Lattice Hamiltonians for Chiral Gauge Theories

arXiv:2611.13886 · hep-lat, hep-th, quant-ph · Submitted 2026-11-10 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Lattice. The day in lattice field theory: what the simulations put on the table.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Lattice Hamiltonians for Chiral Gauge Theories".

Mira: Here's the gist of the paper. A lattice Hamiltonian for chiral gauge theories on the boundary of a slab is presented, which is significant because it provides a non-perturbative definition of chiral gauge theories and serves as a starting point for quantum circuit construction The formulation allows Gauss’s law to be satisfied exactly by construction, making it suitable for first-principle studies of strongly coupled chiral gauge theories.

Kai: Physical Picture Any slab with massive bulk fermions can be interpreted as a capacitor where the boundary and far wall are plates, and the bulk is the dielectric screening the electric field of a boundary charge The construction involves several key properties to realize chiral gauge theories on the boundary, including: 1.

Mira: Boundary Weyl modes, where any mirror partners must decouple.

Paper summary: Kai: So we’re looking at this paper by Grabowska and others called Lattice Hamiltonians for Chiral Gauge Theories, and it sets up a lattice Hamiltonian for chiral gauge theories on the boundary of a slab. Mira, can you give us the quick rundown on what they're actually proposing?

Mira: Well, basically, they’re presenting a formulation that defines chiral gauge theories in a non-perturbative way using this lattice setup. The core idea is that by putting bulk fermions in this slab, you get a capacitor picture where the boundary and the far wall are plates and the bulk is like a dielectric screening the charge on one side.

Kai: So, what’s their main claim here? What makes this specific construction significant for physics?

Mira: They claim that this formulation allows Gauss’s law to be satisfied exactly by construction. That’s super important because it lets them do first-principle studies of strongly coupled chiral gauge theories. It also sets up a starting point for building quantum circuits.

Lev: From an error correction standpoint, if Gauss’s law holds exactly, that simplifies things immensely when you're trying to model real hardware or simulate these systems.

Kai: Exactly. And they achieve this by making sure they have a few key properties in mind: boundary Weyl modes must decouple from their mirror partners, there needs to be bulk topological charge ensuring an exact U(one)A that only breaks on the boundary, and the fermion content has to behave differently for anomalous versus anomaly-free particles <ref:2611.13886#pg1>.

Mira: Right. It’s about having these three consistency checks built into the structure of the theory itself. They build this Hamiltonian in terms of boundary gauge variables, an integer label representing topological charge, and fermion modes. The bulk is then described as a dielectric with a localized instanton that binds the charge expelled by the boundary.

Lev: When you look at how they set up the bulk gauge field dynamics, they use this configuration function F of n over X to describe the stationary bulk with n units of topological charge. It’s interesting how they handle things differently in four dimensions versus three dimensions, where you only get a Chern-Simons number for the three dimensional field.

Kai: And then there’s this question about whether the boundary is truly on its own, which boils down to Gauss’s law being tested by splitting an equation into four parts: the total charge plus Weyl modes plus instanton charge plus rest.

Mira: They show that the perturbative condition is local, involving massive modes and how they respond near the boundary through anomaly inflow. This is where they test if it's truly on its own.

Lev: From an error correction point of view, testing locality like that is crucial for figuring out what kind of constraints you need to put on your physical qubits or simulation setup.

Kai: So, looking at the outlook for this paper, they’ve shown all those required properties—mirror mode decoupling and degeneracy after Pauli-Villars subtraction—for realizing chiral gauge theories on a boundary. They found that the boundary satisfies its own Gauss’s law in the low-energy spectrum only when the content is anomaly free, and both anomaly conditions take this form.

Mira: And they mention two remaining questions they haven't settled: whether a dynamical gauge field actually breaks the conserved charge, and if a field coupled to that boundary topological density acquires a potential.

Lev: That’s where the real work for building something practical would start—figuring out how those dynamics affect the effective low-energy physics we’d need for an error correction code.

Kai: Moving onto the conclusion of this paper, they call it Lattice Hamiltonians for Chiral Gauge Theories. The authors are presenting a lattice Hamiltonian that defines chiral gauge theories on a boundary using this specific setup involving bulk fermions and topological charge.

Mira: It suggests that by setting up the lattice Hamiltonian this way, you can get a non-perturbative definition of these theories, which is significant because it’s a starting point for quantum circuit construction.

Lev: For me, it means we have a concrete structure to work with when designing error correction codes for systems involving chiral dynamics on surfaces. It moves the problem from abstract math to something that could actually be simulated or built.

Kai: And what this paper implies is that the way we define these boundary theories can directly dictate how quantum circuits are constructed from them. It gives us a clear, non-perturbative starting point for those circuits.

Mira: So, in short, it’s about using lattice Hamiltonians to rigorously define chiral gauge theories on boundaries, showing consistency in their structure and setting the stage for building actual quantum circuit models.

Conclusion: Kai: So this paper is called Lattice Hamiltonians for Chiral Gauge Theories, and it lays out how you can define these chiral theories non-perturbatively using a lattice setup on a boundary.

Mira: It’s about taking this specific geometry—a slab with massive bulk fermions—and turning it into a capacitor picture where the boundary and far wall are plates.

Lev: So what does that mean for the actual math? What's the big takeaway here?

Kai: The key is they show you can satisfy Gauss’s law exactly just by how you build that lattice Hamiltonian, which lets us study strongly coupled chiral gauge theories without relying on approximations.

Mira: They tackle some tough consistency checks too, like making sure the boundary Weyl modes decouple from their mirror partners and that the bulk topological charge behaves exactly as expected only at the boundary.

Lev: That kind of exact construction is valuable because it gives us a solid starting point for building actual quantum circuits, which is what we're trying to do for real hardware.

Kai: So, they’re giving us a way to build these complex theories from the ground up using lattice tools that have been thoroughly checked numerically.

Mira: It suggests that the structure of our quantum circuits might be dictated by how we set up these bulk and boundary field interactions at the fundamental level.

Lev: And if you can define a theory this precisely, it helps us figure out exactly where the overhead lands when we try to implement error correction for something with chiral dynamics.

Kai: It seems like they’ve given us a very concrete framework to test how these kinds of theories behave in a way that's hard to see through other methods.

Mira: The next step is figuring out whether those exact mathematical properties translate into physical behavior we can observe in simulations or experiments.

Dorota M. Grabowska

University of Washington · InQubator for Quantum Simulation

hep-lat, hep-th, quant-ph

Submitted: 2026-11-10

Updated: 2026-11-10

Comments: 6 pages + 2 pages End Matter + 17 pages appendices, 3 figures, 4 tables

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 94/100

The gist: A lattice Hamiltonian for chiral gauge theories on the boundary of a slab is presented, which is significant because it provides a non-perturbative definition of chiral gauge theories and serves as a…

Key concepts

Boundary Weyl modes
These are specific modes in the theory where mirror partners must decouple. This decoupling is a key requirement for realizing chiral gauge theories on the boundary, ensuring that only one type of mode exists at the edge.
Bulk topological charge
This refers to a four-dimensional quantity in the bulk that ensures an exact U(1)A symmetry. The anomaly inflow mechanism dictates that this topological charge's presence breaks anomalies only on the boundary, which is crucial for chiral theories.
Gauss’s Law as Anomaly Conditions
The condition for whether a boundary exists is tested by splitting a total equation into four parts: Weyl modes, instanton contributions, and rest. The perturbative condition involves how massive bulk modes respond near the boundary through anomaly inflow.

Terminology

Summary

A lattice Hamiltonian for chiral gauge theories on the boundary of a slab is presented, which is significant because it provides a non-perturbative definition of chiral gauge theories and serves as a starting point for quantum circuit construction The formulation allows Gauss’s law to be satisfied exactly by construction, making it suitable for first-principle studies of strongly coupled chiral gauge theories. p. 0

Physical Picture

Any slab with massive bulk fermions can be interpreted as a capacitor where the boundary and far wall are plates, and the bulk is the dielectric screening the electric field of a boundary charge The construction involves several key properties to realize chiral gauge theories on the boundary, including:

  1. Boundary Weyl modes, where any mirror partners must decouple. p. 0

  2. Bulk topological charge, which ensures an exact U(1)A that anomaly inflow breaks only on the boundary. p. 0

  3. Consistency of fermion content, where anomalous and anomaly-free content must behave differently. p. 0

Hamiltonian Construction

The Hamiltonian is defined in terms of boundary gauge variables, an integer label, and fermion modes The bulk enters as a dielectric with a localized instanton that binds the charge expelled by the boundary. The Hamiltonian includes terms such as the electric term summing over boundary links and hopping terms summing over every link of the slab. p. 1 The gauge fixing leaves one constraint, which is that states must satisfy Ltot + Qtot Ψ = 0. p. 2

Bulk Gauge Field Dynamics

The bulk is determined by the boundary configuration X and an integer label n through the configuration F(n)(X) which represents the stationary bulk of lowest action holding n units of topological charge. The fixed point extends the boundary by the bulk’s equations of motion as in Refs. p. 2 [8, 11, 12]. Topological charge is a four-dimensional quantity, and a three-dimensional field has only a Chern-Simons number. p. 2

Anomaly Conditions as Gauss’s Law

The question of whether the boundary is one on its own boils down to Gauss’s law, which is tested by splitting Eq. (3) into four contributions: Ltot + QWeyl + Qinst + Qrest Ψ = 0. p. 4 The perturbative condition is local, involving the massive modes and their response near the boundary through anomaly inflow. p. 4

Outlook

The construction has been shown to possess all three required properties for realizing chiral gauge theories on a boundary, including mirror mode decoupling and degeneracy of sheets after Pauli-Villars subtraction. The boundary satisfies its own Gauss’s law in the low-energy spectrum only when the content is anomaly free, and both anomaly conditions take this form. p. 5 Two remaining questions concern whether a dynamical gauge field breaks the conserved charge or if a field coupled to the boundary topological density acquires a potential. p. 5

Numerical Tests of the Construction

Numerical checks confirmed that the crossing level has no weight on the far wall (decoupling), sheets are degenerate once Pauli-Villars subtraction is included (no bulk barrier), and exactly one level per flavor crosses zero. The results show that for even Nf, the state with all Nf levels occupied lies in the low-energy spectrum in a large volume. p. 4

The Bound Level

The bound level on the mid-slab configuration is found to be at various values depending on M, and it crosses zero at the lower edge of the index window and deepens with M through M = 1.5. The weight of this level on the far wall is shown to be exponentially small for modes outside a certain range. p. 5

The Bulk Instanton

The bulk instanton is localized at mid-slab and its size is set by the action of the flow, with its continuum limit not taken here. The geometric charge of the bulk instanton at mid-slab is one, while L¨uscher’s geometric charge [38] of the same configuration is 1. p. 2000000.

The Screened Electric Coupling

The shift DXΦ in Eq. (1) shows that the charge at any depth is seen in full at zero transverse momentum, and it is damped at nonzero ones by a form factor of Refs. p. 2 [3, 4]. The choice of kernel determines how bulk charges enter the electric term and nothing else, with the point coupling fs = 1 allowing the mirror to see the boundary field undamped. p. 7

The Register

The register is tied to the rods by a prescription that it changes by one when NCS crosses a particular surface, allowing (X, n) to move continuously. A phase e iθ could enter only in the matching of the wavefunction across the sphaleron surface, and this is removed by the unitary e iθnˆ. p. 4

Pauli-Villars Terms

The Pauli-Villars terms are added to regulate bulk fermions as three functionals of the rods, a potential, a Berry connection, and an inertia correction. The Hamiltonian of the rods is then given by Hreg = H EL(κ)→EL(κ)−APV κ, G→G+IPV + V PV. p. 7

The Far Wall Prescription

The far wall is flat and is fixed by its three commuting holonomies, which the construction sets from the boundary’s Polyakov loops. This prescription is covariant and depends on no single base point. p. 8

The Inertia Correction

The inertia correction I PV is the sum of a transverse part from the first and a Coulomb part from the second, with its lowest eigenvalue being linear in Ls. The condition K > 0 quantifies whether the dielectric constant stays positive. p. 4

The Results

The n = 2 sheet gives two units side by side at s = 5–6 with action 40.63, three percent below twice the single unit’s 20. p. 897. After Pauli-Villars subtraction its Dirac vacuum is degenerate with the trivial one to 1. p. 04 × 10−3, and the state at fixed fermion number lies 0. p. 481 above it, twice the n = 2 bound level. p. 3

The Perturbative Criterion in a U(1) Slab

The locality criterion of Refs. [3, 4] was tested in the Hamiltonian with no dynamics, showing that the boundary’s own Gauss’s law is sensitive to how the bulk is built exactly when the anomaly does not cancel. p. 8 The charge-zero fermion balances the number of left and right movers and plays no part here. p. 7

The Holonomy of the Global Constraint

The loop is a 2π rotation of the rods about a fixed axis, which is non-contractible as a loop in SO(3) and contractible in rod space. The relative holonomy of the two sheets is (−1)Nf for Nf = 1, which is the sign of Witten’s condition. p. 8

The inertia correction I PV has lowest eigenvalue −0.0025, −0.0021 and −0.0098 on the three volumes at every Ls. p. 3 The static response of the two seas together is unchanged to five digits between Ls = 4 and 16. p. 3

The Electric Part of the Sheet Difference

The Coulomb energy of the sea’s charge correlations is P xy G xy⟨Qx ·Qy⟩, and its difference between the sheets, with Pauli-Villars counterpart subtracted, is −2 × 10−5 and −1 × 10−5 on 63 × 12 and 63 × 16.

The Singular Set

Berry phases of the filled sea were computed on a generic boundary to test the prescription’s singular set, and the phase of the filled sea is zero on the controls, with gaps of 1.30 and 0.76. The Pauli-Villars sea was not included in these loops. p. 8

Occupations

The occupations of where missing fermions sit on a wound sheet depend on the volume, with Table III listing these occupations and center parity. The parity is (−1)F of the boundary relative to the trivial sheet. p. 4 p. 4

The occupations of where missing fermions sit on a wound sheet depend on the volume, with Table III listing these occupations and center parity (−1)F of the boundary relative to the trivial sheet. The parity is (−1)F of the boundary relative to the trivial sheet.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI systems can be used to construct quantum circuits built on top of pure-gauge primitives, as stated in Every term in the Hamiltonian is defined in terms of the boundary gauge variables, the integer label and the fermion modes, a starting point for quantum circuit construction.

  2. Improved AI systems can perform numerical tests to check if a lattice Hamiltonian realizes chiral gauge theories by verifying three properties: mirror modes decoupling, sheets being degenerate after Pauli-Villars subtraction, and exactly one level per flavor crossing zero.

  3. Improved AI systems can determine the bulk gauge field configuration F(n)(X) by seeding the bulk with a given topological charge n and relaxing with gradient flow of a bulk action S in fictitious time tau.

  4. Improved AI systems can analyze the structure of Gauss's law solutions by separating Eq. (3) into four contributions: Ltot, QWeyl, Qinst, and Qrest to determine when the boundary is one on its own.

  5. Improved AI systems can simulate the slow rod modes by expanding their effective action in terms of nu/M and calculating the Berry connection and inertia correction to derive Hreg.

  6. Improved AI systems can compute ground state energies E[X] for static backgrounds by using Eq. (B4), which is the same quantity as the energy of the Euclidean domain-wall theory with its Pauli-Villars fields in a static background.

  7. Improved AI systems can analyze the dependence of bulk energy on background gauge fields by showing that The subtracted potential V(theta x) = E(theta x) − E(0) converges to 0.0375 at theta x = 0.6 and 0.1395 at theta x = 1.2.

  8. Improved AI systems can evaluate the inertia correction I PV of the partners by summing a transverse part from the first and a Coulomb part from the second to determine when K > 0 holds for g squared < 1.3, 0.7, and 0.5 at Ls = 4, 8, and 12 on volume sizes of 33 and below.

  9. Improved AI systems can perform a check on the prescription for the far wall by verifying that The averaged prescription gives a wall within 0.08 of the identity at every lambda on computed windings.

Sources

Related papers