On the Excitation of Sloshing Oscillations in Hot Coronal Loops
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Astrophysics Radio. Generated commentary on the latest astrophysics papers.
Vera: I'm Vera.
Jocelyn: And I'm Jocelyn, here with Subrahmanyan.
Vera: We're looking at the paper: "On the Excitation of Sloshing Oscillations in Hot Coronal Loops".
Jocelyn: Here's the gist of the paper. Observations of hot coronal loops have often shown the presence of compressive plasma oscillations.
Vera: This study presents new observational results that demonstrate a direct link between the initiation of sloshing oscillations in coronal loops and the timescale of flare-associated plasma injection.
Jocelyn: Observational Methodology The research utilized datasets from the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO) to study small-scale flare events in active region NOAA 11476 spanning May 07, 2012.
Vera: The AIA instrument observes the Sun in seven extreme ultraviolet (EUV) channels sensitive to plasma across different temperatures, with representative wavelengths listed for each channel.
Title and authors: Vera: So we're looking at this paper, "On the Excitation of Sloshing Oscillations in Hot Coronal Loops." It’s about finding a direct link between when sloshing oscillations start and how fast plasma gets injected during a flare.
Jocelyn: Right. Basically, they used data from the Atmospheric Imaging Assembly on the Solar Dynamics Observatory to look at small-scale flare events in active region NOAA eleven thousand four hundred seventy-six back in May two thousand twelve. The point is that these oscillations are usually preceded by some localized brightening near the footpoint of a coronal loop.
Subrahmanyan: I wonder if this connection they're looking for is something we can really see with current instrumentation, or if it’s something purely inferred from the timing of the events.
Vera: Well, they found that sloshing oscillations are triggered in three out of five flare events they studied. The critical factor determining this excitation seems to be how long the impulsive perturbation lasts compared to the time it takes for sound to cross a loop.
Jocelyn: And they specifically pointed out that if that initial injection duration is shorter than the loop's sound crossing time, that’s when you’re most likely to see these sloshing oscillations. Conversely, if the injection duration is comparable to the travel time between footpoints, no oscillations are observed at all.
Subrahmanyan: That suggests there's a specific timescale here—a constraint on the energy deposition rate that governs whether we see waves or just bulk flows moving plasma around.
Vera: Exactly. They also quantified this injection duration by placing some pixel boxes along the time axis and fitting a Gaussian to the intensity profiles near the footpoint. For event V, where oscillations lasted for three periods, they estimated this injection duration was one point five minutes.
Jocelyn: That one point five minute figure is key because it’s relatively short compared to event I, which showed only one reflection and had an estimated injection duration of five point eight minutes. It seems the plasma injection timescale is short when sloshing oscillations are excited, as opposed to when they aren't seen at all.
Subrahmanyan: If we can reliably measure that duration, it gives us a direct probe into how flare energy gets partitioned between the compressive waves and the bulk mass transport of plasma.
Vera: The paper also looked closely at the characteristics of these oscillations themselves. They fitted the light curve using a specific functional form, and they found that event V had a noticeably longer period compared to events III and IV, which showed only marginal differences in their oscillation periods.
Title and authors: Jocelyn: And when looking at damping times, there was quite a spread. Event III had the fastest damping time of four hundred seventy plus minus thirteen seconds, while event IV had the slowest with a damping time of eight hundred thirty plus minus fifty seconds.
Subrahmanyan: That variation in damping times tells us something about how nonideal effects operate within those loops; it suggests that the dissipation mechanisms aren't uniform across all these flare scenarios.
Vera: The authors interpret this behavior as evidence that both the bulk flows and the oscillatory perturbations are actually driven by the same thing: an impulsive energy release near the footpoint. This supports a numerical prediction that sloshing oscillations only happen when the heat pulse duration is shorter than the loop’s sound crossing time, which is what they found in their observations.
Jocelyn: So, it sounds like flare energy isn't just one thing; it’s being channeled into both waves and flows depending on how quickly that energy is deposited near the footpoint.
Subrahmanyan: If this scenario holds up, it suggests that the way we model solar flare dynamics needs to account for this partitioning between compressive waves and bulk mass transport governed by the rate or duration of energy deposition at that boundary.
Vera: The study confirms that fully developed sloshing oscillations are only seen in three of the five cases they looked at, which gives us a statistical constraint on when we should expect to see them. The results strongly back up previous numerical findings regarding the excitation condition, specifically that the heat pulse duration must be less than the loop’s sound crossing time.
Jocelyn: They also noted that while these oscillations and standing slow waves are common in coronal structures, interpreting them as just slow magnetoacoustic waves isn't totally unique. Spectroscopic observations have actually shown periodic blueward asymmetries in emission line profiles, suggesting high-speed upflows instead.
Subrahmanyan: That’s an important nuance because it means we have to be careful about attributing every periodic disturbance we see purely to one mechanism, like just waves versus flows.
Vera: And the paper mentions that they can identify these simultaneous wave and flow events by cross-referencing time and distance maps. This suggests that the close association between continuous plasma flows and propagating disturbances points toward a single initiation mechanism driving both phenomena at once.
Title and authors: Jocelyn: So, it’s not just one thing causing the disturbance; it’s an interaction between the flow and the wave generation that we need to track together when analyzing these loops.
Subrahmanyan: If we can confirm this concurrent generation, it strengthens the idea that impulsive energy release is what sets off both components in a loop, which is vital for understanding how flare energy propagates through the solar atmosphere.
Vera: Overall, this paper provides strong observational support for the condition that dictates when sloshing oscillations are excited. It gives us concrete timescales related to plasma injection duration and oscillation properties we can use to test against simulations.
Jocelyn: And they also provided a physical constraint on the loop structure itself by estimating deprojected loop lengths, finding values around one hundred sixty-six to one hundred sixty-eight megameters for all five cases.
Subrahmanyan: That's a useful geometric anchor; knowing the approximate size of the loop helps constrain how we interpret the measured oscillation periods and speeds.
Vera: So, to wrap up on "On the Excitation of Sloshing Oscillations in Hot Coronal Loops," it confirms that sloshing oscillations are triggered by a short impulsive perturbation relative to the loop’s sound crossing time, and it gives us quantitative estimates for injection duration.
Jocelyn: It also showed how different events behave differently regarding oscillation periods and damping times, suggesting variability in the nonideal effects within the loops.
Subrahmanyan: This work ties observational data on AIA channels directly to theoretical predictions about energy partitioning between waves and flows, which is a necessary step for understanding flare physics in these structures.
Vera: It’s a solid piece of evidence connecting the timing of plasma injection to the onset of these specific wave phenomena in hot coronal loops.
Jocelyn: And for future work, they stress that we need more statistical studies involving more sloshing oscillation events to really nail down the exact relationship between plasma injection duration and those oscillation properties.
Subrahmanyan: I agree, getting a larger sample size is needed to move from these few observed instances to a robust physical law governing this excitation condition.
Vera: That's the path forward then, using more data to test the limits of this understanding of how flare energy gets channeled into these distinct dynamical components.
Jocelyn: So that’s where we leave it for now on this paper, "On the Excitation of Sloshing Oscillations in Hot Coronal Loops." We'll be looking at other papers shortly.
Subrahmanyan: Indeed, understanding how those energy pulses behave dynamically is crucial for modeling the entire process of energy release in solar flares.
The paper's summary: Vera: So, to recap, this paper is looking at hot coronal loops and how those sloshing oscillations actually start, finding that they only happen under very specific conditions related to how fast plasma gets injected into the loop.
Jocelyn: Right. They found a clear trigger mechanism where the impulsive energy release has to be shorter than the time it takes for sound waves to travel across that loop. That's what sets off those oscillations, and if the injection lasts longer than that travel time, you just see bulk flows instead.
Subrahmanyan: From a theoretical side, this is really interesting because it suggests a clear way energy is being partitioned inside the loop structure—it’s going into both compressive waves and bulk mass transport depending on that timing constraint.
Vera: Exactly. They quantified the injection duration by fitting Gaussian shapes to the intensity profiles near the footpoint, and they showed that when those oscillations do happen, that injection time is relatively short compared to when we don't see any waves at all.
Jocelyn: And they looked at how these oscillations behave themselves too. They found a few different events with varying periods and damping times; event three had the fastest damping time, while event four was the slowest.
Subrahmanyan: That variation in damping times is important because it tells us about the nonideal effects happening inside those loops; it’s not uniform across all these flare scenarios.
Vera: So what this means for us on the ground is that we can use these timing constraints to predict when we should expect to see specific wave patterns, and we can get a sense of how quickly energy moves through that plasma.
Jocelyn: It gives us a way to test simulations; if a model doesn't have that short pulse duration constraint, it shouldn't be predicting those sloshing oscillations.
Subrahmanyan: If this relationship holds up across more events, we can start to build a better picture of how flare energy is channeled into these different dynamical components in the solar atmosphere.
Vera: And for future work, they stress that we need a bigger statistical sample of these events to really nail down the exact relationship between that plasma injection duration and what you’re seeing in the oscillation properties.
Jocelyn: That makes sense; it moves us from just observing a few isolated cases to understanding the general rule governing this excitation condition.
Subrahmanyan: We need those larger studies to confirm if this impulsive energy release driver is the universal mechanism for generating both waves and flows in these loops across all solar events.
The paper's improvements: Tom: So, we're looking at how these researchers think they can make this paper better, which is what they call "improvements."
Vera: Well, one thing they suggest is using that AI to automatically detect when sloshing oscillations are triggered just by analyzing the flare characteristics.
Jocelyn: Right. Instead of manually checking the time scales against the sound crossing time, the system could analyze whether that impulsive perturbation is short enough or long enough to induce those waves.
Subrahmanyan: That's a practical way to handle the data volume; automating that decision based on physical parameters is definitely useful for scaling up these kinds of surveys.
Vera: And another big one they bring up is identifying the simultaneous generation of both the waves and the flows by cross-referencing time and distance maps.
Jocelyn: It’s about recognizing that those continuous plasma flows and those propagating disturbances aren't separate things; they are likely driven by the same initial event.
Subrahmanyan: If they can prove that mechanism, it solidifies the idea of a single, impulsive energy release driving both components in the loop structure.
Vera: Then there’s the quantitative assessment of that plasma injection duration using a Gaussian fit to intensity profiles. They show this method gives you a concrete estimate for how long that injection lasted.
Jocelyn: And they suggest using those damping times, like event three being fast and event four being slow, as metrics to assess how well those nonideal effects are operating within the loop.
Subrahmanyan: That’s useful because it gives us a way to quantify the efficiency of energy dissipation in these different loops.
Vera: They also mentioned applying geometric constraints by assuming a circular geometry to estimate deprojected loop lengths, finding values around one hundred sixty-six to one hundred sixty-eight megameters for all five cases.
Jocelyn: That’s a useful physical anchor; knowing the approximate size of the loop helps constrain how we interpret the measured oscillation periods and speeds.
Subrahmanyan: If those deprojected lengths are consistent across different events, it strengthens our understanding of the general geometry of these hot coronal loops.
Vera: So, these improvements focus on making their detection more automated, linking flow and wave generation together, quantifying injection times and damping behavior, and applying geometric constraints to the loop size.
Jocelyn: It’s about taking the observational findings from those five events and turning them into a more robust tool for future solar studies.
Subrahmanyan: This work is important because it sets up a clear testable hypothesis: that impulsive energy release dictates the partition between waves and flows in coronal loops, and these improvements are how we’ll test that hypothesis better.
Conclusion: Tom: So we're wrapping up our talk on "On the Excitation of Sloshing Oscillations in Hot Coronal Loops." We've looked at how this paper connects plasma injection timing to those sloshing oscillations.
Vera: Exactly. The main point is that these oscillations are triggered only when the impulsive energy release is shorter than the loop’s sound crossing time, and they gave us some concrete numbers on how long that injection actually lasts in different events.
Jocelyn: It confirms that we can use those specific timescales to predict whether we should expect to see waves or just bulk flows.
Subrahmanyan: If this condition holds up across more observations, it gives us a clear way to model the energy partitioning between waves and flows in coronal loops, which is key for understanding flare physics.
Vera: They also provided physical constraints on the loop structure by estimating deprojected loop lengths around one hundred sixty-six to one hundred sixty-eight megameters across all their cases.
Jocelyn: That’s a useful geometric anchor; knowing the size of the loop helps us interpret those oscillation periods and speeds we're measuring.
Subrahmanyan: If those deprojected lengths are consistent, it supports our understanding of the general structure of these hot coronal loops in the solar atmosphere.
Vera: The paper does acknowledge that they need more statistical studies involving a larger number of sloshing oscillation events to really nail down the precise relationship between injection duration and those oscillation properties.
Jocelyn: That’s the next step; moving from a few cases to a general physical law requires more data points.
Subrahmanyan: We need those larger studies to confirm if this impulsive energy release driver is the universal mechanism for generating both waves and flows in these loops across all solar events.
Vera: It’s been really interesting seeing how observational constraints on flare timing can be tied so directly to theoretical predictions about wave excitation.
Jocelyn: And for our next paper, I think we should look at how the damping times vary; that variation tells us a lot about the nonideal physics happening inside those loops.
Subrahmanyan: Definitely, because understanding those dissipation mechanisms is what lets us connect these observations to the broader picture of energy transport in astrophysical systems.
Southwest Research Institute · Aryabhatta Research Institute of Observational Sciences
astro-ph.SR
Submitted: 2026-11-10
Updated: 2026-11-10
Comments: 15 Pages, 9 figures, accepted for publication in APJ
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 74/100
The gist: Observations of hot coronal loops have often shown the presence of compressive plasma oscillations.
Key concepts
- Sloshing Oscillations
- These are specific types of compressive plasma oscillations observed within hot coronal loops. The study found that their presence is highly dependent on how quickly the initial energy release occurs relative to the loop's natural wave speed, suggesting a specific triggering condition.
- Impulsive Perturbation Duration
- This refers to how long the sudden burst of energy injection lasts near the loop's footpoint. The research determined that if this injection duration is shorter than the time it takes for a sound wave to travel across the loop, sloshing oscillations are more likely to be excited.
- Plasma Injection Duration
- This measures the actual time it takes for plasma to be injected into the loop structure, estimated by fitting intensity profiles. The findings indicate that when sloshing oscillations occur, this injection timescale is relatively short compared to events where no significant oscillations are detected.
Terminology
Summary
Observations of hot coronal loops have often shown the presence of compressive plasma oscillations. p. 0 Draft version November 13, 2026
Typeset using LATEX twocolumn style in AASTeX631
On the Excitation of Sloshing Oscillations in Hot Coronal Loops
Arpit Kumar Shrivastav 1 and S. Krishna Prasad 2
1Southwest Research Institute, 1301 Walnut St, Suite 400, Boulder, CO 80302, USA
2Aryabhatta Research Institute of Observational Sciences (ARIES), Manora Peak, Nainital-263001, Uttarakhand, India
ABSTRACT
Observations of hot coronal loops have often shown the presence of compressive plasma oscillations. Despite these
insights, the occurrence of waves and flows in coronal
loops and their connection to the underlying initiation
mechanisms remain an open question in solar physics
(Banerjee et al. In this letter, we present new observational results
that demonstrate a direct link between the initiation of
sloshing oscillations in coronal loops and the timescale
of flare-associated plasma injection, while also emphasizing the simultaneous generation of waves and flows
driven by the same triggering events and their dependence on the characteristics of the energy release.Where the paper says it
Where the paper says it
Observational Methodology
The research utilized datasets from the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO) to study small-scale flare events in active region NOAA 11476 spanning May 07, 2012. The AIA instrument observes the Sun in seven extreme ultraviolet (EUV) channels sensitive to plasma across different temperatures, with representative wavelengths listed for each channel. p. 1 AIA observes the Sun in seven extreme
ultraviolet (EUV) channels, each sensitive to plasma at
specific temperatures ranging from the chromosphere to
the corona. The representative wavelengths of these
channels are: 304 ˚A (He II; ∼0. , 94 ˚A, 131 ˚A, 193 ˚A) gives rise to distinct peaks
in the temperature response function, and hence sensitivity to plasma at different temperatures within the
same passband. All the data were corrected for instrumental effects such as roll angle, plate scale, and spatial
alignment between different wavelength channels using
publicly available routines1
. 5, yielding a
final plate scale of 0. 6 arcsec per pixel and a temporal
cadence of 12 s. 6 arcsec per pixel and a temporal
cadence of 12 s. The relevant AIA data at different time intervals, capturing five different episodes of small-scale flare related
brightenings near the footpoint of the same coronal loop,
are analyzed.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Sloshing Oscillation Excitation Criteria
The study found that sloshing oscillations are triggered in three out of five flare events, while in the other two events, only plasma flows are observed. The critical factor determining the generation of sloshing oscillations appears to be the duration of the impulsive perturbation relative to the loop sound crossing time. p. 0 2013; Wang et al. As the numerical simulations suggest, the critical factor
that determines the generation of sloshing oscillations
appears to be the duration of the impulsive perturbation
relative to the loop sound crossing time (Reale 2016). As the numerical simulations suggest, the critical factor
that determines the generation of sloshing oscillations
appears to be the duration of the impulsive perturbation
relative to the loop sound crossing time (Reale 2016). Specifically, shorter impulsive perturbation relative to
arXiv:2611. Specifically, shorter impulsive perturbation relative to
arXiv:2611. 14676v1 [astro-ph. 2
this characteristic time scale are more likely to induce
sloshing oscillations. Despite this dependency seen in
simulations, direct observational validation of the same
is still lacking. However, because all the events occur within
the same loop structure, assuming a similar travel time
for these two cases implies that sloshing oscillations are
likely to be excited when the plasma injection duration is
shorter than the travel time of the plasma perturbation
along the loop. In contrast, when the injection duration
is comparable to the travel time between footpoints, no
significant oscillations may be observed.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Plasma Injection Duration Analysis
The duration of plasma injection was estimated by placing 5 pixel-wide green boxes along the time axis at a fixed position in distance near the footpoint, and determining the full-widthat-half-maximum (FWHM) of a Gaussian fitted to the obtained intensity profiles. For event V, where sloshing oscillations persist for three periods, this duration was found to be 1. p. 5 Panels (a) and (b) display the results for events V and I, respectively. As
may be recalled, event V exhibits sloshing oscillations
that persist for three periods, whereas event I displays
barely one single reflection (see Figures 2 and 3). Panels (a) and (b) display the results for events V and I, respectively. As
may be recalled, event V exhibits sloshing oscillations
that persist for three periods, whereas event I displays
barely one single reflection (see Figures 2 and 3). 5 minutes, whereas for event I, it is 5. These values suggest that the plasma injection
time scale is relatively short in the case where sloshing
oscillations are excited, compared to the case where no
significant oscillations are observed.Where the paper says it
Where the paper says it
Where the paper says it
Oscillation Characteristics and Driving Mechanism
The light curve of the oscillation was fitted using a functional form proposed by Krishna Prasad & Van Doorsselaere (2021) and modified by Paliwal et al. (2026). Event V showed a noticeably longer period compared to events III and IV, which exhibited marginal differences in the oscillation period. p. 6 Events III and IV show a marginal difference in the
oscillation period, whereas event V shows a noticeably
longer period. The variation in periods may be attributed to differences in loop temperature. significant differences between all three events. Event
III exhibits the fastest damping, with a damping time
of 470±13 s, while Event IV shows the slowest, with
a damping time of 830±50 s.Where the paper says it
Where the paper says it
Physical Interpretation
The observed behavior suggests that both bulk flows and oscillatory perturbations originate from the same driving mechanism, specifically impulsive energy release. The findings support the numerical prediction that sloshing oscillations are triggered only when the heat pulse duration is shorter than the loop’s sound crossing time. p. 8 Our analysis reveals that this plasma injection duration
is an indicator of whether sloshing oscillations are excited; specifically, injections that are short relative to the
loop’s sound crossing time are significantly more likely to
produce coherent, long-lived oscillations. These observational results provide strong support for the numerical findings of Reale (2016), who demonstrated through
one-dimensional hydrodynamic simulations that sloshing oscillations are triggered only when the heat pulse
duration is shorter than the loop’s sound crossing time. Combining the behavior of flows and waves seen
in all events, one may conjecture that the energy deposited by the flare is partitioned between compressive
waves and bulk mass transport. This energy partitioning appears to be governed by the rate (or duration) of
energy deposition near the footpoint. As suggested by
Reale (2016), a short heat pulse can produce a pressure
dip that drives sloshing oscillations, whereas prolonged
heating allows the pressure to equilibrate along the loop,
preventing the formation of such a dip. Based purely on
the observed behavior, our scenario is also closer to a
flow-pulse driver exciting compressive waves, similar to
the MHD simulations reported by Wang et al.Where the paper says it
Where the paper says it
Where the paper says it
Conclusion and Future Work
The analysis confirms that fully developed sloshing oscillations are triggered in only three of the five observed cases. The results provide strong support for the numerical findings of Reale (2016) regarding the excitation condition. p. 8 Our analysis reveals that this plasma injection duration
is an indicator of whether sloshing oscillations are excited; specifically, injections that are short relative to the
loop’s sound crossing time are significantly more likely to
produce coherent, long-lived oscillations. These observational results provide strong support for the numerical findings of Reale (2016), who demonstrated through
one-dimensional hydrodynamic simulations that sloshing oscillations are triggered only when the heat pulse
duration is shorter than the loop’s sound crossing time. However, the current sample size is too small to draw robust conclusions about
their relationship, if such relation exist at all. Future
statistical studies involving a larger number of sloshing
oscillation events may be useful to determine this. These findings also align with MHD models that demonstrate the generation of waves and flows due to impulsive heating (Ofman et al. 2012), but highlight the need
for detailed investigation to quantify how flare energy
is channeled into these distinct dynamical components.Where the paper says it
Where the paper says it
Where the paper says it
Table 1 Summary
Table 1 summarizes the flare events and derived parameters, including Tinj, L, Ttr, P, Vph = 2L/P, and τ. The phase speed values for events III (505 km s−1), IV (542 km s−1), and V (454 km s−1) fall within the range reported in previous AIA studies. p. 8 The phase speed values
for events III, IV, and V are 505, 542, and 454 km s−1
,
respectively. Previous studies using AIA have reported
phase speeds of sloshing oscillations ranging from 397
to 853 km s−1
(Kumar et al. In addition to the oscillation parameters, we estimated
the deprojected length of our target loop structure under the assumption of a circular loop geometry, following
Aschwanden et al. This was performed independently for each event, yielding similar values around 166
to 168 Mm. Tinj is the duration of the apparent
plasma injection signature estimated from the FWHM of the fitted Gaussian profiles from x-t maps, L is the deprojected loop
length, Ttr is the travel time of the plasma perturbation between the two loop footpoints, P is the oscillation period, Vph = 2L/P
is the estimated phase speed, and τ is the exponential damping time. The symbol “–” indicates that the corresponding parameter
could not be measured because fully developed sloshing oscillations were not detected.Where the paper says it
Where the paper says it
Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Automated detection of sloshing oscillation excitation based on flare characteristics: The system can determine if sloshing oscillations are triggered by analyzing
the duration of the impulsive perturbation relative to the loop sound crossing time,
specifically distinguishing between cases whereshorter impulsive perturbation relative to arXiv:2611.14676v1 [astro-ph.SR] 10 Nov 2026 this characteristic time scale are more likely to induce sloshing oscillations
and cases whereno oscillations are observed when the injection duration is comparable to the travel time.
-
Simultaneous wave and flow identification: The improved system can identify
the simultaneous generation of waves and flows driven by the same triggering events
by cross-referencing time-distance maps, recognizing thatthe close association between continuous plasma flows and propagating disturbances suggests that both phenomena may be driven by the same initiation mechanism.
-
Quantitative assessment of injection duration: The AI can estimate the
duration of plasma injection into the loop
using a Gaussian fit to normalized intensity profiles, determining that for events where sloshing oscillations are excited, this value isrelatively short in the case where sloshing oscillations are excited, compared to the case where no significant oscillations are observed.
-
Damping time characterization: The system can analyze oscillation properties by fitting the light curve to Equation 1 to extract damping times, noting that
Event III exhibits the fastest damping
andEvent IV shows the slowest,
which can be used as a metric for assessing how effectively nonideal effects operate within the loop. -
Geometric constraint application: The system can estimate deprojected loop lengths using the assumption of a circular geometry, yielding values
around 166 to 168 Mm
for each event, providing a physical constraint on the structure being studied.
Abstract
Observations of hot coronal loops have often shown the presence of compressive plasma oscillations. These oscillations are usually preceded by a flare-associated localised brightening in the vicinity of one of the footpoints of the coronal loop. The flare heating produces an impulsive injection of plasma into the coronal loop, along with a plasma perturbation that bounces back and forth between the two footpoints, termed as sloshing oscillations. While the association of these oscillations with flares is apparent, the pertinent connection between their excitation and the flare characteristics remains poorly understood. In this study, using data from the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO), we present a unique set of observations, where the response of a single coronal loop due to repeated flares in the same active region is evident. Our analysis reveals that in three out of five flare events, sloshing oscillations are triggered, while in the other two events, only plasma flows are observed. By examining the duration of plasma injection associated with each flare, we find that sloshing oscillations occur when the injection duration is shorter than the travel time of the plasma perturbation across the loop. In contrast, no oscillations are observed when the injection duration is comparable to the travel time. These results reveal the dependence of sloshing oscillation excitation on the temporal characteristics of flares.
Sources
- Sloshing Oscillations in coronal loops excited by successive M- and C-Class flares
- Propagating Intensity Disturbances in Fan-like Coronal Loops: Flows or Waves?
Related papers
- He-star donor pathway for the hypervelocity star D6-2
- The ASPIICS solar coronagraph aboard the Proba-3 formation flying mission. Scientific objectives and instrument design
- Ongoing and Post-Mass-Transfer Binaries: A Living Catalog and Unified Review of Binary Mass Transfer Products
- HXI-DLA2: A Physics-Constrained Deep Learning Algorithm for the ASO-S Hard X-ray Imager
- Potential Solar Precursors to Magnetic Switchbacks
- Horizontal Magnetic Fields Dominate the Weak Field Quiet Sun in Sunrise III Observations. Evidence from Traditional and Transformer-Based Inversions