.
Transverse Dynamics Stabilization
The controller focuses on stabilizing the 'transverse' dynamics, which represent the errors in position relative to the desired path. This stabilization is achieved exponentially, meaning these errors decay rapidly towards zero regardless of initial conditions.

Terminology

Summary

This paper presents a nonlinear control law for a slung payload system (SPS) consisting of a quadrotor unmanned aerial vehicle (UAV) carrying a slung payload under complete single-rotor failure. p. 0 The controller achieves local exponential convergence of the payload position to a geometric path in space, rather than tracking a timed reference trajectory. p. 0

System Modeling and State Space Representation

The SPS dynamics are described by a set of coupled differential equations involving the UAV's motion and the pendulum's attitude. The full state is 16-dimensional, comprising position, attitude, velocity, angular velocity, and body rates. p. 1 The system is underactuated with four degrees of underactuation due to the UAV's four inputs. A coordinate-free description of the SPS dynamics is provided by equations (1a) through (1f). p. 1 The state vector is parameterized using Euler angles and spherical coordinates, resulting in a chart-based realization of the 16-dimensional state space. p. 2

Control Objectives and Path Definition

The primary goal is to steer the payload position onto a geometric path C while maintaining motion invariance along C. The curve C is defined as the intersection of two independent surfaces, where the transverse constraints are given by h1(p) = h2(p) = 0. p. 2 A third output h3(p) is introduced as a smooth local path-coordinate function to prescribe motion along C. p. 2 The problem requires the controller to achieve four goals: G1, convergence to C exponentially; G2, payload's motion along C is controlled-invariant; G3, payload follows a prescribed tangential motion along C; and G4, the UAV body angular velocity stays bounded under bounded applied torque.

Quasi-Static Feedback Control Design

The control approach splits the output coordinates into transverse and tangential parts. The design involves transforming the dynamics into a form where the origin of the transverse dynamics is stabilized while tangential dynamics remain freely assignable through a user-specified command. p. 3 A key step involves defining a transformed input ν2, which is related to the second output derivative h¨2 as a simple double integrator. p. 3 This allows for the stabilization of the h2-dynamics using a Brunovsky pair [24]. p. 3 The remaining inputs, τ2 and τ3, are then computed from transformed inputs ν1 and ν3 using an input transformation derived from the decoupling matrix A˜. p. 4

Stability Analysis and Guarantees

Theorem 3 establishes that the transverse dynamics are exponentially stable and the path-following manifold X∗ is controlled invariant. Furthermore, if the applied torque is bounded, Theorem 3 guarantees that the UAV body angular velocity remains bounded despite complete single-rotor failure. p. 1 The stability of the transverse dynamics is guaranteed because the closed-loop system stabilizes the origin of the z⋔-dynamics, which decays exponentially regardless of z⋔∥ and ξ. p. 4 The tangential state z∥ is assigned by ν3 to achieve desired motion along C. p. 5

Simulation Results and Validation

Numerical simulations validate the proposed QSF law in a coordinate-free SPS model. The results show that the payload position converges to a desired path, such as a circle of radius d∗ at height r∗. p. 5 The controlled-invariance is confirmed by initializing the SPS on the path-following manifold, where h1 = h2 = 0 for all time. p. 6 The UAV heading rate converges to approximately 0. p. 699 rad/s under bounded applied torque. p. 0 The paper concludes that the proposed controller exponentially stabilizes the transverse dynamics, renders the path-following manifold controlled invariant, and allows independent assignment of tangential motion. p. 7

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Quasi-Static Feedback Control Law Implementation: The system can implement a closed-form fault-tolerant QSF control law to decouple transverse and tangential dynamics, ensuring that the origin of transverse dynamics is stabilized while the tangential dynamics remain freely assignable through a user-specified tangential command.

  2. Path Invariance Guarantee: The improved system can guarantee that when the complete initial state belongs to the path-following manifold, the payload remains on the path, even under complete single-rotor failure, as demonstrated by Theorem 3 guarantees local exponential convergence to the desired path (G1) and forward invariance of the path-following manifold X∗ is controlled invariant (G2).

  3. Tangential Motion Control: The system can prescribe independent motion along a geometric path by using a tangential command, allowing for the payload’s motion along C to be controlled-invariant and enabling specific behaviors like point stabilization or path-speed tracking (G3).

  4. UAV Stability Under Failure: The control design ensures the stability of the UAV rotational dynamics, guaranteeing that the UAV body angular velocity remains bounded under bounded applied torque despite complete single-rotor failure (G4).

Related papers