An IoT Based Approach for Platform Independent Positioning Service

arXiv:2611.13634 · cs.RO · Submitted 2026-11-10 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.

Rosa: We're looking at the paper: "An IoT Based Approach for Platform Independent Positioning Service".

Title and authors: Rosa: So we’re talking about this paper called "An IoT Based Approach for Platform Independent Positioning Service". Rosa, what’s the big picture here?

Dev: It’s about taking a system that used to be stuck inside a mobile app on an Android or iOS phone and making it work everywhere by using an Internet of Things device.

Rosa: Exactly. The core idea is moving the heavy lifting of signal collection off the phone itself and onto this dedicated hardware, which then feeds into the location service through a server.

Dev: It’s trying to remove those OS restrictions that limit how fast or how often you can scan for WiFi signals, which was a big problem with earlier systems like KAILOS.

Taro: So it sounds like they are trying to build something that doesn't care if the user is on an iPhone or an Android, which is a practical goal in real-world deployment.

Rosa: Right. The authors introduce this extended architecture, which includes a dedicated IoT device paired with the smartphone for accessing positioning services, even when the phone’s operating system restricts access to WiFi signals at a high rate.

Dev: It sets up this whole framework involving the IoT device, front-end server, back-end server, database, and map registration tools to manage everything.

The paper's summary: Rosa: So what’s the actual mechanism they propose? Basically, they suggest that instead of relying on the phone to constantly scan for WiFi signals at a high frequency, this hardware device does that work independently.

Dev: The IoT device has a processing unit with WiFi, 4G LTE, Bluetooth low energy, an IMU sensor for movement data, and even GPS. It’s designed to handle the signal collection in different phases: initializing phase, positioning phase, and sleeping phase.

Rosa: During the positioning phase specifically, this device scans available WiFi signals and sends that collected data to the server via 4G LTE so it can estimate its location.

Dev: And that data goes into a database that stores indoor maps, radio maps, and sensor data collected from these end devices, which is key for building a comprehensive positioning picture.

Taro: That database structure sounds important because it’s not just about one device; it’s about crowdsourcing information to build a richer map for everyone.

Rosa: They also focus on how this architecture helps users access locating services regardless of the operating system, solving that platform dependence issue they mentioned earlier.

Dev: It basically says that by using this IoT approach, you get the advantage of non-OS constraints and potentially group user benefits because many people can contribute to the map data.

The paper's improvements: Rosa: One major improvement they highlight is moving away from the mobile app being the sole source of signal input, which was a huge limitation because Android and iOS have very different rules on how much WiFi scanning you can do.

Dev: They show that this IoT-based approach offers advantages in terms of accuracy, scanning frequency, and time per scan when compared to just using the standard Android or iOS apps alone.

Taro: I saw something about pedestrian dead reckoning experiments too; they tested different sampling rates on the movement data from the IoT device.

Rosa: Yes, they did. They found that for pedestrian dead reckoning experiments, using a higher sampling rate, like one hundred Hertz data, gave a better match with the ground truth trajectory compared to lower rates like twenty-five Hertz or fifty Hertz data.

Dev: That’s because you can adjust the sampling frequency independently on the hardware device, which lets you optimize how much data you collect for your specific needs.

Taro: And they also added some clever pre-processing to their WiFi fingerprinting results; they mentioned that the device detects and removes abnormal access points by checking missing information from each AP before selecting only the top twenty ranked APs.

Rosa: So, it’s not just about collecting more data; it’s about cleaning up the data you collect so that the final location estimation is more robust against bad signals.

Conclusion: Dev: To wrap this up, the paper suggests that having a dedicated positioning hardware device equipped with various sensors provides high-quality data for the location server by removing those OS restrictions entirely.

Rosa: It shows that this approach is promising because it allows users to access locating services regardless of their mobile platform and gives them control over signal collection periods for each sensor.

Taro: What this means for the future is that we’re looking at the very first step toward producing an indoor outdoor positioning system on a wearable device, which opens up new possibilities beyond just smartphone applications.

Dev: It's about creating a system where the hardware handles the heavy lifting, freeing up mobile platforms to focus on other things, and that’s how you get better performance.

Rosa: So it really comes down to using this IoT based approach for platform independent positioning service to unlock real-life applications for indoor localization services across different devices.

Anh-Van Vu, Dongsoo Han

Korea Advanced Institute of Science and Technology

cs.RO

Submitted: 2026-11-10

Updated: 2026-11-10

Comments: 8 pages

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 74/100

The gist: KAIST Indoor Localization System (KAILOS) was introduced in 2014 and became one of the world-first complete indoor positioning solutions.

Key concepts

Extended KAILOS Architecture
This is an enhanced system design that integrates a dedicated IoT device with mobile applications and servers. The goal is to bypass operating system limitations on signal scanning, enabling the positioning service to work reliably across different phones without needing app installations or OS-specific permissions.
IoT Device Functionality
A specially designed wearable hardware unit equipped with multiple sensors including WiFi, 4G LTE, IMU (Inertial Measurement Unit), and GNSS. It operates in three phases: initializing, positioning (scanning WiFi signals via LTE), and sleeping. This device acts as the primary data collector for location estimation.
Sensor Fusion and Dead Reckoning
This involves combining data from different sensors like IMU (accelerometer/gyroscope) and WiFi signal measurements to estimate a user's position. Pedestrian dead reckoning uses this fused data at high sampling rates (e.g., 100Hz) to create a more accurate trajectory compared to lower rates.
Platform Independence
The system is designed so that the positioning service works regardless of the underlying mobile operating system (Android or iOS). By offloading signal scanning and data processing to a dedicated hardware device, users gain access to location services without being constrained by OS restrictions.

Terminology

Summary

KAIST Indoor Localization System (KAILOS) was introduced in 2014 and became one of the world-first complete indoor positioning solutions. p. 0 This study proposes an extended architecture of KAILOS to make use of the IoT device for removing the barriers of the mobile-app-based approach and conveniently providing indoor positioning service. p. 0 The IoT-based approach is promising and can be a crucial feature to widen applications of indoor localization services. p. 0

Motivation for the Extended Architecture

The existing KAILOS system provides positioning services through mobile applications running on Android and IOS, but access to signals is often limited by the operating system. The platform restrictions, such as limitations on scanning frequency in Android or complete prohibition of WiFi signal scanning in iOS, significantly limit the scalability of KAILOS. p. 0 To eliminate this dependence on operating systems and enrich the applications of KAILOS, an extended architecture based on Internet of Things (IoT) is proposed. p. 0 This approach involves specially designed wearable devices that assist smartphone users in accessing KAILOS services regardless of the operating system. p. 0

System Architecture Components

The extended system involves several key components, including the IoT device and smartphone pair, a Frontend Server, a Back-end Server, a Database, and Map Registration tools. The back-end server is crucial as it manages the operation of other components and incorporates the KAILOS engine. p. 1 The KAILOS engine includes a set of filters, wifi-based location estimator, sensor fusion, pedestrian dead reckoning, hybrid localization, and other advanced data processing algorithms. p. 1 The Front-end server is responsible for user interface and position visualization by connecting to the back-end side to inquire recorded location of the associated IoT device. p. 1

IoT Device Design and Functionality

The designed IoT device incorporates a processing Unit (MCU), WiFi, 4G LTE, BLE, IMU sensor, GNSS, Flash memory, and USB communication. The hardware design utilizes a 32-bit MCU to coordinate the operation of the remaining components. p. 3 The device is equipped with sensors such as a light intensity sensor for Indoor/Outdoor context switching detection and a barometer for floor detection. p. 3 Software design involves three phases: Initializing Phase, Positioning Phase, and Sleeping Phase. p. 4 During the positioning phase, the device scans available WiFi signals and sends them to the server via LTE to estimate location. p. 4

Experimental Results and Performance Gains

Experiments conducted on the KAIST campus demonstrated that the performance of the IoT device is better than the android app in terms of accuracy, scanning frequency, and time per scan. Specifically, Table III shows that for both IoT Device and Smartphone OS Android or IOS, the IoT-based approach offers non-OS-constraint, Free App-Installation, and Group User advantages over the conventional one. p. 5 Furthermore, in pedestrian dead reckoning experiments using different sampling rates (25Hz, 50Hz, and 100Hz), the trajectory corresponding to 100 Hz data had the best matching with ground-truth trajectory. p. 6 The higher sampling rate resulted in a better performance of the positioning algorithm. p. 6

Future Work and Advantages

The advantages of having a dedicated positioning hardware device are that it frees users from mobile platform limitations, allows for arbitrarily adjusted signal collection periods for each sensor, and enables the development of optimal sensor access protocols. Future works plan to implement the full functionality of the IoT device for the extended KAILOS system. p. 7 Additionally, hardware design improvements are planned to make it more lightweight, have a longer battery life, and support dual-band WiFi (2. p. 74GHz and 5GHz). p. 1 The study is considered the very first step of producing an indoor/outdoor positioning SoC for any wearable device. p. 7

Conclusion

In a nutshell, there are many advantages when a dedicated positioning hardware device equipped with various sensors is prepared. This approach provides high-quality data for the location server by removing OS restrictions. p. 2 The results demonstrated that the approach is promising and will be a great opportunity to popularize applications of indoor positioning in real life. p. 6

References

[1] D. Han, S. Lee, and S. p. 7 Kim, “Kailos: Kaist indoor locating system,” in 2014 International Conference on Indoor Positioning and Indoor Navigation (IPIN). p. 7 IEEE, 2014, pp. p. 7 p. 7 615–619.

[2] F. Zafari, A. Gkelias, and K. p. 7 K. Leung, “A survey of indoor localization systems and technologies,” IEEE Communications Surveys & Tutorials, vol. p. 7 21, no. 3, pp. 2568–2599, 2019. p. 7

[3] Z. Jianyong, L. p. 7 Haiyong, C. p. 7 Zili, and L. p. 7 Zhaohui, “Rssi based bluetooth low energy indoor positioning,” in 2014 International Conference on Indoor Positioning and Indoor Navigation (IPIN). p. 7 IEEE, 2014, pp. 526–533.

[4] S. Monfared, T. p. 7-H. Nguyen, L. Petrillo, P. p. 7 De Doncker, and F. p. 7 Horlin, “Experimental demonstration of ble transmitter positioning based on aoa estimation,” in 2018 IEEE 29th Annual International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC). p. 7 IEEE, 2018, pp. p. 7 p. 7 856–859.

[5] D. Giovanelli, E. p. 7 Farella, D. p. 7 Fontanelli, and D. p. 7 Macii, “Bluetoothbased indoor positioning through tof and rssi data fusion,” in 2018 International Conference on Indoor Positioning and Indoor Navigation (IPIN). p. 7 IEEE, 2018, pp. 1–8.

[6] C. Zhang, M. Kuhn, B. Merkl, A. E. Fathy, and M. p. 7 Mahfouz, “Accurate uwb indoor localization system utilizing time difference of arrival approach,” in 2006 IEEE radio and wireless symposium. p. 7 IEEE, 2006, pp. p. 7 515–518.

[7] M. A. Stelios, A. p. 7 D. Nick, M. T. Effie, K. M Dimitris, and S C Thomopoulos, “An indoor localization platform for ambient assisted living using uwb,” in Proceedings of the 6th international conference on advances in mobile computing and multimedia, 2008, pp. p. 7 178–182.

[8] A. Poulose and D. p. 7 S. Han, “Uwb indoor localization using deep learning lstm networks,” Applied Sciences, vol. p. 7 10, no. 18, p. 6290, 2020. p. 7

[9] R. L. Weaver, “Anderson localization of ultrasound,” Wave motion, vol. p. 7 12, no. 2, pp. 129–142, 1990. p. 7

[10] F Hoeflinger, A Saphala, D J Schott, L M Reindl, and C Schindelhauer, “Passive indoor-localization using echoes of ultrasound signals,” in 2019 International Conference on Advanced Information Technologies (ICAIT). p. 7 IEEE, 2019, pp. p. 7 60–65.

[11] D A Kuban, L Dong, R Cheung, E Strom, and R De Crevoisier, “Ultrasound-based localization,” in Seminars in radiation oncology, vol. p. 7 15, no. 3. Elsevier, 2005, pp. p. 7 180–191.

[12] D Hahnel, W Burgard, D Fox, K Fishkin, and M Philipose, “Mapping and localization with rfid technology,” in IEEE International Conference on Robotics and Automation, 2004. p. 7 Proceedings. p. 7 ICRA’04. 2004, vol. 1. IEEE, 2004, pp. p. 7 1015–1020. p. 7

[13] F Xiao, Z Wang, N Ye, R Wang, and X. p. 7-Y Li, “One more tag enables fine-grained rfid localization and tracking,” IEEE/ACM Transactions on Networking, vol. p. 7 26, no. 1, pp. 161–174, 2017. p. 7

[14] M Bouet and A L Dos Santos, “Rfid tags: Positioning principles and localization techniques,” in 2008 1st IFIP Wireless Days. p. 7 Ieee, 2008, pp. p. 7 1–5.

[15] V Bianchi, P Ciampolini, and I De Munari, “Rssi-based indoor localization and identification for zigbee wireless sensor networks in smart homes,” IEEE Transactions on Instrumentation and Measurement, vol. p. 7 68, no. 2, pp. 566–575, 2018. p. 7

[16] M Sugano, T Kawazoe, Y Ohta, and M Murata, “Indoor localization system using rssi measurement of wireless sensor network based on zigbee standard,” Wireless and Optical Communications, vol. p. 7 538, pp. 1–6, 2006. p. 7

[17] J Blumenthal, R Grossmann, F Golatowski, and D Timmermann, “Weighted centroid localization in zigbee-based sensor networks,” in 2007 IEEE international symposium on intelligent signal processing. p. 7 IEEE, 2007, pp. p. 7 1–6.

[18] J Luo, L Fan, and H Li, “Indoor positioning systems based on visible light communication: State of the art,” IEEE Communications Surveys & Tutorials, vol. p. 7 19, no. 4, pp. 2871–2893. p. 7

[19] Z Zhou, M Kavehrad, and P Deng, “Indoor positioning algorithm using light-emitting diode visible light communications,” Optical engineering, vol. p. 7 51, no. 8, p. 085009, 2012. p. 7

[20] W Zhang, M S Chowdhury, and M Kavehrad, “Asynchronous indoor positioning system based on visible light communications,” Optical Engineering, vol. p. 7 53, no. 4, p. 045105, 2014. p. 7

[21] C Sertatıl, M A Altınkaya, and K Raoof, “A novel acoustic indoor localization system employing cdma,” Digital Signal Processing, vol. p. 7 22, no. 3, pp. 506–517, 2012. p. 7

[22] W Huang, Y Xiong, X.-Y Li, H Lin, X Mao, P Yang, Y Liu, and X Wang, “Swadloon: Direction finding and indoor localization using acoustic signal by shaking smartphones,” IEEE Transactions on Mobile Computing, vol. p. 7 14, no. 10, pp. 2145–2157. p. 7

[23] D Han, S Jung, M Lee, and G Yoon, “Building a practical wi-fi-based indoor navigation system,” IEEE Pervasive Computing, vol. p. 7 13, no. 2, pp. 72–79.

[24] M Kotaru, K Joshi, D Bharadia, and S Katti, “Spotfi: Decimeter level localization using wifi,” in Proceedings of the 2015 ACM Conference on Special Interest Group on Data Communication, 2015, pp. p. 7 269–282.

[25] C.-H. Lim, Y Wan, B.-P. Ng, and C.-M. S See, “A real-time indoor wifi localization system utilizing smart antennas,” IEEE Transactions on Consumer Electronics, vol. p. 7 53, no. 2, pp. 618–622, 2007. p. 7

[26] M Lee and D Han, “Voronoi tessellation based interpolation method for wi-fi radio map construction,” IEEE Communications Letters, vol. p. 7 16, no. 3, pp. 404–407, 2012. p. 7

[27] J.-S Lim, W.-H Jang, G.-W Yoon, and D. p. 7-S Han, “Radio map update automation for wifi positioning systems,” IEEE Communications Letters, vol. p. 7 17, no. 4, pp. 693–696.

[28] “https://developer. p. 7android.com/guide/topics/connectivity/wifi-scan. p. 7”.

[29] S Madgwick et al. p. 7, “An efficient orientation filter for inertial and inertial/magnetic sensor arrays,” Report x-io and University of Bristol (UK), vol. p. 7 25, pp. 113–118, 2010. p. 7

[30] R Mahony, T Hamel, and J-M Pflimlin, “Nonlinear complementary filters on the special orthogonal group,” IEEE Transactions on automatic control, vol. p. 7 53, no. 5, pp. 1203–1218. p. 7

[31] O J Woodman, “An introduction to inertial navigation,” University of Cambridge, Computer Laboratory, Tech. p. 7 Rep., 2007.

[32] A R Jimenez, F Seco, C Prieto, and J Guevara, “A comparison of pedestrian dead-reckoning algorithms using a low-cost mems imu,” in 2009 IEEE International Symposium on Intelligent Signal Processing. p. 7 IEEE, 2009, pp. p. 7 37–42.

[33] H Weinberg, “Using the adxl202 in pedometer and personal navigation applications,” Analog Devices AN-602 application note, vol. p. 7 2, no. 2, pp. 1–6, 2002. p. 7

[34] “The performance of the IoT device is better than the android app in terms of accuracy, scanning frequency, and time per scan. p. 5”.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Expanded system capability by utilizing a dedicated positioning hardware device equipped with multiple connectivities and sensors, allowing for continuous data collection at high sampling rates to feed the KAILOS engine for estimating the precise location.

  2. Overcoming operating system restrictions by having a dedicated IoT device handle data collection, which removes the barriers of the mobile-app-based approach and allows users to easily access locating services via mobile web browsers by scanning a barcode printed on the IoT device without installing any smartphone application.

  3. Enhanced localization accuracy through improved sensor fusion capabilities enabled by high sampling rates, as demonstrated by pedestrian dead reckoning algorithms that utilize accelerometer and gyroscope data with higher sampling rates resulting in the best matching trajectory compared to lower rates.

  4. Improved robustness of wifi fingerprinting results by implementing a data pre-processing procedure where the device detect[s] and remove[s] the abnormal APs from the list by checking the missing information of each AP and then selecting only top 20 ranked APs, which can enhance the robustness of wifi-fingerprinting and estimation results.

  5. Creation of a plug-and-play service where users can access locating services regardless of the operating system, specifically solving limitations where the iOS operating system completely prohibits scan[ning] of WiFi signals from the applications.

Related papers