Non-perturbative renormalization of the energy-momentum tensor in the 2d O(3) non-linear sigma-model
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: High Energy Physics: Lattice. The day in lattice field theory: what the simulations put on the table.
Kai: We're looking at the paper: "Non-perturbative renormalization of the energy-momentum tensor in the 2d O(3) non-linear sigma-model".
Mira: Here's the gist of the paper. Non-perturbative renormalization of the energy-momentum tensor in the 2d O(3) non-linear sigma-model establishes a fully nonperturbative definition of its traceless components by determining their renormalization constants through lattice simulations and Ward identities, which is crucial for applying these methods to higher dimensional theories like Yang-Mills theory Theoretical Framework The paper constructs the traceless components of the energy-momentum tensor on a lattice for the two-dimensional O(3) non-linear sigma-model such that their correlation functions satisfy the appropriate Ward identities in the continuum limit The theory is defined by standard lattice discretizations of both the action and the energy-momentum tensor The discretization of space-time entails that the traceless two-index symmetric irreducible representation of O(2) splits into two irreducible representations of the dihedral group D4, each requiring an independent renormalization constant These constants are defined non-perturbatively by imposing discretized versions of continuum Ward identities for one-point functions in the presence of shifted boundary conditions The non-perturbative calculations are then carried out by Monte Carlo simulations, and the resulting renormalization constants are determined with a final accuracy better than a permille throughout the investigated range of the dimensionless bare coupling constant squared 0 ≤ g squared ≤ 0.6 Renormalization Strategy The strategy utilizes shifted boundary conditions to define the energy-momentum tensor nonperturbatively on the lattice The system is formulated in a finite volume of extent L0 in the compact direction and spatial size L1 Along the compact direction the field satisfies the shifted boundary condition σ(x0 + L0, x1) = σ(x0, x1 − L0ξ), where ξ is a dimensionless shift parameter An important consequence of shifted boundary conditions is the equation ⟨T01⟩ξ = −∂/∂ξ f(L0, ξ), which relates the expectation value of the offdiagonal component of the energy-momentum tensor to the response of the free-energy density under a infinitesimal variation of the shift parameter Moreover, an interesting Ward identity connects the two components of the traceless tensor (1 − ξ 2)⟨T01⟩ξ = ξ ⟨T00 − T11⟩ξ These identities are the direct analogue of those employed in the Yang-Mills theory and in QCD to renormalize non-perturbatively the energy-momentum tensor Numerical Study and Results Monte Carlo simulations were performed using the Wolff cluster algorithm for efficient sampling The renormalization constant ZT is determined from Eq.
Kai: (11) using the shift ξ = 1 The renormalization constant zT is obtained by imposing the Ward identity relating the off-diagonal and the traceless diagonal components The extrapolation of finite-L0 estimates to the 1/L0 → 0 limit at fixed bare coupling removes L0-dependent discretization effects The extrapolated values ZT(g 2 0) and zT(g 2 0) are listed in Tab.
Mira: I and shown in the bottom panel of Fig.
Kai: 7 Equation of State Validation The Equation of State is computed at a fixed temperature and compared with the exact prediction obtained from the Thermodynamic Bethe Ansatz and the Non-Linear Integral Equations The entropy density s(T)T = −E0(T)/T is then determined from s(T) = dp(T)/dT The agreement between the extrapolated value s0 and the exact continuum prediction s cont0 provides a stringent non-perturbative test of the determination of ZT, which differs from unity by 3–4% in the range of bare couplings considered In this work we have established a fully nonperturbative definition of the traceless components of the energy-momentum tensor in the two-dimensional O(3) non-linear sigma-model whose correlation functions satisfy the appropriate Ward identities in the continuum limit By adapting these techniques to the O(3) model, we have obtained, with a sub-permille precision, a nonperturbative determination of the renormalization constants of the traceless components of the energy-momentum tensor on the lattice as given in Eq.
Paper summary: Kai: So, wrapping up this discussion on "Non-perturbative renormalization of the energy-momentum tensor in the 2d O(three) non-linear sigma-model," we’ve seen how they used lattice simulations and Ward identities to establish a fully nonperturbative definition for those traceless components <ref:2611.14324#pg1,Non-perturbative renormalization of the energy-momentum tensor in the 2d O>.
Mira: They achieved this by imposing discretized versions of continuum Ward identities on one-point functions using shifted boundary conditions, and they found renormalization constants that are accurate to better than a permille across the bare coupling range from zero up to point six.
Lev: And the key result is that when they check this against the Equation of State and compare it with exact thermodynamic predictions, their extrapolated entropy density s0 matches the continuum prediction s cont0 within sub-permille precision, even though ZT differs from one by three to four percent in that coupling range.
Kai: That means the method holds up under a rigorous test, which is exactly what we need when we’re thinking about applying these ideas to higher dimensional theories like Yang-Mills theory.
Mira: The paper establishes this nonperturbative framework as an ideal model for investigating and validating new methods because the O(three) model offers reduced computational cost compared to simulating more complex systems <ref:2611.14324#pg1>.
Lev: So, in short, they’ve obtained a nonperturbative determination of the renormalization constants for the traceless components of the energy-momentum tensor on the lattice with sub-permille precision across that coupling range.
Conclusion: Kai: So, we’re finishing up on this paper about nonperturbative renormalization of the energy-momentum tensor in the two dimensional O three non linear sigma model.
Mira: Right, they essentially showed how to define those traceless components of the energy-momentum tensor without relying on just standard perturbation theory.
Lev: That means they used lattice simulations and something called Ward identities to figure out these renormalization constants directly.
Kai: What does that actually mean for the physics we’re trying to study?
Mira: It gives us a nonperturbative way to handle those tensors, which is pretty crucial because higher dimensional theories like Yang-Mills rely on this kind of treatment.
Lev: And it means they got these results with subpermille precision across a whole range of bare coupling constants from zero up to point six. That’s solid work for the model they used.
Kai: So, the authors are using this simpler two dimensional O three model as a testing ground for more complex renormalization techniques.
Mira: Exactly, it’s an ideal framework because the simulations are less computationally expensive than running full Yang-Mills theory.
Lev: But you have to remember that any transfer from this model to something like QCD has its own set of challenges, especially when you consider the finite volume effects in that compact direction.
Kai: True, we need to keep an eye on those finite volume corrections because they might not cancel out perfectly when we go up in dimension.
Mira: Well, the fact that their extrapolated equation of state matches the exact continuum prediction so closely is a strong validation for how they set up this renormalization procedure.
Lev: It shows that if you can nail this nonperturbative definition in a simpler system, you have a much better idea of what to expect in more complicated environments.
Kai: So, we’ve seen them build this solid foundation on the O three model, and now it’s time to think about how those tools actually translate over to theories like Yang-Mills.
Leonardo Giusti, Mitsuaki Hirasawa, Michele Pepe
Department of Physics Giuseppe Occhialini University of Milano Bicocca · INFN Milano Bicocca Institute for Nuclear Physics Department Theoretical Physics Department CERN
hep-lat
Submitted: 2026-11-10
Updated: 2026-11-10
Comments: 18 pages, 7 figures
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 95/100
The gist: Non-perturbative renormalization of the energy-momentum tensor in the 2d O(3) non-linear sigma-model establishes a fully nonperturbative definition of its traceless components by determining their…
Key concepts
- Energy-Momentum Tensor
- This tensor describes the energy and momentum distribution within a physical system. In this study, the focus is on its traceless components—parts that capture specific geometric properties of the model—and how they are renormalized non-perturbatively on a lattice.
- Non-perturbative Renormalization
- This refers to calculating physical quantities (like coupling constants) directly from lattice simulations rather than using perturbation theory, which relies on small coupling approximations. The paper uses Monte Carlo methods and Ward identities to find the correct renormalization constants for the tensor components.
- Shifted Boundary Conditions
- These are specific boundary conditions applied to the field on a finite lattice volume. They allow researchers to define correlation functions non-perturbatively by relating them to derivatives of the free-energy density, which is key for extracting renormalization constants.
- Ward Identities
- These are mathematical relationships that must be satisfied by the correlation functions of a physical theory in the continuum limit. The paper uses discretized versions of these identities to define and constrain the non-perturbative renormalization constants for the tensor components.
Terminology
Summary
Non-perturbative renormalization of the energy-momentum tensor in the 2d O(3) non-linear sigma-model establishes a fully nonperturbative definition of its traceless components by determining their renormalization constants through lattice simulations and Ward identities, which is crucial for applying these methods to higher dimensional theories like Yang-Mills theory
Theoretical Framework
The paper constructs the traceless components of the energy-momentum tensor on a lattice for the two-dimensional O(3) non-linear sigma-model such that their correlation functions satisfy the appropriate Ward identities in the continuum limit The theory is defined by standard lattice discretizations of both the action and the energy-momentum tensor The discretization of space-time entails that the traceless two-index symmetric irreducible representation of O(2) splits into two irreducible representations of the dihedral group D4, each requiring an independent renormalization constant These constants are defined non-perturbatively by imposing discretized versions of continuum Ward identities for one-point functions in the presence of shifted boundary conditions The non-perturbative calculations are then carried out by Monte Carlo simulations, and the resulting renormalization constants are determined with a final accuracy better than a permille throughout the investigated range of the dimensionless bare coupling constant squared 0 ≤ g squared ≤ 0.6
Renormalization Strategy
The strategy utilizes shifted boundary conditions to define the energy-momentum tensor nonperturbatively on the lattice The system is formulated in a finite volume of extent L0 in the compact direction and spatial size L1 Along the compact direction the field satisfies the shifted boundary condition σ(x0 + L0, x1) = σ(x0, x1 − L0ξ), where ξ is a dimensionless shift parameter An important consequence of shifted boundary conditions is the equation ⟨T01⟩ξ = −∂/∂ξ f(L0, ξ), which relates the expectation value of the offdiagonal component of the energy-momentum tensor to the response of the free-energy density under a infinitesimal variation of the shift parameter Moreover, an interesting Ward identity connects the two components of the traceless tensor (1 − ξ 2)⟨T01⟩ξ = ξ ⟨T00 − T11⟩ξ These identities are the direct analogue of those employed in the Yang-Mills theory and in QCD to renormalize non-perturbatively the energy-momentum tensor
Numerical Study and Results
Monte Carlo simulations were performed using the Wolff cluster algorithm for efficient sampling The renormalization constant ZT is determined from Eq. (11) using the shift ξ = 1 The renormalization constant zT is obtained by imposing the Ward identity relating the off-diagonal and the traceless diagonal components The extrapolation of finite-L0 estimates to the 1/L0 → 0 limit at fixed bare coupling removes L0-dependent discretization effects The extrapolated values ZT(g 2 0) and zT(g 2 0) are listed in Tab. p. 2 I and shown in the bottom panel of Fig. p. 5 7
Equation of State Validation
The Equation of State is computed at a fixed temperature and compared with the exact prediction obtained from the Thermodynamic Bethe Ansatz and the Non-Linear Integral Equations The entropy density s(T)T = −E0(T)/T is then determined from s(T) = dp(T)/dT The agreement between the extrapolated value s0 and the exact continuum prediction s cont0 provides a stringent non-perturbative test of the determination of ZT, which differs from unity by 3–4% in the range of bare couplings considered
Conclusion
In this work we have established a fully nonperturbative definition of the traceless components of the energy-momentum tensor in the two-dimensional O(3) non-linear sigma-model whose correlation functions satisfy the appropriate Ward identities in the continuum limit By adapting these techniques to the O(3) model, we have obtained, with a sub-permille precision, a nonperturbative determination of the renormalization constants of the traceless components of the energy-momentum tensor on the lattice as given in Eq. (9) using the standard lattice action over the range 0 ≤ g 2 0 ≤ 0. p. 86 of the bare coupling The O(3) model represents an ideal framework in which to investigate and validate new non-perturbative methods due to the reduced computational cost of numerical simulations The non-perturbative renormalization of the energy-momentum tensor is a necessary step for future applications, like, for instance, the developments of new strategies for the computation of spectral densities at finite temperature and transport coefficients Once validated in the simplified framework of the O(3) model, such new methodologies can be transferred to the Yang-Mills theory and QCD
Appendix A
Since the two-dimensional O(3) model has a dynamically generated mass-gap, finite-volume corrections induced by the finite spatial extent are exponentially suppressed Denoting by m(L0) the mass-gap at finite L0, the leading corrections are expected to scale as e−m(L0/γ) L1γ up to polynomial prefactors However, these effects largely cancel in the ratios defining the renormalization constants, so that the finite-volume dependence of ZT and zT at aspect ratio L1/L0 = 50, is negligible within the statistical accuracy of the numerical data in the whole range of coupling 0 < g 2 0 ≤ 0.6
Appendix B
The perturbative computation of ZT is obtained by evaluating Feynman diagrams for both the space-time components of the energy-momentum tensor and the free-energy density The lattice integrals appearing in these expressions are defined in subsection B 3 The one-loop perturbative prediction for ZT is represented by the red line, while the blue curve corresponds to a fit of the form ZT(g 2 0) = Z(0)T + Z(1)Tg 2 0 + p squared g 4 0 + p3 g 6 0
Appendix C
The Monte Carlo simulations are performed with the heat-bath updating algorithm and the standard estimator for measuring observables The precision of these measurements reaches approximately 0.5h with statistics of 3. p. 82 × 10 8 sweeps for each set of parameters The collected statistics at given value of the bare coupling g 2 0 in units of 10 8 sweeps are 2. p. 85, 4, 5, 6.25, 8 and 40 for L0/a = 6, 8, 10, 12, a/L0 = a/L1 = a/L0 = a/L1 = a/L long The precision is approximately 0. p. 62–0.8h
Appendix D
The covariance between ⟨T[1]01⟩ξ=2 and ⟨T[3]00−T[3]11⟩ξ=2 is provided in Table IX The simulations are performed with the shift parameter ξ = 2 The precision for these observables reaches approximately 0.07–0.2h at L1/L0 = 50 and 0.3h at L1/L0 = 100
Appendix E
The overall renormalization constant ZT of the energy-momentum tensor is shown in the top panel of Fig. 7 The relative numerical precision achieved for this constant is approximately 0. p. 93–0.45h at L1/L0 = 50 and 0. p. 9 p. 9 p. 918–0.3h at L1/L0 = 100 The relative renormalization constant zT is presented in the bottom panel of Fig. p. 9 p. 9 7 Its precision is roughly 0. p. 9 p. 9 p. 908–0.12h at L1/L0 = 50 and 0. p. 9 p. 9 p. 9 p. 92–0.28h at L1/L0 = 100 The nonperturbative results are consistent with the one-loop perturbative prediction within statistical uncertainties up to approximately g 2 0≃ 0. p. 63
Appendix F
The entropy density s(T)T = dp(T)/dT is then determined from s(T) = dp(T)/dT The agreement between the extrapolated value s0 and the exact continuum prediction s cont0 provides a stringent non-perturbative test of our determination of ZT, which differs from unity by 3–4% in the range of bare couplings considered The resulting fit is shown as a blue band in Fig. 4 The extrapolated value s0 is statistically consistent with the exact continuum prediction s cont0, with sub-permille precision
Appendix G
The simulations are performed with the shift parameter ξ = 2 The expectation value of the off-diagonal component of the energy-momentum tensor, ⟨T[1]01⟩ξ=2 is displayed in the top panel of Fig. 6 The precision for these measurements reaches approximately 0. p. 9 p. 91h at L1/L0 = 50 and 0.3h at L1/L0 = 100 An analogous plot is presented in the bottom panel of Fig. p. 9 6 for the traceless diagonal component, ⟨T[3]00−T[3]11⟩ξ=2 The precision is roughly 0. p. 508–0.12h at L1/L0 = 50 and 0.2–0.28h at L1/L0 = 100 The overall renormalization constant ZT of the energy-momentum tensor is shown in the top panel of Fig. p. 9 7 The relative numerical precision for this constant is approximately 0. p. 9 p. 9 p. 93–0.45h at L1/L0 = 50 and 0.18–0.3h at L1/L0 = 100 The relative renormalization constant zT is presented in the bottom panel of Fig. 7 Its precision is roughly 0.08–0.12h at L1/L0 = 50 and 0.2–0.28h at L1/L long The nonperturbative results are consistent with the one-loop perturbative prediction within statistical uncertainties up to approximately g 2 0≃ 0. p. 63
Appendix H
The final accuracy of the extrapolations yields statistically good quality fits over the full range of bare couplings considered, with a χ 2/dof ranging from 0.07 to 2.3 and attaining a final accuracy below 0. p. 6 p. 6 p. 61h The resulting values of zT(g 2 0) are listed in Tab. p. 6 p. 6 p. 6 I and displayed in the bottom panel of Fig. p. 6 p. 6 p. 6 3 The entropy density s(T)/T as a function of (a/L0) squared together with the analytically computed continuum value s cont0 describes the data within their statistical uncertainties, with s0 = 1. p. 7 p. 7 p. 76018(2), s1 = 0. p. 71617(2) The resulting fit is shown as a blue band in Fig. p. 7 4 The extrapolated value s0 is statistically consistent with the exact continuum prediction s cont0, with sub-permille precision
Appendix I
The final accuracy of the extrapolations yields statistically good quality fits over the full range of bare couplings considered, with a χ 2/dof ranging from 0.07 to 2.3 and attaining a final accuracy below 0.1h The resulting values of zT(g 2 0) are listed in Tab. I and displayed in the bottom panel of Fig. 3 The entropy density s(T)/T as a function of (a/L0) squared together with the analytically computed continuum value s cont0 describes the data within their statistical uncertainties, with s0 = 1.6015(3), with sub-permille precision The agreement between the extrapolated value s0 and the exact continuum prediction s cont0 provides a stringent non-perturbative test of our determination of ZT, which differs from unity by 3–4% in the range of bare couplings considered
Appendix J
The simulations are performed with shift parameter ξ = 1 The expectation values of the space-time component of the energy-momentum tensor ⟨T[1]01⟩ξ=1 are reported in Tab. V The derivative of free-energy with respect to the shift ∆f/∆ξ is estimated using the method discussed in Section III C The collected statistics at given value of the bare coupling g 2 0 in units of 10 8 sweeps are 2. p. 35, 4, 5, 6.25, 8 and 40 for L0/a = a/L1 = a/L0 = a/L1 = a/L long The precision is approximately 0. p. 62–0.8h
Appendix K
The expectation value of the off-diagonal component of the energy-momentum tensor, ⟨T[3]00−T[3]11⟩ξ=2 is displayed in the top panel of Fig. 6 The precision for these measurements reaches approximately 0.1h at L1/L0 = 50 and 0.3h at L1/L0 = 100
Appendix L
The overall renormalization constant ZT of the energy-momentum tensor is shown in the top panel of Fig. 7 The relative numerical precision for this constant is approximately 0.3–0.45h at L1/L0 = 50 and 0.18–0.3h at L1/L long The relative renormalization constant zT is presented in the bottom panel of Fig. p. 9 7 Its precision is roughly 0.08–0.12h at L1/L0 = 50 and 0.2–0.28h at L long The nonperturbative results are consistent with the one-loop perturbative prediction within statistical uncertainties up to approximately g 2 0≃ 0. p. 63
Appendix M
The simulations are performed with the shift parameter ξ = 2 The expectation value of the off-diagonal component of the energy-momentum tensor, ⟨T[3]00−T[3]11⟩ξ=2 is displayed in the bottom panel of Fig. 7 The precision for these measurements reaches approximately 0. p. 908–0.12h at L1/L long The overall renormalization constant ZT of the energy-momentum tensor is shown in the top panel of Fig. p. 9 7 The relative numerical precision for this constant is approximately 0.3–0.45h at L1/L long
Appendix N
The final accuracy of the extrapolations yields statistically good quality fits over the full range of bare couplings considered, with a χ 2/dof ranging from 0.07 to 2.3 and attaining a final accuracy below 0.1h The resulting values of zT(g 2 0) are listed in Tab. I and displayed in the bottom panel of Fig. 3 The entropy density s(T)/T as a function of (a/L0) squared together with the analytically computed continuum value s cont0 describes the data within their statistical uncertainties, with s0 = 1.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved renormalization constant determination for energy-momentum tensor components: The system can now perform nonperturbative determination of renormalization constants for traceless components using Ward identities derived from shifted boundary conditions, a strategy adapted from Yang-Mills theory and QCD.
-
Enhanced calculation of finite temperature spectral densities: The methodology enables the investigation of finite temperature spectral densities and real-time properties associated with the energy-momentum tensor, addressing challenges in lattice field theory.
-
Computation of Equation of State comparison: The system can compute the Equation of State at a fixed temperature and compare results against exact predictions from Thermodynamic Bethe Ansatz and Non-Linear Integral Equations.
-
Precise determination of nonperturbative renormalization constants: By imposing discretized versions of continuum Ward identities, the system obtains a nonperturbative determination of renormalization constants for the traceless components, achieving accuracy better than a permille for the investigated range.
-
Finite-volume effect mitigation: The use of specific shift parameters and extrapolation methods allows for the removal of leading finite-volume corrections to renormalization constants, ensuring their definition in the thermodynamic limit is robust.
Sources
- Walking near a Conformal Fixed Point: the 2-d O(3) Model at theta near pi as a Test Case
- Resurgence and Trans-series in Quantum Field Theory: The CP(N-1) Model
- The puzzle of apparent linear lattice artifacts in the 2d non-linear sigma-model and Symanzik's solution
- Logarithmic corrections to O(a^2) lattice artifacts
- Drastic Reduction of Cutoff Effects in 2-d Lattice O(N) Models
- Simulating the All-Order Strong Coupling Expansion III: O(N) sigma/loop models
- Energy-momentum tensor on the lattice: non-perturbative renormalization in Yang--Mills theory
- Non-perturbative definition of the QCD energy-momentum tensor on the lattice
- Thermal momentum distribution from path integrals with shifted boundary conditions
- Thermodynamic potentials from shifted boundary conditions: the scalar-field theory case
- Implications of Poincare symmetry for thermal field theories in finite-volume
- The QCD energy-momentum tensor on the lattice: non-perturbative renormalization with N f=3
- Energy-momentum tensor in the 2d $O(3)$ non-linear sigma model on the lattice
- Inclusive rates from smeared spectral densities in the two-dimensional O(3) non-linear $\sigma$-model
- Equation of state of a relativistic theory from a moving frame
- Topological Lattice Actions
- QCD Equation of State with $N_f=3$ Flavors up to the Electroweak Scale
- Non-perturbative thermal QCD at all temperatures: the case of mesonic screening masses
- QCD Equation of State at very high temperature: computational strategy, simulations and data analysis
- The finite size spectrum of the 2-dimensional O(3) nonlinear sigma-model
Related papers
- Heavy-Meson Bag Parameters using Gradient Flow
- Impact of Irrep Truncations on Quantum Simulations of QCD
- Evaluating generative samplers for lattice field theory by scale
- Renormalized symmetry probes for emergent symmetries and non-chiral lattice fermions
- Scalable Generative Sampling and Multilevel Estimation for Lattice Field Theories Near Criticality
- Lattice QCD study of the K*(892) resonance at the physical point